Remove license check on Ubuntu 22.04

The configuration is duplicate as it is also run on 24.04.

Pick-to: 6.11 6.10 6.8
Task-number: QTQAINFRA-7146
Change-Id: Icbd1f7379cb1f23ed8c818f25aa3e09c5fcb5a45
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>

.gitmodules

@@ -1,40 +1,40 @@
 [submodule "qtbase"]
 	path = qtbase
 	url = ../qtbase.git
-	branch = 6.11.0
+	branch = dev
 	status = essential
 [submodule "qtsvg"]
 	depends = qtbase
 	path = qtsvg
 	url = ../qtsvg.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtdeclarative"]
 	depends = qtbase
 	recommends = qtimageformats qtshadertools qtsvg qtlanguageserver
 	path = qtdeclarative
 	url = ../qtdeclarative.git
-	branch = 6.11.0
+	branch = dev
 	status = essential
 [submodule "qtactiveqt"]
 	depends = qtbase
 	path = qtactiveqt
 	url = ../qtactiveqt.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtmultimedia"]
 	depends = qtbase qtshadertools
 	recommends = qtdeclarative qtquick3d
 	path = qtmultimedia
 	url = ../qtmultimedia.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qttools"]
 	depends = qtbase
 	recommends = qtdeclarative qtactiveqt
 	path = qttools
 	url = ../qttools.git
-	branch = 6.11.0
+	branch = dev
 	status = essential
 [submodule "qtxmlpatterns"]
 	depends = qtbase
@@ -47,7 +47,7 @@
 	depends = qttools
 	path = qttranslations
 	url = ../qttranslations.git
-	branch = 6.11.0
+	branch = dev
 	status = essential
 	priority = 30
 [submodule "qtdoc"]
@@ -55,7 +55,7 @@
 	recommends = qtmultimedia qtshadertools qttasktree qtwebengine
 	path = qtdoc
 	url = ../qtdoc.git
-	branch = 6.11.0
+	branch = dev
 	status = essential
 	priority = 40
 [submodule "qtrepotools"]
@@ -68,7 +68,7 @@
 	depends = qtbase
 	path = qtqa
 	url = ../qtqa.git
-	branch = 6.11.0
+	branch = dev
 	status = essential
 	priority = 50
 [submodule "qtlocation"]
@@ -76,21 +76,21 @@
 	recommends = qtdeclarative
 	path = qtlocation
 	url = ../qtlocation.git
-	branch = 6.11.0
+	branch = dev
 	status = preview
 [submodule "qtpositioning"]
 	depends = qtbase
 	recommends = qtdeclarative qtserialport
 	path = qtpositioning
 	url = ../qtpositioning.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtsensors"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtsensors
 	url = ../qtsensors.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtsystems"]
 	depends = qtbase
@@ -117,61 +117,61 @@
 	recommends = qtdeclarative
 	path = qtconnectivity
 	url = ../qtconnectivity.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtwayland"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtwayland
 	url = ../qtwayland.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qt3d"]
 	depends = qtbase
 	recommends = qtdeclarative qtshadertools qtmultimedia
 	path = qt3d
 	url = ../qt3d.git
-	branch = 6.11.0
+	branch = dev
 	status = deprecated
 [submodule "qtimageformats"]
 	depends = qtbase
 	path = qtimageformats
 	url = ../qtimageformats.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtserialbus"]
 	depends = qtbase
 	recommends = qtserialport
 	path = qtserialbus
 	url = ../qtserialbus.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtserialport"]
 	depends = qtbase
 	path = qtserialport
 	url = ../qtserialport.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtwebsockets"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtwebsockets
 	url = ../qtwebsockets.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtwebchannel"]
 	depends = qtbase
 	recommends = qtdeclarative qtwebsockets
 	path = qtwebchannel
 	url = ../qtwebchannel.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtwebengine"]
 	depends = qtdeclarative
 	recommends = qtwebchannel qttools qtpositioning
 	path = qtwebengine
 	url = ../qtwebengine.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 	priority = 10
 [submodule "qtcanvas3d"]
@@ -185,28 +185,28 @@
 	recommends = qtwebengine
 	path = qtwebview
 	url = ../qtwebview.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtcharts"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtcharts
 	url = ../qtcharts.git
-	branch = 6.11.0
+	branch = dev
 	status = deprecated
 [submodule "qtdatavis3d"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtdatavis3d
 	url = ../qtdatavis3d.git
-	branch = 6.11.0
+	branch = dev
 	status = deprecated
 [submodule "qtvirtualkeyboard"]
 	depends = qtbase qtdeclarative qtsvg
 	recommends = qtmultimedia
 	path = qtvirtualkeyboard
 	url = ../qtvirtualkeyboard.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtgamepad"]
 	depends = qtbase
@@ -219,27 +219,27 @@
 	depends = qtbase qtdeclarative
 	path = qtscxml
 	url = ../qtscxml.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtspeech"]
 	depends = qtbase qtmultimedia
 	recommends = qtdeclarative
 	path = qtspeech
 	url = ../qtspeech.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtnetworkauth"]
 	depends = qtbase
 	path = qtnetworkauth
 	url = ../qtnetworkauth.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtremoteobjects"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtremoteobjects
 	url = ../qtremoteobjects.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtwebglplugin"]
 	depends = qtbase qtwebsockets
@@ -252,107 +252,107 @@
 	depends = qtbase qtdeclarative
 	path = qtlottie
 	url = ../qtlottie.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtquicktimeline"]
 	depends = qtbase qtdeclarative
 	path = qtquicktimeline
 	url = ../qtquicktimeline
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtquick3d"]
 	depends = qtbase qtdeclarative qtshadertools
 	recommends = qtquicktimeline
 	path = qtquick3d
 	url = ../qtquick3d.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtshadertools"]
 	depends = qtbase
 	path = qtshadertools
 	url = ../qtshadertools.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qt5compat"]
 	depends = qtbase qtdeclarative
 	path = qt5compat
 	url = ../qt5compat.git
-	branch = 6.11.0
+	branch = dev
 	status = deprecated
 [submodule "qtcoap"]
 	depends = qtbase
 	path = qtcoap
 	url = ../qtcoap.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtmqtt"]
 	depends = qtbase qtdeclarative
 	recommends = qtwebsockets
 	path = qtmqtt
 	url = ../qtmqtt.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtopcua"]
 	depends = qtbase qtdeclarative
 	path = qtopcua
 	url = ../qtopcua.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtlanguageserver"]
 	depends = qtbase
 	path = qtlanguageserver
 	url = ../qtlanguageserver.git
-	branch = 6.11.0
+	branch = dev
 	status = preview
 [submodule "qthttpserver"]
 	depends = qtbase
 	recommends = qtwebsockets
 	path = qthttpserver
 	url = ../qthttpserver.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtquick3dphysics"]
 	depends = qtbase qtdeclarative qtquick3d qtshadertools
 	path = qtquick3dphysics
 	url = ../qtquick3dphysics.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtgrpc"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtgrpc
 	url = ../qtgrpc.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtquickeffectmaker"]
 	depends = qtbase qtdeclarative qtshadertools
 	recommends = qtquick3d
 	path = qtquickeffectmaker
 	url = ../qtquickeffectmaker.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qtgraphs"]
 	depends = qtbase qtdeclarative qtquick3d
 	path = qtgraphs
 	url = ../qtgraphs.git
-	branch = 6.11.0
+	branch = dev
 	status = addon
 [submodule "qttasktree"]
 	depends = qtbase
 	path = qttasktree
 	url = ../qttasktree.git
-	branch = 6.11.0
+	branch = dev
 	status = preview
 [submodule "qtopenapi"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtopenapi
 	url = ../qtopenapi.git
-	branch = 6.11.0
+	branch = dev
 	status = preview
 [submodule "qtcanvaspainter"]
 	depends = qtbase qtdeclarative qtshadertools
 	path = qtcanvaspainter
 	url = ../qtcanvaspainter.git
-	branch = 6.11.0
+	branch = dev
 	status = preview

cmake/QtIRCommandLineHelpers.cmake

@@ -178,6 +178,7 @@ function(qt_ir_command_line_set_input name val)
 endfunction()
 
 # Appends a value of a command line option into a global property.
+# Currently unused
 function(qt_ir_command_line_append_input name val)
     if(NOT "${commandline_option_${name}_alias}" STREQUAL "")
         set(name "${commandline_option_${name}_alias}")
@@ -239,22 +240,6 @@ function(qt_ir_commandline_string arg val nextok)
     endif()
 endfunction()
 
-# Like string, but appends to the existing value instead of overwriting.
-# Allows repeated flags like: -skip qtwebengine -skip qtwebview
-function(qt_ir_commandline_addString arg val nextok)
-    if(nextok)
-        qt_ir_args_get_next_command_line_arg(val)
-
-        if("${val}" MATCHES "^-")
-            qt_ir_add_error("No value supplied to command line options '${arg}'.")
-        endif()
-    endif()
-    qt_ir_validate_value("${arg}" "${val}" success)
-    if(success)
-        qt_ir_command_line_append_input("${arg}" "${val}")
-    endif()
-endfunction()
-
 # Sets / handles the value of a command line void option.
 # This is an option like --force, which doesn't take any arguments.
 # Currently unused
@@ -294,7 +279,6 @@ endfunction()
 #
 # Currently handles the following types of CLI arguments:
 #  string
-#  addString (like string, but accumulates values from repeated flags)
 #  boolean
 #  void
 #

cmake/QtIRGitHelpers.cmake

@@ -102,18 +102,27 @@ endfunction()
 # - ../qt/qttools-litehtml.git
 function(qt_ir_add_git_remotes repo_relative_url working_directory)
     set(gerrit_ssh_base "ssh://@USER@codereview.qt-project.org@PORT@/")
-    set(gerrit_repo_url "${gerrit_ssh_base}")
+    set(gerrit_https_base "https://@USER@codereview.qt-project.org@AUTH@/")
 
     qt_ir_get_option_value(codereview-username username)
+    qt_ir_get_option_value(codereview-https https)
+
+    if(https)
+        set(gerrit_repo_url "${gerrit_https_base}")
+    else()
+        set(gerrit_repo_url "${gerrit_ssh_base}")
+    endif()
 
     # If given a username, make a "verbose" remote.
     # Otherwise, rely on proper SSH configuration.
     if(username)
         string(REPLACE "@USER@" "${username}@" gerrit_repo_url "${gerrit_repo_url}")
         string(REPLACE "@PORT@" ":29418" gerrit_repo_url "${gerrit_repo_url}")
+        string(REPLACE "@AUTH@" "/a" gerrit_repo_url "${gerrit_repo_url}")
     else()
         string(REPLACE "@USER@" "" gerrit_repo_url "${gerrit_repo_url}")
         string(REPLACE "@PORT@" "" gerrit_repo_url "${gerrit_repo_url}")
+        string(REPLACE "@AUTH@" ""   gerrit_repo_url "${gerrit_repo_url}")
     endif()
 
     set(namespace "qt")

cmake/QtIRHelp.txt

@@ -98,6 +98,9 @@ Options:
         username and port number, and thus relies on a correct SSH
         configuration.
 
+    --codereview-https
+        Specify this option to use HTTPs instead of SSH.
+
     --alternates <path to other Qt5 repo>
         Adds alternates for each submodule to another full qt5 checkout.
         This makes this qt5 checkout very small, as it will use the object

cmake/QtIRHelpers.cmake

@@ -89,26 +89,6 @@ function(qt_ir_handle_called_from_configure top_level_src_path out_var_exit_reas
 
     qt_ir_validate_options_for_configure()
 
-    # Convert -skip values to module-subset exclusions so init-repository respects them.
-    qt_ir_get_option_value(skip skip_modules)
-    if(skip_modules)
-        string(REPLACE "," ";" skip_modules "${skip_modules}")
-        list(TRANSFORM skip_modules STRIP)
-        list(TRANSFORM skip_modules PREPEND "-")
-
-        qt_ir_get_option_value(module-subset existing_subset)
-        if(NOT existing_subset)
-            set(existing_subset "default")
-        endif()
-
-        list(APPEND skip_modules "${existing_subset}")
-        list(REMOVE_DUPLICATES skip_modules)
-        list(JOIN skip_modules "," merged_subset)
-
-        qt_ir_set_option_value(module-subset "${merged_subset}")
-        message(DEBUG "Preprocessed -skip option: module-subset is now: ${merged_subset}")
-    endif()
-
     # -init_submodules implies --force
     qt_ir_set_option_value(force TRUE)
 

cmake/QtIROptionsHelpers.cmake

@@ -14,6 +14,7 @@ macro(qt_ir_set_known_command_line_options)
     qt_ir_commandline_option(berlin TYPE boolean)
     qt_ir_commandline_option(branch TYPE boolean)
     qt_ir_commandline_option(codereview-username TYPE string)
+    qt_ir_commandline_option(codereview-https TYPE boolean)
     qt_ir_commandline_option(copy-objects TYPE boolean)
     qt_ir_commandline_option(fetch TYPE boolean DEFAULT_VALUE yes)
     qt_ir_commandline_option(force SHORT_NAME f TYPE boolean)
@@ -37,7 +38,6 @@ macro(qt_ir_set_known_command_line_options)
     qt_ir_commandline_option(init-submodules TYPE boolean)
     # We alias qtbase's submodules option to init-repository module-subset.
     qt_ir_commandline_option(submodules ALIAS module-subset TYPE string)
-    qt_ir_commandline_option(skip TYPE addString)
 
     set_property(GLOBAL PROPERTY _qt_ir_known_command_line_options "${commandline_known_options}")
 endmacro()

coin/platform_configs/cmake_platforms.yaml

@@ -120,15 +120,15 @@ Configurations:
 # Test on Ubuntu 24.04 x64 X11
 -
     Id: 'ubuntu-24.04-x64-developer-build-x11-tests'
-    Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+    Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
     Compiler: 'GCC'
-    Features: ['Sccache', 'TestOnly']
+    Features: ['Sccache', 'TestOnly', 'InsignificantTests']
     Platform dependency: 'ubuntu-24.04-x64-developer-build'
 -
     Id: 'ubuntu-24.04-x64-x11-tests'
-    Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+    Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
     Compiler: 'GCC'
-    Features: ['Sccache', 'TestOnly']
+    Features: ['Sccache', 'TestOnly', 'InsignificantTests']
     Platform dependency: 'ubuntu-24.04-x64'
 -
     Id: 'opensuse-15.6-developer-build'
@@ -182,6 +182,7 @@ Configurations:
         'VCPKG_TARGET_TRIPLET=x64-windows-qt',
         'Protobuf_ROOT={{.Env.Protobuf_ROOT_msvc}}',
         'WEBVIEW2_SDK_ROOT={{.Env.WEBVIEW2_SDK_ROOT_PATH}}',
+        'ZLIB_ROOT={{.Env.ZLIB_PATH_AMD64}}',
     ]
 -
     Id: 'windows-11_24H2-msvc2022'
@@ -197,6 +198,7 @@ Configurations:
         'VCPKG_TARGET_TRIPLET=x64-windows-qt',
         'Protobuf_ROOT={{.Env.Protobuf_ROOT_msvc}}',
         'WEBVIEW2_SDK_ROOT={{.Env.WEBVIEW2_SDK_ROOT_PATH}}',
+        'ZLIB_ROOT={{.Env.ZLIB_PATH_AMD64}}',
     ]
 -
     Id: 'windows-11_23h2-arm64-msvc2022'
@@ -211,6 +213,7 @@ Configurations:
         'VCPKG_TARGET_TRIPLET=arm64-windows-qt',
         'Protobuf_ROOT={{.Env.Protobuf_ROOT_msvc}}',
         'WEBVIEW2_SDK_ROOT={{.Env.WEBVIEW2_SDK_ROOT_PATH}}',
+        'ZLIB_ROOT={{.Env.ZLIB_PATH_ARM64}}',
     ]
 -
     Id: 'windows-11_24H2-msvc2022-arm64'
@@ -253,6 +256,7 @@ Configurations:
         'VCPKG_HOST_TRIPLET=x64-windows-qt',
         'VCPKG_TARGET_TRIPLET=x64-windows-qt',
         'gRPC_ROOT={{.Env.gRPC_ROOT_msvc}}',
+        'ZLIB_ROOT={{.Env.ZLIB_PATH_AMD64}}',
     ]
 -
     Id: 'rhel-9.6'
@@ -266,18 +270,6 @@ Configurations:
         'VCPKG_HOST_TRIPLET=x64-linux-qt',
         'VCPKG_TARGET_TRIPLET=x64-linux-qt',
     ]
--
-    Id: 'rhel-10.0'
-    Template: 'qtci-linux-RHEL-10.0-x86_64-51'
-    Compiler: 'GCC'
-    Features: ['Sccache', 'UseConfigure', 'InstallQt5Dependencies', 'GenerateSBOM', 'VerifySBOM', 'InsignificantTests', 'DoNotAbortTestingOnFirstFailure']
-    Configure arguments: '-nomake examples -release -force-debug-info -headersclean -separate-debug-info -qt-libjpeg -qt-libpng -qt-pcre -qt-harfbuzz -qt-doubleconversion -no-libudev -bundled-xcb-xinput'
-    Environment variables: [
-        'CMAKE_ARGS=-DOpenGL_GL_PREFERENCE=LEGACY',
-        'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR}} -DQT_DEPLOY_FFMPEG=TRUE -DINPUT_headersclean=ON',
-        'VCPKG_HOST_TRIPLET=x64-linux-qt',
-        'VCPKG_TARGET_TRIPLET=x64-linux-qt',
-    ]
 -
     Id: 'ios-universal'
     Template: 'qtci-macos-14-arm-106'

coin/platform_configs/macos.yaml

@@ -12,7 +12,7 @@ Configurations:
         Template: 'qtci-macos-15-arm-104'
         Compiler: 'Clang'
         Target arch: 'x86_64-arm64'
-        Features: ['Sccache', 'Packaging', 'DoNotRunTests', 'WarningsAreErrors', 'UseConfigure', 'GenerateSBOM', 'VerifySBOM']
+        Features: ['Packaging', 'DoNotRunTests', 'WarningsAreErrors', 'UseConfigure', 'GenerateSBOM', 'VerifySBOM']
         Configure arguments: '-nomake examples -release -force-debug-info -separate-debug-info -headersclean -framework'
         Environment variables: [
             'CMAKE_ARGS=-DCMAKE_OSX_ARCHITECTURES="x86_64;arm64" -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_DIR}}',
@@ -41,6 +41,13 @@ Configurations:
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly', 'Packaging']
         Platform dependency: 'macos-universal-on-arm64'
+    -
+        Id: 'macos-26-x86_64-tests'
+        Template: 'qtci-macos-26-x86_64-100'
+        Compiler: 'Clang'
+        Features: ['Sccache', 'TestOnly', 'Packaging', 'DoNotAbortTestingOnFirstFailure']
+        Platform dependency: 'macos-universal-on-arm64'
+        Environment variables: [ 'COIN_CTEST_IGNORE_EXIT_CODE=1' ]
 
     # And arm64
 
@@ -85,6 +92,16 @@ Configurations:
             'CMAKE_ARGS=-DOPENSSL_ROOT_DIR={{.Env.OPENSSL_DIR}}',
             'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR}} -DQT_DEPLOY_FFMPEG=TRUE',
         ]
+    -
+        Id: 'macos-26-x86_64-developer-build'
+        Template: 'qtci-macos-26-x86_64-100'
+        Compiler: 'Clang'
+        Features: ['Sccache', 'DoNotRunTests', 'WarningsAreErrors', 'UseConfigure', 'StandaloneExamples']
+        Configure arguments: '-developer-build -release -force-asserts -force-debug-info -no-pch -no-framework -qtnamespace TestNamespace -make examples'
+        Environment variables: [
+            'CMAKE_ARGS=-DOPENSSL_ROOT_DIR={{.Env.OPENSSL_DIR}}',
+            'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR}} -DQT_DEPLOY_FFMPEG=TRUE',
+        ]
     -
         Id: 'macos-arm64-developer-build'
         Template: 'qtci-macos-15-arm-104'

coin/platform_configs/nightly_examples_and_tests.yaml

@@ -2,7 +2,7 @@ Version: 2
 Configurations:
 -
     Id: 'ubuntu-24.04-x64-examples-and-tests-build'
-    Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+    Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['Sccache', 'UseConfigure', 'DoNotRunTests', 'NoSubmoduleDependencies']
     Configure arguments: '-make examples -make tests'

coin/platform_configs/nightly_top_level_run_cmake_tests.yaml

@@ -2,7 +2,7 @@ Version: 2
 Configurations:
 -
     Id: 'ubuntu-24.04-x64-run-cmake-tests'
-    Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+    Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['Sccache', 'NoSubmoduleDependencies', 'TopLevelRunCMakeTests', 'DisableTests', 'VMSize16']
     Configure arguments: ''

coin/platform_configs/qtbase.yaml

@@ -15,3 +15,8 @@ Include: [
     quick-bridges.yaml
 ]
 Configurations: []
+Overrides:
+# Make VxWorks tests insignificant.
+-
+    Id: 'vxworks-x86_64-tests'
+    Features: ['VMSize8', 'UseConfigure', 'BuildTestsInTest', 'TestOnly', 'InsignificantTests']

coin/platform_configs/qtlite.yaml

@@ -2,7 +2,7 @@ Version: 2
 Configurations:
 -
     Id: 'ubuntu-24.04-x86-static-qtlite'
-    Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+    Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['Sccache', 'UseConfigure', 'DoNotRunTests', 'MinimalStaticTests']
     Configure arguments: >
@@ -224,7 +224,7 @@ Configurations:
     ]
 -
     Id: 'ubuntu-24.04-x86-static-qtlite-tests'
-    Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+    Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['Sccache', 'TestOnly','InsignificantTests']
     Platform dependency: 'ubuntu-24.04-x86-static-qtlite'

coin/platform_configs/quick-bridges.yaml

@@ -24,7 +24,7 @@ Configurations:
     Environment variables: []
 -
     Id: 'linux-quick-bridges'
-    Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+    Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['Packaging', 'Sccache', 'UseConfigure', 'DisableTests', 'Insignificant']
     Configure arguments: >

coin/platform_configs/quick-minimal.yaml

@@ -151,7 +151,7 @@ Configurations:
     Platform dependency: 'macos-quick-minimal'
 -
     Id: 'linux-quick-minimal'
-    Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+    Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['Sccache', 'UseConfigure', 'DisableTests', 'Insignificant']
     Configure arguments: >

coin/platform_configs/yocto.yaml

@@ -2,67 +2,67 @@ Version: 2
 Module only: True
 Configurations:
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Packaging']
         Target arch: 'TARGET1'
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Packaging']
         Target arch: 'TARGET2'
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Packaging']
         Target arch: 'TARGET3'
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Packaging']
         Target arch: 'TARGET4'
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Packaging']
         Target arch: 'TARGET5'
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Packaging']
         Target arch: 'TARGET6'
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Packaging']
         Target arch: 'TARGET7'
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Packaging']
         Target arch: 'TARGET8'
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Packaging']
         Target arch: 'TARGET9'
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Packaging']
         Target arch: 'TARGET10'
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Insignificant']
         Target arch: 'INSIGNIFICANT_TARGET1'
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Insignificant']
         Target arch: 'INSIGNIFICANT_TARGET2'
     -
-        Template: 'qtci-linux-Ubuntu-24.04-x86_64-54'
+        Template: 'qtci-linux-Ubuntu-24.04-x86_64-51'
         Compiler: 'Yocto'
         Features: ['Insignificant']
         Target arch: 'INSIGNIFICANT_TARGET3'

coin/pre-provisioning/qtci-linux-RHEL-10.0-x86_64/01-disable-automounting.sh

@@ -1,13 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-sudo tee -a /etc/dconf/db/local.d/00-media-automount <<"EOF"
-[org/gnome/desktop/media-handling]
-automount=false
-automount-open=false
-EOF
-
-sudo dconf update

coin/pre-provisioning/qtci-linux-RHEL-10.0-x86_64/README_MANUAL_INSTALLATIONS

@@ -1,88 +0,0 @@
-### RHEL 10.0 ###
-Hard Disk: 500G
-Network: CI
-Video Card: Total Video Memory: 64MB
-Boot options/Firmware: BIOS
-Language: English (United States)
-Keyboard: English (US), Norwegian (Windows), Finnish (Windows)
-Time & Date: Etc/Coordinated Universal Time
-Software Selection: Server with GUI
-Installation Destination: Automatic partitioning selected
-Root Passowrd: Set
-Network & Host..: Connected
-KDUMP enabled: Memory Reservation: automatic
-Begin Installation
-Reboot
-# Configure Settings
- Notifications:
-    * Lock Screen Notifications: OFF
-    * Applications: Set notification off
-    * Do Not Disturb: on
- Applications:
-    * Disable notifications from all applications
- Privacy:
-    * Blank Screen Delay: Never
-    * Screen Lock: OFF
- Power:
-    * Blank screen: Never
- Displays:
-    * Resolution: 1280 x 800
- Users:
-    * Automatic login on
-# Add user to sudoers
-Add 'qt ALL=NOPASSWD: ALL' to /etc/sudoers.d/qt
-Add 'GRUB_GFXMODE=1280x800' to /etc/default/grub
-sudo grub2-mkconfig -o /etc/grub2.cfg
-sudo grub2-mkconfig -o /boot/grub2/grub.cfg
-# Add support for virtio driver
-su
-echo "add_drivers+=\" virtio-blk \"" >> /etc/dracut.conf.d/virtio.conf
-dracut -f
-
-# NOTE!
-#  - RHEL uses 'sudo subscription-manager release --set=10.0' in provisioning
-#  - Do not update Tier 1 via GUI without using this same --set before provisioning
-#  - To avoid System to have newer packages than RPMS which will cause update issues
-
-# Register RHEL before it's possible to install qemu-guest-agent
-subscription-manager register
-
-yum -y install qemu-guest-agent
-
-# Do these from Opennebula UI!
-
-# Enable network connection from right upper corner
-This is done when the VM is launched as persistent in OpenNebula.
-# Fetch and run coin-setup
-Download http://coin/coin/binary/linux_amd64/coin-setup
-# run as qt user
-run './coin-setup'
-# Switch to use GNOME Classic user interface
-# GNOME Classic was selected because there's an issue with Standard (wayland display server).
-# Autotest start failing because terminal session remains in Activities Overview.
-# https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3854
-First execute script ./01-disable-automounting.sh (dconf update crash in GNOME Classic)
-logout -> Select user (without it the drop down menu won't appear) -> switch to 'GNOME Classic' -desktop session from drop down menu in login screen
-
-# If gear icon is not seen, check is 'GNOME Classic' -desktop session installed, and install if it's missing
-ls /usr/share/xsessions/
-# This should list something like these if it's installed
-gnome-classic.desktop
-gnome.desktop
-
-# To install GNOME Classic if it's missing
-sudo dnf reinstall gnome-classic-session
-
-# In RHEL 10.0 even with 'GNOME Classic' -desktop the Activities Overview is still in use
-# It can be bypassed via 'No Overview' -GNOME extension:
-#  - https://extensions.gnome.org/extension/4099/no-overview/
-#  - Select GNOME Shell version 47 to download
-#  - Unpack extension from tar.gz
-sudo mv <extension_folder> /usr/share/gnome-shell/extensions/no-overview@fthx
-sudo chown -R root: /usr/share/gnome-shell/extensions/no-overview@fthx
-sudo chmod 755 -R /usr/share/gnome-shell/extensions/no-overview@fthx
-sudo reboot
-gnome-extensions list
-gnome-extensions enable no-overview@fthx
-
-Reboot

coin/pre-provisioning/qtci-linux-Ubuntu-24.04-x86_64/README_MANUAL_INSTALLATIONS

@@ -53,17 +53,6 @@ run 'sudo ufw disable'
 
 run 'sudo apt install qemu-guest-agent'
 
-# Install no-overview gnome extension to prevent desktop overview at boot (QTBUG-132070)
-#  - https://extensions.gnome.org/extension/4099/no-overview/
-#  - Select GNOME Shell version 46 to download
-#  - Unpack extension to (mkdir): /usr/share/gnome-shell/extensions/no-overview@fthx
-sudo chown -R root /usr/share/gnome-shell/extensions/no-overview@fthx
-sudo chmod 755 -R /usr/share/gnome-shell/extensions/no-overview@fthx
-sudo reboot
-gnome-extensions list
-gnome-extensions enable no-overview@fthx
-gnome-extensions info no-overview@fthx  # Check for "Active"
-
 # Fetch and run coin-setup (in Opennebula)
 Download http://coin/coin/binary/linux_amd64/coin-setup
 run 'chmod +x ./coin-setup' to make it executable

coin/provisioning/common/linux/android/gradle_project/.gitignore

@@ -1,7 +1,12 @@
 *.iml
 .gradle
-.idea
 /local.properties
+/.idea/caches
+/.idea/libraries
+/.idea/modules.xml
+/.idea/workspace.xml
+/.idea/navEditor.xml
+/.idea/assetWizardSettings.xml
 .DS_Store
 /build
 /captures

coin/provisioning/common/linux/android/gradle_project/app/build.gradle

@@ -15,8 +15,8 @@ android {
     }
 
     compileOptions {
-        sourceCompatibility JavaVersion.VERSION_17
-        targetCompatibility JavaVersion.VERSION_17
+        sourceCompatibility JavaVersion.VERSION_1_8
+        targetCompatibility JavaVersion.VERSION_1_8
     }
 }
 

coin/provisioning/common/linux/android/gradle_project/app/src/main/AndroidManifest.xml

@@ -6,7 +6,7 @@
         android:allowBackup="true"
         android:label="gradle_project"
         android:supportsRtl="true"
-        tools:targetApi="36">
+        tools:targetApi="35">
         <activity
             android:name=".MainActivity"
             android:exported="true">

coin/provisioning/common/linux/android/gradle_project/gradle/libs.versions.toml

@@ -1,8 +1,8 @@
 [versions]
-agp = "9.0.0"
-core = "1.17.0"
+agp = "8.10.1"
+core = "1.16.0"
 appcompat = "1.7.1"
-material = "1.13.0"
+material = "1.12.0"
 constraintlayout = "2.2.1"
 
 [libraries]

coin/provisioning/common/linux/android_linux.sh

@@ -232,16 +232,12 @@ cp "${scripts_dir_name}/../unix/${emulator_script_filename}" "${HOME}"
 ANDROID_EMULATOR_RUNNER="${HOME}/${emulator_script_filename}"
 SetEnvVar "ANDROID_EMULATOR_RUNNER" "$ANDROID_EMULATOR_RUNNER"
 
-SetEnvVar "PATH" "\$PATH:$sdkTargetFolder/emulator"
-SetEnvVar "PATH" "\$PATH:$sdkTargetFolder/platform-tools"
-SetEnvVar "PATH" "\$PATH:$sdkTargetFolder/cmdline-tools/latest/bin"
-
 # Gradle Caching
 cp -r "${scripts_dir_name}/android/gradle_project" /tmp/gradle_project
 cd /tmp/gradle_project
 # Get Gradle files from qtbase
 qtbaseGradleUrl="https://code.qt.io/cgit/qt/qtbase.git/plain/src/3rdparty/gradle"
-commit_sha="269a75dbd1262a714eb238c42e5159a0a8979818"
+commit_sha="bb12c984b2c838bdb06169ef7d659384c02c8b82"
 curl "$qtbaseGradleUrl/gradle.properties?h=$commit_sha" > gradle.properties
 curl "$qtbaseGradleUrl/gradlew?h=$commit_sha" > gradlew
 curl "$qtbaseGradleUrl/gradlew.bat?h=$commit_sha" > gradlew.bat

coin/provisioning/common/linux/axivion/ci_config_common.json

@@ -12,7 +12,7 @@
             },
             "directory": "../work/qt/$(env:TESTED_MODULE_COIN)",
             "ir": "$(env:IRNAME)",
-            "name": "qt_$(env:PACKAGE)_$(env:MODULE)_$(env:TESTED_MODULE_BRANCH_COIN)_$(env:TARGET_OS_COIN)"
+            "name": "qt_$(env:PACKAGE)_$(env:MODULE)_(env:TESTED_MODULE_BRANCH_COIN)_$(env:TARGET_OS_COIN)"
         },
         "VCSIntegration": {
             "vcs_mapping": {

coin/provisioning/common/linux/axivion/rule_config.json

@@ -51,13 +51,13 @@
             "_active": true
         },
         "Qt-CtorMissingParentArgument": {
-            "_active": true
+            "_active": false
         },
         "Qt-DetachingTemporary": {
             "_active": true
         },
         "Qt-FullyQualifiedMocTypes": {
-            "_active": true
+            "_active": false
         },
         "Qt-FunctionArgsByValueRef": {
             "_active": false
@@ -69,13 +69,13 @@
             "_active": true
         },
         "Qt-Generic-InitializeAllFieldsInConstructor": {
-            "_active": true
+            "_active": false
         },
         "Qt-Generic-MissingBaseCopy": {
-            "_active": true
+            "_active": false
         },
         "Qt-Generic-MissingIncludeGuard": {
-            "_active": true
+            "_active": false
         },
         "Qt-Generic-MissingTrCall": {
             "_active": true
@@ -84,7 +84,7 @@
             "_active": true
         },
         "Qt-Generic-NoFunctionDefinitionInHeader": {
-            "_active": true
+            "_active": false
         },
         "Qt-Generic-NoIrregularInclude": {
             "_active": true
@@ -114,7 +114,7 @@
             "_active": true
         },
         "Qt-IncorrectEmit": {
-            "_active": true
+            "_active": false
         },
         "Qt-InstallEventFilter": {
             "_active": true
@@ -129,16 +129,16 @@
             "_active": true
         },
         "Qt-MissingQObjectMacro": {
-            "_active": true
+            "_active": false
         },
         "Qt-MutableContainerKey": {
             "_active": true
         },
         "Qt-NonPodGlobalStatic": {
-            "_active": true
+            "_active": false
         },
         "Qt-OldStyleConnect": {
-            "_active": true
+            "_active": false
         },
         "Qt-OverloadedSignal": {
             "_active": true
@@ -162,7 +162,7 @@
             "_active": true
         },
         "Qt-QPropertyWithoutNotify": {
-            "_active": true
+            "_active": false
         },
         "Qt-QStringArg": {
             "_active": true
@@ -186,7 +186,7 @@
             "_active": true
         },
         "Qt-RuleOfThree": {
-            "_active": true
+            "_active": false
         },
         "Qt-RuleOfTwoSoft": {
             "_active": true

coin/provisioning/common/linux/install-ninja.sh

@@ -15,20 +15,18 @@ case "$uname_m" in
     x86_64|amd64)
         sha256="6f98805688d19672bd699fbbfa2c2cf0fc054ac3df1f0e6a47664d963d530255"
         pkgname="ninja-$version-linux-x64.zip"
-        pkgnameExt="ninja-linux.zip"
         dirname="ninja-$version-linux-x64"
         ;;
     arm64|aarch64)
         sha256="5c25c6570b0155e95fce5918cb95f1ad9870df5768653afe128db822301a05a1"
         pkgname="ninja-$version-linux-arm64.zip"
-        pkgnameExt="ninja-linux-aarch64.zip"
         dirname="ninja-$version-linux-arm64"
         ;;
     *) fatal "Unknown architecture in uname: $uname_m" 43 ;;
 esac
 
 internalUrl="http://ci-files01-hki.ci.qt.io/input/ninja/$pkgname"
-externalUrl="https://github.com/ninja-build/ninja/releases/download/v$version/$pkgnameExt"
+externalUrl="https://github.com/ninja-build/ninja/releases/download/v$version/$pkgname"
 
 targetFile="$HOME/$pkgname"
 DownloadURL "$internalUrl" "$externalUrl" "$sha256" "$targetFile"

coin/provisioning/common/macos/android.sh

@@ -25,8 +25,8 @@ basePath="http://ci-files01-hki.ci.qt.io/input/android"
 toolsVersion="19.0"
 toolsFile="commandlinetools-mac-13114758_latest.zip"
 toolsBackupUrl="https://dl.google.com/android/repository/$toolsFile"
-sdkBuildToolsVersion="36.0.0"
-sdkApiLevel="android-36"
+sdkBuildToolsVersion="35.0.1"
+sdkApiLevel="android-35"
 toolsSha1="c3e06a1959762e89167d1cbaa988605f6f7c1d24"
 
 ndkVersionLatest="r27c"
@@ -41,9 +41,11 @@ ndkSha1Preview="09be4f8fb626a9c93415198ea8e75d8d82f528fa"
 
 ndkVersionNightly1=$ndkVersionLatest  # Set as same version as latest = skip NDK install in provisioning
 ndkSha1Nightly1=$ndkSha1Latest
-
 ndkVersionNightly2=$ndkVersionLatest
 ndkSha1Nightly2=$ndkSha1Latest
+sdkBuildToolsVersion="36.0.0"
+# this is compile sdk version
+sdkApiLevel="android-36"
 
 toolsTargetFile="/tmp/$toolsFile"
 toolsSourceFile="$basePath/$toolsFile"

coin/provisioning/common/macos/install-ffmpeg-ios.sh

@@ -1,299 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2024 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-# This script will build and install FFmpeg shared libraries.
-#
-# The script will package iOS and iOS-simulator binaries into one
-# single .xcframework. This .xcframework cannot contain .dylibs
-# directly. It must contain .framework files. Unlike macOS, binaries
-# should NOT be lipoed together.
-#
-# From https://developer.apple.com/documentation/xcode/creating-a-multi-platform-binary-framework-bundle
-# "Avoid using dynamic library files (.dylib files) for dynamic
-# linking. An XCFramework can include dynamic library files, but only
-# macOS supports these libraries for dynamic linking. Dynamic linking
-# on iOS, iPadOS, tvOS, visionOS, and watchOS requires the XCFramework
-# to contain .framework bundles."
-#
-# This script can take an optional final parameter to control
-# installation directory.
-set -eoux pipefail
-
-# Must match or be lower than the minimum iOS version supported by the version of Qt that is
-# is currently being built.
-readonly MINIMUM_IOS_VERSION="16.0"
-
-source "${BASH_SOURCE%/*}/../unix/ffmpeg-installation-utils.sh"
-
-ffmpeg_version=$(ffmpeg_version_default)
-ffmpeg_source_dir=$(download_ffmpeg)
-ffmpeg_config_options=$(get_ffmpeg_config_options "shared")
-default_prefix="/usr/local/ios/ffmpeg"
-prefix="${1:-$default_prefix}"
-
-# Qt doesn't utilize all FFmpeg components. This is a list of the ones
-# we care about
-ffmpeg_components="libavcodec libavformat libavutil libswresample libswscale"
-
-target_platform_to_sdk() {
-    local target_platform="$1"
-    if [[ "$target_platform" == "arm64-simulator" ]] \
-        || [[ "$target_platform" == "x86_64-simulator" ]]; then
-        echo "iphonesimulator"
-    elif [ "$target_platform" == "arm64-iphoneos" ]; then
-        echo "iphoneos"
-    else
-        echo "Error finding corresponding iOS SDK for target platform: ${target_platform}"
-        exit 1
-    fi
-}
-
-build_ffmpeg_ios() {
-    local target_platform="$1"
-    local target_cpu_arch=""
-    local target_sdk;
-    target_sdk="$(target_platform_to_sdk "${target_platform}")"
-
-    if [ "$target_platform" == "arm64-simulator" ]; then
-        target_cpu_arch="arm64"
-        minos="-mios-simulator-version-min=$MINIMUM_IOS_VERSION"
-    elif [ "$target_platform" == "x86_64-simulator" ]; then
-        target_cpu_arch="x86_64"
-        minos="-mios-simulator-version-min=$MINIMUM_IOS_VERSION"
-    elif [ "$target_platform" == "arm64-iphoneos" ]; then
-        target_cpu_arch="arm64"
-        minos="-miphoneos-version-min=$MINIMUM_IOS_VERSION"
-    else
-        echo "Error when building FFmpeg for iOS. Unknown parameter given for target_platform: '${target_platform}'"
-        exit 1
-    fi
-
-    local build_dir="$ffmpeg_source_dir/build_ios/$target_platform"
-    sudo mkdir -p "$build_dir"
-    pushd "$build_dir"
-
-    local sysroot;
-    sysroot="$(xcrun --sdk "${target_sdk}" --show-sdk-path)"
-    local cc;
-    cc="$(xcrun -f --sdk ${target_sdk} clang)"
-    local cxx;
-    cxx="$(xcrun -f --sdk ${target_sdk} clang++)"
-
-    # We add -g so we get debug symbols.
-    local common_arch_flags="${minos} -arch ${target_cpu_arch} -g"
-
-    local config_parameters=(
-        $ffmpeg_config_options
-        --sysroot="${sysroot}"
-        --enable-cross-compile
-        --enable-optimizations
-        --prefix="$prefix"
-        --arch="$target_cpu_arch"
-        --cc="$cc"
-        --cxx="$cxx"
-        --extra-cflags="${common_arch_flags}"
-        --extra-cxxflags="${common_arch_flags}"
-        --extra-ldflags="${common_arch_flags}"
-        --target-os=darwin
-        --enable-shared
-        --disable-static
-        --install-name-dir="@rpath"
-        --disable-audiotoolbox
-
-        # We perform manual stripping after generating dSYMs.
-        # Make sure to skip it during FFmpeg compilation.
-        --disable-stripping
-    )
-    sudo "$ffmpeg_source_dir/configure" "${config_parameters[@]}"
-
-    sudo make install DESTDIR="$build_dir/installed" -j4
-    popd
-}
-
-build_info_plist() {
-    local file_path="$1"
-    local framework_name="$2"
-    local framework_id="$3"
-
-    # Apple plist format has a strict requirement that the version string
-    # contains up to 3 numerics separated by a dot. Meanwhile, FFmpeg versioning
-    # tends to use an 'n' prefix in their versioning. We use a regex to convert
-    # and verify the version string.
-    #
-    # https://developer.apple.com/documentation/bundleresources/information-property-list/cfbundleversion
-    local formatted_ffmpeg_version
-    if [[ $ffmpeg_version =~ ([0-9]+(\.[0-9]+){0,2}) ]]; then
-        formatted_ffmpeg_version="${BASH_REMATCH[1]}"
-    else
-        echo "Unable to format FFmpeg version string '$ffmpeg_version' into corresponding Apple Info.plist format"
-        exit 1
-    fi
-
-    local minimum_version_key="MinimumOSVersion"
-    local supported_platforms="iPhoneOS"
-
-    info_plist="<?xml version=\"1.0\" encoding=\"UTF-8\"?>
-<!DOCTYPE plist PUBLIC \"-//Apple//DTD PLIST 1.0//EN\" \"http://www.apple.com/DTDs/PropertyList-1.0.dtd\">
-<plist version=\"1.0\">
-<dict>
-    <key>CFBundleDevelopmentRegion</key>
-    <string>en</string>
-    <key>CFBundleExecutable</key>
-    <string>${framework_name}</string>
-    <key>CFBundleIdentifier</key>
-    <string>${framework_id}</string>
-    <key>CFBundleInfoDictionaryVersion</key>
-    <string>6.0</string>
-    <key>CFBundleName</key>
-    <string>${framework_name}</string>
-    <key>CFBundlePackageType</key>
-    <string>FMWK</string>
-    <key>CFBundleShortVersionString</key>
-    <string>${formatted_ffmpeg_version}</string>
-    <key>CFBundleVersion</key>
-    <string>${formatted_ffmpeg_version}</string>
-    <key>CFBundleSignature</key>
-    <string>????</string>
-    <key>${minimum_version_key}</key>
-    <string>${MINIMUM_IOS_VERSION}</string>
-    <key>CFBundleSupportedPlatforms</key>
-    <array>
-        <string>${supported_platforms}</string>
-    </array>
-    <key>NSPrincipalClass</key>
-    <string></string>
-</dict>
-</plist>"
-    echo $info_plist | sudo tee ${file_path} 1>/dev/null
-}
-
-# Create a 'traditional' framework from the corresponding dylib.
-# This includes creating a folder for it, and inserting Info.plist
-# and dylib. We also patch runpaths in the dylib to match the
-# frameworks directory structure.
-#
-# There is no command-line tool for generating .framework
-# files. By inspecting .frameworks generated through Xcode, we
-# have found they are primarily a directory with a very specific
-# layout. The code below generates a matching layout.
-#
-# See https://developer.apple.com/library/archive/documentation/MacOSX/Conceptual/BPFrameworks/Frameworks.html
-create_framework() {
-    local ffmpeg_component_name="$1"
-    local platform="$2"
-
-    local ffmpeg_build_path="${ffmpeg_source_dir}/build_ios/${platform}/installed/${prefix}"
-    local ffmpeg_component_src_dylib="${ffmpeg_build_path}/lib/${ffmpeg_component_name}.dylib"
-    local ffmpeg_component_framework="${ffmpeg_build_path}/framework/${ffmpeg_component_name}.framework"
-    local ffmpeg_component_target_dylib="${ffmpeg_component_framework}/${ffmpeg_component_name}"
-
-    # Make directory for the .framework
-    sudo mkdir -p "${ffmpeg_component_framework}"
-
-    # Inser the Info.plist
-    build_info_plist \
-        "${ffmpeg_component_framework}/Info.plist" \
-        "${ffmpeg_component_name}" \
-        "io.qt.ffmpegkit.${ffmpeg_component_name}"
-
-    # Copy in the dylib
-    sudo cp \
-        "${ffmpeg_component_src_dylib}" \
-        "${ffmpeg_component_target_dylib}"
-
-    # By default, runpaths will look for FFmpeg dependencies in
-    # '@rpath/libavcodec.xx.yy.dylib'. We want this path to be in the form
-    # '@rpath/libavcodec.framework/libavcodec.dylib'.
-
-    # Set the dylibs self-identity
-    sudo install_name_tool \
-        -id "@rpath/${ffmpeg_component_name}.framework/${ffmpeg_component_name}" \
-        "${ffmpeg_component_target_dylib}"
-
-    # Update the runpaths for each FFmpeg dependency entry
-    otool -L "$ffmpeg_component_target_dylib" \
-        | tail -n +2 \
-        | awk '{print $1}' \
-        | while read -r dep; do
-            # Go through all dependency entries of this .dylib,
-            # see if they point to a FFmpeg component. If it does,
-            # modify the entry to match the final
-            # directory structure.
-            for ffdep in $ffmpeg_components; do
-                if [[ "$dep" == */${ffdep}.* ]]; then
-                    echo "Rewriting dependency: $dep -> @rpath/${ffdep}.framework/${ffdep}"
-                    sudo install_name_tool -change \
-                        "$dep" \
-                        "@rpath/${ffdep}.framework/${ffdep}" \
-                        "$ffmpeg_component_target_dylib"
-                fi
-            done
-        done
-}
-
-# dSYM symbols must be generated manually, these are required for
-# App Store deployment. We generate them from the .dylibs inside
-# our .frameworks. This has to be done after patching the runpaths.
-# At the end, we strip the dylib.
-create_dsym() {
-    local ffmpeg_component_name="$1"
-    local platform="$2"
-
-    local ffmpeg_build_path="${ffmpeg_source_dir}/build_ios/${platform}/installed/${prefix}"
-    local target_dylib="${ffmpeg_build_path}/framework/${ffmpeg_component_name}.framework/${ffmpeg_component_name}"
-
-    sudo dsymutil "${target_dylib}" \
-        -o "${ffmpeg_build_path}/framework/${ffmpeg_component_name}.framework.dSYM"
-
-    local target_sdk;
-    target_sdk=$(target_platform_to_sdk "${platform}")
-
-    local strip;
-    strip="$(xcrun -f --sdk ${target_sdk} strip)"
-    sudo ${strip} -x "${target_dylib}"
-}
-
-create_xcframework() {
-    # Create 'traditional' framework from the corresponding dylib,
-    # also creating
-    local framework_name="$1"
-    local target_platform_a="$2"
-    local target_platform_b="$3"
-
-    local platform_a_build="${ffmpeg_source_dir}/build_ios/${target_platform_a}/installed/${prefix}"
-    local fw_a="${platform_a_build}/framework/${framework_name}.framework"
-    local dsym_a="${fw_a}.dSYM"
-
-    local platform_b_build="${ffmpeg_source_dir}/build_ios/${target_platform_b}/installed/${prefix}"
-    local fw_b="${platform_b_build}/framework/${framework_name}.framework"
-    local dsym_b="${fw_b}.dSYM"
-
-    sudo mkdir -p "$prefix/lib/"
-    sudo xcodebuild -create-xcframework \
-        -framework "$fw_a" -debug-symbols "$dsym_a" \
-        -framework $fw_b -debug-symbols "$dsym_b" \
-        -output "${prefix}/lib/${framework_name}.xcframework"
-}
-
-build_ffmpeg_ios "arm64-iphoneos"
-build_ffmpeg_ios "x86_64-simulator"
-
-for name in $ffmpeg_components; do
-    create_framework "$name" "arm64-iphoneos"
-    create_framework "$name" "x86_64-simulator"
-
-    create_dsym "$name" "arm64-iphoneos"
-    create_dsym "$name" "x86_64-simulator"
-done
-
-# Create corresponding xcframeworks containing both arm64 and x86_64-simulator frameworks:
-for name in $ffmpeg_components; do
-    create_xcframework "$name" "arm64-iphoneos" "x86_64-simulator"
-done
-
-# xcframeworks are already installed directly into the target output directory.
-# We need to install headers
-sudo cp -r "${ffmpeg_source_dir}/build_ios/arm64-iphoneos/installed/${prefix}/include" "$prefix"
-
-set_ffmpeg_dir_env_var "FFMPEG_DIR_IOS" "$prefix"

coin/provisioning/common/macos/java.sh

@@ -9,12 +9,12 @@ set -ex
 source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
 
 echo "Installing Java Development Kit"
-version=21.0.9
+version=17.0.12
 targetFile=jdk-${version}_macos-x64_bin.dmg
-expectedHash="3df8761bfba8d6a4633ecc92f1eff0a58d79c304"
+expectedHash="6fba2fbe5d181bd2ef7fd79e0335278c13f611cb"
 
 url=ci-files01-hki.ci.qt.io:/hdd/www/input/mac
-# url_alt=https://download.oracle.com/java/21/archive/jdk-21.0.8_macos-x64_bin.dmg
+# url_alt=https://www.oracle.com/java/technologies/downloads/#jdk17-mac
 
 echo "Mounting $targetFile"
 sudo mkdir -p /Volumes/files

coin/provisioning/common/macos/java_arm.sh

@@ -8,10 +8,10 @@ set -ex
 
 echo "Installing Java Development Kit"
 
-targetFile=zulu21.46.19-ca-jdk21.0.9-macosx_aarch64.dmg
+targetFile=zulu17.54.21-ca-jdk17.0.13-macosx_aarch64.dmg
 
 url=ci-files01-hki.ci.qt.io:/hdd/www/input/mac
-# url_alt=https://cdn.azul.com/zulu/bin/zulu21.46.19-ca-jdk21.0.9-macosx_aarch64.dmg
+# url_alt=https://cdn.azul.com/zulu/bin/zulu17.54.21-ca-jdk17.0.13-macosx_aarch64.dmg
 
 echo "Mounting $targetFile"
 sudo mkdir -p /Volumes/files
@@ -22,12 +22,12 @@ sudo umount /Volumes/files
 sudo hdiutil attach "/tmp/$targetFile"
 
 echo Installing JDK
-cd /Volumes/Azul\ Zulu\ JDK\ 21.46+19 && sudo installer -pkg Double-Click\ to\ Install\ Azul\ Zulu\ JDK\ 21.pkg -target /
+cd /Volumes/Azul\ Zulu\ JDK\ 17.54+21 && sudo installer -pkg Double-Click\ to\ Install\ Azul\ Zulu\ JDK\ 17.pkg -target /
 
 echo "Unmounting $targetFile"
-sudo hdiutil unmount /Volumes/Azul\ Zulu\ JDK\ 21.46+19 -force
+sudo hdiutil unmount /Volumes/Azul\ Zulu\ JDK\ 17.54+21 -force
 
 echo "Disable auto update"
 sudo defaults write /Library/Preferences/com.oracle.java.Java-Updater JavaAutoUpdateEnabled -bool false
 
-echo "JDK Version = 21.0.9" >> ~/versions.txt
+echo "JDK Version = 17.0.13" >> ~/versions.txt

coin/provisioning/common/shared/fix_ffmpeg_dependencies.sh

@@ -7,7 +7,6 @@ set -euox pipefail
 lib_dir="$1/lib"
 additional_suffix="${2:-}"
 set_rpath="${3:-yes}"
-page_size="${4:-}"
 
 # readelf and patchelf are prerequisite tools for this script. Check
 # that they are available.
@@ -82,12 +81,7 @@ for lib_name in "${ffmpeg_libs[@]}"; do
                 stub_name="${stub_name%%.*}${additional_suffix}.${stub_name#*.}" # Add additional_suffix
             fi
 
-            additional_command_args=""
-            if [ -n "$page_size" ]; then
-                additional_command_args+="--page-size ${page_size}"
-            fi
-
-            patchelf ${additional_command_args} --replace-needed "${BASH_REMATCH[1]}" "${stub_name}" "$lib_path"
+            patchelf --replace-needed "${BASH_REMATCH[1]}" "${stub_name}" "$lib_path"
         fi
     done <<< "$(read_needed_deps)"
 

coin/provisioning/common/shared/sbom_requirements.txt

@@ -4,5 +4,4 @@ ntia-conformance-checker ; python_version >= '3.9'
 sbomaudit ; python_version >= '3.9'
 sbom2doc ; python_version >= '3.9'
 reuse<=5.1.1 ; python_version >= '3.9'
-cyclonedx-python-lib==11.5.0 ; python_version >= '3.9'
-jsonschema>=4.20 ; python_version >= '3.12'
+cyclonedx-python-lib==11.0.0 ; python_version >= '3.9'

coin/provisioning/common/shared/testserver/qt_ubuntu_16.04/Dockerfile

@@ -1,10 +1,5 @@
 FROM ubuntu:16.04
 ARG COIN_RUNS_IN_QT_COMPANY
-RUN test x"$COIN_RUNS_IN_QT_COMPANY" = xtrue \
-  && { printf '%s\n' \
-  'deb [arch=amd64 trusted=yes] http://repo-clones-apt.ci.qt.io:8080 xenial-amd64 main restricted universe multiverse' \
-  'deb [arch=amd64 trusted=yes] http://repo-clones-apt.ci.qt.io:8080 xenial-updates-amd64 main restricted universe multiverse' \
-  'deb [arch=amd64 trusted=yes] http://repo-clones-apt.ci.qt.io:8080 xenial-backports-amd64 main restricted universe' \
-  'deb [arch=amd64 trusted=yes] http://repo-clones-apt.ci.qt.io:8080 xenial-security-amd64 main restricted universe multiverse' \
-> /etc/apt/sources.list; \
-  } \
+RUN  test x"$COIN_RUNS_IN_QT_COMPANY" = xtrue  \
+  && sed -i 's;\(archive\|security\)\.ubuntu\.com;repo-clones.ci.qt.io/apt-mirror/mirror;' /etc/apt/sources.list \
+  || echo "Internal package repository not found. Using public repositories."

coin/provisioning/common/shared/testserver/qt_ubuntu_18.04/Dockerfile

@@ -1,10 +1,5 @@
 FROM ubuntu:18.04
 ARG COIN_RUNS_IN_QT_COMPANY
-RUN test x"$COIN_RUNS_IN_QT_COMPANY" = xtrue \
-  && { printf '%s\n' \
-  'deb [arch=amd64 trusted=yes] http://repo-clones-apt.ci.qt.io:8080 bionic-amd64 main restricted universe multiverse' \
-  'deb [arch=amd64 trusted=yes] http://repo-clones-apt.ci.qt.io:8080 bionic-updates-amd64 main restricted universe multiverse' \
-  'deb [arch=amd64 trusted=yes] http://repo-clones-apt.ci.qt.io:8080 bionic-backports-amd64 main restricted universe' \
-  'deb [arch=amd64 trusted=yes] http://repo-clones-apt.ci.qt.io:8080 bionic-security-amd64 main restricted universe multiverse' \
-> /etc/apt/sources.list; \
-  } \
+RUN  test x"$COIN_RUNS_IN_QT_COMPANY" = xtrue  \
+  && sed -i 's;\(archive\|security\)\.ubuntu\.com;repo-clones.ci.qt.io/apt-mirror/mirror;' /etc/apt/sources.list \
+  || echo "Internal package repository not found. Using public repositories."

coin/provisioning/common/unix/common.sourced.sh

@@ -116,7 +116,7 @@ set_common_environment () {
     CMD_INSTALL="sudo install"
 
     COIN_RUNS_IN_QT_COMPANY=false
-    if  ping -c1 repo-clones-apt.ci.qt.io  >/dev/null 2>&1
+    if  ping -c1 repo-clones.ci.qt.io  >/dev/null 2>&1
     then
         COIN_RUNS_IN_QT_COMPANY=true
     fi

coin/provisioning/common/unix/ffmpeg-installation-utils.sh

@@ -3,12 +3,12 @@
 # SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
 
 ffmpeg_version_default() {
-    echo "n7.1.3"
+    echo "n7.1.2"
 }
 
 download_ffmpeg() {
     local version="${1:-$(ffmpeg_version_default)}"
-    local sha1="${2:-27051817deec88bed3b9652d49f9127d22268d83}"
+    local sha1="${2:-1e4e937facdbde15943dd093121836bf69f27c7c}"
 
     local ffmpeg_name="FFmpeg-$version"
     local target_dir="$HOME"

coin/provisioning/common/unix/install-ffmpeg-android.sh

@@ -24,46 +24,43 @@ assert_envvar_is_populated_dir() {
 }
 
 build_ffmpeg_android() {
-    local target_dir=$1
-    local ndk_root=$2
-    local openssl_android_path=$3
+    local target_arch=$1
+    local target_dir=$2
+    local ndk_root=$3
+    local openssl_android_path=$4
 
     sudo mkdir -p "$target_dir"
 
     local openssl_include="$openssl_android_path/include"
-    local target_arch
     local openssl_libs
     local libs_prefix
     local target_cpu
     local target_toolchain_arch
 
-    if [ "$os" == "android-x86" ]; then
-        target_toolchain_arch="i686-linux-android"
-        target_arch=x86
-        target_cpu=i686
-        openssl_libs="$openssl_android_path/x86"
-        libs_prefix="_x86"
-    elif [ "$os" == "android-x86_64" ]; then
+    if [ "$target_arch" == "x86_64" ]; then
         target_toolchain_arch="x86_64-linux-android"
         target_arch=x86_64
         target_cpu=x86-64
         openssl_libs="$openssl_android_path/x86_64"
         libs_prefix="_x86_64"
-    elif [ "$os" == "android-arm32" ]; then
+    elif [ "$target_arch" == "x86" ]; then
+        target_toolchain_arch="i686-linux-android"
+        target_arch=x86
+        target_cpu=i686
+        openssl_libs="$openssl_android_path/x86"
+        libs_prefix="_x86"
+    elif [ "$target_arch" == "arm32" ]; then
         target_toolchain_arch="armv7a-linux-androideabi"
         target_arch=arm
         target_cpu=armv7-a
         openssl_libs="$openssl_android_path/armeabi-v7a"
         libs_prefix="_arm32-v7a"
-    elif [ "$os" == "android-arm64" ]; then
+    elif [ "$target_arch" == "arm64" ]; then
         target_toolchain_arch="aarch64-linux-android"
         target_arch=aarch64
         target_cpu=armv8-a
         openssl_libs="$openssl_android_path/arm64-v8a"
         libs_prefix="_arm64-v8a"
-    else
-        >&2 echo "Unhandled android os param: $os"
-        exit 1
     fi
 
     ln -Ffs "${openssl_libs}/libcrypto_3.so" "${openssl_libs}/libcrypto.so"
@@ -85,13 +82,12 @@ build_ffmpeg_android() {
     local cc=${toolchain_bin}/${target_toolchain_arch}${api_version}-clang
     local ar=${toolchain_bin}/llvm-ar
     local ranlib=${toolchain_bin}/llvm-ranlib
-    local strip=${toolchain_bin}/llvm-strip
     local ffmpeg_config_options
 
     ffmpeg_config_options=$(get_ffmpeg_config_options $build_type)
     ffmpeg_config_options+=" --enable-cross-compile --target-os=android --enable-jni --enable-mediacodec --enable-openssl --enable-pthreads --enable-neon --disable-asm --disable-indev=android_camera"
     ffmpeg_config_options+=" --arch=$target_arch --cpu=${target_cpu} --sysroot=${sysroot} --sysinclude=${sysroot}/usr/include/"
-    ffmpeg_config_options+=" --cc=${cc} --cxx=${cxx} --ar=${ar} --ranlib=${ranlib} --strip=${strip}"
+    ffmpeg_config_options+=" --cc=${cc} --cxx=${cxx} --ar=${ar} --ranlib=${ranlib}"
     ffmpeg_config_options+=" --extra-cflags=-I${openssl_include} --extra-ldflags=-L${openssl_libs}"
     if [ $page_size == "use_16kb_page_size" ]; then
         ffmpeg_config_options+=" --extra-ldflags=-Wl,-z,max-page-size=16384"
@@ -119,35 +115,33 @@ build_ffmpeg_android() {
 
     if [[ "$build_type" == "shared" ]]; then
         local fix_dependencies="${BASH_SOURCE%/*}/../shared/fix_ffmpeg_dependencies.sh"
-
-        local page_size_arg=""
-        if [ $page_size == "use_16kb_page_size" ]; then
-            page_size_arg="16384"
-        fi
-
-        sudo "${fix_dependencies}" "${target_dir}" "${libs_prefix}" "no" "$page_size_arg"
+        sudo "${fix_dependencies}" "${target_dir}" "${libs_prefix}" "no"
     fi
 }
 
 if  [ "$os" == "android-x86" ]; then
+    target_arch=x86
     target_dir="/usr/local/android/ffmpeg-x86"
     envvar_latest="FFMPEG_DIR_ANDROID_X86_NDK_LATEST"
     envvar_nightly1="FFMPEG_DIR_ANDROID_X86_NDK_NIGHTLY1"
     envvar_nightly2="FFMPEG_DIR_ANDROID_X86_NDK_NIGHTLY2"
     envvar_preview="FFMPEG_DIR_ANDROID_X86_NDK_PREVIEW"
 elif  [ "$os" == "android-x86_64" ]; then
+    target_arch=x86_64
     target_dir="/usr/local/android/ffmpeg-x86_64"
     envvar_latest="FFMPEG_DIR_ANDROID_X86_64_NDK_LATEST"
     envvar_nightly1="FFMPEG_DIR_ANDROID_X86_64_NDK_NIGHTLY1"
     envvar_nightly2="FFMPEG_DIR_ANDROID_X86_64_NDK_NIGHTLY2"
     envvar_preview="FFMPEG_DIR_ANDROID_X86_64_NDK_PREVIEW"
 elif  [ "$os" == "android-arm32" ]; then
+    target_arch=arm32
     target_dir="/usr/local/android/ffmpeg-arm32"
     envvar_latest="FFMPEG_DIR_ANDROID_ARM32_NDK_LATEST"
     envvar_nightly1="FFMPEG_DIR_ANDROID_ARM32_NDK_NIGHTLY1"
     envvar_nightly2="FFMPEG_DIR_ANDROID_ARM32_NDK_NIGHTLY2"
     envvar_preview="FFMPEG_DIR_ANDROID_ARM32_NDK_PREVIEW"
 elif  [ "$os" == "android-arm64" ]; then
+    target_arch=arm64
     target_dir="/usr/local/android/ffmpeg-arm64"
     envvar_latest="FFMPEG_DIR_ANDROID_ARM64_NDK_LATEST"
     envvar_nightly1="FFMPEG_DIR_ANDROID_ARM64_NDK_NIGHTLY1"
@@ -165,26 +159,26 @@ fi
 
 assert_envvar_is_populated_dir "ANDROID_NDK_ROOT_LATEST"
 assert_envvar_is_populated_dir "OPENSSL_ANDROID_HOME_LATEST"
-build_ffmpeg_android "$target_dir/latest" "$ANDROID_NDK_ROOT_LATEST" "$OPENSSL_ANDROID_HOME_LATEST"
+build_ffmpeg_android "$target_arch" "$target_dir/latest" "$ANDROID_NDK_ROOT_LATEST" "$OPENSSL_ANDROID_HOME_LATEST"
 set_ffmpeg_dir_env_var "$envvar_latest" "$target_dir/latest"
 
 if [ "${ANDROID_NDK_ROOT_PREVIEW}" ]; then
     assert_envvar_is_populated_dir "ANDROID_NDK_ROOT_PREVIEW"
     assert_envvar_is_populated_dir "OPENSSL_ANDROID_HOME_PREVIEW"
-    build_ffmpeg_android "$target_dir/preview" "$ANDROID_NDK_ROOT_PREVIEW" "$OPENSSL_ANDROID_HOME_PREVIEW"
+    build_ffmpeg_android "$target_arch" "$target_dir/preview" "$ANDROID_NDK_ROOT_PREVIEW" "$OPENSSL_ANDROID_HOME_PREVIEW"
     set_ffmpeg_dir_env_var "$envvar_preview" "$target_dir/preview"
 fi
 
 if [ "${ANDROID_NDK_ROOT_NIGHTLY1}" ]; then
     assert_envvar_is_populated_dir "ANDROID_NDK_ROOT_NIGHTLY1"
     assert_envvar_is_populated_dir "OPENSSL_ANDROID_HOME_NIGHTLY1"
-    build_ffmpeg_android "$target_dir/nightly1" "$ANDROID_NDK_ROOT_NIGHTLY1" "$OPENSSL_ANDROID_HOME_NIGHTLY1"
+    build_ffmpeg_android "$target_arch" "$target_dir/nightly1" "$ANDROID_NDK_ROOT_NIGHTLY1" "$OPENSSL_ANDROID_HOME_NIGHTLY1"
     set_ffmpeg_dir_env_var "$envvar_nightly1" "$target_dir/nightly1"
 fi
 
 if [ "${ANDROID_NDK_ROOT_NIGHTLY2}" ]; then
     assert_envvar_is_populated_dir "ANDROID_NDK_ROOT_NIGHTLY2"
     assert_envvar_is_populated_dir "OPENSSL_ANDROID_HOME_NIGHTLY2"
-    build_ffmpeg_android "$target_dir/nightly2" "$ANDROID_NDK_ROOT_NIGHTLY2" "$OPENSSL_ANDROID_HOME_NIGHTLY2"
+    build_ffmpeg_android "$target_arch" "$target_dir/nightly2" "$ANDROID_NDK_ROOT_NIGHTLY2" "$OPENSSL_ANDROID_HOME_NIGHTLY2"
     set_ffmpeg_dir_env_var "$envvar_nightly2" "$target_dir/nightly2"
 fi

coin/provisioning/common/unix/install-ffmpeg-ios.sh

@@ -0,0 +1,184 @@
+#!/usr/bin/env bash
+# Copyright (C) 2024 The Qt Company Ltd.
+# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
+
+# This script will build and install FFmpeg static libs
+# Can take an optional final parameter to control installation directory
+set -ex
+
+# Must match or be lower than the minimum iOS version supported by the version of Qt that is
+# is currently being built.
+readonly MINIMUM_IOS_VERSION="16.0"
+
+source "${BASH_SOURCE%/*}/../unix/ffmpeg-installation-utils.sh"
+
+ffmpeg_version=$(ffmpeg_version_default)
+ffmpeg_source_dir=$(download_ffmpeg)
+ffmpeg_config_options=$(get_ffmpeg_config_options "shared")
+default_prefix="/usr/local/ios/ffmpeg"
+prefix="${1:-$default_prefix}"
+dylib_regex="^@rpath/.*\.dylib$"
+
+build_ffmpeg_ios() {
+    local target_platform=$1
+    local target_cpu_arch=""
+    if [ "$target_platform" == "arm64-simulator" ]; then
+        target_sdk="iphonesimulator"
+        target_cpu_arch="arm64"
+        minos="-mios-simulator-version-min=$MINIMUM_IOS_VERSION"
+    elif [ "$target_platform" == "x86_64-simulator" ]; then
+        target_sdk="iphonesimulator"
+        target_cpu_arch="x86_64"
+        minos="-mios-simulator-version-min=$MINIMUM_IOS_VERSION"
+    elif [ "$target_platform" == "arm64-iphoneos" ]; then
+        target_sdk="iphoneos"
+        target_cpu_arch="arm64"
+        minos="-miphoneos-version-min=$MINIMUM_IOS_VERSION"
+    else
+        echo "Error when building FFmpeg for iOS. Unknown parameter given for target_platform: '${target_platform}'"
+        exit 1
+    fi
+
+    local build_dir="$ffmpeg_source_dir/build_ios/$target_platform"
+    sudo mkdir -p "$build_dir"
+    pushd "$build_dir"
+
+    # shellcheck disable=SC2086
+    sudo "$ffmpeg_source_dir/configure" $ffmpeg_config_options \
+    --sysroot="$(xcrun --sdk "$target_sdk" --show-sdk-path)" \
+    --enable-cross-compile \
+    --enable-optimizations \
+    --prefix=$prefix \
+    --arch=$target_cpu_arch \
+    --cc="xcrun --sdk ${target_sdk} clang -arch $target_cpu_arch" \
+    --cxx="xcrun --sdk ${target_sdk} clang++ -arch $target_cpu_arch" \
+    --target-os=darwin \
+    --extra-ldflags="$minos" \
+    --enable-shared \
+    --disable-static \
+    --install-name-dir='@rpath' \
+    --disable-audiotoolbox
+
+    sudo make install DESTDIR="$build_dir/installed" -j4
+    popd
+}
+
+build_info_plist() {
+    local file_path="$1"
+    local framework_name="$2"
+    local framework_id="$3"
+
+    # Apple plist format has a strict requirement that the version string
+    # contains up to 3 numerics separated by a dot. Meanwhile, FFmpeg versioning
+    # tends to use an 'n' prefix in their versioning. We use a regex to convert
+    # and verify the version string.
+    #
+    # https://developer.apple.com/documentation/bundleresources/information-property-list/cfbundleversion
+    local formatted_ffmpeg_version
+    if [[ $ffmpeg_version =~ ([0-9]+(\.[0-9]+){0,2}) ]]; then
+        formatted_ffmpeg_version="${BASH_REMATCH[1]}"
+    else
+        echo "Unable to format FFmpeg version string '$ffmpeg_version' into corresponding Apple Info.plist format"
+        exit 1
+    fi
+
+    local minimum_version_key="MinimumOSVersion"
+    local supported_platforms="iPhoneOS"
+
+    info_plist="<?xml version=\"1.0\" encoding=\"UTF-8\"?>
+<!DOCTYPE plist PUBLIC \"-//Apple//DTD PLIST 1.0//EN\" \"http://www.apple.com/DTDs/PropertyList-1.0.dtd\">
+<plist version=\"1.0\">
+<dict>
+    <key>CFBundleDevelopmentRegion</key>
+    <string>en</string>
+    <key>CFBundleExecutable</key>
+    <string>${framework_name}</string>
+    <key>CFBundleIdentifier</key>
+    <string>${framework_id}</string>
+    <key>CFBundleInfoDictionaryVersion</key>
+    <string>6.0</string>
+    <key>CFBundleName</key>
+    <string>${framework_name}</string>
+    <key>CFBundlePackageType</key>
+    <string>FMWK</string>
+    <key>CFBundleShortVersionString</key>
+    <string>${formatted_ffmpeg_version}</string>
+    <key>CFBundleVersion</key>
+    <string>${formatted_ffmpeg_version}</string>
+    <key>CFBundleSignature</key>
+    <string>????</string>
+    <key>${minimum_version_key}</key>
+    <string>${MINIMUM_IOS_VERSION}</string>
+    <key>CFBundleSupportedPlatforms</key>
+    <array>
+        <string>${supported_platforms}</string>
+    </array>
+    <key>NSPrincipalClass</key>
+    <string></string>
+</dict>
+</plist>"
+    echo $info_plist | sudo tee ${file_path} 1>/dev/null
+}
+
+
+create_framework() {
+    # Create a 'traditional' framework from the corresponding dylib.
+    local framework_name="$1"
+    local platform="$2" # For now it's either arm64, x86_64-simulator, see below.
+    local ffmpeg_library_path="$ffmpeg_source_dir/build_ios/${platform}/installed$prefix"
+    local framework_complete_path="${ffmpeg_library_path}/framework/${framework_name}.framework/${framework_name}"
+
+    sudo mkdir -p "${ffmpeg_library_path}/framework/${framework_name}.framework"
+    sudo cp "${ffmpeg_library_path}/lib/${framework_name}.dylib" "${ffmpeg_library_path}/framework/${framework_name}.framework/${framework_name}"
+
+    # Fix LC_ID_DYLIB (to be libavcodec.framework/libavcodec instead of @rpath/libavcodec.xx.yy.dylib
+    sudo install_name_tool -id @rpath/${framework_name}.framework/${framework_name} "${framework_complete_path}"
+
+    build_info_plist "${ffmpeg_library_path}/framework/${framework_name}.framework/Info.plist" "${framework_name}" "io.qt.ffmpegkit."${framework_name}
+
+    # Fix all FFmpeg-related LC_LOAD_DYLIB, similar to how we fixed LC_ID_DYLIB above:
+    otool -L "$framework_complete_path" | awk '/\t/ {print $1}' | egrep "$dylib_regex" | while read -r dependency_path; do
+        found_name=$(tmp=${dependency_path/*\/}; echo ${tmp/\.*})
+        if [ "$found_name" != "$framework_name" ]
+        then
+            sudo install_name_tool -change "$dependency_path" @rpath/${found_name}.framework/${found_name} "${framework_complete_path}"
+        fi
+    done
+    #sudo mkdir -p "$prefix/framework/"
+    #sudo cp -r "${ffmpeg_library_path}/framework/${framework_name}.framework" "$prefix/framework/"
+}
+
+create_xcframework() {
+    # Create 'traditional' framework from the corresponding dylib,
+    # also creating
+    local framework_name="$1"
+    local target_platform_a="$2"
+    local target_platform_b="$3"
+
+    local fw_a="$ffmpeg_source_dir/build_ios/${target_platform_a}/installed$prefix/framework/${framework_name}.framework"
+    local fw_b="$ffmpeg_source_dir/build_ios/${target_platform_b}/installed$prefix/framework/${framework_name}.framework"
+
+    sudo mkdir -p "$prefix/lib/"
+    sudo xcodebuild -create-xcframework -framework $fw_a -framework $fw_b -output "${prefix}/lib/${framework_name}.xcframework"
+}
+
+build_ffmpeg_ios "x86_64-simulator"
+build_ffmpeg_ios "arm64-iphoneos"
+
+ffmpeg_libs="libavcodec libavformat libavutil libswresample libswscale"
+
+for name in $ffmpeg_libs; do
+    create_framework $name "arm64-iphoneos"
+    create_framework $name "x86_64-simulator"
+done
+
+# Create corresponding (xc)frameworks containing both arm64 and arm64-simulator frameworks:
+for name in $ffmpeg_libs; do
+    create_xcframework $name "arm64-iphoneos" "x86_64-simulator"
+done
+
+# xcframeworks are already installed directly into the target output directory.
+# We need to install headers
+sudo cp -r "$ffmpeg_source_dir/build_ios/arm64-iphoneos/installed$prefix/include" $prefix
+
+set_ffmpeg_dir_env_var "FFMPEG_DIR_IOS" $prefix

coin/provisioning/common/unix/install-openssl.sh

@@ -37,7 +37,6 @@ if [[ "$os" == "linux" ]]; then
     make && make install_sw install_ssldirs
     SetEnvVar "OPENSSL_HOME" "$opensslHome"
     SetEnvVar "PATH" "\"$opensslHome/bin:\$PATH\""
-    SetEnvVar "PKG_CONFIG_PATH" "\"$opensslHome/lib64/pkgconfig:\$PKG_CONFIG_PATH\""
     if uname -a |grep -q "Debian"; then
         SetEnvVar "LD_LIBRARY_PATH" "\"$opensslHome/lib:$LD_LIBRARY_PATH\""
     else

coin/provisioning/common/unix/install_grpc.sh

@@ -63,7 +63,6 @@ cmake "$targetDir" -G"Ninja Multi-Config" \
     -DCMAKE_POSITION_INDEPENDENT_CODE=ON \
     -DCMAKE_CONFIGURATION_TYPES="Release;Debug;RelWithDebugInfo" \
     -DCMAKE_INSTALL_PREFIX="$installPrefix" \
-    -DCMAKE_POLICY_VERSION_MINIMUM=3.5 \
     "${extraCMakeArgs[@]}" \
     "$extraOpenSslArg" \
     -DgRPC_BUILD_TESTS=OFF \

coin/provisioning/common/unix/install_openapi.sh

@@ -8,10 +8,10 @@
 source "${BASH_SOURCE%/*}/DownloadURL.sh"
 source "${BASH_SOURCE%/*}/SetEnvVar.sh"
 
-version="7.18.0"
+version="7.15.0"
 PrimaryUrl="http://ci-files01-hki.ci.qt.io/input/qtopenapi/openapi_client_generators/openapi-generator-cli-$version.jar"
 AltUrl="https://repo1.maven.org/maven2/org/openapitools/openapi-generator-cli/$version/openapi-generator-cli-$version.jar"
-SHA1="8bd615a50b15ebf5be30e612af112526a6e81ac4"
+SHA1="bb58e257f724fb46b7f2b309a9fa98e63fd7199f"
 targetFolder="/opt/qt-openapi/"
 targetFile="openapi-generator-cli.jar"
 

coin/provisioning/common/unix/libclang-dyn.sh

@@ -16,7 +16,6 @@ source "${BASH_SOURCE%/*}/SetEnvVar.sh"
 # shellcheck source=./DownloadURL.sh
 source "${BASH_SOURCE%/*}/DownloadURL.sh"
 
-zswitch=$1 # Since 7z 25.01 multi-hop symbolic links are restricted with -snl switch levels
 version="20.1.3"
 baseUrl="https://download.qt.io/development_releases/prebuilt/libclang"
 cachedUrl="http://ci-files01-hki.ci.qt.io/input/libclang/dynamic"
@@ -41,7 +40,7 @@ DownloadURL "$url_cached" "$url" "$sha1" "$zip"
 if command -v 7zr &> /dev/null; then
     sudo 7zr x $zip -o/usr/local/
 else
-    sudo 7z x $zswitch $zip -o/usr/local/
+    sudo 7z x $zip -o/usr/local/
 fi
 sudo mv /usr/local/libclang "$destination"
 rm -rf $zip

coin/provisioning/common/unix/libclang.sh

@@ -20,7 +20,6 @@ PROVISIONING_DIR="$(dirname "$0")/../../"
 # shellcheck source=./common.sourced.sh
 source "$PROVISIONING_DIR"/common/unix/common.sourced.sh
 
-zswitch=$1 # Since 7z 25.01 multi-hop symbolic links are restricted with -snl switch levels
 libclang_version="20.1.0"
 
 if uname -a |grep -q Darwin; then
@@ -62,7 +61,7 @@ DownloadURL $url_cached $url $sha1 $zip
 if command -v 7zr &> /dev/null; then
     sudo 7zr x $zip -o/usr/local/
 else
-    sudo 7z x $zswitch $zip -o/usr/local/
+    sudo 7z x $zip -o/usr/local/
 fi
 sudo mv /usr/local/libclang "$destination"
 rm -rf $zip

coin/provisioning/common/unix/openssl_for_android.sh

@@ -13,22 +13,18 @@ source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
 sslVersionForLatest="3.0.7"
 ndkVersionLatest="r27c"
-featureSuffixLatest="_16kb"
 prebuiltOpensslShaLatest="2cc15dd990460c2c7157ab257a47071fbd9e0ac8"
 
 sslVersionForPreview="3.0.7"
 ndkVersionPreview="r29-beta2"
-featureSuffixPreview="_16kb"
 prebuiltOpensslShaPreview="76c9788216440111be97ea1a63c4d8cd807baacd"
 
 ndkVersionNightly1=$ndkVersionLatest
 sslVersionForNightly1=$sslVersionForLatest
-featureSuffixNightly1=""
 prebuiltOpensslShaNightly1=$prebuiltOpensslShaLatest
 
 ndkVersionNightly2=$ndkVersionLatest
 sslVersionForNightly2=$sslVersionForLatest
-featureSuffixNightly2=""
 prebuiltOpensslShaNightly2=$prebuiltOpensslShaLatest
 
 : <<'EOB' SOURCE BUILD INSTRUCTIONS - Openssl prebuilt was made using Android NDK r29-beta2
@@ -66,52 +62,38 @@ EOB
 function InstallPrebuiltOpenssl() {
 
     ndkVersion=$1
-    suffix=$2
-    sha=$3
-    sslVersion=$4
+    sha=$2
+    sslVersion=$3
 
-    renamed_root="${HOME}/prebuilt-openssl-${sslVersion}-for-android-ndk-${ndkVersion}${suffix}"
+    opensslHome="${HOME}/prebuilt-openssl-${sslVersion}-for-android-ndk-${ndkVersion}_16kb"
+    if [[ ! -d ${opensslHome} ]]; then
+        prebuiltUrl="http://ci-files01-hki.ci.qt.io/input/openssl/prebuilt-openssl-${sslVersion}-for-android-ndk-${ndkVersion}_16kb.zip"
+        targetFile="/tmp/prebuilt-openssl-${sslVersion}-for-android-ndk-${ndkVersion}_16kb.zip"
 
-    prebuiltUrl="http://ci-files01-hki.ci.qt.io/input/openssl/prebuilt-openssl-${sslVersion}-for-android-ndk-${ndkVersion}${suffix}.zip"
-    targetFile="/tmp/prebuilt-openssl-${sslVersion}-for-android-ndk-${ndkVersion}${suffix}.zip"
-
-    DownloadURL "$prebuiltUrl" "$prebuiltUrl" "$sha" "$targetFile"
-
-    tmp_extract="$(mktemp -d "${TMPDIR:-/tmp}/openssl-extract.XXXXXX")"
-    unzip -q -o "$targetFile" -d "$tmp_extract"
-    sudo rm -f "$targetFile"
-
-    # We assume there is only one top-level directory in the openssl zip
-    temp_openssl_root="$(find "$tmp_extract" -mindepth 1 -maxdepth 1 -type d | head -n 1)"
-    if [[ -z "$temp_openssl_root" ]]; then
-        echo "ERROR: Expected a single top-level directory in the archive, but none was found." >&2
-        return 1
+        DownloadURL "$prebuiltUrl" "$prebuiltUrl" "$sha" "$targetFile"
+        unzip -o "$targetFile" -d "${HOME}"
+        sudo rm -f "$targetFile"
     fi
-
-    mv "$temp_openssl_root" "$renamed_root"
-    rm -rf "$tmp_extract"
-
-    opensslHome="${renamed_root}"
 }
 
 if [ "$ndkVersionNightly1" != "$ndkVersionLatest" ]; then
-    InstallPrebuiltOpenssl "$ndkVersionNightly1" "$featureSuffixNightly1" "$prebuiltOpensslShaNightly1" "$sslVersionForNightly1"
+    InstallPrebuiltOpenssl $ndkVersionNightly1 $prebuiltOpensslShaNightly1 $sslVersionForNightly1
     SetEnvVar "OPENSSL_ANDROID_HOME_NIGHTLY1" "$opensslHome"
     echo "OpenSSL for Android $ndkVersionNightly1 = $sslVersionForNightly1" >> ~/versions.txt
 fi
 
 if [ "$ndkVersionNightly2" != "$ndkVersionLatest" ]; then
-    InstallPrebuiltOpenssl "$ndkVersionNightly2" "$featureSuffixNightly2" "$prebuiltOpensslShaNightly2" "$sslVersionForNightly2"
+    InstallPrebuiltOpenssl $ndkVersionNightly2 $prebuiltOpensslShaNightly2 $sslVersionForNightly2
     SetEnvVar "OPENSSL_ANDROID_HOME_NIGHTLY2" "$opensslHome"
     echo "OpenSSL for Android $ndkVersionNightly2 = $sslVersionForNightly2" >> ~/versions.txt
 fi
 
 if [ "$ndkVersionPreview" != "$ndkVersionLatest" ]; then
-    InstallPrebuiltOpenssl "$ndkVersionPreview" "$featureSuffixPreview" "$prebuiltOpensslShaPreview" "$sslVersionForPreview"
+    InstallPrebuiltOpenssl $ndkVersionPreview $prebuiltOpensslShaPreview $sslVersionForPreview
     SetEnvVar "OPENSSL_ANDROID_HOME_PREVIEW" "$opensslHome"
     echo "OpenSSL for Android $ndkVersionPreview = $sslVersionForPreview" >> ~/versions.txt
 fi
 
-InstallPrebuiltOpenssl "$ndkVersionLatest" "$featureSuffixLatest" "$prebuiltOpensslShaLatest" "$sslVersionForLatest"
+InstallPrebuiltOpenssl $ndkVersionLatest $prebuiltOpensslShaLatest $sslVersionForLatest
 SetEnvVar "OPENSSL_ANDROID_HOME_LATEST" "$opensslHome"
 echo "OpenSSL for Android $ndkVersionLatest = $sslVersionForLatest" >> ~/versions.txt

coin/provisioning/common/windows/install-ffmpeg.ps1

@@ -7,9 +7,9 @@
 # This script will install FFmpeg
 $msys = "C:\Utils\msys64\usr\bin\bash"
 
-$version="n7.1.3"
+$version="n7.1.2"
 $url_public="https://github.com/FFmpeg/FFmpeg/archive/refs/tags/$version.tar.gz"
-$sha1="27051817deec88bed3b9652d49f9127d22268d83"
+$sha1="1e4e937facdbde15943dd093121836bf69f27c7c"
 $url_cached="http://ci-files01-hki.ci.qt.io/input/ffmpeg/$version.tar.gz"
 $ffmpeg_name="FFmpeg-$version"
 

coin/provisioning/common/windows/install-jdk.ps1

@@ -4,31 +4,31 @@
 . "$PSScriptRoot\helpers.ps1"
 
 # This script will install Java SE
-# https://www.oracle.com/java/technologies/javase/jdk21-archive-downloads.html
-$version_major = "21"
+# https://www.oracle.com/java/technologies/javase/jdk17-archive-downloads.html
+$version_major = "17"
 
 $cpu_arch = Get-CpuArchitecture
 switch ($cpu_arch) {
     arm64 {
-        $version = "21.0.9"
+        $version = "17.0.11"
         $arch = "aarch64"
-        $sha1 = "293cca7b76e3280573061f53dbe41ced527e3b4d"
-        # Using Microsoft build https://aka.ms/download-jdk/ - no .msi available
-        $url_official = "https://aka.ms/download-jdk/microsoft-jdk-${version}-windows-${arch}.exe"
-        $url_cache = "\\ci-files01-hki.ci.qt.io\provisioning\windows\microsoft-jdk-${version}-windows-${arch}.exe"
-        $javaPackage = "C:\Windows\Temp\jdk-$version.exe"
+        $sha1 = "1c5984a185778ad91498b746e677d84e153d5918"
+        # Using Microsoft build version of OpenJDK from: https://learn.microsoft.com/en-us/java/openjdk/download
+        # as there are no available Windows ARM64 versions of JDK from Oracle
+        $url_official = "https://aka.ms/download-jdk/microsoft-jdk-${version}-windows-${arch}.msi"
+        $url_cache = "\\ci-files01-hki.ci.qt.io\provisioning\windows\microsoft-jdk-${version}-windows-${arch}.msi"
+        $javaPackage = "C:\Windows\Temp\jdk-$version.msi"
         # Microsoft installer does not allow to override the installation path using the regular
         # TARGETDIR or INSTALLDIR properties, so just hardcode the path that it uses
-        $installdir = "C:\Program Files\Microsoft\jdk-$version-hotspot"
+        $installdir = "C:\Program Files\Microsoft\jdk-17.0.11.9-hotspot"
         Break
     }
     x64 {
-        $version = "21.0.9"
+        $version = "17.0.10"
         $arch = "x64"
-        $sha1 = "b4b10fd43993650053c41f377af37b37a2267b74"
-        # Downloading from https://aka.ms/download-jdk/microsoft-jdk-21.0.9-windows-x64.exe
-        $url_official = "https://aka.ms/download-jdk/microsoft-jdk-${version}_windows-${arch}.exe"
-        $url_cache = "\\ci-files01-hki.ci.qt.io\provisioning\windows\microsoft-jdk-$version-windows-$arch.exe"
+        $sha1 = "d573091930076c3ffa9f74273cb41cb5c75c5400"
+        $url_official = "https://download.oracle.com/java/17/archive/jdk-${version}_windows-${arch}_bin.exe"
+        $url_cache = "\\ci-files01-hki.ci.qt.io\provisioning\windows\jdk-$version-windows-$arch.exe"
         $javaPackage = "C:\Windows\Temp\jdk-$version.exe"
         $installdir = "C:\Program Files\Java\jdk-$version_major"
         Break
@@ -44,7 +44,7 @@ Download $url_official $url_cache $javaPackage
 Verify-Checksum $javaPackage $sha1
 
 if ($javaPackage.EndsWith(".exe")) {
-    Run-Executable "$javaPackage" "/SILENT /SUPPRESSMSGBOXES /ALLUSERS /DIR=`"$installdir`""
+    Run-Executable "$javaPackage" "/s SPONSORS=0"
 } else {
     Run-Executable "msiexec" "/quiet /i $javaPackage"
 }

coin/provisioning/qtci-linux-Debian-11.6-aarch64/02-apt.sh

@@ -54,9 +54,7 @@ installPackages+=(libgbm-dev)
 installPackages+=(libxkbfile-dev)
 installPackages+=(libxshmfence-dev)
 installPackages+=(libxss-dev)
-installPackages+=(rustc)
-installPackages+=(bindgen)
-installPackages+=(clang)
+# installPackages+=(nodejs) too old
 installPackages+=(python3-html5lib)
 #
 ## Common event loop handling

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/01-disable_net_lso.sh

@@ -1,4 +0,0 @@
-#!/bin/sh
-
-sudo ethtool -K ens3 tso off
-ethtool -k ens3 | grep tcp-segmentation-offload  # Output: tcp-segmentation-offload: off

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/01-install_telegraf.sh

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-"$(dirname "$0")"/../common/unix/telegraf_install.sh

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/01-refresh-subscription-manager.sh

@@ -1,15 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -e
-
-curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions_rhc.sh -o "/tmp/redhat_ak.sh" &>/dev/null
-sudo chmod 755 /tmp/redhat_ak.sh
-sudo /tmp/redhat_ak.sh
-
-# refresh local certificates
-sudo subscription-manager refresh
-
-sudo rm -f /tmp/redhat_ak.sh

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/01-remove_network_manager_secret_key.sh

@@ -1,11 +0,0 @@
-#!/usr/bin/env bash
-#Copyright (C) 2026 The Qt Company Ltd
-#SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-# Ipv6 link local becomes tentative and dadfailed if two systems has the same secret_key
-# New unique secret key will be created automatically during start up.
-# https://access.redhat.com/solutions/3553581
-echo "Removing secret_key"
-sudo rm -f "/var/lib/NetworkManager/secret_key"
-
-

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/01-systemsetup.sh

@@ -1,20 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-BASEDIR=$(dirname "$0")
-# shellcheck source=../common/shared/network_test_server_ip.txt
-source "$BASEDIR/../common/shared/network_test_server_ip.txt"
-
-echo "Set Network Test Server address to $network_test_server_ip in /etc/hosts"
-echo "$network_test_server_ip    qt-test-server qt-test-server.qt-test-net" | sudo tee -a /etc/hosts
-
-# Set timezone to UTC.
-sudo timedatectl set-timezone Etc/UTC
-
-"$BASEDIR/../common/linux/configure-gnome-shell.sh"
-
-echo "Disable windows key from showing the GNOME Shell Activities overlay"
-gsettings set org.gnome.mutter overlay-key ""

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/02-install-xcb_util_cursor.sh

@@ -1,10 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-# Install xcb-util-cursor* libraries before updating repos. In updated repos these libraries are no longer available.
-# QTQAINFRA-6325
-sudo yum -y install xcb-util-cursor
-sudo yum -y install xcb-util-cursor-devel

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/03-enable-repos.sh

@@ -1,62 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-echo "set WritePreparedUpdates=false" | sudo tee -a /etc/PackageKit/PackageKit.conf
-sudo systemctl stop packagekit
-sudo systemctl mask --now packagekit
-while sudo fuser /usr/libexec/packagekitd >/dev/null 2>&1; do
-    echo "Waiting for PackageKit to finish..."
-    sleep 1
-    sudo systemctl stop packagekit
-done
-sudo yum -y remove PackageKit gnome-software
-
-sudo subscription-manager config --rhsm.manage_repos=0
-sudo subscription-manager refresh
-
-# List available RHEL versions and bind with correct one
-sudo subscription-manager release --list
-
-# Do not update Tier 1 via GUI without using this same --set
-#   - To avoid System to have newer packages than RPMS which will cause update issues
-sudo subscription-manager release --set=10.0
-sudo yum clean all
-
-sudo tee "/etc/yum.repos.d/local.repo" > /dev/null <<EOC
-[rhel-10-for-x86_64-baseos-rpms]
-metadata_expire = 86400
-baseurl = http://repo-clones-rhel10.ci.qt.io/rhel-10-for-x86_64-baseos-rpms
-ui_repoid_vars = releasever basearch
-name = Qt Red Hat Enterprise Linux 10 Base OS (RPMs)
-gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
-enabled = 1
-gpgcheck = 1
-
-[rhel-10-for-x86_64-appstream-rpms]
-metadata_expire = 86400
-baseurl = http://repo-clones-rhel10.ci.qt.io/rhel-10-for-x86_64-appstream-rpms
-ui_repoid_vars = releasever basearch
-name = Qt Red Hat Enterprise Linux 10 Appstream (RPMs)
-gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
-enabled = 1
-gpgcheck = 1
-
-[codeready-builder-for-rhel-10-x86_64-rpms]
-metadata_expire = 86400
-baseurl = http://repo-clones-rhel10.ci.qt.io/codeready-builder-for-rhel-10-x86_64-rpms
-ui_repoid_vars = releasever basearch
-name = Qt Red Hat Enterprise Linux Codeready Builder (RPMs)
-gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
-enabled = 1
-gpgcheck = 1
-EOC
-
-# Epel is required for 'double-conversion-devel', 'libsqlite3x' and 'p7zip'
-sudo dnf install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-10.noarch.rpm
-
-sudo yum clean all
-# As well as this fetching the repository data, we also get a printout of the used repos
-sudo yum repolist

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/03-limit-avahi-interfaces.sh

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-BASEDIR=$(dirname "$0")
-"$BASEDIR/../common/linux/limit-avahi-interfaces.sh"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/04-install-packages.sh

@@ -1,206 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-# Remove update notifications and packagekit running in the background
-sudo yum -y remove PackageKit gnome-software
-
-# CI: All platforms should have up-to-date packages when new provision is made
-sudo yum -y update
-
-installPackages=()
-# Make sure needed ca-certificates are available
-installPackages+=(ca-certificates)
-installPackages+=(git)
-installPackages+=(zlib-devel)
-installPackages+=(glib2-devel)
-installPackages+=(openssl-devel)
-installPackages+=(freetype-devel)
-installPackages+=(fontconfig-devel)
-installPackages+=(curl-devel)
-installPackages+=(expat-devel)
-installPackages+=(gettext-devel)
-installPackages+=(perl-devel)
-# Required by some old pkg perl script, FindBin.pm was moved to new package in perl 5.32
-installPackages+=(perl-FindBin)
-installPackages+=(dh-autoreconf)
-# cmake build
-installPackages+=(ninja-build)
-installPackages+=(pcre2-devel)
-installPackages+=(double-conversion-devel)
-installPackages+=(zstd)
-installPackages+=(libzstd-devel)
-# EGL support
-installPackages+=(mesa-libEGL)
-
-installPackages+=(libxkbfile-devel)
-# Xinput2
-installPackages+=(libXi-devel)
-installPackages+=(mariadb-server)
-installPackages+=(mariadb)
-installPackages+=(mariadb-devel)
-installPackages+=(postgresql-devel)
-installPackages+=(cups-devel)
-installPackages+=(dbus-devel)
-# gstreamer 1 for QtMultimedia
-# Note! gstreamer1-plugins-bad-free needs to be upgraded or it will conflicts with gstreamer1-plugins-base-devel
-installPackages+=(gstreamer1-plugins-bad-free)
-installPackages+=(gstreamer1-devel)
-installPackages+=(gstreamer1-plugins-base-devel)
-# Not available for RHEL 10.0
-#installPackages+=(gstreamer1-plugin-openh264)
-# pipewire for QtMultimedia
-installPackages+=(pipewire-devel)
-# yasm for QtMultimedia
-installPackages+=(yasm)
-# gtk3 style for QtGui/QStyle
-installPackages+=(gtk3-devel)
-# libusb1 for tqtc-boot2qt/qdb
-installPackages+=(libusbx-devel)
-# speech-dispatcher-devel / flite-devel for QtSpeech
-installPackages+=(speech-dispatcher-devel)
-installPackages+=(flite-devel)
-# Python 2 devel and pip. python-pip requires the EPEL repository to be added
-# Python 2 no longer supported
-# installPackages+=(python2-devel python2-pip)
-# Python 3 with python-devel, pip and virtualenv
-installPackages+=(python3)
-installPackages+=(python3-devel)
-# WebEngine
-installPackages+=(bison)
-installPackages+=(flex)
-installPackages+=(gperftools-libs)
-installPackages+=(gperf)
-installPackages+=(alsa-lib-devel)
-installPackages+=(pulseaudio-libs-devel)
-installPackages+=(libdrm-devel)
-installPackages+=(libva-devel)
-installPackages+=(libXtst-devel)
-installPackages+=(libxshmfence-devel)
-installPackages+=(nspr-devel)
-installPackages+=(nss-devel)
-installPackages+=(python3-html5lib)
-installPackages+=(libstdc++-static)
-# For Android builds
-#installPackages+=(java-21-openjdk-devel.21.0.9.0.10-1.el10)
-installPackages+=(java-21-openjdk-devel)
-# For receiving shasum
-installPackages+=(perl-Digest-SHA)
-# INTEGRITY requirements
-# Not available for RHEL 10.0
-#installPackages+=(glibc.i686)
-# Enable Qt Bluetooth
-installPackages+=(bluez-libs-devel)
-# QtNfc
-installPackages+=(pcsc-lite-devel)
-# QtWebKit
-installPackages+=(libxml2-devel)
-installPackages+=(libxslt-devel)
-# For building Wayland from source
-installPackages+=(libffi-devel)
-# QtWayland
-# installPackages+=(mesa-libwayland-egl)
-# installPackages+=(mesa-libwayland-egl-devel)
-installPackages+=(libwayland-egl)
-installPackages+=(libwayland-client)
-installPackages+=(libwayland-cursor)
-installPackages+=(libwayland-server)
-# Jenkins
-installPackages+=(chrpath)
-# libxkbcommon
-installPackages+=(libxkbcommon-devel)
-installPackages+=(libxkbcommon-x11-devel)
-# xcb-util-* libraries
-installPackages+=(xcb-util)
-installPackages+=(xcb-util-devel)
-installPackages+=(xcb-util-image-devel)
-installPackages+=(xcb-util-keysyms-devel)
-installPackages+=(xcb-util-wm-devel)
-installPackages+=(xcb-util-renderutil-devel)
-installPackages+=(xcb-util-cursor)
-installPackages+=(xcb-util-cursor-devel)
-
-# ODBC support
-installPackages+=(unixODBC-devel)
-installPackages+=(unixODBC)
-# Vulkan support
-installPackages+=(vulkan-devel)
-installPackages+=(vulkan-tools)
-# Conan: For Python build
-installPackages+=(xz-devel)
-installPackages+=(zlib-devel)
-installPackages+=(libffi-devel)
-installPackages+=(libsqlite3x-devel)
-# Build.pl
-installPackages+=(perl-Data-Dumper)
-# In RedHat these come with Devtoolset
-installPackages+=(gcc)
-installPackages+=(gcc-c++)
-installPackages+=(make)
-# RHEL 10.0 has newer toolset
-#installPackages+=(gcc-toolset-12)
-# Open source VMware Tools
-installPackages+=(open-vm-tools)
-# nfs-utils is needed to make mount work with ci-files01
-installPackages+=(nfs-utils)
-# cifs-utils, for mounting smb drive
-installPackages+=(keyutils)
-installPackages+=(cifs-utils)
-# zip, needed for vcpkg caching
-installPackages+=(zip)
-# OpenSSL requirement, built by vcpkg
-installPackages+=(perl-IPC-Cmd)
-# password management support for Qt Creator
-installPackages+=(libsecret-devel)
-# For Firebird in RTA
-installPackages+=(libtommath-devel)
-# For tst_license.pl with all the machines generating SBOM
-installPackages+=(perl-JSON)
-installPackages+=(perl-Test-Simple) # To install Test::More module for SBOM
-# For qtgrpc build
-installPackages+=(zlib-static)
-
-sudo yum -y install "${installPackages[@]}"
-
-sudo dnf install nodejs-22.19.0-2.el10_0 -y
-# Required by QtCore
-sudo dnf install 'perl(English)' -y
-
-# We shouldn't use yum to install virtualenv. The one found from package repo is not
-# working, but we can use installed pip
-sudo pip3 install --upgrade pip
-# Configure pip
-sudo pip config --user set global.index https://ci-files01-hki.ci.qt.io/input/python_module_cache
-sudo pip config --user set global.extra-index-url https://pypi.org/simple/
-
-# Create SBOM virtual env compatible with RHEL 10.0 Python 3.12
-mkdir "/home/qt/sbom/"
-python3 -m venv /home/qt/sbom/venv
-/home/qt/sbom/venv/bin/pip install wheel
-/home/qt/sbom/venv/bin/pip install -r "${BASH_SOURCE%/*}/../common/shared/requirements.txt"
-
-# Provisioning during installation says:
-# 'The script sbom2doc is installed in '/usr/local/bin' which is not on PATH.'
-# hence the explicit assignment to SBOM_PYTHON_APPS_PATH.
-source "${BASH_SOURCE%/*}/../common/unix/SetEnvVar.sh"
-SetEnvVar "SBOM_PYTHON_APPS_PATH" "/home/qt/sbom/venv/bin"
-
-# Set SBOM_PYTHON_INTERP_PATH to Python3 instance which was used to install SBOM packages from requirements
-SetEnvVar "SBOM_PYTHON_INTERP_PATH" "/home/qt/sbom/venv/bin"
-
-# Make FindPython3.cmake to find python3
-sudo ln -s /usr/bin/python3 /usr/local/bin/python3
-
-gccVersion="$(gcc --version |grep -Eo '[0-9]+\.[0-9]+(\.[0-9]+)?' |head -n 1)"
-echo "GCC = $gccVersion" >> versions.txt
-
-glibcVersion="$(ldd --version |grep -Eo '[0-9]+\.[0-9]+(\.[0-9]+)?' |head -n 1)"
-echo "glibc = $glibcVersion" >> versions.txt
-
-OpenSSLVersion="$(openssl version |cut -b 9-14)"
-echo "System's OpenSSL = $OpenSSLVersion" >> ~/versions.txt
-
-# List all available updates
-sudo yum -y list updates

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/04-p7zip.sh

@@ -1,15 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-source "${BASH_SOURCE%/*}/../common/unix/DownloadURL.sh"
-
-set -ex
-
-name="p7zip"
-version="7-11"
-sudo yum -y install "$name"
-
-# Link 7za to 7z so we can use existing installation scripts
-sudo ln -s /usr/bin/7za /usr/bin/7z
-
-echo "$name = $version" >> ~/versions.txt

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/05-install-patchelf.sh

@@ -1,5 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-source "${BASH_SOURCE%/*}/../common/unix/install-patchelf.sh"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/05-libclang-dyn.sh

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-#Copyright (C) 2026 The Qt Company Ltd
-#SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-set -ex
-
-BASEDIR=$(dirname "$0")
-# shellcheck source=../common/unix/libclang-dyn.sh
-"$BASEDIR/../common/unix/libclang-dyn.sh" "-snld10"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/05-libclang.sh

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-#Copyright (C) 2026 The Qt Company Ltd
-#SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-set -ex
-
-BASEDIR=$(dirname "$0")
-# shellcheck source=../common/unix/libclang.sh
-"$BASEDIR/../common/unix/libclang.sh" "-snld10"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/05-mount-vcpkg-cache-drive.sh

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-# shellcheck source=../common/linux/mount-vcpkg-cache-drive.sh
-source "${BASH_SOURCE%/*}/../common/linux/mount-vcpkg-cache-drive.sh"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/09-disable_selinux.sh

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-# shellcheck source=../common/linux/disable_selinux.sh
-source "${BASH_SOURCE%/*}/../common/linux/disable_selinux.sh"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/20-sccache.sh

@@ -1,3 +0,0 @@
-#!/usr/bin/env bash
-
-source "${BASH_SOURCE%/*}/../common/linux/sccache.sh"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/22-mqtt_broker.sh

@@ -1,6 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-# shellcheck source=../common/unix/mqtt_broker.sh
-source "${BASH_SOURCE%/*}/../common/unix/mqtt_broker.sh"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/30-install_icu.sh

@@ -1,45 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-# shellcheck source=../common/unix/DownloadURL.sh
-source "${BASH_SOURCE%/*}/../common/unix/DownloadURL.sh"
-
-set -ex
-
-# This script will install ICU
-
-icuVersion="73.2"
-icuLocation="/usr/lib64"
-sha1="d2bbb7b2a9a9ee00dba5cc6a68137f6c8a98c27e"
-baseBinaryPackageURL="http://ci-files01-hki.ci.qt.io/input/icu/$icuVersion/icu-linux-g++-Rhel8.6-x64.7z"
-baseBinaryPackageExternalURL="http://master.qt.io/development_releases/prebuilt/icu/prebuilt/$icuVersion/icu-linux-g++-Rhel8.6-x64.7z"
-
-sha1Dev="edc9cba31ffeac28bf7360c52b85b5e4d2f39043"
-develPackageURL="http://ci-files01-hki.ci.qt.io/input/icu/$icuVersion/icu-linux-g++-Rhel8.6-x64-devel.7z"
-develPackageExternalURL="http://master.qt.io/development_releases/prebuilt/icu/prebuilt/$icuVersion/icu-linux-g++-Rhel8.6-x64-devel.7z"
-
-echo "Installing custom ICU $icuVersion $sha1 packages on RHEL to $icuLocation"
-
-targetFile=$(mktemp)
-DownloadURL "$baseBinaryPackageURL" "$baseBinaryPackageExternalURL" "$sha1" "$targetFile"
-sudo 7z x -snld10 -y -o/usr/lib64 "$targetFile"
-sudo rm "$targetFile"
-
-echo "Installing custom ICU devel packages on RHEL"
-
-tempDir=$(mktemp -d)
-
-targetFile=$(mktemp)
-DownloadURL "$develPackageURL" "$develPackageExternalURL" "$sha1Dev" "$targetFile"
-7z x -snld10 -y -o"$tempDir" "$targetFile"
-
-sudo cp -a "$tempDir"/lib/* /usr/lib64
-sudo cp -a "$tempDir"/* /usr/
-
-sudo rm "$targetFile"
-sudo rm -fr "$tempDir"
-
-sudo /sbin/ldconfig
-
-echo "ICU = $icuVersion" >> ~/versions.txt

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/40-android_linux.sh

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-# shellcheck source=../common/linux/android_linux.sh
-source "${BASH_SOURCE%/*}/../common/linux/android_linux.sh"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/40-install-cmake.sh

@@ -1,12 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-# This script installs CMake 3.6.2
-
-set -ex
-
-# CMake is needed for autotests that verify that Qt can be built with CMake
-
-# shellcheck source=../common/linux/cmake_linux.sh
-source "${BASH_SOURCE%/*}/../common/linux/cmake_linux.sh"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/41-install-bundletool.sh

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-# shellcheck source=../common/linux/install-android-bundletool.sh
-source "${BASH_SOURCE%/*}/../common/linux/install-android-bundletool.sh"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/41-install-golang.sh

@@ -1,7 +0,0 @@
-#!/usr/bin/env bash
-#Copyright (C) 2026 The Qt Company Ltd
-#SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-source "${BASH_SOURCE%/*}/../common/unix/install-golang.sh" "linux"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/42-install-vcpkg-ports.sh

@@ -1,6 +0,0 @@
-#!/usr/bin/env bash
-
-set -ex
-
-BASEDIR=$(dirname "$0")
-"$BASEDIR/../common/linux/install-vcpkg-ports.sh" x64-linux-qt

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/61-install_grpc.sh

@@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-# shellcheck source=../common/unix/install_grpc.sh
-source "${BASH_SOURCE%/*}/../common/unix/install_grpc.sh"
-

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/70-install_QemuGA.sh

@@ -1,10 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-# This script installs QEMU Guest Agent
-
-set -ex
-
-sudo yum -y install qemu-guest-agent
-sudo systemctl start qemu-guest-agent

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/70-install_dwz.sh

@@ -1,11 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 Konstantin Tokarev <annulen@yandex.ru>
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-sudo yum -y install elfutils-libelf-devel
-
-# shellcheck source=../common/linux/install_dwz.sh
-source "${BASH_SOURCE%/*}/../common/linux/install_dwz.sh"
-

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/90-bootstrap-autostart.sh

@@ -1,3 +0,0 @@
-#!/usr/bin/env bash
-
-source "${BASH_SOURCE%/*}/../common/linux/bootstrap-autostart.sh"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/90-firebird.sh

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-BASEDIR=$(dirname "$0")
-"$BASEDIR/../common/linux/install-firebird.sh"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/90-install-ffmpeg.sh

@@ -1,5 +0,0 @@
-#!/usr/bin/env bash
-
-source "${BASH_SOURCE%/*}/../common/linux/install-ffmpeg-linux.sh"
-source "${BASH_SOURCE%/*}/../common/unix/install-ffmpeg-android.sh" "android-x86_64" "use_16kb_page_size"
-source "${BASH_SOURCE%/*}/../common/unix/install-ffmpeg-android.sh" "android-x86" "use_4kb_page_size"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/90-install-oracle.sh

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-BASEDIR=$(dirname "$0")
-"$BASEDIR/../common/linux/install-oracle.sh"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/90-mimer.sh

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-BASEDIR=$(dirname "$0")
-"$BASEDIR/../common/linux/mimersql.sh" "openssl-3" "rpm"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/99-enable_test_stacktraces.sh

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-#Copyright (C) 2026 The Qt Company Ltd
-#SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-set -ex
-
-BASEDIR=$(dirname "$0")
-"$BASEDIR"/../common/linux/enable_test_stacktraces.sh

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/99-network-test.sh

@@ -1,3 +0,0 @@
-#!/usr/bin/env bash
-BASEDIR=$(dirname "$0")
-"$BASEDIR/../common/linux/install-network-test.sh" "--warn-only"

coin/provisioning/qtci-linux-RHEL-10.0-x86_64/99-version.sh

@@ -1,17 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
-# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
-
-# This script needs to be called last during provisioning so that the software information will show up last in provision log.
-
-# Storage installed RPM packages information
-
-set -ex
-
-# shellcheck disable=SC2129
-echo "*********************************************" >> ~/versions.txt
-echo "***** All installed RPM packages *****" >> ~/versions.txt
-rpm -q -a | sort >> ~/versions.txt
-echo "*********************************************" >> ~/versions.txt
-
-"$(dirname "$0")/../common/linux/version.sh"

coin/provisioning/qtci-linux-RHEL-8.10-x86_64/01-refresh-subscription-manager.sh

@@ -5,11 +5,14 @@
 
 set -e
 
-curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions_rhc.sh -o "/tmp/redhat_ak.sh" &>/dev/null
+curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions.sh -o "/tmp/redhat_ak.sh" &>/dev/null
 sudo chmod 755 /tmp/redhat_ak.sh
-sudo /tmp/redhat_ak.sh
+/tmp/redhat_ak.sh
 
 # refresh local certificates
 sudo subscription-manager refresh
 
+# Attach available subscriptions to system. This is needed when subscriptions are renewed.
+sudo subscription-manager attach --auto
+
 sudo rm -f /tmp/redhat_ak.sh

coin/provisioning/qtci-linux-RHEL-8.10-x86_64/03-enable-repos.sh

@@ -14,7 +14,7 @@ while sudo fuser /usr/libexec/packagekitd >/dev/null 2>&1; do
 done
 sudo yum -y remove PackageKit gnome-software
 
-sudo subscription-manager config --rhsm.manage_repos=1
+sudo subscription-manager config --rhsm.manage_repos=0
 sudo subscription-manager refresh
 
 # List available RHEL versions and bind with correct one
@@ -22,10 +22,35 @@ sudo subscription-manager release --list
 sudo subscription-manager release --set=8.10
 sudo yum clean all
 
-# sudo yum config-manager --enable 'rhceph-4-tools-for-rhel-8-x86_64-rpms'
-sudo yum config-manager --enable 'codeready-builder-for-rhel-8-x86_64-rpms'
-sudo yum config-manager --enable 'rhel-8-for-x86_64-baseos-rpms'
-sudo yum config-manager --enable 'rhel-8-for-x86_64-appstream-rpms'
+sudo tee "/etc/yum.repos.d/local.repo" > /dev/null <<EOC
+[rhel-8-for-x86_64-baseos-rpms]
+metadata_expire = 86400
+baseurl = http://repo-clones.ci.qt.io/repos/rhel-8-for-x86_64-baseos-rpms
+ui_repoid_vars = releasever basearch
+name = Qt Red Hat Enterprise Linux 8 Base OS (RPMs)
+gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
+enabled = 1
+gpgcheck = 1
+
+[rhel-8-for-x86_64-appstream-rpms]
+metadata_expire = 86400
+baseurl = http://repo-clones.ci.qt.io/repos/rhel-8-for-x86_64-appstream-rpms
+ui_repoid_vars = releasever basearch
+name = Qt Red Hat Enterprise Linux 8 Appstream (RPMs)
+gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
+enabled = 1
+gpgcheck = 1
+
+[codeready-builder-for-rhel-8-x86_64-rpms]
+metadata_expire = 86400
+baseurl = http://repo-clones.ci.qt.io/repos/codeready-builder-for-rhel-8-x86_64-rpms
+ui_repoid_vars = releasever basearch
+name = Qt Red Hat Enterprise Linux Codeready Builder (RPMs)
+gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
+enabled = 1
+gpgcheck = 1
+EOC
+
 # Epel is required for 'double-conversion-devel', 'libsqlite3x' and 'p7zip'
 sudo dnf install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
 

coin/provisioning/qtci-linux-RHEL-8.10-x86_64/04-install-packages.sh

@@ -17,6 +17,8 @@ installPackages+=(ca-certificates)
 installPackages+=(git)
 installPackages+=(zlib-devel)
 installPackages+=(glib2-devel)
+installPackages+=(openssl3)
+installPackages+=(openssl3-devel)
 installPackages+=(freetype-devel)
 installPackages+=(fontconfig-devel)
 installPackages+=(curl-devel)
@@ -90,7 +92,7 @@ installPackages+=(nss-devel)
 installPackages+=(libatomic)
 installPackages+=(mesa-libgbm-devel-21.3.4-1.el8.x86_64)
 # For Android builds
-installPackages+=(java-21-openjdk-devel-21.0.9.0.10-1.el9)
+installPackages+=(java-17-openjdk-devel-17.0.9.0.9)
 # For receiving shasum
 installPackages+=(perl-Digest-SHA)
 # INTEGRITY requirements
@@ -189,5 +191,8 @@ echo "GCC = $gccVersion" >> versions.txt
 glibcVersion="$(ldd --version |grep -Eo '[0-9]+\.[0-9]+(\.[0-9]+)?' |head -n 1)"
 echo "glibc = $glibcVersion" >> versions.txt
 
+OpenSSLVersion="$(openssl3 version |cut -b 9-14)"
+echo "System's OpenSSL = $OpenSSLVersion" >> ~/versions.txt
+
 # List all available updates
 sudo yum -y list updates

coin/provisioning/qtci-linux-RHEL-8.2-x86_64/04-install-packages.sh

@@ -71,7 +71,7 @@ installPackages+=(nspr-devel)
 installPackages+=(nss-devel)
 installPackages+=(python3-html5lib)
 # For Android builds
-installPackages+=(java-21-openjdk-devel)
+installPackages+=(java-11-openjdk-devel)
 # For receiving shasum
 installPackages+=(perl-Digest-SHA)
 # INTEGRITY requirements

coin/provisioning/qtci-linux-RHEL-8.4-x86_64/01-refresh-subscription-manager.sh

@@ -5,11 +5,14 @@
 
 set -e
 
-curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions_rhc.sh -o "/tmp/redhat_ak.sh" &>/dev/null
+curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions.sh -o "/tmp/redhat_ak.sh" &>/dev/null
 sudo chmod 755 /tmp/redhat_ak.sh
-sudo /tmp/redhat_ak.sh
+/tmp/redhat_ak.sh
 
 # refresh local certificates
 sudo subscription-manager refresh
 
+# Attach available subscriptions to system. This is needed when subscriptions are renewed.
+sudo subscription-manager attach --auto
+
 sudo rm -f /tmp/redhat_ak.sh

coin/provisioning/qtci-linux-RHEL-8.4-x86_64/03-enable-repos.sh

@@ -9,7 +9,7 @@ sudo systemctl stop packagekit
 sudo systemctl disable packagekit
 sudo yum -y remove PackageKit gnome-software
 
-sudo subscription-manager config --rhsm.manage_repos=1
+sudo subscription-manager config --rhsm.manage_repos=0
 sudo subscription-manager refresh
 
 # List available RHEL versions and bind with correct one
@@ -17,10 +17,35 @@ sudo subscription-manager release --list
 sudo subscription-manager release --set=8.4
 sudo yum clean all
 
-# sudo yum config-manager --enable 'rhceph-4-tools-for-rhel-8-x86_64-rpms'
-sudo yum config-manager --enable 'codeready-builder-for-rhel-8-x86_64-rpms'
-sudo yum config-manager --enable 'rhel-8-for-x86_64-baseos-rpms'
-sudo yum config-manager --enable 'rhel-8-for-x86_64-appstream-rpms'
+sudo tee "/etc/yum.repos.d/local.repo" > /dev/null <<EOC
+[rhel-8-for-x86_64-baseos-rpms]
+metadata_expire = 86400
+baseurl = http://repo-clones.ci.qt.io/repos/rhel-8-for-x86_64-baseos-rpms
+ui_repoid_vars = releasever basearch
+name = Qt Red Hat Enterprise Linux 8 Base OS (RPMs)
+gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
+enabled = 1
+gpgcheck = 1
+
+[rhel-8-for-x86_64-appstream-rpms]
+metadata_expire = 86400
+baseurl = http://repo-clones.ci.qt.io/repos/rhel-8-for-x86_64-appstream-rpms
+ui_repoid_vars = releasever basearch
+name = Qt Red Hat Enterprise Linux 8 Appstream (RPMs)
+gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
+enabled = 1
+gpgcheck = 1
+
+[codeready-builder-for-rhel-8-x86_64-rpms]
+metadata_expire = 86400
+baseurl = http://repo-clones.ci.qt.io/repos/codeready-builder-for-rhel-8-x86_64-rpms
+ui_repoid_vars = releasever basearch
+name = Qt Red Hat Enterprise Linux Codeready Builder (RPMs)
+gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
+enabled = 1
+gpgcheck = 1
+EOC
+
 # Epel is required for 'double-conversion-devel', 'libsqlite3x' and 'p7zip'
 sudo dnf install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
 

coin/provisioning/qtci-linux-RHEL-8.4-x86_64/04-install-packages.sh

@@ -81,7 +81,7 @@ installPackages+=(nss-devel)
 installPackages+=(python3-html5lib)
 installPackages+=(mesa-libgbm-devel)
 # For Android builds
-installPackages+=(java-21-openjdk-devel)
+installPackages+=(java-11-openjdk-devel)
 # For receiving shasum
 installPackages+=(perl-Digest-SHA)
 # INTEGRITY requirements

coin/provisioning/qtci-linux-RHEL-8.6-x86_64/01-refresh-subscription-manager.sh

@@ -5,11 +5,14 @@
 
 set -e
 
-curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions_rhc.sh -o "/tmp/redhat_ak.sh" &>/dev/null
+curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions.sh -o "/tmp/redhat_ak.sh" &>/dev/null
 sudo chmod 755 /tmp/redhat_ak.sh
-sudo /tmp/redhat_ak.sh
+/tmp/redhat_ak.sh
 
 # refresh local certificates
 sudo subscription-manager refresh
 
+# Attach available subscriptions to system. This is needed when subscriptions are renewed.
+sudo subscription-manager attach --auto
+
 sudo rm -f /tmp/redhat_ak.sh

coin/provisioning/qtci-linux-RHEL-8.6-x86_64/04-install-packages.sh

@@ -90,7 +90,7 @@ installPackages+=(nspr-devel)
 installPackages+=(nss-devel)
 installPackages+=(python3-html5lib)
 # For Android builds
-installPackages+=(java-21-openjdk-devel)
+installPackages+=(java-11-openjdk-devel-11.0.19.0.7)
 # For receiving shasum
 installPackages+=(perl-Digest-SHA)
 # INTEGRITY requirements

coin/provisioning/qtci-linux-RHEL-8.8-x86_64/01-refresh-subscription-manager.sh

@@ -5,11 +5,14 @@
 
 set -e
 
-curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions_rhc.sh -o "/tmp/redhat_ak.sh" &>/dev/null
+curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions.sh -o "/tmp/redhat_ak.sh" &>/dev/null
 sudo chmod 755 /tmp/redhat_ak.sh
-sudo /tmp/redhat_ak.sh
+/tmp/redhat_ak.sh
 
 # refresh local certificates
 sudo subscription-manager refresh
 
+# Attach available subscriptions to system. This is needed when subscriptions are renewed.
+sudo subscription-manager attach --auto
+
 sudo rm -f /tmp/redhat_ak.sh

coin/provisioning/qtci-linux-RHEL-8.8-x86_64/03-enable-repos.sh

@@ -14,7 +14,7 @@ while sudo fuser /usr/libexec/packagekitd >/dev/null 2>&1; do
 done
 sudo yum -y remove PackageKit gnome-software
 
-sudo subscription-manager config --rhsm.manage_repos=1
+sudo subscription-manager config --rhsm.manage_repos=0
 sudo subscription-manager refresh
 
 # List available RHEL versions and bind with correct one
@@ -22,10 +22,35 @@ sudo subscription-manager release --list
 sudo subscription-manager release --set=8.8
 sudo yum clean all
 
-# sudo yum config-manager --enable 'rhceph-4-tools-for-rhel-8-x86_64-rpms'
-sudo yum config-manager --enable 'codeready-builder-for-rhel-8-x86_64-rpms'
-sudo yum config-manager --enable 'rhel-8-for-x86_64-baseos-rpms'
-sudo yum config-manager --enable 'rhel-8-for-x86_64-appstream-rpms'
+sudo tee "/etc/yum.repos.d/local.repo" > /dev/null <<EOC
+[rhel-8-for-x86_64-baseos-rpms]
+metadata_expire = 86400
+baseurl = http://repo-clones.ci.qt.io/repos/rhel-8-for-x86_64-baseos-rpms
+ui_repoid_vars = releasever basearch
+name = Qt Red Hat Enterprise Linux 8 Base OS (RPMs)
+gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
+enabled = 1
+gpgcheck = 1
+
+[rhel-8-for-x86_64-appstream-rpms]
+metadata_expire = 86400
+baseurl = http://repo-clones.ci.qt.io/repos/rhel-8-for-x86_64-appstream-rpms
+ui_repoid_vars = releasever basearch
+name = Qt Red Hat Enterprise Linux 8 Appstream (RPMs)
+gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
+enabled = 1
+gpgcheck = 1
+
+[codeready-builder-for-rhel-8-x86_64-rpms]
+metadata_expire = 86400
+baseurl = http://repo-clones.ci.qt.io/repos/codeready-builder-for-rhel-8-x86_64-rpms
+ui_repoid_vars = releasever basearch
+name = Qt Red Hat Enterprise Linux Codeready Builder (RPMs)
+gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
+enabled = 1
+gpgcheck = 1
+EOC
+
 # Epel is required for 'double-conversion-devel', 'libsqlite3x' and 'p7zip'
 sudo dnf install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
 

coin/provisioning/qtci-linux-RHEL-8.8-x86_64/04-install-packages.sh

@@ -17,6 +17,8 @@ installPackages+=(ca-certificates)
 installPackages+=(git)
 installPackages+=(zlib-devel)
 installPackages+=(glib2-devel)
+installPackages+=(openssl3)
+installPackages+=(openssl3-devel)
 installPackages+=(freetype-devel)
 installPackages+=(fontconfig-devel)
 installPackages+=(curl-devel)
@@ -91,7 +93,7 @@ installPackages+=(python3-html5lib)
 installPackages+=(libatomic)
 installPackages+=(mesa-libgbm-devel-21.3.4-1.el8.x86_64)
 # For Android builds
-installPackages+=(java-21-openjdk-devel-21.0.9.0.10-1.el9)
+installPackages+=(java-17-openjdk-devel-17.0.9.0.9)
 # For receiving shasum
 installPackages+=(perl-Digest-SHA)
 # INTEGRITY requirements
@@ -182,5 +184,8 @@ echo "GCC = $gccVersion" >> versions.txt
 glibcVersion="$(ldd --version |grep -Eo '[0-9]+\.[0-9]+(\.[0-9]+)?' |head -n 1)"
 echo "glibc = $glibcVersion" >> versions.txt
 
+OpenSSLVersion="$(openssl3 version |cut -b 9-14)"
+echo "System's OpenSSL = $OpenSSLVersion" >> ~/versions.txt
+
 # List all available updates
 sudo yum -y list updates

coin/provisioning/qtci-linux-RHEL-9.0-x86_64/01-refresh-subscription-manager.sh

@@ -5,11 +5,14 @@
 
 set -e
 
-curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions_rhc.sh -o "/tmp/redhat_ak.sh" &>/dev/null
+curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions.sh -o "/tmp/redhat_ak.sh" &>/dev/null
 sudo chmod 755 /tmp/redhat_ak.sh
-sudo /tmp/redhat_ak.sh
+/tmp/redhat_ak.sh
 
 # refresh local certificates
 sudo subscription-manager refresh
 
+# Attach available subscriptions to system. This is needed when subscriptions are renewed.
+sudo subscription-manager attach --auto
+
 sudo rm -f /tmp/redhat_ak.sh

coin/provisioning/qtci-linux-RHEL-9.0-x86_64/03-enable-repos.sh

@@ -1,5 +1,5 @@
 #!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
+# Copyright (C) 2022 The Qt Company Ltd.
 # SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
 
 set -ex
@@ -13,7 +13,7 @@ while sudo fuser /usr/libexec/packagekitd >/dev/null 2>&1; do
 done
 sudo yum -y remove PackageKit gnome-software
 
-sudo subscription-manager config --rhsm.manage_repos=0
+sudo subscription-manager config --rhsm.manage_repos=1
 sudo subscription-manager refresh
 
 # List available RHEL versions and bind with correct one
@@ -21,35 +21,10 @@ sudo subscription-manager release --list
 sudo subscription-manager release --set=9.0
 sudo yum clean all
 
-sudo tee "/etc/yum.repos.d/local.repo" > /dev/null <<EOC
-[rhel-9-for-x86_64-baseos-rpms]
-metadata_expire = 86400
-baseurl = http://repo-clones-rhel9.ci.qt.io/rhel-9-for-x86_64-baseos-rpms
-ui_repoid_vars = releasever basearch
-name = Qt Red Hat Enterprise Linux 9 Base OS (RPMs)
-gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
-enabled = 1
-gpgcheck = 1
-
-[rhel-9-for-x86_64-appstream-rpms]
-metadata_expire = 86400
-baseurl = http://repo-clones-rhel9.ci.qt.io/rhel-9-for-x86_64-appstream-rpms
-ui_repoid_vars = releasever basearch
-name = Qt Red Hat Enterprise Linux 9 Appstream (RPMs)
-gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
-enabled = 1
-gpgcheck = 1
-
-[codeready-builder-for-rhel-9-x86_64-rpms]
-metadata_expire = 86400
-baseurl = http://repo-clones-rhel9.ci.qt.io/codeready-builder-for-rhel-9-x86_64-rpms
-ui_repoid_vars = releasever basearch
-name = Qt Red Hat Enterprise Linux Codeready Builder (RPMs)
-gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
-enabled = 1
-gpgcheck = 1
-EOC
-
+# sudo yum config-manager --enable 'rhceph-4-tools-for-rhel-8-x86_64-rpms'
+sudo yum config-manager --enable 'codeready-builder-for-rhel-9-x86_64-rpms'
+sudo yum config-manager --enable 'rhel-9-for-x86_64-baseos-rpms'
+sudo yum config-manager --enable 'rhel-9-for-x86_64-appstream-rpms'
 # Epel is required for 'double-conversion-devel', 'libsqlite3x' and 'p7zip'
 sudo dnf install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-9.noarch.rpm
 

coin/provisioning/qtci-linux-RHEL-9.0-x86_64/04-install-packages.sh

@@ -83,7 +83,7 @@ installPackages+=(python3-html5lib)
 installPackages+=(mesa-libgbm-devel-21.3.4-2.el9)
 installPackages+=(libstdc++-static)
 # For Android builds
-installPackages+=(java-21-openjdk-devel-21.0.9.0.10-1.el9)
+installPackages+=(java-17-openjdk-devel-17.0.9.0.9)
 # For receiving shasum
 installPackages+=(perl-Digest-SHA)
 # INTEGRITY requirements

coin/provisioning/qtci-linux-RHEL-9.2-x86_64/01-refresh-subscription-manager.sh

@@ -5,11 +5,14 @@
 
 set -e
 
-curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions_rhc.sh -o "/tmp/redhat_ak.sh" &>/dev/null
+curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions.sh -o "/tmp/redhat_ak.sh" &>/dev/null
 sudo chmod 755 /tmp/redhat_ak.sh
-sudo /tmp/redhat_ak.sh
+/tmp/redhat_ak.sh
 
 # refresh local certificates
 sudo subscription-manager refresh
 
+# Attach available subscriptions to system. This is needed when subscriptions are renewed.
+sudo subscription-manager attach --auto
+
 sudo rm -f /tmp/redhat_ak.sh

coin/provisioning/qtci-linux-RHEL-9.2-x86_64/03-enable-repos.sh

@@ -1,5 +1,5 @@
 #!/usr/bin/env bash
-# Copyright (C) 2026 The Qt Company Ltd.
+# Copyright (C) 2023 The Qt Company Ltd.
 # SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
 
 set -ex
@@ -14,7 +14,7 @@ while sudo fuser /usr/libexec/packagekitd >/dev/null 2>&1; do
 done
 sudo yum -y remove PackageKit gnome-software
 
-sudo subscription-manager config --rhsm.manage_repos=0
+sudo subscription-manager config --rhsm.manage_repos=1
 sudo subscription-manager refresh
 
 # List available RHEL versions and bind with correct one
@@ -22,35 +22,10 @@ sudo subscription-manager release --list
 sudo subscription-manager release --set=9.2
 sudo yum clean all
 
-sudo tee "/etc/yum.repos.d/local.repo" > /dev/null <<EOC
-[rhel-9-for-x86_64-baseos-rpms]
-metadata_expire = 86400
-baseurl = http://repo-clones-rhel9.ci.qt.io/rhel-9-for-x86_64-baseos-rpms
-ui_repoid_vars = releasever basearch
-name = Qt Red Hat Enterprise Linux 9 Base OS (RPMs)
-gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
-enabled = 1
-gpgcheck = 1
-
-[rhel-9-for-x86_64-appstream-rpms]
-metadata_expire = 86400
-baseurl = http://repo-clones-rhel9.ci.qt.io/rhel-9-for-x86_64-appstream-rpms
-ui_repoid_vars = releasever basearch
-name = Qt Red Hat Enterprise Linux 9 Appstream (RPMs)
-gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
-enabled = 1
-gpgcheck = 1
-
-[codeready-builder-for-rhel-9-x86_64-rpms]
-metadata_expire = 86400
-baseurl = http://repo-clones-rhel9.ci.qt.io/codeready-builder-for-rhel-9-x86_64-rpms
-ui_repoid_vars = releasever basearch
-name = Qt Red Hat Enterprise Linux Codeready Builder (RPMs)
-gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
-enabled = 1
-gpgcheck = 1
-EOC
-
+# sudo yum config-manager --enable 'rhceph-4-tools-for-rhel-8-x86_64-rpms'
+sudo yum config-manager --enable 'codeready-builder-for-rhel-9-x86_64-rpms'
+sudo yum config-manager --enable 'rhel-9-for-x86_64-baseos-rpms'
+sudo yum config-manager --enable 'rhel-9-for-x86_64-appstream-rpms'
 # Epel is required for 'double-conversion-devel', 'libsqlite3x' and 'p7zip'
 sudo dnf install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-9.noarch.rpm
 

coin/provisioning/qtci-linux-RHEL-9.2-x86_64/04-install-packages.sh

@@ -100,7 +100,7 @@ installPackages+=(python3-html5lib)
 installPackages+=(libstdc++-static)
 installPackages+=(mesa-libgbm-devel-21.3.4-2.el9.x86_64)
 # For Android builds
-installPackages+=(java-21-openjdk-devel-21.0.9.0.10-1.el9)
+installPackages+=(java-17-openjdk-devel-17.0.9.0.9)
 # For receiving shasum
 installPackages+=(perl-Digest-SHA)
 # INTEGRITY requirements

coin/provisioning/qtci-linux-RHEL-9.4-x86_64/01-refresh-subscription-manager.sh

@@ -5,11 +5,14 @@
 
 set -e
 
-curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions_rhc.sh -o "/tmp/redhat_ak.sh" &>/dev/null
+curl --retry 5 --retry-delay 10 --retry-max-time 60 http://ci-files01-hki.ci.qt.io/input/semisecure/redhat_ak_all_versions.sh -o "/tmp/redhat_ak.sh" &>/dev/null
 sudo chmod 755 /tmp/redhat_ak.sh
-sudo /tmp/redhat_ak.sh
+/tmp/redhat_ak.sh
 
 # refresh local certificates
 sudo subscription-manager refresh
 
+# Attach available subscriptions to system. This is needed when subscriptions are renewed.
+sudo subscription-manager attach --auto
+
 sudo rm -f /tmp/redhat_ak.sh