mirror of
https://github.com/Open-Cascade-SAS/OCCT.git
synced 2026-05-11 10:10:56 +08:00
9026dea8d2
Test for 0028167: Fillet has strange form at its end
Test for 0028168: Exception is raised during Boolean operation
Test for 0028194: BRepMesh - Standard_OutOfRange exception on valid shape
Test for 0028200: Invalid topology of the general fuse result
Test for 0028216: Intersection of a face and a solid is broken up leading to empty result of Boolean common operation
Test for 0028245: Result of Cells Builder algorithm becomes invalid after removal of internal boundaries on faces
Test for 0028247: Effect of minSize parameter of BRepMesh_IncrementalMesh seems to be too strong
Test for 0028274: BOPAlgo_MakerVolume fails to create solid
Test for 0028279: Greater oscillations and higher degree of resulting B-Spline in cylinder-cylinder intersections in 7.1.0
Test for 0028354: Filleting destroys shape if the filleted edge touches a seam edge
Test for 0028366: BOP Common fails with solid and planar face
Test for 0028379: BRepMesh produces mangled mesh for a cone
Test for 0028388: Boolean common of simple face and solid results in empty compound
Test for 0028393: Boolean cut produce wrong result.
Test for 0028402: Modeling - calculation of properties of complex compounds is slow
Test for 0028406: High tolerances after boolean operation on OCCT 6.9.1
Test for 0028694: IGES reader produces too small edge covered by its vertices
Test for 0028719: Mesh - Display issue for special model
Test for 0028108: Sweep fails in "Right Corner" mode
Test for 0028696: Offset 2D algorithm produces micro edges
Test for 0028700: BRepBuilderAPI_Sewing produces too small edge covered by its vertices
Test for 0028722: Conversion of a spherical face to a spline produces an invalid shape
Test for 0028739: Draft on face fails
Test for 0028662: Data Exchange - Exception during reading large STEP file.
Test for 0028768: ShapeFix slighly corrupts the source face
Test for 0028485: Fuse of two shapes using gluing and non-destructive options gives invalid result
Test for 0028500: Artifact in shaded view of the shape
Test for 0028523: Fixshape reverses the orientation of the face
Test for 0028544: Big tolerance value is returned by Implicit-parametric algorithm
Test for 0028571: BRepOffsetAPI_MakeOffset build invalid wire
Test for 0028572: Wrong result of the mkface command
Test for 0028595: Shifting 2d curves for non-periodic surfaces leads to incorrect result.
Test for 0028596: Erroneous fillet
Test for 0028640: BRepBuilderAPI_Transform build invalid shape
Test for 0028656: 3d offset modifies the input shape
Test for 0000077: BUC60866. The BRepFill_Pipe fails.
Test for 0000078: BUC60875. Pipe is created incorrectly on two wires.
Test for 0000082: BUC60908. Incomplete section of shell by plane.
Test for 0000083: BUC60912. Section of simple BSpline surfaces is performed too slow.
Test for 0000862: GeomAPI_ExtremaCurveCurve fails on given curves
Test for 0002442: Error in BRepClass3d_SolidClassifier
Test for 0003936: Face on a surface of extrusion is extended after import to IGES
Test for 0005081: BRepOffset_MakeOffsetShape algorithm does not return valid result.
Test for 0005145: Wrong result of projection of a circle on a sphere.
Test for 0014846: ShapeFix_Wireframe::FixWireGaps() works wrong on a shape with seam edge
Test for 0016424: Exception in reading of attached IGES file
Test for 0010377: Incorrect fuse result when objects tangent by planar face
Test for 0013565: Incorrect result of Common operation
Test for 0013566: Incorrect result of Extrema between a large circle and a line
Test for 0024632: Artifacts during Boolean cut operation on neighboring parts
Test for 0005582: Impossible to make offset on the shape with degenerated edge
41 lines
1.7 KiB
Plaintext
41 lines
1.7 KiB
Plaintext
puts "TODO OCC14846 ALL: Faulty shapes in variables faulty_1 to faulty_"
|
|
|
|
puts "========"
|
|
puts "OCC14846"
|
|
puts "========"
|
|
puts ""
|
|
###########################################################################
|
|
# ShapeFix_Wireframe::FixWireGaps() works wrong on a shape with seam edge
|
|
###########################################################################
|
|
|
|
restore [locate_data_file bug14846_Surf_Top.brep] a
|
|
|
|
checkshape a
|
|
fixwgaps result a
|
|
checkshape result
|
|
|
|
set bug_info_inp [string trim [lindex [tolerance a] 1]]
|
|
set bug_info_inp [string trim [string range $bug_info_inp [expr {[string last "=" $bug_info_inp] + 1}] [expr {[string length $bug_info_inp] - 1}]]]
|
|
|
|
set bug_info_out [string trim [lindex [tolerance result] 1]]
|
|
set bug_info_out [string trim [string range $bug_info_out [expr {[string last "=" $bug_info_out] + 1}] [expr {[string length $bug_info_out] - 1}]]]
|
|
|
|
set tmp_i [string trim [string range $bug_info_inp [expr {[string last "." $bug_info_inp] + 1}] [expr {[string length $bug_info_inp] - 1}]]]
|
|
set tmp_o [string trim [string range $bug_info_out [expr {[string last "=" $bug_info_out] + 1}] [expr {[string length $bug_info_out] - 1}]]]
|
|
|
|
set bug_info_value 0
|
|
if {[string length $bug_info_inp] < [string length $bug_info_out]} {
|
|
set bug_info_value [string length $bug_info_inp]
|
|
} else {
|
|
set bug_info_value [string length $bug_info_out]
|
|
}
|
|
if {$bug_info_value > 8} {
|
|
set bug_info_value 8
|
|
}
|
|
set bug_info_inp [string trim [string range $bug_info_inp 0 [expr {[string last "." $bug_info_inp] + $bug_info_value}]]]
|
|
set bug_info_out [string trim [string range $bug_info_out 0 [expr {[string last "." $bug_info_out] + $bug_info_value}]]]
|
|
|
|
if {$bug_info_out > $bug_info_inp} {
|
|
puts "OCC14846 is reproduced. Tolerance is increased after fixwgaps."
|
|
}
|