- Adjusted faulties and warnings in tests for IGES and STEP files to reflect updated results.
- Corrected tolerance values in multiple tests to ensure accuracy in shape validation.
- Updated expected label counts and properties in several test cases to align with new outputs.
- Modified error messages and expected results in HLR and offset tests for consistency.
- Refined metadata checks in GLTF and STEP tests to match revised reference sizes and values.
- Update Improvements cases with removing TODO
- Added new GTests covering multiple historical regressions (intersection, projection, pipe shell, boolean ops, fillet, distances, gp transforms, string hashing).
- Registered new test sources in the relevant `GTests/FILES.cmake` lists.
- Removed legacy Tcl tests and removed the associated QADraw commands from `QABugs_*.cxx`.
- Removed multiple legacy DRAW test scripts and several QABugs DRAW command implementations.
- Added new GTest suites covering the migrated regressions in ModelingData/ModelingAlgorithms/FoundationClasses/DataExchange/ApplicationFramework.
- Updated multiple `FILES.cmake` lists to compile/link the new tests; introduced an additional `STEPControl_Writer::SetShapeFixParameters()` overload.
Refactor GeomBndLib classes for old version of bounding box calculations
Can be fixed later.
- Added new test case for BSplineCurve trimmed range comparison with BndLib.
- Enhanced GeomBndLib_BSplineCurve to handle parameter adjustments for periodic curves.
- Updated GeomBndLib_BSplineCurve2d to improve bounding box calculations.
- Refined GeomBndLib_BSplineSurface to use grid sampling for bounding box determination.
- Optimized GeomBndLib_BezierCurve and GeomBndLib_BezierCurve2d for bounding box calculations.
- Simplified GeomBndLib_SurfaceOfExtrusion and GeomBndLib_SurfaceOfRevolution by leveraging GeomBndLib_OtherSurface for bounding box computations.
- Improved GeomBndLib_Torus to utilize BndLib for bounding box calculations, including handling degenerate cases.
- Replace monolithic switch statements in BndLib_Add3dCurve, BndLib_AddSurface, and BndLib_Add2dCurve with thin wrappers delegating to GeomBndLib_Curve, GeomBndLib_Surface, and GeomBndLib_Curve2d respectively.
- Remove now-dead internal helpers AddGenCurv, AddGenSurf, and BndLib_Box2dCurve. Public BndLib API is preserved unchanged.
- Implement proper BoxOptimal() in GeomBndLib_OffsetSurface: try the analytic equivalent surface first (offset plane -> plane, offset sphere -> sphere), then fall back to OtherSurface PSO sampling for general cases.
- Refactor GeomBndLib_OffsetCurve2d to share exact fast paths for line and circle offsets between Box() and BoxOptimal(), matching the 3D OffsetCurve pattern; BoxOptimal falls back to OtherCurve2d PSO for general curves.
- Update tests to reflect tighter bounds from GeomBndLib delegation.
- Deletion of 20 legacy DRAW test files (.tcl format) from tests/bugs/ directories
- Addition of 15 new GTest C++ test files across multiple modules
- Removal of corresponding QA command implementations from TKQADraw
- Removed 37 DRAW test scripts from `tests/bugs/` directories
- Added 31 new GTest C++ test files in appropriate `GTests/` directories
- Removed corresponding QAcommands implementations from QABugs source files
- Updated CMake FILES.cmake files to include new test files
Integrated DE plugin functionality.
Reworked DE components:
- TKDESTEP: Handling STEP file format.
- TKDEOBJ: Handling OBJ file format.
- TKDEIGES: Handling IGES file format.
- TKDEGLTF: Handling GLTF file format.
- TKDEVRML: Handling VRML file format.
- TKDEPLY: Handling PLY file format.
- TKDESTL: Handling STL file format.
Reworked DE DRAW components:
TKXSDRAWSTEP: Container for DE command to work with STEP.
TKXSDRAWOBJ: Container for DE command to work with OBJ.
TKXSDRAWIGES: Container for DE command to work with IGES.
TKXSDRAWGLTF: Container for DE command to work with GLTF.
TKXSDRAWVRML: Container for DE command to work with VRML.
TKXSDRAWPLY: Container for DE command to work with PLY.
TKXSDRAWSTL: Container for DE command to work with STL.
TKXSDRAW rework to be base DRAW plugin to keep DE session and utils.
Updated documentation
Updated samples
0030442: Mesh - broken triangulation on pipe shape
Scale down min size parameter for NURBS taking into account its U and V resolution in order to prevent comparison of 2d parameters with 3d value involved in filtering process.
0032422: Mesh - Weird rendering
0029641: Mesher produce 'bad' result for extruded spline with given deviation coefficient
Added method BRepMesh_NURBSRangeSplitter::getUndefinedInterval() intended to compute checkpoint parameters for those NURBS surfaces which have no intervals at all. In this case number of poles is used to produce artificial regular grid which can be refined further. Add at least one midpoint for surfaces with one interval and only two poles.
Added BRepMesh_ExtrusionRangeSplitter and BRepMesh_UndefinedRangeSplitter derivatives from BRepMesh_NURBSRangeSplitter intended to handle special cases of extrusion surfaces and general surfaces with undefined parameters.
The following classes have been removed as obsolete:
- BRepAlgo_BooleanOperation
- BRepAlgo_Fuse
- BRepAlgo_Cut
- BRepAlgo_Common
- BRepAlgo_Section
The corresponding classes from BRepAlgoAPI package have to be used instead.
Draw commands:
- fuse
- cut
- common
- section/psection
have also been removed as obsolete.
The corresponding commands for modern Boolean operations algorithm (bfuse/bcut/bcommon/bsection) have to be used instead.
Adjustment of the test cases to use the commands for modern algorithm.
Progress indication mechanism is refactored to support incrementing progress within multithreaded algorithms.
The class Message_ProgressIndicator is only an interface to the user application.
It accumulates the progress provided by progress scopes.
The counter is protected by mutex for thread-safety.
The new class Message_ProgressScope replacing Message_ProgressSentry should be used to advance the progress.
The scopes are nested to each other to reflect the nested nature of operations.
The new class Message_ProgressRange should be used to pass the progress to sub-scopes.
All OCCT algorithms involving progress indication have been updated to new API.
Improvements in Draw_ProgressIndicator:
- Separate console mode has been added in order to make possible to put the progress into std::cout instead
or in addition to the draw interpreter, instead of trigger option "-tclOutput".
- Treatment of Ctrl-Break signal has been added.
Now any operation can be aborted by Ctrl-C or Ctrl-Break keystroke.
Added new test case 'perf fclasses progr_par' for testing of parallel work of the progress.
Draw_Interpretor, CommandCmd() - catched exceptions and messages put into Tcl string result
before throwing a Tcl exception (return 1) are now print in intense red (using Message::SendFail()).
Duplication of exception message in std::cout and Tcl output has been removed.
Draw Harness plugins have been updated to use either Message::SendFail() or theDI instead of std::cout/std::cerr
for printing colored error message before throwing a Tcl exception.
Approx/Approx_SameParameter.cxx,hxx:
Class Approx_SameParameter refactoring. Logic is changed in many places to unify usage, simplify maintenance.
Method Curve2d() is changed to return Geom2d_Curve instead of Geom2d_BSplineCurve. Corresponding message is added to the upgrade guide.
.lxx file is merged into .hxx.
Tangent computation is extracted into special method.
Comparing number of sample points after CheckSameParameter(...) is added to define cases with projection fails.
Undesirable behavior when curves are not same parameterized is fixed.
Geom2dAdaptor/Geom2dAdaptor.cxx: treatment of offset curve is added
Adaptor3d/Adaptor3d_TopolTool.cxx: minor improvement of performance for BSpline surfaces with huge number of knots
Tests were modified according to new behavior of sameparameter algorithm
Fixed bugs that occurred when using the default std::cout from Message::DefaultMessenger() instead of Draw_Printer
A dedicated option was added to Draw_ProgressIndicator, for outputting data to the tcl when performing tests
Added -tclOutput parameter to XProgress command
Implementation of method "IsDeleted(...)" for MakeRevol and MakePrism algorithms.
Problem (exception) occurs during history building and was caused by an attempt to obtain generated shape for subshape, which was really "deleted" by algorithm - this input subshape and its possible generated shape was not used in result.
The reason of this problem is in wrong work of classifier algorithm (see the message ~0080992 to the issue #30354). Therefore, the algorithm of IntTools_FClass2d class has been improved. Namely, now orientation of the polygon is computed from area-criterion instead of angle. As result, some simplification of the method IntTools_FClass2d::Init(...) has been made.
<!break>
1. New constructor has been added to the class CSLib_Class2d. It allows applying TColgp_SequenceOfPnt2d.
2. DRAW-commands "addpolygonnode" and "polygonprops" have been created. They are covered by the test case "tests/geometry/2dpolygon/A1".
3. New method Poly::PolygonProperties(...) has been created. See help for detailed information.
4. New testgrid "lowalgos classifier" has been created.
1. Check whether the mesh satisfies the required angular deflection has been amended. Namely normals (to the surface) in the ends of any not "frontier" link are made collinear (with the given angular tolerance).
2. New parameters AngleInterior and DeflectionInterior have been added in IMeshTools_Parameters structure.
3. In case of thin long faces with internal edges, add points of internal edges to control parameters using grabParamsOfInternalEdges() in order to avoid aberrations on its ends. Disable addition of parameters from boundary edges in case of BSpline surface. Deviation can be controlled through the deflection parameter.
4. Grab parameters from edges in case if there is just a single interval on BSpline surface along U and V direction.
Removed tight connections between data structures, auxiliary tools and algorithms in order to create extensible solution, easy for maintenance and improvements;
Code is separated on several functional units responsible for specific operation for the sake of simplification of debugging and readability;
Introduced new data structures enabling possibility to manipulate discrete model of particular entity (edge, wire, face) in order to perform computations locally instead of processing an entire model.
The workflow of updated component can be divided on six parts:
* Creation of model data structure: source TopoDS_Shape passed to algorithm is analyzed and exploded on faces and edges. For each topological entity corresponding reflection is created in data model. Note that underlying algorithms use data model as input and access it via common interface which allows user to create custom data model with necessary dependencies between particular entities;
* Discretize edges 3D & 2D curves: 3D curve as well as associated set of 2D curves of each model edge is discretized in order to create coherent skeleton used as a base in faces meshing process. In case if some edge of source shape already contains polygonal data which suites specified parameters, it is extracted from shape and stored to the model as is. Each edge is processed separately, adjacency is not taken into account;
* Heal discrete model: source TopoDS_Shape can contain problems, such as open-wire or self-intersections, introduced during design, exchange or modification of model. In addition, some problems like self-intersections can be introduced by roughly discretized edges. This stage is responsible for analysis of discrete model in order to detect and repair faced problems or refuse model’s part for further processing in case if problem cannot be solved;
* Preprocess discrete model: defines actions specific for implemented approach to be performed before meshing of faces. By default, iterates over model faces and checks consistency of existing triangulations. Cleans topological faces and its adjacent edges from polygonal data in case of inconsistency or marks face of discrete model as not required for computation;
* Discretize faces: represents core part performing mesh generation for particular face based on 2D discrete data related to processing face. Caches polygonal data associated with face’s edges in data model for further processing and stores generated mesh to TopoDS_Face;
* Postprocess discrete model: defines actions specific for implemented approach to be performed after meshing of faces. By default, stores polygonal data obtained on previous stage to TopoDS_Edge objects of source model.
Component is now spread over IMeshData, IMeshTools, BRepMeshData and BRepMesh units.
<!break>
1. Extend "tricheck" DRAW-command in order to find degenerated triangles.
2. Class BRepMesh_FastDiscret::Parameters has been declared as deprecated.
3. NURBS range splitter: do not split intervals without necessity. Intervals are split only in case if it is impossible to compute normals directly on intervals.
4. Default value of IMeshTools_Parameters::MinSize has been changed. New value is equal to 0.1*Deflection.
5. Correction of test scripts:
1) perf mesh bug27119: requested deflection is increased from 1e-6 to 1e-5 to keep reasonable performance (but still reproducing original issue)
2) bugs mesh bug26692_1, 2: make snapshot of triangulation instead of wireframe (irrelevant)
Correction in upgrade guide.
1. New testgrid "lowalgos/intss" has been created. It will contain all test cases on geometrical intersection of two surfaces ("intersect" DRAW-command) and two faces ("bopcurves" DRAW-command).
2. New test case for the issue #28493 has been created because the problem is not reproduced on MASTER.
3. Test case (lowalgos/intss/bug24472) for the issue #29501 has been modified in order to check loops of the resulting intersection curves.
Bnd_OBB constructor from Bnd_Box is fixed for VOID input.
DRAW command bounding command is adjusted:
- Support of old syntax 'bounding shape'is restored.
- Exception on VOID bounding box is avoided.
- Arguments are handled in case-insensitive way.
- Options -s, -perfmeter, and ability to set result as first argument are removed as redundant.
- Help is moved to command definition.
Separate command OCC29311 is added (in QADraw) to do the same as option -perfmeter did; tests are updated.
The following improvements have been introduced in Boolean Operations algorithm s:
1. UBTree is replaced with EBTree in Boolean operations to be able to add/remove elements into the tree of bounding boxes.
2. Repeated (nested) intersection of sub-shapes is performed with argument vertices whose tolerances increased during the operation.
3. The algorithms of Edge/Edge and Edge/Face intersection have been improved for the cases when the intersection point is located close to the edge boundaries .
4. New procedure has been implemented to ensure forced creation of Edge/Face common blocks in cases when the edge is really close to the face.
5. Post-processing of Face/Face intersection results has been improved.
6. Extension of the planar faces for Plane/Plane intersection is avoided.
7. Builder Face now better classifies potentially internal edges relatively to new faces with filtering by bounding boxes.
Side effect changes:
1. IntTools_ShrunkRange now keeps the length of the valid range of the edge.
2. The method BOPDS_DS::UpdateEdgeTolerance() has been removed as unused (replaced by the BOPAlgo_PaveFiller::UpdateEdgeTolerance()).
Test case for the issue 0029900.
Test case for the issue 0029711.
Adjustments of the existing test cases.
Avoid using uninitialized variables.
The algorithm has been improved for the cases when the intersection line goes through the cone apex.
<!break>
1. All special points are put to the ALine forcefully (if they are true intersection point). Currently this step has not been implemented yet.
2. Now the tolerance of IntPatch_Point (put into ALine) is computed in order to cover the distance between it and the correspond ALine.
3. Test cases have been created.
4. Procedure of trimming IntAna_Curve has been improved.
5. Criterion when the discriminant of IntAna_Curve can be considered to be equal to 0 has been improved.
6. Methods IntAna_Curve::FindParameter(...) (and IntPatch_ALine::FindParameter(...)) currently returns list of all parameters corresponding the given point (IntAna_Curve can be self-interfered curve). Before the fix, this method always returned only one (randomly chosen) parameter.
7. Interfaces of the following methods have been changed: IntAna_Curve::FindParameter(...), IntPatch_ALine::FindParameter(...), IntPatch_ALine::ChangeVertex(...), IntPatch_SpecialPoints::AddPointOnUorVIso(...), IntPatch_SpecialPoints::AddSingularPole(...), IntPatch_WLineTool::ExtendTwoWLines().
8. Following methods have been added: IntAna_Quadric::SpecialPoints(...), IntPatch_ALineToWLine::GetSectionRadius(...), IntPatch_SpecialPoints::ProcessSphere(...), IntPatch_SpecialPoints::ProcessCone(...), IntPatch_SpecialPoints::GetTangentToIntLineForCone(...).
------------------
1) tests/boolean/volumemaker/C5
tests/boolean/volumemaker/C6
tests/boolean/volumemaker/E7
They are real IMPROVEMENTS. In the FIX (in compare with MASTER), section result between pairs of faces f2&f6 (C5), f3&f7 (C6) and f1&f5 (E7) is closed. Separated test cases have been created in order to focus on the problem with section. Bug #28503 has been fixed.
Correction in test cases.
Test parse rules are improved to recognize messages with word 'fail' or 'failure' as errors.
Test cases are corrected accordingly (TODO or REQUIRED statements added where fail messages were not noticed previously).
In the algorithm math_FunctionRoots, improve the case when it is needed to find the extremum of the function. Earlier, to solve this task the method of gold section was used. With the patch, firstly the algorithm tries to find zero value of the derivative function. In most cases it gives precise result. Secondly, the algorithm tries to find zero value of the function using the old approach. The algorithm chooses the best solution among two computed by different methods.
In the method PutStickPavesOnCurve of BOPAlgo_PaveFiller, forbid putting a vertex to the end of the curve if this end already has a vertex assigned to it. This allows getting rid of unwanted colliding of vertices.
In the method UpdatePaveBlocks of BOPAlgo_PaveFiller, make the check for micro edges more precise.
New category of tests "lowalgos" has been added. Tests for low level algorithms are to be put there. "2dinter" is a new group of tests in this category.
Introduction of the new key for "2dintersect" command, allowing printing the intersection state for each point.
It has the following syntax now:
"2dintersect curve1 [curve2] [-tol tol] [-state]"
Options:
-tol - allows changing the intersection tolerance (default value is 1.e-3);
-state - allows printing the intersection state for each point.
Correct the test case bugs/modalg_7/bug28274 to make proper checks of the result.
1. The class Bnd_OBB has been created to describe the Oriented Bounding Box.
2. Several key methods have been implemented: Bnd_OBB::IsOut(...), Bnd_OBB::Add(...) and Bnd_OBB::Enlarge(...).
3. Interface of Bnd_Box class has changed. New methods have been created. See Bnd_Box.hxx for detailed information.
4. BRepBndLib and Draw_Box classes have been amended in order to provide correct work with Bnd_OBB class.
5. Interface of "bounding" DRAW-command has been changed. Please see help for detailed information.
6. New DRAW-command "isbbinterf" has been created. Please see help for detailed information.
7. "boundingstr" and "optbounding" DRAW-commands have been eliminated because their function can be made by "bounding" DRAW-command (e.g. see tests/bugs/vis/buc60857 or samples/tcl/snowflake.tcl test cases).
8. Documentation has been updated.
Test for 0028167: Fillet has strange form at its end
Test for 0028168: Exception is raised during Boolean operation
Test for 0028194: BRepMesh - Standard_OutOfRange exception on valid shape
Test for 0028200: Invalid topology of the general fuse result
Test for 0028216: Intersection of a face and a solid is broken up leading to empty result of Boolean common operation
Test for 0028245: Result of Cells Builder algorithm becomes invalid after removal of internal boundaries on faces
Test for 0028247: Effect of minSize parameter of BRepMesh_IncrementalMesh seems to be too strong
Test for 0028274: BOPAlgo_MakerVolume fails to create solid
Test for 0028279: Greater oscillations and higher degree of resulting B-Spline in cylinder-cylinder intersections in 7.1.0
Test for 0028354: Filleting destroys shape if the filleted edge touches a seam edge
Test for 0028366: BOP Common fails with solid and planar face
Test for 0028379: BRepMesh produces mangled mesh for a cone
Test for 0028388: Boolean common of simple face and solid results in empty compound
Test for 0028393: Boolean cut produce wrong result.
Test for 0028402: Modeling - calculation of properties of complex compounds is slow
Test for 0028406: High tolerances after boolean operation on OCCT 6.9.1
Test for 0028694: IGES reader produces too small edge covered by its vertices
Test for 0028719: Mesh - Display issue for special model
Test for 0028108: Sweep fails in "Right Corner" mode
Test for 0028696: Offset 2D algorithm produces micro edges
Test for 0028700: BRepBuilderAPI_Sewing produces too small edge covered by its vertices
Test for 0028722: Conversion of a spherical face to a spline produces an invalid shape
Test for 0028739: Draft on face fails
Test for 0028662: Data Exchange - Exception during reading large STEP file.
Test for 0028768: ShapeFix slighly corrupts the source face
Test for 0028485: Fuse of two shapes using gluing and non-destructive options gives invalid result
Test for 0028500: Artifact in shaded view of the shape
Test for 0028523: Fixshape reverses the orientation of the face
Test for 0028544: Big tolerance value is returned by Implicit-parametric algorithm
Test for 0028571: BRepOffsetAPI_MakeOffset build invalid wire
Test for 0028572: Wrong result of the mkface command
Test for 0028595: Shifting 2d curves for non-periodic surfaces leads to incorrect result.
Test for 0028596: Erroneous fillet
Test for 0028640: BRepBuilderAPI_Transform build invalid shape
Test for 0028656: 3d offset modifies the input shape
Test for 0000077: BUC60866. The BRepFill_Pipe fails.
Test for 0000078: BUC60875. Pipe is created incorrectly on two wires.
Test for 0000082: BUC60908. Incomplete section of shell by plane.
Test for 0000083: BUC60912. Section of simple BSpline surfaces is performed too slow.
Test for 0000862: GeomAPI_ExtremaCurveCurve fails on given curves
Test for 0002442: Error in BRepClass3d_SolidClassifier
Test for 0003936: Face on a surface of extrusion is extended after import to IGES
Test for 0005081: BRepOffset_MakeOffsetShape algorithm does not return valid result.
Test for 0005145: Wrong result of projection of a circle on a sphere.
Test for 0014846: ShapeFix_Wireframe::FixWireGaps() works wrong on a shape with seam edge
Test for 0016424: Exception in reading of attached IGES file
Test for 0010377: Incorrect fuse result when objects tangent by planar face
Test for 0013565: Incorrect result of Common operation
Test for 0013566: Incorrect result of Extrema between a large circle and a line
Test for 0024632: Artifacts during Boolean cut operation on neighboring parts
Test for 0005582: Impossible to make offset on the shape with degenerated edge
1. The reason of exception has been eliminated.
2. Algorithm in IntPatch_WLineTool::JoinWLines(...) method has been modified in order to forbid join curves in the point where more than two intersection lines meet. More over, joining is forbidden if local curvature in the connection point is too big (see function CheckArgumentsToJoin(...) in the file IntPatch_WLineTool.cxx).
3. Interface of IntPatch_WLineTool::JoinWLines(...) method has been modified in order to reduce number of arguments.
4. Small corrections in IsSeamOrBound(...) static function has been made. Namely, check has been added if two boundaries are in the same period region but are too far each to other (see IntPatch_WLineTool.cxx, IsSeamOrBound(...) function, line # 532).
5. "Reversed" flag has been made local. Now, it is pure local characteristic: the algorithm decides itself, shall we reverse the argument order. This correction makes the algorithm more commutative (see issue #25404). However, IntPatch_WLineTool::JoinWLines(...) method can return non-commutative result.
6. Algorithm of searching small intersection curves has been improved.
7. New methods have been added in Bnd_Range class.
Some test cases have been adjusted according to their new behavior.
1. tests\bugs\modalg_6\bug26310_3
tests\bugs\modalg_6\bug26310_4
tests\bugs\moddata_2\bug235
tests\perf\modalg\bug26310_1
tests\bugs\modalg_5\bug24915
Logic of these cases has been changed. Mover over, additional check has been added in "bug26310_1" test case. Therefore, its performance will be slower than on the current MASTER.
2. tests\bugs\modalg_5\bug25292*
Scripts have been rewritten in order to make it more readable. Logic of these cases has not been changed.
1. The packages *QANewModTopOpe*, *QANewBRepNaming* and *QANewDBRepNaming* have been removed as containing obsolete features.
The corresponding QA commands (such as OCC252, OCC307 and OCC294) and test cases have also been removed.
2. The QA command buc60609 has been removed. The corresponding test case bugs/moddata_1/buc60609 has been rewritten using b2dclassify command.
1. Using appropriate intersection tolerance for splitting the degenerated edges in Boolean operations (void BOPAlgo_PaveFiller::FillPaves()).
2. Avoid creation of the wires consisting of degenerated edges only (BOPAlgo_WireSplitter).
3. Test case bugs/moddata_2/bug469 has been corrected to obtain valid result of operation. TODO statements have been removed from the case.
1. The algorithm BOPAlgo_ShellSplitter has been improved for the cases with multi-connected edges
to produce as many shells as possible from the given input faces.
2. Building tool prism in BRepFeat_MakePrism has been changed in order to avoid self-intersections
in the cases when the limiting faces are intersecting.
3. Test cases for the issue.
4. Test cases boolean/bcut_complex/N9 and boolean/gdml_private/ZH3 are improvements.
5. Test cases boolean/volumemaker/C5 and boolean/volumemaker/C6 has been marked as BAD due to found problem in intersection algorithm.
The results in these cases obtained on the branch are better than on master, but still not complete.
Adjusting test case bugs/moddata_2/bug469 for its current behavior.
1) In Views menu the check button item "Extended view commands" has been added. Pressing on it shows/hides the set of buttons in the main window that allow manipulating of view zoom/pan/rotate by mouse.
2) New category of commands "Vector and measurement Commands" has been added. The commands in this category allow simple calculations using 2D and 3D vectors, such as cross and dot products, computation of distances of points to other objects, and other functions.
3) The new command "pickf" has been added in "DRAW Variables management" category. It allows extracting a picked with mouse face included in some shape as a new variable.
4) New commands "del" and "era" have been added in "DRAW Variables management" category. They allow deleting (destructing) or erasing (from view) variables matched by glob pattern.
5) Missing help for some commands like "don", "disp" and others has been added.
1. Earlier we could not put any IntPatch_Point to the intersection curve. The fix makes the algorithm of IntPatch_Points searching more precise. It is achieved by redetermination of earlier found vertices with help of minimization the distance between boundary of one intersection argument and another intersection argument (surface).
2. Additional check has been added, if IntPatch_Point adjusted to the domain boundary is true intersection point.
3. Method Contap_ArcFunction::Surface() has been added.
4. Method LastComputedPoint() has been added for IntPatch_ArcFunction and Contap_ArcFunction classes.
5. Correction in FindMaxDistance() method (see IntTools_FaceFace.cxx file) according to pure Golden-ratio minimization algorithm. Earlier this function worked wrong with small searching intervals.
6. Insignificant correction in math_BrentMinimum.cxx file (elimination of "defines").
Creation of test case for issues #27221 an #27252.
Adjusting some test cases according to their new behavior.
Correction according to the last remarks.
Small correction of shape names for issue CR27252
Test case for issue 28210
Small correction of test case for issue 28210
Draw command 'proj' has been improved:
- Add possibility to pass the starting point. If it is passed than the algorithm Extrema_GenLocateExtPS is used instead of standard projection.
- Make the output of the command more clear.
Test case bugs/moddata_3/bug28196 has been added.
