Update submodules on '6.4.0 in qt/qt5'

Change-Id: I4fcf089726ed09044c4045cefc5f73f068ae28d5
Reviewed-by: Qt Submodule Update Bot <qt_submodule_update_bot@qt-project.org>

.gitmodules

@@ -1,40 +1,40 @@
 [submodule "qtbase"]
 	path = qtbase
 	url = ../qtbase.git
-	branch = 6.4
+	branch = 6.4.0
 	status = essential
 [submodule "qtsvg"]
 	depends = qtbase
 	path = qtsvg
 	url = ../qtsvg.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtdeclarative"]
 	depends = qtbase
 	recommends = qtimageformats qtshadertools qtsvg qtlanguageserver
 	path = qtdeclarative
 	url = ../qtdeclarative.git
-	branch = 6.4
+	branch = 6.4.0
 	status = essential
 [submodule "qtactiveqt"]
 	depends = qtbase
 	path = qtactiveqt
 	url = ../qtactiveqt.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtmultimedia"]
 	depends = qtbase qtshadertools
-	recommends = qtdeclarative qtquick3d
+	recommends = qtdeclarative
 	path = qtmultimedia
 	url = ../qtmultimedia.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qttools"]
 	depends = qtbase
 	recommends = qtdeclarative qtactiveqt
 	path = qttools
 	url = ../qttools.git
-	branch = 6.4
+	branch = 6.4.0
 	status = essential
 [submodule "qtxmlpatterns"]
 	depends = qtbase
@@ -47,7 +47,7 @@
 	depends = qttools
 	path = qttranslations
 	url = ../qttranslations.git
-	branch = 6.4
+	branch = 6.4.0
 	status = essential
 	priority = 30
 [submodule "qtdoc"]
@@ -55,7 +55,7 @@
 	recommends = qtmultimedia
 	path = qtdoc
 	url = ../qtdoc.git
-	branch = 6.4
+	branch = 6.4.0
 	status = essential
 	priority = 40
 [submodule "qtrepotools"]
@@ -83,14 +83,14 @@
 	recommends = qtdeclarative qtserialport
 	path = qtpositioning
 	url = ../qtpositioning.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtsensors"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtsensors
 	url = ../qtsensors.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtsystems"]
 	depends = qtbase
@@ -117,61 +117,61 @@
 	recommends = qtdeclarative
 	path = qtconnectivity
 	url = ../qtconnectivity.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtwayland"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtwayland
 	url = ../qtwayland.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qt3d"]
 	depends = qtbase
 	recommends = qtdeclarative qtshadertools
 	path = qt3d
 	url = ../qt3d.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtimageformats"]
 	depends = qtbase
 	path = qtimageformats
 	url = ../qtimageformats.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtserialbus"]
 	depends = qtbase
 	recommends = qtserialport
 	path = qtserialbus
 	url = ../qtserialbus.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtserialport"]
 	depends = qtbase
 	path = qtserialport
 	url = ../qtserialport.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtwebsockets"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtwebsockets
 	url = ../qtwebsockets.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtwebchannel"]
 	depends = qtbase
 	recommends = qtdeclarative qtwebsockets
 	path = qtwebchannel
 	url = ../qtwebchannel.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtwebengine"]
 	depends = qtdeclarative
 	recommends = qtwebchannel qttools qtpositioning
 	path = qtwebengine
 	url = ../qtwebengine.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 	priority = 10
 [submodule "qtcanvas3d"]
@@ -185,28 +185,28 @@
 	recommends = qtwebengine
 	path = qtwebview
 	url = ../qtwebview.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtcharts"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtcharts
 	url = ../qtcharts.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtdatavis3d"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtdatavis3d
 	url = ../qtdatavis3d.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtvirtualkeyboard"]
 	depends = qtbase qtdeclarative qtsvg
 	recommends = qtmultimedia
 	path = qtvirtualkeyboard
 	url = ../qtvirtualkeyboard.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtgamepad"]
 	depends = qtbase
@@ -219,27 +219,27 @@
 	depends = qtbase qtdeclarative
 	path = qtscxml
 	url = ../qtscxml.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtspeech"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtspeech
 	url = ../qtspeech.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtnetworkauth"]
 	depends = qtbase
 	path = qtnetworkauth
 	url = ../qtnetworkauth.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtremoteobjects"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtremoteobjects
 	url = ../qtremoteobjects.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtwebglplugin"]
 	depends = qtbase qtwebsockets
@@ -252,68 +252,68 @@
 	depends = qtbase qtdeclarative
 	path = qtlottie
 	url = ../qtlottie.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtquicktimeline"]
 	depends = qtbase qtdeclarative
 	path = qtquicktimeline
 	url = ../qtquicktimeline
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtquick3d"]
 	depends = qtbase qtdeclarative qtshadertools
 	recommends = qtquicktimeline
 	path = qtquick3d
 	url = ../qtquick3d.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtshadertools"]
 	depends = qtbase
 	path = qtshadertools
 	url = ../qtshadertools.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qt5compat"]
 	depends = qtbase qtdeclarative
 	path = qt5compat
 	url = ../qt5compat.git
-	branch = 6.4
+	branch = 6.4.0
 	status = deprecated
 [submodule "qtcoap"]
 	depends = qtbase
 	path = qtcoap
 	url = ../qtcoap.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtmqtt"]
 	depends = qtbase qtdeclarative
 	path = qtmqtt
 	url = ../qtmqtt.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtopcua"]
 	depends = qtbase qtdeclarative
 	path = qtopcua
 	url = ../qtopcua.git
-	branch = 6.4
+	branch = 6.4.0
 	status = addon
 [submodule "qtlanguageserver"]
 	depends = qtbase
 	path = qtlanguageserver
 	url = ../qtlanguageserver.git
-	branch = 6.4
+	branch = 6.4.0
 	status = preview
 [submodule "qthttpserver"]
 	depends = qtbase
 	recommends = qtwebsockets
 	path = qthttpserver
 	url = ../qthttpserver.git
-	branch = 6.4
+	branch = 6.4.0
 	status = preview
 [submodule "qtquick3dphysics"]
 	depends = qtbase qtdeclarative qtquick3d qtshadertools
 	path = qtquick3dphysics
 	url = ../qtquick3dphysics.git
-	branch = 6.4
+	branch = 6.4.0
 	status = preview
 

coin/instructions/coin_bic_tests.yaml

@@ -1,32 +0,0 @@
-type: Group
-instructions:
-  - type: EnvironmentVariable
-    variableName: QT_MODULE_TO_TEST
-    variableValue: "qt=QtConcurrent,QtCore,QtDBus,QtDesigner,QtGui,QtHelp,QtNetwork,QtOpenGL,QtPrintSupport,QtQml,QtQuick,QtQuickTest,QtSql,QtSvg,QtTest,QtWidgets,QtXml;{{.SourceDir}}/qtbase"
-  - type: EnvironmentVariable
-    variableName: QTDIR
-    variableValue: "{{.InstallDir}}"
-  - type: PrependToEnvironmentVariable
-    variableName: PATH
-    variableValue: "{{.InstallDir}}/bin:"
-  - type: ChangeDirectory
-    directory: "{{.SourceDir}}/qtqa/tests/postbuild/bic"
-  - type: ExecuteCommand
-    command: ["{{.InstallDir}}/bin/qmake"]
-    maxTimeInSeconds: 3600
-    maxTimeBetweenOutput: 300
-    userMessageOnFailure: "Failed to execute qmake for bic tests"
-  - type: ExecuteCommand
-    command: ["make", "check", "-j1"]
-    maxTimeInSeconds: 7200
-    maxTimeBetweenOutput: 300
-    userMessageOnFailure: "Failed to execute bic tests"
-enable_if:
-  condition: and
-  conditions:
-    - condition: property
-      property: features
-      contains_value: Packaging
-    - condition: property
-      property: target.os
-      equals_value: Linux

coin/module_config.yaml

@@ -9,4 +9,6 @@ instructions:
     - !include "{{qt/qt5}}/coin_qt_build_template.yaml"
 
   Test:
-    - !include "{{qt/qt5}}/coin_bic_tests.yaml"
+    - type: EnvironmentVariable
+      variableName: Dummy
+      variableValue: dummy

coin/platform_configs/cmake_platforms.yaml

@@ -2,31 +2,30 @@ Version: 2
 Include: [
     cmake_platforms_qemu.yaml,
     cmake_platforms_qemu_qnx710.yaml,
-    cmake_platforms_target_android.yaml,
+    cmake_platforms_target_android_host_linux.yaml,
+    cmake_platforms_target_android_host_macos.yaml,
+    cmake_platforms_target_android_host_windows.yaml,
     cmake_platforms_wasm.yaml,
     macos.yaml
     ]
 Configurations:
 -
-    Id: 'ubuntu-20.04-documentation'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-50'
     Compiler: 'GCC'
     Features: ['Sccache', 'Documentation', 'TestDocs', 'UseConfigure']
     Configure arguments: '-make examples -developer-build -c++std c++20 -linker gold -no-warnings-are-errors -qtlibinfix TestInfix -qtnamespace TestNamespace'
-    Environment variables: ['NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR}}']
 -
-    Id: 'ubuntu-20.04'
+    Id: 'Ubuntu-20.04-host'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-50'
     Compiler: 'GCC'
     Features: ['Sccache', 'UseConfigure']
     Configure arguments: '-nomake examples -release -force-debug-info -separate-debug-info -headersclean -qt-libjpeg -qt-libpng -qt-pcre -qt-harfbuzz -qt-doubleconversion -no-libudev -bundled-xcb-xinput'
     Environment variables: [
-        'CMAKE_ARGS=-DOpenGL_GL_PREFERENCE=LEGACY',
-        'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR}}'
+        'CMAKE_ARGS=-DOpenGL_GL_PREFERENCE=LEGACY'
     ]
 -
-    Id: 'opensuse-15.4-developer-build'
-    Template: 'qtci-linux-openSUSE-15.4-x86_64-50'
+    Id: 'OpenSUSE-15.3-host'
+    Template: 'qtci-linux-openSUSE-15.3-x86_64-50'
     Compiler: 'GCC'
     Features: ['Sccache', 'WarningsAreErrors', 'UseConfigure']
     Configure arguments: '-nomake examples -developer-build'
@@ -35,8 +34,7 @@ Configurations:
         'CONAN_PROFILE=coin/conan/profiles/ci-linux-x86_64-gcc-debug-developer'
     ]
 -
-    Id: 'sles-15_sp4-static'
-    Template: 'qtci-linux-SLES-15_SP4-x86_64-50'
+    Template: 'qtci-linux-SLES-15_SP3-x86_64-51'
     Compiler: 'GCC'
     Features: ['Sccache', 'DisableTests', 'UseConfigure']
     Configure arguments: '-nomake examples -static -no-sql-mysql'
@@ -44,66 +42,56 @@ Configurations:
         'CMAKE_ARGS=-DOPENSSL_ROOT_DIR={{.Env.OPENSSL_HOME}}'
     ]
 -
-    Id: 'windows-10_22h2-msvc2019'
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'MSVC2019'
     Features: ['Packaging', 'Sccache', "DebugAndRelease", 'UseConfigure']
     Configure arguments: '-debug-and-release -force-debug-info -headersclean -nomake examples -qt-zlib'
     Environment variables: [
         'CMAKE_ARGS=-DFEATURE_msvc_obj_debug_info=ON -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_INCLUDE_x64}}\.. -DPostgreSQL_ROOT={{.Env.POSTGRESQL_LIB_x64}}\..',
         'LLVM_INSTALL_DIR={{.Env.LLVM_INSTALL_DIR_msvc}}',
-        'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR_MSVC}}',
         'CONAN_PROFILE=coin/conan/profiles/ci-windows-x86_64-msvc2019_64']
 -
-    Id: 'windows-11_22h2-msvc2019'
-    Template: 'qtci-windows-11_22H2-x86_64-50'
+    Template: 'qtci-windows-11_21H2-x86_64-52'
     Compiler: 'MSVC2019'
     Features: ['Packaging', 'Sccache', "DebugAndRelease", 'UseConfigure']
     Configure arguments: '-debug-and-release -force-debug-info -headersclean -nomake examples -qt-zlib'
     Environment variables: [
         'CMAKE_ARGS=-DFEATURE_msvc_obj_debug_info=ON -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_INCLUDE_x64}}\.. -DPostgreSQL_ROOT={{.Env.POSTGRESQL_LIB_x64}}\..',
-        'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR_MSVC}}',
         'LLVM_INSTALL_DIR={{.Env.LLVM_INSTALL_DIR_msvc}}']
 -
-    Id: 'windows-10_22h2-msvc2022'
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'MSVC2022'
     Features: ['Sccache', "DebugAndRelease", 'UseConfigure']
     Configure arguments: '-debug-and-release -force-debug-info -headersclean -nomake examples -qt-zlib'
     Environment variables: [
         'CMAKE_ARGS=-DFEATURE_msvc_obj_debug_info=ON -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_INCLUDE_x64}}\.. -DPostgreSQL_ROOT={{.Env.POSTGRESQL_LIB_x64}}\..',
-        'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR_MSVC}}',
         'LLVM_INSTALL_DIR={{.Env.LLVM_INSTALL_DIR_msvc}}'
     ]
 -
-    Id: 'windows-11_22h2-msvc2022'
-    Template: 'qtci-windows-11_22H2-x86_64-50'
+    Template: 'qtci-windows-11_21H2-x86_64-52'
     Compiler: 'MSVC2022'
     Features: ['Sccache', "DebugAndRelease", 'UseConfigure']
     Configure arguments: '-debug-and-release -force-debug-info -headersclean -nomake examples -qt-zlib'
     Environment variables: [
         'CMAKE_ARGS=-DFEATURE_msvc_obj_debug_info=ON -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_INCLUDE_x64}}\.. -DPostgreSQL_ROOT={{.Env.POSTGRESQL_LIB_x64}}\..',
-        'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR_MSVC}}',
         'LLVM_INSTALL_DIR={{.Env.LLVM_INSTALL_DIR_msvc}}'
     ]
 -
-    Id: 'windows-10_22h2-msvc2019-developer-build'
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Id: 'Windows10_21H2-MSVC2019-x64-host'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'MSVC2019'
     Features: ['Sccache', 'Conan', "DebugAndRelease", 'WarningsAreErrors', 'UseConfigure']
     Configure arguments: '-debug-and-release -make examples -developer-build -force-debug-info -qt-zlib'
     Environment variables: [
         'CMAKE_ARGS=-DFEATURE_msvc_obj_debug_info=ON -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_INCLUDE_x64}}\..',
-        'CONAN_PROFILE=coin/conan/profiles/ci-windows-x86_64-msvc2019_64-developer',
-        'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR_MSVC}}'
+        'CONAN_PROFILE=coin/conan/profiles/ci-windows-x86_64-msvc2019_64-developer'
     ]
 -
-    Id: 'windows-10_22h2-msvc2019-arm64'
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'MSVC2019'
     Target arch: 'arm64'
     Features: ['Sccache', 'DisableTests', 'TargetBuildOnly', 'Packaging', 'UseConfigure']
-    Platform dependency: 'windows-10_22h2-msvc2019-developer-build'
+    Platform dependency: 'Windows10_21H2-MSVC2019-x64-host'
     Environment variables: [
         'TARGET_CONFIGURE_ARGS=-debug-and-release -force-debug-info -platform win32-arm64-msvc',
         'TARGET_CMAKE_ARGS=-DFEATURE_msvc_obj_debug_info=ON -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ROOT_DIR_x64_arm64}}',
@@ -114,22 +102,20 @@ Configurations:
         'OPENSSL_LIB_x64={{.Env.OPENSSL_LIB_x64_arm64}}'
     ]
 -
-    Id: 'windows-11_22h2-msvc2019-developer-build'
-    Template: 'qtci-windows-11_22H2-x86_64-50'
+    Id: 'Windows11_21H2-MSVC2019-x64-host'
+    Template: 'qtci-windows-11_21H2-x86_64-52'
     Compiler: 'MSVC2019'
     Features: ['Sccache', "DebugAndRelease", 'WarningsAreErrors', 'UseConfigure']
     Configure arguments: '-debug-and-release -make examples -developer-build -force-debug-info -qt-zlib'
     Environment variables: [
-        'CMAKE_ARGS=-DFEATURE_msvc_obj_debug_info=ON -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_INCLUDE_x64}}\..',
-        'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR_MSVC}}'
+        'CMAKE_ARGS=-DFEATURE_msvc_obj_debug_info=ON -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_INCLUDE_x64}}\..'
     ]
 -
-    Id: 'windows-11_22h2-msvc2019-arm64'
-    Template: 'qtci-windows-11_22H2-x86_64-50'
+    Template: 'qtci-windows-11_21H2-x86_64-52'
     Compiler: 'MSVC2019'
     Target arch: 'arm64'
     Features: ['Sccache', 'DisableTests', 'TargetBuildOnly', 'Packaging', 'UseConfigure']
-    Platform dependency: 'windows-11_22h2-msvc2019-developer-build'
+    Platform dependency: 'Windows11_21H2-MSVC2019-x64-host'
     Environment variables: [
         'TARGET_CONFIGURE_ARGS=-debug-and-release -force-debug-info -platform win32-arm64-msvc',
         'TARGET_CMAKE_ARGS=-DFEATURE_msvc_obj_debug_info=ON',
@@ -137,24 +123,23 @@ Configurations:
         'CONAN_PROFILE=coin/conan/profiles/ci-windows-arm64-msvc2019_64'
     ]
 -
-    Id: 'rhel-8.4'
+    Id: 'RHEL-8.4-host'
     Template: 'qtci-linux-RHEL-8.4-x86_64-50'
     Compiler: 'GCC'
-    Features: ['Packaging', 'Sccache', 'UseConfigure', 'InstallQt5Dependencies']
+    Features: ['Packaging', 'Sccache', 'UseConfigure']
     Configure arguments: '-nomake examples -release -force-debug-info -headersclean -separate-debug-info -qt-libjpeg -qt-libpng -qt-pcre -qt-harfbuzz -qt-doubleconversion -no-libudev -bundled-xcb-xinput'
     Environment variables: [
         'CMAKE_ARGS=-DOpenGL_GL_PREFERENCE=LEGACY',
-        'CONAN_PROFILE=coin/conan/profiles/ci-linux-x86_64-gcc',
-        'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR}}'
+        'CONAN_PROFILE=coin/conan/profiles/ci-linux-x86_64-gcc'
     ]
 -
     Id: 'ios-universal'
-    Template: 'qtci-macos-12-x86_64-105'
+    Template: 'qtci-macos-12-x86_64-102'
     Target os: 'IOS_ANY'
     Target arch: 'arm64'
     Compiler: 'Clang'
     Target compiler: 'Clang'
-    Platform dependency: 'macos-universal-on-x86_64'
+    Platform dependency: 'macos-latest-xcode-universal-packaging-build'
     Features: ['Packaging', 'Sccache', 'DebugAndRelease', 'DisableTests', 'UseConfigure']
     Environment variables: [
         'TARGET_CONFIGURE_ARGS=-debug-and-release -nomake examples -platform macx-ios-clang',
@@ -162,63 +147,61 @@ Configurations:
         'CONAN_PROFILE=coin/conan/profiles/ci-macos-ios-arm64-clang'
     ]
 -
-    Id: 'windows-10_22h2-mingw11'
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Id: 'Windows10_21H2-Mingw11-x64-host'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'Mingw'
     Features: ['Packaging', 'Sccache', 'UseConfigure']
     Configure arguments: '-release -force-debug-info -separate-debug-info -nomake examples -qt-zlib -qt-freetype -qt-libjpeg'
     Environment variables: [
         'Path={{.Env.MINGW1120}}\bin;{{.Env.Path}}',
         'CMAKE_ARGS=-DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_INCLUDE_x64}}\.. -DPostgreSQL_ROOT={{.Env.POSTGRESQL_LIB_x64}}\..',
-        'NON_QTBASE_CMAKE_ARGS=-DFEATURE_system_tiff=OFF -DFFMPEG_DIR={{.Env.FFMPEG_DIR_MINGW}}',
+        'NON_QTBASE_CMAKE_ARGS=-DFEATURE_system_tiff=OFF',
         'LLVM_INSTALL_DIR={{.Env.LLVM_INSTALL_DIR_mingw}}',
         'CONAN_PROFILE=coin/conan/profiles/ci-windows-x86_64-mingw'
     ]
 -
-    Id: 'windows-10_22h2-llvm'
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Id: 'Windows10_21H2-LLVM-x64-host'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'Clang'
     Features: ['Sccache', 'UseConfigure']
     Configure arguments: '-release -force-debug-info -separate-debug-info -nomake examples -qt-zlib -qt-freetype -qt-libjpeg'
     Environment variables: [
         'Path=C:\llvm-mingw\bin;{{.Env.Path}}',
         'CMAKE_ARGS=-DOPENSSL_ROOT_DIR={{.Env.OPENSSL_INCLUDE_x64}}\.. -DPostgreSQL_ROOT={{.Env.POSTGRESQL_LIB_x64}}\..',
-        'NON_QTBASE_CMAKE_ARGS=-DFEATURE_system_tiff=OFF -DFFMPEG_DIR={{.Env.FFMPEG_DIR_LLVM_MINGW}}',
+        'NON_QTBASE_CMAKE_ARGS=-DFEATURE_system_tiff=OFF',
         'LLVM_INSTALL_DIR=C:\llvm-mingw'
     ]
 -
-    Id: 'windows-11_22h2-llvm'
-    Template: 'qtci-windows-11_22H2-x86_64-50'
+    Id: 'Windows11_21H2-LLVM-x64-host'
+    Template: 'qtci-windows-11_21H2-x86_64-52'
     Compiler: 'Clang'
     Features: ['Sccache', 'UseConfigure']
     Configure arguments: '-release -force-debug-info -separate-debug-info -nomake examples -qt-zlib -qt-freetype -qt-libjpeg'
     Environment variables: [
         'Path=C:\llvm-mingw\bin;{{.Env.Path}}',
         'CMAKE_ARGS=-DOPENSSL_ROOT_DIR={{.Env.OPENSSL_INCLUDE_x64}}\.. -DPostgreSQL_ROOT={{.Env.POSTGRESQL_LIB_x64}}\..',
-        'NON_QTBASE_CMAKE_ARGS=-DFEATURE_system_tiff=OFF -DFFMPEG_DIR={{.Env.FFMPEG_DIR_LLVM_MINGW}}',
+        'NON_QTBASE_CMAKE_ARGS=-DFEATURE_system_tiff=OFF',
         'LLVM_INSTALL_DIR=C:\llvm-mingw'
     ]
 -
-    Id: 'windows-10_22h2-mingw11-developer-build'
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'Mingw'
     Features: ['Sccache', 'WarningsAreErrors', 'UseConfigure']
     Configure arguments: '-developer-build -release -force-debug-info -separate-debug-info -make examples -qt-zlib -qt-freetype -qt-libjpeg'
     Environment variables: [
         'Path={{.Env.MINGW1120}}\bin;{{.Env.Path}}',
         'CMAKE_ARGS=-DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_INCLUDE_x64}}\..',
-        'NON_QTBASE_CMAKE_ARGS=-DFEATURE_system_tiff=OFF -DFFMPEG_DIR={{.Env.FFMPEG_DIR_MINGW}}',
+        'NON_QTBASE_CMAKE_ARGS=-DFEATURE_system_tiff=OFF',
         'LLVM_INSTALL_DIR={{.Env.LLVM_INSTALL_DIR_mingw}}'
     ]
 -
-    Id: 'windows-11_22h2-mingw11-developer-build'
-    Template: 'qtci-windows-11_22H2-x86_64-50'
+    Template: 'qtci-windows-11_21H2-x86_64-52'
     Compiler: 'Mingw'
     Features: ['Sccache', 'WarningsAreErrors', 'UseConfigure']
     Configure arguments: '-developer-build -release -force-debug-info -separate-debug-info -make examples -qt-zlib -qt-freetype -qt-libjpeg'
     Environment variables: [
         'Path={{.Env.MINGW1120}}\bin;{{.Env.Path}}',
         'CMAKE_ARGS=-DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_INCLUDE_x64}}\..',
-        'NON_QTBASE_CMAKE_ARGS=-DFEATURE_system_tiff=OFF -DFFMPEG_DIR={{.Env.FFMPEG_DIR_MINGW}}',
+        'NON_QTBASE_CMAKE_ARGS=-DFEATURE_system_tiff=OFF',
         'LLVM_INSTALL_DIR={{.Env.LLVM_INSTALL_DIR_mingw}}'
     ]

coin/platform_configs/cmake_platforms_qemu.yaml

@@ -1,52 +1,50 @@
 Version: 2
 Configurations:
 -
-    Id: 'qemu-armv7-developer-build'
+    Id: 'qemu-armv7-on-ubuntu20.04'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-50'
     Target os: 'QEMU'
     Target arch: 'armv7'
     Compiler: 'GCC'
-    Platform dependency: 'ubuntu-20.04'
+    Platform dependency: 'Ubuntu-20.04-host'
     Features: ['Sccache', 'UseConfigure']
     Environment variables: [
         'TARGET_CONFIGURE_ARGS=-release -force-debug-info -developer-build -no-warnings-are-errors -make examples -qt-harfbuzz -device linux-imx7-g++ -device-option "CROSS_COMPILE={{.Env.QEMUARMV7_TOOLCHAIN_CROSS_COMPILE}}" -device-option "DISTRO_OPTS=hard-float boot2qt" -no-feature-forkfd_pidfd',
         'TARGET_CMAKE_ARGS=-DCMAKE_TOOLCHAIN_FILE={{.Env.QEMUARMV7_TOOLCHAIN_FILE}} -DQT_BUILD_TOOLS_WHEN_CROSSCOMPILING=ON',
         'QT_YOCTO_ENVSETUP={{.Env.QEMUARMV7_TOOLCHAIN_ENVSETUP}}',
-        "QT_CMAKE_DIR=/opt/cmake-3.24.2/bin",
+        "QT_CMAKE_DIR=/opt/cmake-3.21.3/bin",
         'QT_SYSROOT_FOR_RUNNING_TESTS={{.Env.QEMUARMV7_TOOLCHAIN_SYSROOT}}',
         'GST_PLUGIN_SCANNER={{.Env.QEMUARMV7_TOOLCHAIN_SYSROOT}}/usr/libexec/gstreamer-1.0/gst-plugin-scanner',
         'QT_QUICK_BACKEND=software',
     ]
 -
-    Id: 'qemu-arm64-developer-build'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-50'
     Target os: 'QEMU'
     Target arch: 'arm64'
     Compiler: 'GCC'
-    Platform dependency: 'ubuntu-20.04'
+    Platform dependency: 'Ubuntu-20.04-host'
     Features: ['Sccache', 'UseConfigure']
     Environment variables: [
         'TARGET_CONFIGURE_ARGS=-release -force-debug-info -developer-build -no-warnings-are-errors -nomake examples -qt-harfbuzz -device linux-generic-g++ -device-option "CROSS_COMPILE={{.Env.QEMUARM64_TOOLCHAIN_CROSS_COMPILE}}" -device-option "DISTRO_OPTS=boot2qt" -no-feature-forkfd_pidfd',
         'TARGET_CMAKE_ARGS=-DCMAKE_TOOLCHAIN_FILE={{.Env.QEMUARM64_TOOLCHAIN_FILE}} -DQT_BUILD_TOOLS_WHEN_CROSSCOMPILING=ON',
         'QT_YOCTO_ENVSETUP={{.Env.QEMUARM64_TOOLCHAIN_ENVSETUP}}',
-        "QT_CMAKE_DIR=/opt/cmake-3.24.2/bin",
+        "QT_CMAKE_DIR=/opt/cmake-3.21.3/bin",
         'QT_SYSROOT_FOR_RUNNING_TESTS={{.Env.QEMUARM64_TOOLCHAIN_SYSROOT}}',
         'GST_PLUGIN_SCANNER={{.Env.QEMUARM64_TOOLCHAIN_SYSROOT}}/usr/libexec/gstreamer-1.0/gst-plugin-scanner',
         'QT_QUICK_BACKEND=software',
     ]
 -
-    Id: 'qemu-mips64-developer-build'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-50'
     Target os: 'QEMU'
     Target arch: 'mips64'
     Compiler: 'GCC'
-    Platform dependency: 'ubuntu-20.04'
+    Platform dependency: 'Ubuntu-20.04-host'
     Features: ['Sccache', 'DisableTests', 'UseConfigure']
     Environment variables: [
         'TARGET_CONFIGURE_ARGS=-release -force-debug-info -developer-build -no-warnings-are-errors -nomake examples -qt-harfbuzz -device linux-generic-g++ -device-option "CROSS_COMPILE={{.Env.QEMUMIPS64_TOOLCHAIN_CROSS_COMPILE}}" -device-option "DISTRO_OPTS=boot2qt" -no-feature-forkfd_pidfd',
         'TARGET_CMAKE_ARGS=-DCMAKE_TOOLCHAIN_FILE={{.Env.QEMUMIPS64_TOOLCHAIN_FILE}} -DQT_BUILD_TOOLS_WHEN_CROSSCOMPILING=ON',
         'QT_YOCTO_ENVSETUP={{.Env.QEMUMIPS64_TOOLCHAIN_ENVSETUP}}',
-        "QT_CMAKE_DIR=/opt/cmake-3.24.2/bin",
+        "QT_CMAKE_DIR=/opt/cmake-3.21.3/bin",
         'QT_SYSROOT_FOR_RUNNING_TESTS={{.Env.QEMUMIPS64_TOOLCHAIN_SYSROOT}}',
         'GST_PLUGIN_SCANNER={{.Env.QEMUMIPS64_TOOLCHAIN_SYSROOT}}/usr/libexec/gstreamer-1.0/gst-plugin-scanner',
         'QT_QUICK_BACKEND=software',

coin/platform_configs/cmake_platforms_qemu_qnx710.yaml

@@ -1,41 +1,39 @@
 Version: 2
 Configurations:
 -
-    Id: 'qnx-710-x86_64-developer-build-on-linux'
+    Id: 'qnx-x86_64-on-ubuntu20.04'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-50'
     Target os: 'QNX_710'
     Target arch: 'x86_64'
     Compiler: 'GCC'
     Target compiler: 'QCC'
-    Platform dependency: 'ubuntu-20.04'
+    Platform dependency: 'Ubuntu-20.04-host'
     Features: ['Packaging', 'VMSize8', 'UseConfigure']
     Environment variables: [
         'TARGET_CONFIGURE_ARGS=-release -force-debug-info -developer-build -no-dbus -nomake examples',
         'TARGET_CMAKE_ARGS=-DCMAKE_TOOLCHAIN_FILE={{.Env.QNX_710}}/qnx-toolchain-x8664.cmake -DQT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS=ON',
-        'QT_CMAKE_DIR=/opt/cmake-3.24.2/bin',
+        'QT_CMAKE_DIR=/opt/cmake-3.21.3/bin',
         'QNX_TEST_ENV=LD_LIBRARY_PATH={{.Env.QNX_QEMU_LD_LIBRARY_PATH}} QSG_RHI_BACKEND=software QT_QPA_PLATFORM=offscreen QTEST_ENVIRONMENT=ci',
     ]
 -
-    Id: 'qnx-710-arm64-on-linux'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-50'
     Target os: 'QNX_710'
     Target arch: 'arm64'
     Compiler: 'GCC'
     Target compiler: 'QCC'
-    Platform dependency: 'ubuntu-20.04'
+    Platform dependency: 'Ubuntu-20.04-host'
     Features: ['Packaging', 'DisableTests', 'UseConfigure']
     Environment variables: [
         'TARGET_CONFIGURE_ARGS=-release -force-debug-info -no-dbus -nomake examples',
         'TARGET_CMAKE_ARGS=-DCMAKE_TOOLCHAIN_FILE={{.Env.QNX_710}}/qnx-toolchain-aarch64le.cmake -DQT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS=ON',
     ]
 -
-    Id: 'qnx-710-armv7-on-linux'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-50'
     Target os: 'QNX_710'
     Target arch: 'armv7'
     Compiler: 'GCC'
     Target compiler: 'QCC'
-    Platform dependency: 'ubuntu-20.04'
+    Platform dependency: 'Ubuntu-20.04-host'
     Features: ['Packaging', 'DisableTests', 'UseConfigure']
     Environment variables: [
         'TARGET_CONFIGURE_ARGS=-release -force-debug-info -no-dbus -nomake examples',

coin/platform_configs/cmake_platforms_static_tests.yaml

@@ -1,8 +1,8 @@
 Version: 2
 Configurations:
 -
-    Id: 'sles-15_sp4-minimal-static'
-    Template: 'qtci-linux-SLES-15_SP4-x86_64-50'
+    Id: 'sles-15-static'
+    Template: 'qtci-linux-SLES-15_SP3-x86_64-51'
     Compiler: 'GCC'
     Features: ['Sccache', 'MinimalStaticTests', 'UseConfigure']
     Configure arguments: '-nomake examples -static -no-sql-mysql'
@@ -10,8 +10,7 @@ Configurations:
         'CMAKE_ARGS=-DOPENSSL_ROOT_DIR={{.Env.OPENSSL_HOME}}'
     ]
 -
-    Id: 'windows-10_22h2-minimal-static'
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'MSVC2019'
     Features: ['Sccache', 'MinimalStaticTests', 'UseConfigure']
     Configure arguments: '-release -force-debug-info -static -nomake examples -qt-zlib'
@@ -20,8 +19,7 @@ Configurations:
         'LLVM_INSTALL_DIR={{.Env.LLVM_INSTALL_DIR_msvc}}'
     ]
 -
-    Id: 'macos-11-minimal-static'
-    Template: 'qtci-macos-11-x86_64-105'
+    Template: 'qtci-macos-11-x86_64-104'
     Compiler: 'Clang'
     Features: ['Sccache', 'MinimalStaticTests', 'UseConfigure']
     Configure arguments: '-nomake examples -release -force-debug-info -static -no-framework'

coin/platform_configs/cmake_platforms_target_android.yaml

@@ -1,70 +0,0 @@
-Version: 2
-Configurations:
--
-    Id: 'android-arm64-on-macos'
-    Template: 'qtci-macos-12-x86_64-105'
-    Target os: 'Android_ANY'
-    Target arch: 'arm64'
-    Compiler: 'Clang'
-    Target compiler: 'Clang'
-    Platform dependency: 'macos-universal-on-x86_64'
-    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
-    Environment variables: [
-        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT_DEFAULT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis arm64-v8a',
-        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME_DEFAULT}} -DQT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS=ON',
-        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-macos-universal-clang',
-        'CONAN_PROFILE=coin/conan/profiles/ci-unix-android-arm64-clang',
-        'ANDROID_NDK_ROOT={{.Env.ANDROID_NDK_ROOT_DEFAULT}}'
-    ]
--
-    Id: 'android-armv7-on-windows'
-    Template: 'qtci-windows-10_22H2-x86_64-50'
-    Target os: 'Android_ANY'
-    Target arch: 'armv7'
-    Compiler: 'Mingw'
-    Target compiler: 'Clang'
-    Platform dependency: 'windows-10_22h2-mingw11'
-    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
-    Environment variables: [
-        'Path={{.Env.MINGW1120}}\bin;{{.Env.Path}}',
-        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT_DEFAULT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis armeabi-v7a -no-feature-pkg-config',
-        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME_DEFAULT}} -DQT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS=ON',
-        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-windows-x86_64-mingw',
-        'CONAN_PROFILE=coin/conan/profiles/ci-windows-android-armv7-clang',
-        'ANDROID_NDK_ROOT={{.Env.ANDROID_NDK_ROOT_DEFAULT}}'
-    ]
--
-    Id: 'android-x86-on-linux'
-    Template: 'qtci-linux-RHEL-8.4-x86_64-50'
-    Target os: 'Android_ANY'
-    Target arch: 'x86'
-    Compiler: 'GCC'
-    Target compiler: 'Clang'
-    Platform dependency: 'rhel-8.4'
-    Features: ['Packaging', 'Sccache', 'AndroidTestRun', 'VMSize8', 'UseConfigure']
-    Environment variables: [
-        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT_DEFAULT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86',
-        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME_DEFAULT}} -DQT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS=ON',
-        'NON_QTBASE_TARGET_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR_ANDROID}}',
-        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-linux-x86_64-gcc',
-        'CONAN_PROFILE=coin/conan/profiles/ci-unix-android-x86-clang',
-        'ANDROID_EMULATOR=@emulator_x86_api_23',
-        'ANDROID_NDK_ROOT={{.Env.ANDROID_NDK_ROOT_DEFAULT}}'
-    ]
--
-    Id: 'android-x86_64-on-linux'
-    Template: 'qtci-linux-RHEL-8.4-x86_64-50'
-    Target os: 'Android_ANY'
-    Target arch: 'x86_64'
-    Compiler: 'GCC'
-    Target compiler: 'Clang'
-    Platform dependency: 'rhel-8.4'
-    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
-    Environment variables: [
-        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT_DEFAULT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86_64',
-        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME_DEFAULT}} -DQT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS=ON',
-        'NON_QTBASE_TARGET_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR_ANDROID}}',
-        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-linux-x86_64-gcc',
-        'CONAN_PROFILE=coin/conan/profiles/ci-unix-android-x86_64-clang',
-        'ANDROID_NDK_ROOT={{.Env.ANDROID_NDK_ROOT_DEFAULT}}'
-    ]

coin/platform_configs/cmake_platforms_target_android_host_linux.yaml

@@ -1,42 +1,32 @@
 Version: 2
-Include: [
-    cmake_platforms.yaml: [
-        Windows10_22H2-Mingw11-x64-host,
-        rhel-8.4
-    ]
-]
 Configurations:
 -
-    Id: 'android-arm64-on-macos'
-    Template: 'qtci-macos-12-x86_64-105'
+    Template: 'qtci-linux-RHEL-8.4-x86_64-50'
     Target os: 'Android_ANY'
     Target arch: 'arm64'
-    Compiler: 'Clang'
+    Compiler: 'GCC'
     Target compiler: 'Clang'
-    Platform dependency: 'macos-universal-on-x86_64'
+    Platform dependency: 'RHEL-8.4-host'
     Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
     Environment variables: [
-        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT_LATEST}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis arm64-v8a',
-        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME_LATEST}} -DQT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS=ON',
-        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-macos-universal-clang',
-        'CONAN_PROFILE=coin/conan/profiles/ci-unix-android-arm64-clang',
-        'ANDROID_NDK_ROOT={{.Env.ANDROID_NDK_ROOT_LATEST}}'
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis arm64-v8a',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
+        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-linux-x86_64-gcc',
+        'CONAN_PROFILE=coin/conan/profiles/ci-unix-android-arm64-clang'
     ]
 -
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Template: 'qtci-linux-RHEL-8.4-x86_64-50'
     Target os: 'Android_ANY'
     Target arch: 'armv7'
-    Compiler: 'Mingw'
+    Compiler: 'GCC'
     Target compiler: 'Clang'
-    Platform dependency: 'Windows10_22H2-Mingw11-x64-host'
+    Platform dependency: 'RHEL-8.4-host'
     Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
     Environment variables: [
-        'Path={{.Env.MINGW1120}}\bin;{{.Env.Path}}',
-        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT_LATEST}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis armeabi-v7a -no-feature-pkg-config',
-        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME_LATEST}} -DQT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS=ON',
-        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-windows-x86_64-mingw',
-        'CONAN_PROFILE=coin/conan/profiles/ci-windows-android-armv7-clang',
-        'ANDROID_NDK_ROOT={{.Env.ANDROID_NDK_ROOT_LATEST}}'
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis armeabi-v7a',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
+        'CONAN_HOST_PROFILE=coin/conan/profiles/linux-x86_64-gcc',
+        'CONAN_PROFILE=coin/conan/profiles/unix-android-armv7-clang'
     ]
 -
     Template: 'qtci-linux-RHEL-8.4-x86_64-50'
@@ -44,15 +34,14 @@ Configurations:
     Target arch: 'x86'
     Compiler: 'GCC'
     Target compiler: 'Clang'
-    Platform dependency: 'rhel-8.4'
+    Platform dependency: 'RHEL-8.4-host'
     Features: ['Packaging', 'Sccache', 'AndroidTestRun', 'VMSize8', 'UseConfigure']
     Environment variables: [
-        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT_LATEST}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86',
-        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME_LATEST}} -DQT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS=ON',
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
         'CONAN_HOST_PROFILE=coin/conan/profiles/ci-linux-x86_64-gcc',
         'CONAN_PROFILE=coin/conan/profiles/ci-unix-android-x86-clang',
-        'ANDROID_EMULATOR=@emulator_x86_api_23',
-        'ANDROID_NDK_ROOT={{.Env.ANDROID_NDK_ROOT_LATEST}}'
+        'ANDROID_EMULATOR=@emulator_x86_api_23'
     ]
 -
     Template: 'qtci-linux-RHEL-8.4-x86_64-50'
@@ -60,12 +49,11 @@ Configurations:
     Target arch: 'x86_64'
     Compiler: 'GCC'
     Target compiler: 'Clang'
-    Platform dependency: 'rhel-8.4'
+    Platform dependency: 'RHEL-8.4-host'
     Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
     Environment variables: [
-        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT_LATEST}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86_64',
-        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME_LATEST}} -DQT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS=ON',
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86_64',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
         'CONAN_HOST_PROFILE=coin/conan/profiles/ci-linux-x86_64-gcc',
-        'CONAN_PROFILE=coin/conan/profiles/ci-unix-android-x86_64-clang',
-        'ANDROID_NDK_ROOT={{.Env.ANDROID_NDK_ROOT_LATEST}}'
+        'CONAN_PROFILE=coin/conan/profiles/ci-unix-android-x86_64-clang'
     ]

coin/platform_configs/cmake_platforms_target_android_host_macos.yaml

@@ -0,0 +1,59 @@
+Version: 2
+Configurations:
+-
+    Id: 'android-arm64-on-macos'
+    Template: 'qtci-macos-12-x86_64-102'
+    Target os: 'Android_ANY'
+    Target arch: 'arm64'
+    Compiler: 'Clang'
+    Target compiler: 'Clang'
+    Platform dependency: 'macos-latest-xcode-universal-packaging-build'
+    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
+    Environment variables: [
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis arm64-v8a',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
+        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-macos-universal-clang',
+        'CONAN_PROFILE=coin/conan/profiles/ci-unix-android-arm64-clang'
+    ]
+-
+    Template: 'qtci-macos-12-x86_64-102'
+    Target os: 'Android_ANY'
+    Target arch: 'armv7'
+    Compiler: 'Clang'
+    Target compiler: 'Clang'
+    Platform dependency: 'macos-latest-xcode-universal-packaging-build'
+    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
+    Environment variables: [
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis armeabi-v7a',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
+        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-macos-universal-clang',
+        'CONAN_PROFILE=coin/conan/profiles/ci-unix-android-armv7-clang'
+    ]
+-
+    Template: 'qtci-macos-12-x86_64-102'
+    Target os: 'Android_ANY'
+    Target arch: 'x86'
+    Compiler: 'Clang'
+    Target compiler: 'Clang'
+    Platform dependency: 'macos-latest-xcode-universal-packaging-build'
+    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
+    Environment variables: [
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
+        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-macos-universal-clang',
+        'CONAN_PROFILE=coin/conan/profiles/ci-unix-android-x86-clang'
+    ]
+-
+    Template: 'qtci-macos-12-x86_64-102'
+    Target os: 'Android_ANY'
+    Target arch: 'x86_64'
+    Compiler: 'Clang'
+    Target compiler: 'Clang'
+    Platform dependency: 'macos-latest-xcode-universal-packaging-build'
+    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
+    Environment variables: [
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86_64',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
+        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-macos-universal-clang',
+        'CONAN_PROFILE=coin/conan/profiles/ci-unix-android-x86_64-clang'
+    ]

coin/platform_configs/cmake_platforms_target_android_host_windows.yaml

@@ -0,0 +1,62 @@
+Version: 2
+Configurations:
+-
+    Template: 'qtci-windows-10_21H2-x86_64-51'
+    Target os: 'Android_ANY'
+    Target arch: 'arm64'
+    Compiler: 'Mingw'
+    Target compiler: 'Clang'
+    Platform dependency: 'Windows10_21H2-Mingw11-x64-host'
+    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
+    Environment variables: [
+        'Path={{.Env.MINGW1120}}\bin;{{.Env.Path}}',
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis arm64-v8a -no-feature-pkg-config',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
+        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-windows-x86_64-mingw',
+        'CONAN_PROFILE=coin/conan/profiles/ci-windows-android-arm64-clang'
+    ]
+-
+    Template: 'qtci-windows-10_21H2-x86_64-51'
+    Target os: 'Android_ANY'
+    Target arch: 'armv7'
+    Compiler: 'Mingw'
+    Target compiler: 'Clang'
+    Platform dependency: 'Windows10_21H2-Mingw11-x64-host'
+    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
+    Environment variables: [
+        'Path={{.Env.MINGW1120}}\bin;{{.Env.Path}}',
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis armeabi-v7a -no-feature-pkg-config',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
+        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-windows-x86_64-mingw',
+        'CONAN_PROFILE=coin/conan/profiles/ci-windows-android-armv7-clang'
+    ]
+-
+    Template: 'qtci-windows-10_21H2-x86_64-51'
+    Target os: 'Android_ANY'
+    Target arch: 'x86'
+    Compiler: 'Mingw'
+    Target compiler: 'Clang'
+    Platform dependency: 'Windows10_21H2-Mingw11-x64-host'
+    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
+    Environment variables: [
+        'Path={{.Env.MINGW1120}}\bin;{{.Env.Path}}',
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86 -no-feature-pkg-config',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
+        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-windows-x86_64-mingw',
+        'CONAN_PROFILE=coin/conan/profiles/ci-windows-android-x86-clang'
+    ]
+-
+    Template: 'qtci-windows-10_21H2-x86_64-51'
+    Target os: 'Android_ANY'
+    Target arch: 'x86_64'
+    Compiler: 'Mingw'
+    Target compiler: 'Clang'
+    Platform dependency: 'Windows10_21H2-Mingw11-x64-host'
+    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
+    Environment variables: [
+        'Path={{.Env.MINGW1120}}\bin;{{.Env.Path}}',
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86_64 -no-feature-pkg-config',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
+        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-windows-x86_64-mingw',
+        'CONAN_PROFILE=coin/conan/profiles/ci-windows-android-x86_64-clang'
+    ]

coin/platform_configs/cmake_platforms_wasm.yaml

@@ -1,26 +1,52 @@
 Version: 2
 Configurations:
 -
-    Template: 'qtci-linux-openSUSE-15.4-x86_64-50'
+    Template: 'qtci-linux-openSUSE-15.3-x86_64-50'
     Target os: 'WebAssembly'
     Compiler: 'GCC'
-    Platform dependency: 'opensuse-15.4-developer-build'
+    Platform dependency: 'OpenSUSE-15.3-host'
     Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
     Environment variables: [
         'EM_CONFIG={{.Env.EMSDK}}/.emscripten',
         'TARGET_CONFIGURE_ARGS=-release -platform wasm-emscripten -nomake examples',
-        'TARGET_CMAKE_ARGS=-DQT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS=ON',
         'CONAN_HOST_PROFILE=coin/conan/profiles/ci-linux-x86_64-gcc-debug-developer',
         'CONAN_PROFILE=coin/conan/profiles/ci-linux-webassembly-x86_64-clang'
     ]
 -
     Id: 'webassembly-thread-asyncify'
-    Template: 'qtci-linux-openSUSE-15.4-x86_64-50'
+    Template: 'qtci-linux-openSUSE-15.3-x86_64-50'
     Target os: 'WebAssembly'
     Compiler: 'GCC'
-    Platform dependency: 'opensuse-15.4-developer-build'
+    Platform dependency: 'OpenSUSE-15.3-host'
     Features: ['Sccache', 'DisableTests']
     Environment variables: [
         'EM_CONFIG={{.Env.EMSDK}}/.emscripten',
         'TARGET_CONFIGURE_ARGS=-DQT_QMAKE_TARGET_MKSPEC=wasm-emscripten -DQT_BUILD_EXAMPLES=OFF -DCMAKE_BUILD_TYPE=RelWithDebInfo -DCMAKE_C_COMPILER_LAUNCHER=sccache -DCMAKE_CXX_COMPILER_LAUNCHER=sccache -DFEATURE_thread=ON -DQT_QMAKE_DEVICE_OPTIONS="QT_EMSCRIPTEN_ASYNCIFY=1"',
         'NON_QTBASE_TARGET_CONFIGURE_ARGS=-DCMAKE_C_COMPILER_LAUNCHER=sccache -DCMAKE_CXX_COMPILER_LAUNCHER=sccache']
+-
+    Template: 'qtci-windows-10_21H2-x86_64-51'
+    Target os: 'WebAssembly'
+    Compiler: 'Mingw'
+    Target compiler: 'Clang'
+    Platform dependency: 'Windows10_21H2-Mingw11-x64-host'
+    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
+    Environment variables: [
+        'Path={{.Env.EMSDK_PATH}};{{.Env.MINGW1120}}\bin;{{.Env.Path}}',
+        'EM_CONFIG={{.Env.EMSDK}}/.emscripten',
+        'TARGET_CONFIGURE_ARGS=-release -platform wasm-emscripten -nomake examples',
+        'NON_QTBASE_TARGET_CMAKE_ARGS=-DFEATURE_pkg_config=OFF',
+        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-windows-x86_64-mingw',
+        'CONAN_PROFILE=coin/conan/profiles/ci-windows-webassembly-x86_64-clang']
+-
+    Template: 'qtci-macos-12-x86_64-102'
+    Target os: 'WebAssembly'
+    Compiler: 'Clang'
+    Target compiler: 'Clang'
+    Platform dependency: 'macos-latest-xcode-universal-packaging-build'
+    Features: ['Packaging', 'Sccache', 'DisableTests', 'UseConfigure']
+    Environment variables: [
+        'EM_CONFIG={{.Env.EMSDK}}/.emscripten',
+        'TARGET_CONFIGURE_ARGS=-release -platform wasm-emscripten -nomake examples',
+        'CONAN_HOST_PROFILE=coin/conan/profiles/ci-macos-universal-clang',
+        'CONAN_PROFILE=coin/conan/profiles/ci-macos-webassembly-x86_64-clang'
+    ]

coin/platform_configs/default.yaml

@@ -1,7 +1,6 @@
 Version: 2
 Configurations:
 -
-    Id: 'ubuntu-20.04-license-check'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-50'
     Compiler: 'GCC'
     Features: ['TestOnly', 'LicenseCheck', 'UseLegacyInstructions']

coin/platform_configs/flashing-wizard.yaml

@@ -7,7 +7,7 @@ Configurations:
         Features: ['Packaging', 'UseLegacyInstructions']
         Configure arguments: '-qmake -opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -opengl dynamic -nomake examples -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64% -static -no-icu'
     -
-        Template: 'qtci-windows-10_22H2-x86_64-50'
+        Template: 'qtci-windows-10_21H2-x86_64-51'
         Compiler: 'MSVC2019'
         Features: ['Packaging', 'UseLegacyInstructions']
         Configure arguments: '-qmake -opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -opengl dynamic -nomake examples -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64% -static -no-icu'
@@ -18,7 +18,7 @@ Configurations:
         Features: ['Packaging', 'UseLegacyInstructions']
         Configure arguments: '-qmake -opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -nomake examples -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x86% -L %OPENSSL_LIB_x86% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x86% -L %MYSQL_LIB_x86% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x86% -L %POSTGRESQL_LIB_x86% -static -no-icu'
     -
-        Template: 'qtci-windows-10_22H2-x86_64-50'
+        Template: 'qtci-windows-10_21H2-x86_64-51'
         Compiler: 'MSVC2019'
         Target arch: 'x86'
         Features: ['Packaging', 'UseLegacyInstructions']

coin/platform_configs/integrity.yaml

@@ -1,11 +1,11 @@
 Version: 2
 Configurations:
     -
-      Id: "integrity-arm64"
+      Id: "integrity-arm64-on-ubuntu20.04"
       Template: 'qtci-linux-Ubuntu-20.04-x86_64-50'
       Compiler: 'GCC'
       Target os: 'INTEGRITY'
-      Platform dependency: 'ubuntu-20.04'
+      Platform dependency: 'Ubuntu-20.04-host'
       Features: ['MinimalStaticTests', 'DoNotRunTests', 'VMSize16', 'UseConfigure']
       Environment variables: [
           'TARGET_CONFIGURE_ARGS=-nomake examples -device integrity-armv8-SA8155P -no-feature-library -no-feature-printdialog -no-dbus -no-feature-gtk3 -no-feature-glib -no-feature-libudev -qt-harfbuzz -qt-pcre -no-sql-mysql',

coin/platform_configs/ios-tests.yaml

@@ -1,13 +1,13 @@
 Version: 2
 Configurations:
 -
-    Id: "ios-tests-on-macos"
-    Template: 'qtci-macos-12-x86_64-105'
+    Id: "ios-tests-target"
+    Template: 'qtci-macos-12-x86_64-102'
     Target os: 'IOS_ANY'
     Target arch: 'arm64'
     Compiler: 'Clang'
     Target compiler: 'Clang'
-    Platform dependency: 'macos-universal-on-x86_64'
+    Platform dependency: 'macos-latest-xcode-universal-packaging-build'
     Features: ['Sccache', 'DebugAndRelease', 'MinimalStaticTests', 'UseConfigure']
     Environment variables: [
         'TARGET_CONFIGURE_ARGS=-debug-and-release -nomake examples -platform macx-ios-clang'

coin/platform_configs/linux_android_tests_developer.yaml

@@ -1,18 +1,16 @@
 Version: 2
 Configurations:
 -
-    Id: 'android-x86-developer-build-testrun-on-linux'
     Template: 'qtci-linux-RHEL-8.4-x86_64-50'
     Target os: 'Android_ANY'
     Target arch: 'x86'
     Compiler: 'GCC'
     Target compiler: 'Clang'
-    Platform dependency: 'rhel-8.4'
+    Platform dependency: 'RHEL-8.4-host'
     Features: ['Packaging', 'Sccache', 'AndroidTestRun', 'UseConfigure']
     Environment variables: [
-        'TARGET_CONFIGURE_ARGS=-nomake examples -debug -developer-build -android-ndk {{.Env.ANDROID_NDK_ROOT_DEFAULT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86',
-        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME_DEFAULT}}',
-        'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR_ANDROID}}',
+        'TARGET_CONFIGURE_ARGS=-nomake examples -debug -developer-build -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
         'CONAN_HOST_PROFILE=coin/conan/profiles/linux-x86_64-gcc',
         'CONAN_INSTALL_DIR={{.InstallDir}}/target',
         'CONAN_PROFILE=coin/conan/profiles/unix-android-x86-clang',

coin/platform_configs/macos.yaml

@@ -8,20 +8,20 @@ Configurations:
     # Build on recent macOS version with latest Xcode
 
     -
-        Id: 'macos-universal-on-x86_64'
-        Template: 'qtci-macos-12-x86_64-105'
+        Id: 'macos-latest-xcode-universal-packaging-build'
+        Template: 'qtci-macos-12-x86_64-102'
         Compiler: 'Clang'
         Target arch: 'x86_64-arm64'
         Features: ['Packaging', 'Sccache', 'DoNotRunTests', 'WarningsAreErrors', 'UseConfigure']
         Configure arguments: '-nomake examples -release -force-debug-info -separate-debug-info -headersclean -framework'
         Environment variables: [
             'CMAKE_ARGS=-DCMAKE_OSX_ARCHITECTURES="x86_64;arm64" -DODBC_ROOT=/usr/local/opt/libiodbc -DPostgreSQL_ROOT={{.Env.POSTGRESQLBINPATH}}/.. -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_DIR}}',
-            'NON_QTBASE_CMAKE_ARGS=-DFEATURE_gds=OFF -DFFMPEG_DIR={{.Env.FFMPEG_DIR}}',
+            'NON_QTBASE_CMAKE_ARGS=-DFEATURE_gds=OFF',
             'CONAN_PROFILE=coin/conan/profiles/ci-macos-universal-clang'
         ]
 
     -
-        Id: 'macos-universal-on-arm64'
+        Id: 'macos-latest-xcode-arm64-universal-build'
         Template: 'qtci-macos-12-arm64'
         Compiler: 'Clang'
         Target arch: 'x86_64-arm64'
@@ -38,55 +38,49 @@ Configurations:
         Template: 'qtci-macos-10.14-x86_64'
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly', 'Packaging']
-        Platform dependency: 'macos-universal-on-x86_64'
+        Platform dependency: 'macos-latest-xcode-universal-packaging-build'
     -
         Id: 'macos-10.15-x86_64-tests'
         Template: 'qtci-macos-10.15-x86_64-102'
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly', 'Packaging']
-        Platform dependency: 'macos-universal-on-x86_64'
+        Platform dependency: 'macos-latest-xcode-universal-packaging-build'
     -
         Id: 'macos-11-x86_64-tests'
-        Template: 'qtci-macos-11-x86_64-105'
+        Template: 'qtci-macos-11-x86_64-104'
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly', 'Packaging']
-        Platform dependency: 'macos-universal-on-x86_64'
+        Platform dependency: 'macos-latest-xcode-universal-packaging-build'
     -
         Id: 'macos-11-arm64-tests'
         Template: 'qtci-macos-11.0-arm64'
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly', 'Packaging']
-        Platform dependency: 'macos-universal-on-x86_64'
+        Platform dependency: 'macos-latest-xcode-universal-packaging-build'
     -
         Id: 'macos-12-arm64-tests'
         Template: 'qtci-macos-12-arm64'
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly', 'Packaging']
-        Platform dependency: 'macos-universal-on-x86_64'
-    -
-        Id: 'macos-13-arm64-tests'
-        Template: 'qtci-macos-13-arm64'
-        Compiler: 'Clang'
-        Features: ['Sccache', 'TestOnly', 'Packaging']
-        Platform dependency: 'macos-universal-on-x86_64'
+        Platform dependency: 'macos-latest-xcode-universal-packaging-build'
     -
         Id: 'macos-12-x86_64-tests'
-        Template: 'qtci-macos-12-x86_64-105'
+        Template: 'qtci-macos-12-x86_64-102'
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly', 'Packaging']
-        Platform dependency: 'macos-universal-on-x86_64'
+        Platform dependency: 'macos-latest-xcode-universal-packaging-build'
     -
-        Id: 'macos-12-arm-on-arm64-tests'
+        Id: 'macos-12-arm64-arm64-universal-build-tests'
         Template: 'qtci-macos-12-arm64'
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly']
-        Platform dependency: 'macos-universal-on-arm64'
+        Platform dependency: 'macos-latest-xcode-arm64-universal-build'
     -
-        Id: 'macos-12-arm-on-x86_64-tests'
-        Template: 'qtci-macos-12-x86_64-105'
+        Id: 'macos-12-x86_64-arm64-universal-build-tests'
+        Template: 'qtci-macos-12-x86_64-102'
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly']
-        Platform dependency: 'macos-universal-on-arm64'
+        Platform dependency: 'macos-latest-xcode-arm64-universal-build'
 
     # =========================================================================
     # Developer build. Single architecture builds.
@@ -95,17 +89,16 @@ Configurations:
     # Build on recent macOS version with latest Xcode
 
     -
-        Id: 'macos-12-x86_64-developer-build'
-        Template: 'qtci-macos-12-x86_64-105'
+        Id: 'macos-latest-xcode-x86_64-developer-build'
+        Template: 'qtci-macos-12-x86_64-102'
         Compiler: 'Clang'
         Features: ['Sccache', 'DoNotRunTests', 'WarningsAreErrors', 'UseConfigure']
         Configure arguments: '-developer-build -release -force-debug-info -no-pch -no-framework -qtnamespace TestNamespace -make examples'
         Environment variables: [
-            'CMAKE_ARGS=-DOPENSSL_ROOT_DIR={{.Env.OPENSSL_DIR}}',
-            'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR}}'
+            'CMAKE_ARGS=-DOPENSSL_ROOT_DIR={{.Env.OPENSSL_DIR}}'
         ]
     -
-        Id: 'macos-12-arm64-developer-build'
+        Id: 'macos-latest-xcode-arm64-developer-build'
         Template: 'qtci-macos-12-arm64'
         Compiler: 'Clang'
         Features: ['DoNotRunTests', 'WarningsAreErrors', 'UseConfigure']
@@ -120,40 +113,34 @@ Configurations:
         Template: 'qtci-macos-10.14-x86_64'
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly']
-        Platform dependency: 'macos-12-x86_64-developer-build'
+        Platform dependency: 'macos-latest-xcode-x86_64-developer-build'
     -
         Id: 'macos-10.15-x86_64-developer-build-tests'
         Template: 'qtci-macos-10.15-x86_64-102'
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly']
-        Platform dependency: 'macos-12-x86_64-developer-build'
+        Platform dependency: 'macos-latest-xcode-x86_64-developer-build'
     -
         Id: 'macos-11-x86_64-developer-build-tests'
-        Template: 'qtci-macos-11-x86_64-105'
+        Template: 'qtci-macos-11-x86_64-104'
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly']
-        Platform dependency: 'macos-12-x86_64-developer-build'
+        Platform dependency: 'macos-latest-xcode-x86_64-developer-build'
     -
         Id: 'macos-11-arm64-developer-build-tests'
         Template: 'qtci-macos-11.0-arm64'
         Compiler: 'Clang'
         Features: ['TestOnly']
-        Platform dependency: 'macos-12-arm64-developer-build'
+        Platform dependency: 'macos-latest-xcode-arm64-developer-build'
     -
         Id: 'macos-12-x86_64-developer-build-tests'
-        Template: 'qtci-macos-12-x86_64-105'
+        Template: 'qtci-macos-12-x86_64-102'
         Compiler: 'Clang'
         Features: ['Sccache', 'TestOnly']
-        Platform dependency: 'macos-12-x86_64-developer-build'
+        Platform dependency: 'macos-latest-xcode-x86_64-developer-build'
     -
         Id: 'macos-12-arm64-developer-build-tests'
         Template: 'qtci-macos-12-arm64'
         Compiler: 'Clang'
         Features: ['TestOnly']
-        Platform dependency: 'macos-12-arm64-developer-build'
-    -
-        Id: 'macos-13-arm64-developer-build-tests'
-        Template: 'qtci-macos-13-arm64'
-        Compiler: 'Clang'
-        Features: ['TestOnly']
-        Platform dependency: 'macos-12-arm64-developer-build'
+        Platform dependency: 'macos-latest-xcode-arm64-developer-build'

coin/platform_configs/nightly_qnx710_host_windows.yaml

@@ -1,21 +1,19 @@
 Version: 2
 Include: [
     cmake_platforms.yaml: [
-        windows-10_22h2-msvc2019-developer-build
+        Windows10_21H2-MSVC2019-x64-host
     ]
 ]
 Configurations:
 -
-    Id: 'qnx-710-arm64-on-windows'
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Target os: 'QNX_710'
     Target arch: 'arm64'
     Compiler: 'MSVC2019'
     Target compiler: 'QCC'
-    Platform dependency: 'windows-10_22h2-msvc2019-developer-build'
+    Platform dependency: 'Windows10_21H2-MSVC2019-x64-host'
     Features: ['DisableTests', 'UseConfigure']
     Environment variables: [
         'TARGET_CONFIGURE_ARGS=-release -force-debug-info -no-dbus -nomake examples -no-pch',
         'TARGET_CMAKE_ARGS=-DCMAKE_TOOLCHAIN_FILE={{.Env.QNX_710}}\qnx-toolchain-aarch64le.cmake -DCMAKE_LIBRARY_PATH={{.Env.QNX_710}}\target\qnx7\aarch64le\lib;{{.Env.QNX_710}}\target\qnx7\aarch64le\usr\lib -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -G "Ninja"',
-        'NON_QTBASE_TARGET_CMAKE_ARGS=-DCMAKE_BUILD_WITH_INSTALL_RPATH=ON'
     ]

coin/platform_configs/precheck.yaml

@@ -2,21 +2,21 @@ Version: 2
 Module only: True
 Include: [
   cmake_platforms.yaml: [
-    "ubuntu-20.04",
-    "windows-10_22h2-msvc2019-developer-build",
+    "Ubuntu-20.04-host",
+    "Windows10_21H2-MSVC2019-x64-host",
     "ios-universal"
   ],
   macos.yaml: [
     "macos-12-x86_64-tests",
   ],
-  cmake_platforms_target_android.yaml: [
+  cmake_platforms_target_android_host_macos.yaml: [
     "android-arm64-on-macos"
   ],
   cmake_platforms_qemu.yaml: [
-    "qemu-armv7-developer-build"
+    "qemu-armv7-on-ubuntu20.04"
   ],
   cmake_platforms_qemu_qnx710.yaml: [
-    "qnx-710-x86_64-developer-build-on-linux"
+    "qnx-x86_64-on-ubuntu20.04"
   ]
 ]
 Configurations: []

coin/platform_configs/qmake2cmake.yaml

@@ -2,7 +2,7 @@ Version: 2
 Module only: True
 Configurations:
 -
-    Template: 'qtci-macos-12-x86_64-105'
+    Template: 'qtci-macos-12-x86_64-102'
     Compiler: 'Clang'
     Features: ['DisableTests']
 -

coin/platform_configs/qt-creator.yaml

@@ -2,7 +2,7 @@ Version: 2
 Module only: True
 Configurations:
 -
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'MSVC2019'
     Features: ['Packaging', 'Sccache', 'DebugAndRelease']
     Configure arguments: ''

coin/platform_configs/qtdeclarative.yaml

@@ -2,6 +2,7 @@ Version: 2
 Include: [
     cmake_platforms.yaml,
     integrity.yaml,
-    cmake_platforms_static_tests.yaml
+    cmake_platforms_static_tests.yaml,
+    linux_android_tests_developer.yaml
 ]
 Configurations: []

coin/platform_configs/qtsaferenderer.yaml

@@ -1,24 +1,24 @@
 Version: 2
 Configurations:
 -
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'Mingw'
     Environment variables: ['PATH=C:\MINGW1120\mingw64\bin;$PATH']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -developer-build -nomake tests -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -plugin-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64% -platform win32-g++'
+    Configure arguments: '-qmake -opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -developer-build -nomake tests -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -plugin-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64% -platform win32-g++'
     Features: ['UseLegacyInstructions']
 -
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'Mingw'
     Environment variables: ['PATH=C:\MINGW1120\mingw64\bin;$PATH']
     Features: ['Packaging', 'DisableTests', 'UseLegacyInstructions']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -static -nomake tests -nomake examples -no-icu -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -plugin-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -platform win32-g++'
+    Configure arguments: '-qmake -opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -static -nomake tests -nomake examples -no-icu -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -plugin-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -platform win32-g++'
 -
     Template: 'qtci-linux-RHEL-8.4-x86_64-50'
     Compiler: 'GCC'
     Features: ['Packaging', 'DisableTests', 'UseLegacyInstructions']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -static -nomake tests -nomake examples -no-use-gold-linker -no-icu -no-fontconfig -qt-freetype -no-opengl -qpa offscreen -no-xcb -qt-libpng -no-vulkan'
+    Configure arguments: '-qmake -opensource -confirm-license -verbose -prefix /home/qt/work/install -release -static -nomake tests -nomake examples -no-use-gold-linker -no-icu -no-fontconfig -qt-freetype -no-opengl -qpa offscreen -no-xcb -qt-libpng -no-vulkan'
 -
-    Template: 'qtci-linux-Ubuntu-20.04-x86_64-50'
+    Template: 'qtci-linux-Ubuntu-18.04-x86_64-50'
     Compiler: 'GCC'
     Features: ['Packaging', 'DisableTests', 'UseLegacyInstructions']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -static -nomake tests -nomake examples -no-use-gold-linker -no-icu -no-fontconfig -qt-freetype -no-opengl -qpa offscreen -no-xcb -qt-libpng -no-vulkan'
+    Configure arguments: '-qmake -opensource -confirm-license -verbose -prefix /home/qt/work/install -release -static -nomake tests -nomake examples -no-use-gold-linker -no-icu -no-fontconfig -qt-freetype -no-opengl -qpa offscreen -no-xcb -qt-libpng -no-vulkan'

coin/platform_configs/qtwebkit.yaml

@@ -1,7 +1,7 @@
 Version: 2
 Configurations:
 -
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'Mingw'
     Environment variables: ['PATH=C:\MINGW1120_i686\mingw32\bin;$PATH']
     Features: ['Packaging', UseLegacyInstructions']

coin/platform_configs/tqtc-android-automotive.yaml

@@ -1,15 +1,18 @@
 Version: 2
-Include: [ cmake_platforms_target_android.yaml ]
+Include: [
+    cmake_platforms_target_android_host_linux.yaml,
+    cmake_platforms_target_android_host_macos.yaml,
+    cmake_platforms_target_android_host_windows.yaml
+    ]
 Configurations:
 -
-    Id: 'automotive-ubuntu-20.04-documentation'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-50'
     Compiler: 'GCC'
     Features: ['Sccache', 'Documentation', 'TestDocs', 'UseConfigure']
     Configure arguments: '-make examples -developer-build -c++std c++20 -linker gold -no-warnings-are-errors -qtlibinfix TestInfix -qtnamespace TestNamespace'
 -
-    Id: 'windows-10_22h2-mingw11'
-    Template: 'qtci-windows-10_22H2-x86_64-50'
+    Id: 'Windows10_21H2-Mingw11-x64-host'
+    Template: 'qtci-windows-10_21H2-x86_64-51'
     Compiler: 'Mingw'
     Features: ['Packaging', 'Sccache', 'DoNotRunTests', 'UseConfigure']
     Configure arguments: '-release -force-debug-info -separate-debug-info -nomake examples -qt-zlib -qt-freetype -qt-libjpeg'
@@ -20,8 +23,8 @@ Configurations:
         'LLVM_INSTALL_DIR={{.Env.LLVM_INSTALL_DIR_mingw}}'
     ]
 -
-    Id: 'macos-universal-on-x86_64'
-    Template: 'qtci-macos-12-x86_64-105'
+    Id: 'macos-latest-xcode-universal-packaging-build'
+    Template: 'qtci-macos-12-x86_64-102'
     Compiler: 'Clang'
     Target arch: 'x86_64-arm64'
     Features: ['Packaging', 'Sccache', 'DoNotRunTests', 'WarningsAreErrors', 'UseConfigure']
@@ -32,7 +35,7 @@ Configurations:
         'CONAN_PROFILE=coin/conan/profiles/macos-universal-clang'
     ]
 -
-    Id: 'rhel-8.4'
+    Id: 'RHEL-8.4-host'
     Template: 'qtci-linux-RHEL-8.4-x86_64-50'
     Compiler: 'GCC'
     Features: ['Packaging', 'Sccache', 'DoNotRunTests', 'UseConfigure']
@@ -42,18 +45,16 @@ Configurations:
         'CONAN_PROFILE=coin/conan/profiles/linux-x86_64-gcc'
     ]
 -
-    Id: "automotive-android-x86-on-linux"
     Template: 'qtci-linux-RHEL-8.4-x86_64-50'
     Target os: 'Android_ANY'
     Target arch: 'x86'
     Compiler: 'GCC'
     Target compiler: 'Clang'
-    Platform dependency: 'rhel-8.4'
+    Platform dependency: 'RHEL-8.4-host'
     Features: ['Packaging', 'Sccache', 'AndroidTestRun', 'VMSize8', 'UseConfigure']
     Environment variables: [
-        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT_DEFAULT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86',
-        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME_DEFAULT}}',
-        'NON_QTBASE_CMAKE_ARGS=-DFFMPEG_DIR={{.Env.FFMPEG_DIR_ANDROID}}',
+        'TARGET_CONFIGURE_ARGS=-nomake examples -release -force-debug-info -android-ndk {{.Env.ANDROID_NDK_ROOT}} -android-sdk {{.Env.ANDROID_SDK_ROOT}} -android-abis x86',
+        'TARGET_CMAKE_ARGS=-DCMAKE_C_COMPILER_FRONTEND_VARIANT=GNU -DCMAKE_CXX_COMPILER_FRONTEND_VARIANT=GNU -DOPENSSL_ROOT_DIR={{.Env.OPENSSL_ANDROID_HOME}}',
         'CONAN_HOST_PROFILE=coin/conan/profiles/linux-x86_64-gcc',
         'CONAN_PROFILE=coin/conan/profiles/unix-android-x86-clang',
         'ANDROID_EMULATOR=@automotive_emulator_x86_api_30'

coin/platform_configs/tqtc-qtinsighttracker.yaml

@@ -1,3 +0,0 @@
-Version: 2
-Include: [cmake_platforms.yaml]
-Configurations: []

coin/platform_configs/webos.yaml

@@ -1,54 +1,54 @@
 Version: 2
 Module only: true
 Configurations:
-  - Id: 'webos-emulator-build'
+  - Id: 'WebOS-emulator-build'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['DoNotRunTests']
     Environment variables: ['BUILD_EMULATOR=enabled']
-  - Id: 'webos-emulator-qtbase-tests'
+  - Id: 'WebOS-emulator-qtbase-tests'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['TestOnly']
     Environment variables: ['MODULE=qtbase']
-    Platform dependency: 'webos-emulator-build'
-  - Id: 'webos-emulator-qtdeclarative-tests'
+    Platform dependency: 'WebOS-emulator-build'
+  - Id: 'WebOS-emulator-qtdeclarative-tests'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['TestOnly']
     Environment variables: ['MODULE=qtdeclarative']
-    Platform dependency: 'webos-emulator-build'
-  - Id: 'webos-emulator-qtwayland-tests'
+    Platform dependency: 'WebOS-emulator-build'
+  - Id: 'WebOS-emulator-qtwayland-tests'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['TestOnly']
     Environment variables: ['MODULE=qtwayland']
-    Platform dependency: 'webos-emulator-build'
-  - Id: 'webos-emulator-qtshadertools-tests'
+    Platform dependency: 'WebOS-emulator-build'
+  - Id: 'WebOS-emulator-qtshadertools-tests'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['TestOnly']
     Environment variables: ['MODULE=qtshadertools']
-    Platform dependency: 'webos-emulator-build'
-  - Id: 'webos-emulator-qtgraphicaleffects-tests'
+    Platform dependency: 'WebOS-emulator-build'
+  - Id: 'WebOS-emulator-qtgraphicaleffects-tests'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['TestOnly']
     Environment variables: ['MODULE=qtgraphicaleffects']
-    Platform dependency: 'webos-emulator-build'
-  - Id: 'webos-raspberry-build'
+    Platform dependency: 'WebOS-emulator-build'
+  - Id: 'WebOS-raspberry-build'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['DoNotRunTests']
     Environment variables: ['BUILD_RASPBERRY=enabled']
-  - Id: 'webos-ndk-installer-build'
+  - Id: 'WebOS-NDK-installer-build'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['DoNotRunTests']
     Environment variables: ['BUILD_NDK_INSTALLER=enabled']
-  - Id: 'webos-ndk-install'
+  - Id: 'WebOS-NDK-install'
     Template: 'qtci-linux-Ubuntu-20.04-x86_64-51'
     Compiler: 'GCC'
     Features: ['TestOnly']
-    Platform dependency: ['webos-raspberry-build', 'webos-ndk-installer-build']
+    Platform dependency: ['WebOS-raspberry-build', 'WebOS-NDK-installer-build']
     Environment variables: ['TEST_INSTALL_NDK=enabled']

coin/pre-provisioning/qtci-linux-SLES-15_SP4-x86_64/README_MANUAL_INSTALLATIONS

@@ -1,64 +0,0 @@
-### SUSE Linux Enterprise Server 15 SP4 ###
-
-# Installation #
-Language: English (US)
-Keyboard Layout: English (US)
-
-Available Extensions and Modules:
-   Basesystem Module
-   Desktop Applications Module
-   Python 3 Module
-   Server Applications Module
-
-SLES with GNOME
-
-Region: Etc
-Time Zone: UTC
-
-Create user with automatic login
-
-disable firewall
-
-Displays: Resolution 1280x800
-Power: Screen Blank: Never
-Privacy: Screen lock: Automatic screen lock: disable
-Privacy: Screen lock: Show notifications on lock screen: disable
-
-# Add user to sudoers
-Add 'qt ALL=NOPASSWD: ALL' to /etc/sudoers.d/qt
-
-sudo su -
-echo "add_drivers+=\"virtio-blk\"" >/etc/dracut.conf.d/virtio.conf
-dracut -f
-
-# Add these to /etc/polkit-default-privs.local
-org.freedesktop.udisks2.filesystem-mount yes
-org.freedesktop.udisks2.filesystem-mount-other-seat yes
-org.freedesktop.udisks2.filesystem-mount-system yes
-org.freedesktop.login1.power-off yes
-org.freedesktop.login1.power-off-ignore-inhibit yes
-org.freedesktop.login1.power-off-multiple-sessions yes
-
-# Set how DHClient creates CID for compatibility with older DHCP servers
-sudo sed -i 's/DHCLIENT_CREATE_CID=""/DHCLIENT_CREATE_CID="rfc2132"/' /etc/sysconfig/network/dhcp
-systemctl restart wicked
-
-# Create etc/sysconfig/network/ifcfg-eth1 with values:
-* BOOTPROTO='dhcp'
-* STARTMODE='auto'
-sudo ifup eth1
-
-# Register product
-# Add 'Available Extensions and Modules'
-* Basesystem Module 15 SP4 x86_64
-* Server Applications Module 15 SP4 x86_64
-
-zypper yum update
-
-* Download and run coin-setup
-
-# Fetch and run coin-setup
-Download http://coin/coin/binary/linux_386/coin-setup
-sudo ./coin-setup
-
-sudo reboot now

coin/pre-provisioning/qtci-linux-openSUSE-15.4-x86_64/README_MANUAL_INSTALLATIONS

@@ -1,42 +0,0 @@
-### OpenSUSE Leap 15.4 ###
-## KDE ##
-## In qtci-linux-openSUSE-15.4-x86_64-50 > Graphics Platform: X11 (System default) ##
-## In qtci-linux-openSUSE-15.4-x86_64-51 > Graphics Platform: Wayland (Plasma (Wayland))##
-
-# Installation #
-Language: English (US)
-Keyboard Layout: English (US)
-
-Activate online repositories during installation (yes)
-Use default selections
-
-Desktop with KDE Plasma
-
-Suggested Partitioning - default values
-
-Time Zone: UTC
-
-## Configurations ##
-Download and run coin-setup binary
-YaST - System - Services Manager - Firewalld - Stop
-# enable ssh access
-sudo rcsshd start
-Workspace Behavior - Screen locking - Lock screen automatically - unselect options
-Startup and Shutdown - Behavior - Login Screen - Select Automatically log in with session (System default)
-Add below to '$HOME/.config/autostart/coin-bootstrap-agent.desktop'
-    [Desktop Entry]
-    Type=Application
-    Exec=/usr/bin/gnome-terminal -e "/home/qt/bootstrap-agent /dev/ttyS0"
-    Hidden=false
-    X-GNOME-Autostart-enabled=true
-    Name=Coin
-Notifications
-    Critical notifications - unselect
-    Log priority notifications - unselect
-    Application progress: Show in task manager - unselect
-                          Show in notifications - unselect
-    Notification badges:  Show in task manager - unselect
-Display and Monitor - Display Configuration - 1280x800
-Power Management: Screen Energy Saving - unselect
-
-add 'qt ALL=NOPASSWD: ALL' to /etc/sudoers.d/qt

coin/pre-provisioning/qtci-macos-12.0-x86_64/README

@@ -27,12 +27,3 @@
   - Copy its content to Tier1 folder
 * Copy Tier1 folder to 101 NFS
    - Check folder access rights
-
-# How to upgrade existing Tier1 image
-
-* Open KVM connection to Intel mac Parallels host
-   - Open Parallels :: create new VM :: select macOS :: start installation but then stop it when machine boots to recovery mode
-* You should now have a virtual machine folder in /Users/qt/Parallels/<VM folder>
-* Remove files from <VM folder>/harddisk.hdd/ and copy Tier1 VM files from NFS to <VM folder>/harddisk.hdd/
-* Start the virtual machine and make needed changes
-* Copy <VM folder>/harddisk.hdd to NFS with updated number in its name

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/01-enable-dotnet-framework.ps1

@@ -1,23 +0,0 @@
-# The DirectX SDK installer requires .Net framework 3.5 which isn't installed by default
-
-# NOTE! Windows Update service need to be enabled when running this script!
-
-$netFeature = "NetFx3"
-try {
-    $netFeatureState = (Get-WindowsOptionalFeature -Online -FeatureName "$netFeature").State
-    if ($netFeatureState -eq "Enabled") {
-        Write-Host ".Net Framework is already installed"
-        exit 0
-    }
-} catch {
-    Write-Host "Could not find .Net Framework Windows feature."
-    exit 1
-}
-
-Write-Host "Installing .Net Framework client"
-try {
-    Enable-WindowsOptionalFeature -Online -FeatureName "$netFeature" -All -NoRestart
-} catch {
-    Write-Host "Could not install .Net framework"
-    exit 1
-}

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/README_MANUAL_INSTALLATIONS

@@ -1,86 +0,0 @@
-# Installation is done using Host from OpenNebula
-
-# List about manual pre-installations to Tier1 image:
-Language to install: English UK
-Time and currency format: English UK
-Keyboard or input method: United Kingdom
-Windows 10 Enterprise
-Custom: Install Windows only (advanced)
-
-# NOTE! virtio-win-0.1.204 need to be attached with virt-install
-Load driver - browse - virtio-win-0.1.204 - amd64 - w10 - Select Red Hat VirtIO SCSI controller - next - next
-
-Region: Finland
-Keyboard layout: United Kingdom
-Keyboard layout: English (United States) (US)
-
-
-* Sign-in options - Domain join instead
-   - Add user & pw
-* Location - no
-* Find my device - no
-* Diagnostic data - Required only
-* Inking and typing - no
-* Tailored expreriences - no
-* Advertising ID - no
-
-virtio-win-0.1.204.iso and run virtio-win-qt-x64
-Reboot
-
-* Enable Remote Desktop:
-   - Settings - System - Remote Desktop - On
-* Resolution set to 1280x800
-* Coin-setup:
-   - Installing Boostrap agent
-   - Disabling fast boot
-   - Disabling firewall
-   - Disabling UAC
-   - Enabling autologin
-   - Automatic login
-   - Disabling windows updates
-* Turn off Windows defender:
-   - Microsoft Defender Antivirus turned off: Open 'gpedit.msc':  'Computer Configuration' - 'Administrative Templates' - 'Windows Components' - 'Microsoft Defender Antivirus'
-      - Edit 'Turn off Microsoft Defender Antivirus' > 'Enabled' > 'Apply'
-   - Reboot on Safe mode:
-      - Open msconfig - Boot tab - enable “Safe boot“ - apply - restart
-      - In Safe mode:
-         - Take Ownership of Defender:
-            - Open properties - Right click "C:\Program Files\Windows Defender\Platform" and select 'Properties'
-            - Open Security tab - Advanced - Owner: Change - Advanced - Find now - Select Administrators - Ok - Ok
-            - Remove all Permissions: Permissions tab - Select 'Disable inheritance' - Remove all entries -Select 'Replace all child object permi…' - Apply
-         - Disable Windows defender also from RegEdit:
-            - Open regedit - Navigate to 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Service'
-            - Change the following folders the key Start to 4
-               - Sense (Windows defender advanced threat protection)
-               - WdBoot (Windows defender boot)
-               - WdFilter (Microsoft antimalware file system filter driver)
-               - WdNisDrv (Windows Defender Network Inspection Driver)
-               - WdNisSvc (Windows Defender Network Inspection Service)
-               - WinDefend (Windows Defender Antivirus Service)
-               - mpssvc (Windows Defender Firewall)
-   - NOTE! Without these step windows defender can't be disabled!
-   - Reboot back to normal mode
-* Background defrag disabled: 'Defragment And Optimize Drives' - 'change settings' - unchecked "run on a schedule"
-   - Run in terminal: 'schtasks /Delete /TN "Microsoft\Windows\Defrag\ScheduledDefrag"'
-* Time:
-   - Settings - System - Date & time - Time zone: 'Co-ordinated Universal Time'
-   - Settings - System - Date & time - "Set the time automatically: Off"
-* Regional format:
-   - Settings - Time & language - Language and region - regional format - English (United States)
-* Power saver:
-   - Settings - System - Power - Screen and sleep: set 'When plugged in, turn off my screen after' to 'never'
-* Windows search disabled:
-   - 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\Services' - 'Windows search' - stop & disable
-* Sysmain disabled:
-   - 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\Services' - 'SysMain' - stop & disable
-# Don't disable Windows Update before running '01-enable-dotnet-framework.ps1'. Script requires Windows update to be enabled!
-* Windows update:
-   - Settings - Windows Update - run available updates (Windows update2022-09 Cumulative Update for Windows 11 Version 22H2 for x64-based Systems (KB5017321))
-   - After reboot disable windows updates:
-      - 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\Services' - 'Windows updates' - stop & disable
-* Turn windows features on or off -> Check the "SMB 1.0/CIFS File Sharing Support"
-* (Restart Windows)
-* Google Chrome installed for RTA
-* Virus & threat protection settings:
-   * Check that there's no active antivirus providers
-* Activate Windows

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/disable-clean-manager.ps1

@@ -1,8 +0,0 @@
-# This script will disable automatic disk cleanup
-
-. "$PSScriptRoot\..\..\provisioning\common\windows\helpers.ps1"
-
-Run-Executable "reg.exe" "ADD `"HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\StorageSense\Parameters\StoragePolicy`" /V 04 /T REG_dWORD /D 0 /F"
-
-# Maintenance task used by the system to launch a silent auto disk cleanup when running low on free disk space.
-DisableSchedulerTask "DiskCleanup\SilentCleanup"

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/disable-ntp.ps1

@@ -1,4 +0,0 @@
-. "$PSScriptRoot\..\..\provisioning\common\windows\helpers.ps1"
-
-# Disable the NTP from syncing
-Run-Executable "w32tm.exe" "/config /syncfromflags:NO"

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/disable-schedule-tasks.ps1

@@ -1,72 +0,0 @@
-. "$PSScriptRoot\..\..\provisioning\common\windows\helpers.ps1"
-
-# This script will remove unneeded Tasks from Task Scheduler
-
-# Application Experience 'Microsoft Compatibility Appraiser' - "Collects program telemetry information if opted-in to the Microsoft Customer Experience Improvement Program."
-DisableSchedulerTask "Application Experience\Microsoft Compatibility Appraiser"
-
-# Application Experience 'ProgramDataUpdater' - "Collects program telemetry information if opted-in to the Microsoft Customer Experience Improvement Program"
-DisableSchedulerTask "Application Experience\ProgramDataUpdater"
-
-# Autochk 'Proxy' - "This task collects and uploads autochk SQM data if opted-in to the Microsoft Customer Experience Improvement Program."
-DisableSchedulerTask "Autochk\Proxy"
-
-# Chkdsk 'ProactiveScan' - "NTFS Volume Health Scan"
-DisableSchedulerTask "Chkdsk\ProactiveScan"
-
-# Chkdsk 'SyspartRepair'
-DeleteSchedulerTask "Chkdsk\SyspartRepair"
-
-# Customer Experience Improvement Program 'Consolidator' - "If the user has consented to participate in the Windows Customer Experience Improvement Program, this job collects and sends usage data to Microsoft."
-DisableSchedulerTask "Customer Experience Improvement Program\Consolidator"
-
-# Customer Experience Improvement Program 'sbCeip' - "The USB CEIP (Customer Experience Improvement Program) task collects Universal Serial Bus related statistics and information about your machine and sends it to the Windows Device Connectivity engineering group at Microsoft.  The information received is used to help improve the reliability, stability, and overall functionality of USB in Windows.  If the user has not consented to participate in Windows CEIP, this task does not do anything."
-DisableSchedulerTask "Customer Experience Improvement Program\UsbCeip"
-
-# Device Information 'Device'
-DisableSchedulerTask "Device Information\Device"
-
-# Diagnosis 'Scheduled' - "The Windows Scheduled Maintenance Task performs periodic maintenance of the computer system by fixing problems automatically or reporting them through Security and Maintenance."
-DisableSchedulerTask "Diagnosis\Scheduled"
-
-# DiskDiagnostic 'Microsoft-Windows-DiskDiagnosticDataCollector' - "The Windows Disk Diagnostic reports general disk and system information to Microsoft for users participating in the Customer Experience Program."
-DisableSchedulerTask "DiskDiagnostic\Microsoft-Windows-DiskDiagnosticDataCollector"
-
-# ExploitGuard 'ExploitGuard MDM policy Refresh' - "Task for applying changes to the machine's Exploit Protection settings."
-DisableSchedulerTask "ExploitGuard\ExploitGuard MDM policy Refresh"
-
-# Feedback/Siuf 'DmClient'
-DisableSchedulerTask "Feedback\Siuf\DmClient"
-
-# Feedback/Siuf 'DmClient'OnScenarioDownload'
-DisableSchedulerTask "Feedback\Siuf\DmClientOnScenarioDownload"
-
-# File Classification Infrastructure 'Property Definition Sync'
-DisableSchedulerTask "File Classification Infrastructure\Property Definition Sync"
-
-# InstallService 'ScanForUpdates'
-DisableSchedulerTask "InstallService\ScanForUpdates"
-
-# InstallService 'ScanForUpdatesAsUser'
-DisableSchedulerTask "InstallService\ScanForUpdatesAsUser"
-
-# LanguageComponentsInstaller  'Installation' - "Install language components that match the user's language list."
-DisableSchedulerTask "LanguageComponentsInstaller\Installation"
-
-# LanguageComponentsInstaller 'ReconcileLanguageResources' - "Install language components that match the user's language list."
-DisableSchedulerTask "LanguageComponentsInstaller\ReconcileLanguageResources"
-
-# PI 'Secure-Boot-Update' - "This task updates the Secure Boot variables."
-DisableSchedulerTask "PI\Secure-Boot-Update"
-
-# PI 'Sqm-Tasks' - "This task gathers information about the Trusted Platform Module (TPM), Secure Boot, and Measured Boot."
-DisableSchedulerTask "PI\Sqm-Tasks"
-
-# Power Efficiency Diagnotics 'AnalyzeSystem' - "This task analyzes the system looking for conditions that may cause high energy use."
-DisableSchedulerTask "PushToInstall\Registration"
-
-# Servicing 'StartComponentCleanup'
-DisableSchedulerTask "Servicing\StartComponentCleanup"
-
-# SoftwareProtectionPlatform 'SvcRestartTaskNetwork' - "This task restarts the Software Protection Platform service when a new network is detected"
-DisableSchedulerTask "SoftwareProtectionPlatform\SvcRestartTaskNetwork"

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/disable-update-orchestrator.ps1

@@ -1,14 +0,0 @@
-# Disable UpdateOrchestrator
-
-$name = "UpdateOrchestrator"
-$path = "C:\Windows\System32\Tasks\Microsoft\Windows\$name"
-
-takeown /F $path /A /R
-icacls $path /grant Administrators:F /T
-del "$path\Schedule Scan"
-del "$path\Schedule Scan Static Task"
-del "$path\UpdateModelTask"
-del "$path\USO_UxBroker"
-
-# Disable Update orchestrator service
-reg.exe ADD "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UsoSvc" /V Start /T REG_dWORD /D 4 /F

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/disable-windefender.ps1

@@ -1,57 +0,0 @@
-###########################################################################
-##
-## Copyright (C) 2020 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# Turning off win defender.
-#
-# If disabled manually, windows will automatically enable it after
-# some period of time. Disabling it speeds up the builds.
-# NOTE! Windows Defender Antivirus needs to be turned off!
-#     Open 'gpedit.msc': 'Computer Configuration' - 'Administrative Templates' - 'Windows Components' - 'Windows Defender Antivirus'
-#     Edit 'Turn off Windows Defender Antivirus' > 'Enabled' > 'Apply'
-
-. "$PSScriptRoot\..\..\provisioning\common\windows\helpers.ps1"
-
-Run-Executable "reg.exe" "ADD `"HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender`" /V DisableAntiSpyware /T REG_dWORD /D 1 /F"
-Run-Executable "reg.exe" "ADD `"HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender`" /V DisableRoutinelyTakingAction /T REG_dWORD /D 1 /F"
-
-# Disable 'QueueReporting' - "Windows Error Reporting task to process queued reports."
-DisableSchedulerTask "Windows Error Reporting\QueueReporting"
-
-# Disable WindowsUpdate from Task Scheduler
-DisableSchedulerTask "WindowsUpdate\Scheduled Start"

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/disable-windows-file-protector.ps1

@@ -1,4 +0,0 @@
-# Disable Windows File Protection
-# Windows File Protection feature in Microsoft Windows prevents programs from replacing critical Windows system files.
-
-reg.exe ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /V SFCDisable /T REG_dWORD /D 0xffffff9d /F

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/disable-windows-update-medic.ps1

@@ -1,25 +0,0 @@
-# Windows Update Medic Service (WaaSMedicSvc)'PerformRemediation' helps recover update-related services to the supported configuration.
-# WaasMedicSvc keeps re-starting Windows Update, even if it disabled manually.
-# Even Admin user don't have privileged to disable PerformRemediation from Task Scheduler which means that WaaSMedicSvc.dll need's to be removed from the system
-
-$limit = (Get-Date).AddMinutes(20)
-$path = "C:\Windows\System32\WaaSMedicAgent.exe"
-
-DO {
-    takeown /F $path
-    icacls  $path /grant Administrators:f
-    Write-host "Deleting $path"
-
-    Try {
-        del $path
-    }
-    Catch [System.UnauthorizedAccessException] {
-        Write-host "Access to the path '$path' is denied."
-        Continue
-    }
-
-    if ((Get-Date) -gt $limit) {
-        exit 1
-    }
-
-}while (Test-Path -Path "$path")

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/disable-windows-updates.ps1

@@ -1,60 +0,0 @@
-############################################################################
-##
-## Copyright (C) 2017 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script disables the automatic Windows updates
-
-$service = get-service wuauserv
-if (-not $service) {
-    Write-Host "Windows Update service not found."
-    exit 0
-}
-
-if ($service.Status -eq "Stopped") {
-    Write-Host "Windows Update service already stopped."
-} else {
-    Write-Host "Stopping Windows Update service."
-    Stop-Service -Name "wuauserv" -Force
-}
-
-$startup = Get-WmiObject Win32_Service | Where-Object {$_.Name -eq "wuauserv"} | Select -ExpandProperty "StartMode"
-if ($startup -ne "Disabled") {
-    set-service wuauserv -startup disabled
-} else {
-    Write-Host "Windows Update service startup already disabled."
-}

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/msvc2015_update.txt

@@ -1,16 +0,0 @@
-### Visual Studio 2015 ###
-Visual Studio 2015 version 14.0.25420.1 Update 3 was installed manually using ISO-image: http://ci-files01-hki.intra.qt.io/input/windows/en_visual_studio_professional_2015_with_update_3_x86_x64_dvd_8923272.iso
-(Mount the ISO-image by double clicking it and run 'vs_professional.exe')
-
-default plus following components were selected:
-* Programming Languages
-    * Visual C++
-       - Common Tools for Visual C++ 2015
-* Windows and Web Development
-   * Universal Windows App Development Tools
-      - Tools (1.4.1) and Windows SDK (10.0.14393)
-      - Windows 10 SDK (10.0.10586)
-      - Windows 10 SDK (10.0.10240)
-* Common Tools
-   -Visual Studio Extensibility Tools Update 3
-

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/msvc2019.txt

@@ -1,77 +0,0 @@
-### Visual Studio 2019 ###
-Visual Studio 2019 version 16.11.20 was installed manually using installer: http://ci-files01-hki.intra.qt.io/input/windows/vs_professional__505064367.1547034421.exe
-
-Installed MSVC-2019 Components:
-
-.NET Framework 4.5 targeting pack
-.NET Framework 4.5.1 targeting pack
-.NET Framework 4.5.2 targeting pack
-.NET Framework 4.6.1 SDK
-.NET Framework 4.6.1 targeting pack
-.NET Framework 4.6.2 SDK
-.NET Framework 4.6.2 targeting pack
-.NET Framework 4.8 SDK
-.NET Framework 4.8 targeting pack
-.NET Native
-.NET Portable Library targeting pack
-CLR data typer for SQL Sever
-Connectivity and publishing tools
-Data sources for SQL Server support
-SQL ADAL runtime
-SQL Server Command Linne Utilities
-SQL Server Data Tools
-SQL Server Express 2016 LocalDB
-SQL Server ODBC Driver
-ClickOnce Publishing
-Developer Analytics tools
-NuGet package manager
-Text Template Transformation
-C# and Visual Basic Roslyn compilers
-C++ 2019 Redistributable Update
-C++ Cmake tools for Windows
-C++/CLI support for v142 build tools (14.29-16.10)
-MSBuild
-MSVC v142 - VS 2019 C++ ARM build tools (v14.20)
-MSVC v142 - VS 2019 C++ ARM build tools (v14.29-16.10)
-MSVC v142 - VS 2019 C++ ARM64 build tools (Latest)
-MSVC v142 - VS 2019 C++ ARM64 build tools (v14.20)
-MSVC v142 - VS 2019 C++ ARM64 build tools (v14.29-16.10)
-MSVC v142 - VS 2019 C++ x64/x86 build tools (v14.20)
-MSVC v142 - VS 2019 C++ x64/x86 build tools (v14.29-16.10)
-MSVC v142 - VS 2019 C++ x64/x86 build tools (Latest)
-.NET profiling tools
-C++ profiling tools
-JavaScript diagnostics
-Just-In-Time debugger
-C# and Visual Basic
-C++ core features
-JavaSript and TypeScript language support
-Razor Language Services
-Graphics debugger and GPU profiler for DirectX
-Image and 3D model editors
-C++ ATL for latest v142 build tools (ARM)
-C++ ATL for latest v142 build tools (ARM64)
-C++ ATL for latest v142 build tools (x86 & x64)
-TypeScript 4.3 SDK
-Windows 10 SDK (10.0.16299.0)
-Windows 10 SDK (10.0.17134.0)
-Windows 10 SDK (10.0.17763.0)
-Windows 10 SDK (10.0.18362.0)
-Windows 10 SDK (10.0.19041.0)
-Windows 10 SDK (10.0.20348.0)
-Windows 11 SDK (10.0.22000.0)
-
-# NOTE! Work loads were added during installation!
-
-############################################################
-### Visual Studio 2019 build tools ###
-
-Visual studio 2019 build tools version 16.11.20 was installed manually using installer: "http://ci-files01-hki.intra.qt.io/input/windows/vs_buildtools__251503345.1575372514.exe"
- * Only default installation, no additional selections
-
-############################################################
-### Debugging tools ###
-
-* Modify 'Windows Software Development Kit - Windows 10.0.18362.1' from 'Add or remove programs'
-   - Add feature 'Debugging Tools for Windows'
-############################################################

coin/pre-provisioning/qtci-windows-10_22H2-x86_64/msvc2022.txt

@@ -1,73 +0,0 @@
-### Visual Studio 2022 Official release ###
-Visual Studio 2022 version 17.3.6 was installed manually using installer: http://ci-files01-hki.intra.qt.io/input/windows/vs_professional__msvc2022_1339502178.1525841376.exe
-
-Installed MSVC-2022 Components:
-
-.NET Framework 4.6.1 SDK
-.NET Framework 4.6.1 targeting pack
-.NET Framework 4.6.2 SDK
-.NET Framework 4.6.2 targeting pack
-.NET Framework 4.8.1 SDK
-.NET Framework 4.8.1 targeting pack
-.NET Native
-.NET Portable Library targeting pack
-CLR data typer for SQL Sever
-Connectivity and publishing tools
-Data sources for SQL Server support
-SQL Server Command Linne Utilities
-SQL Server Data Tools
-SQL Server Express 2019 LocalDB
-SQL Server ODBC Driver
-ClickOnce Publishing
-Developer Analytics tools
-NuGet package manager
-Text Template Transformation
-C# and Visual Basic Roslyn compilers
-C++ 2022 Redistributable Update
-C++ Cmake tools for Windows
-C++/CLI support for v143 build tools (14.33-17.3)
-C++/CLI support for v143 build tools (Latest)
-MSBuild
-MSVC v143 - VS 2022 C++ ARM build tools (Latest)
-MSVC v143 - VS 2022 C++ ARM build tools (v14.33-17.3)
-MSVC v143 - VS 2022 C++ ARM64 build tools (Latest)
-MSVC v143 - VS 2022 C++ ARM64 build tools (v14.33-17.3)
-MSVC v143 - VS 2022 C++ x64/x86 build tools (Latest)
-MSVC v143 - VS 2022 C++ x64/x86 build tools (v14.33-17.3)
-.NET profiling tools
-C++ profiling tools
-JavaScript diagnostics
-Just-In-Time debugger
-C# and Visual Basic
-C++ core features
-JavaSript and TypeScript language support
-Razor Language Services
-Graphics debugger and GPU profiler for DirectX
-Image and 3D model editors
-C++ ATL for latest v143 build tools (ARM)
-C++ ATL for latest v143 build tools (ARM64)
-C++ ATL for latest v143 build tools (x86 & x64)
-TypeScript 4.7 SDK
-TypeScript Server
-Windows 10 SDK (10.0.18362.0)
-Windows 10 SDK (10.0.19041.0)
-Windows 10 SDK (10.0.20348.0)
-Windows 10 SDK (10.0.22000.0)
-Windows 10 SDK (10.0.22621.0)
-Windows Universal C Runtime
-
-# NOTE! Work loads were added during installation!
-
-############################################################
-### Visual Studio 2022 build tools ###
-
- Visual studio 2022 build tools version 17.3.6 was installed manually using installer: "http://ci-files01-hki.intra.qt.io/input/windows/vs_BuildTools_msvc2022.exe"
-  * Only default installation, no additional selections
-
-############################################################
-### Debugging tools ###
-
-* Check that debugging tools are installed
-    * Modify 'Windows Software Development Kit - Windows 10.0.18362.1' from 'Add or remove programs'
-        - Add feature 'Debugging Tools for Windows'
-############################################################

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/01-enable-dotnet-framework.ps1

@@ -1,22 +0,0 @@
-# The DirectX SDK installer requires .Net framework 3.5 which isn't installed
-# by default
-
-$netFeature = "NetFx3"
-try {
-    $netFeatureState = (Get-WindowsOptionalFeature -Online -FeatureName "$netFeature").State
-    if ($netFeatureState -eq "Enabled") {
-        Write-Host ".Net Framework is already installed"
-        exit 0
-    }
-} catch {
-    Write-Host "Could not find .Net Framework Windows feature."
-    exit 1
-}
-
-Write-Host "Installing .Net Framework client"
-try {
-    Enable-WindowsOptionalFeature -Online -FeatureName "$netFeature" -All -NoRestart
-} catch {
-    Write-Host "Could not install .Net framework"
-    exit 1
-}

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/README_MANUAL_INSTALLATIONS

@@ -1,93 +0,0 @@
-# List about manual pre-installations to Tier1 image:
-
-VM Options:
-Boot options/Firmware: BIOS
-
-Language to install: English UK
-Time and currency format: English UK
-Keyboard or input method: United Kingdom
-Windows 11 Enterprise
-location: finnish
-
-
-# If note "This PC can't run Windows 11" appears
-shift + F10 - regedit - add: HKEY_LOCAL_MACHINE/SYSTEM/Setup/LabConfig
-    add DWORD value BypassTPMCheck with value 1
-    add DWORD value BypassSecureBootCheck value 1
-
-Load driver - browse - virtio-win-0.1.204 - amd64 - w10
-
-
-Region: Finland
-Keyboard layout: United Kingdom
-Keyboard layout: English (United State)
-
-
-* Sign-in options - Domain join instead
-   - Add user & pw
-* Location - no
-* Find my device - no
-* Diagnostic data - Required only
-* Inking and typing - no
-* Tailored expreriences - no
-* Advertising ID - no
-
-Reboot
-After reboot and startup open virtio-win-0.1.204.iso and run virtio-win-qt-x64
-
-* Enable Remote Desktop:
-   - Settings - System - Remote Desktop - On
-* Resolution set to 1280x800
-* Coin-setup:
-   - Installing Boostrap agent
-   - Disabling fast boot
-   - Disabling firewall
-   - Disabling UAC
-   - Enabling autologin
-   - Automatic login
-   - Disabling windows updates
-* Turn off Windows defender:
-   - Microsoft Defender Antivirus turned off: Open 'gpedit.msc':  'Computer Configuration' - 'Administrative Templates' - 'Windows Components' - 'Microsoft Defender Antivirus'
-      - Edit 'Turn off Microsoft Defender Antivirus' > 'Enabled' > 'Apply'
-   - Reboot on Safe mode:
-      - Open msconfig - Boot tab - enable “Safe boot“ - apply - restart
-      - In Safe mode:
-         - Take Ownership of Defender:
-            - Open properties - Right click "C:\Program Files\Windows Defender\Platform" and select 'Properties'
-            - Open Security tab - Advanced - Owner: Change - Advanced - Find now - Select Administrators - Ok - Ok
-            - Remove all Permissions: Permissions tab - Select 'Disable inheritance' - Remove all entries -Select 'Replace all child object permi…' - Apply
-         - Disable Windows defender also from RegEdit:
-            - Open regedit - Navigate to 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Service'
-            - Change the following folders the key Start to 4
-               - Sense (Windows defender advanced threat protection)
-               - WdBoot (Windows defender boot)
-               - WdFilter (Microsoft antimalware file system filter driver)
-               - WdNisDrv (Windows Defender Network Inspection Driver)
-               - WdNisSvc (Windows Defender Network Inspection Service)
-               - WinDefend (Windows Defender Antivirus Service)
-               - mpssvc (Windows Defender Firewall)
-   - NOTE! Without these step windows defender can't be disabled!
-   - Reboot back to normal mode
-* Background defrag disabled: 'Defragment And Optimize Drives' - 'change settings' - unchecked "run on a schedule"
-   - Run in terminal: 'schtasks /Delete /TN "Microsoft\Windows\Defrag\ScheduledDefrag"'
-* Time:
-   - Settings - System - Date & time - Time zone: 'Co-ordinated Universal Time'
-   - Settings - System - Date & time - "Set the time automatically: Off"
-* Regional format:
-   - Settings - Time & language - Language and region - regional format - English (United States)
-* Power saver:
-   - Settings - System - Power - Screen and sleep: set 'When plugged in, turn off my screen after' to 'never'
-* Windows search disabled:
-   - 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\Services' - 'Windows search' - stop & disable
-* Sysmain disabled:
-   - 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\Services' - 'SysMain' - stop & disable
-* Windows update:
-   - Settings - Windows Update - run available updates (Windows update2022-09 Cumulative Update for Windows 11 Version 22H2 for x64-based Systems (KB5017321))
-   - After reboot disable windows updates:
-      - 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\Services' - 'Windows updates' - stop & disable
-* Turn windows features on or off -> Check the "SMB 1.0/CIFS File Sharing Support"
-* (Restart Windows)
-* Google Chrome installed for RTA
-* Virus & threat protection settings:
-   * Check that there's no active antivirus providers
-* Activate Windows

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/disable-clean-manager.ps1

@@ -1,8 +0,0 @@
-# This script will disable automatic disk cleanup
-
-. "$PSScriptRoot\..\..\provisioning\common\windows\helpers.ps1"
-
-Run-Executable "reg.exe" "ADD `"HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\StorageSense\Parameters\StoragePolicy`" /V 04 /T REG_dWORD /D 0 /F"
-
-# Maintenance task used by the system to launch a silent auto disk cleanup when running low on free disk space.
-DisableSchedulerTask "DiskCleanup\SilentCleanup"

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/disable-defragment.ps1

@@ -1,78 +0,0 @@
-#############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# Windows 7 does not have Get-ScheduledTask and Unregister-ScheduledTask
-# thus needing its own version.
-Write-Host "Disabling defragmentation"
-$version = Get-CimInstance Win32_OperatingSystem | Select-Object -ExpandProperty Caption
-if ($version -like '*Windows 7*'){
-    $pi = New-Object System.Diagnostics.ProcessStartInfo
-    $pi.FileName = "C:\Windows\System32\schtasks.exe"
-    $pi.RedirectStandardError = $true
-    $pi.UseShellExecute  = $false
-    $pi.Arguments = "/Delete /TN `"\Microsoft\Windows\Defrag\ScheduledDefrag`" /F"
-    $prog = New-Object System.Diagnostics.Process
-    $prog.StartInfo = $pi
-    $prog.Start() | Out-Null
-    $err = $prog.StandardError.ReadToEnd()
-    $prog.WaitForExit()
-    if ($prog.ExitCode -eq 0){
-        Write-Host "Scheduled defragmentation removed"
-    } else {
-        if ($err -like '*cannot find the file*'){
-            Write-Host "No scheduled defragmentation task found"
-            exit 0
-        } else {
-            Write-Host "Error while deleting scheduled defragmentation task: $err"
-        }
-    }
-}
-else {
-    try {
-        $state = (Get-ScheduledTask -ErrorAction Stop -TaskName "ScheduledDefrag").State
-        Write-Host "Scheduled defragmentation task found in state: $state"
-    }
-    catch {
-        Write-Host "No scheduled defragmentation task found"
-        exit 0
-    }
-    Write-Host "Unregistering scheduled defragmentation task"
-    Unregister-ScheduledTask -ErrorAction Stop -Confirm:$false -TaskName ScheduledDefrag
-    Write-Host "Scheduled Defragmentation task was cancelled"
-}

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/disable-ntp.ps1

@@ -1,4 +0,0 @@
-. "$PSScriptRoot\..\..\provisioning\common\windows\helpers.ps1"
-
-# Disable the NTP from syncing
-Run-Executable "w32tm.exe" "/config /syncfromflags:NO"

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/disable-schedule-tasks.ps1

@@ -1,72 +0,0 @@
-. "$PSScriptRoot\..\..\provisioning\common\windows\helpers.ps1"
-
-# This script will remove unneeded Tasks from Task Scheduler
-
-# Application Experience 'Microsoft Compatibility Appraiser' - "Collects program telemetry information if opted-in to the Microsoft Customer Experience Improvement Program."
-DisableSchedulerTask "Application Experience\Microsoft Compatibility Appraiser"
-
-# Application Experience 'ProgramDataUpdater' - "Collects program telemetry information if opted-in to the Microsoft Customer Experience Improvement Program"
-DisableSchedulerTask "Application Experience\ProgramDataUpdater"
-
-# Autochk 'Proxy' - "This task collects and uploads autochk SQM data if opted-in to the Microsoft Customer Experience Improvement Program."
-DisableSchedulerTask "Autochk\Proxy"
-
-# Chkdsk 'ProactiveScan' - "NTFS Volume Health Scan"
-DisableSchedulerTask "Chkdsk\ProactiveScan"
-
-# Chkdsk 'SyspartRepair'
-DeleteSchedulerTask "Chkdsk\SyspartRepair"
-
-# Customer Experience Improvement Program 'Consolidator' - "If the user has consented to participate in the Windows Customer Experience Improvement Program, this job collects and sends usage data to Microsoft."
-DisableSchedulerTask "Customer Experience Improvement Program\Consolidator"
-
-# Customer Experience Improvement Program 'sbCeip' - "The USB CEIP (Customer Experience Improvement Program) task collects Universal Serial Bus related statistics and information about your machine and sends it to the Windows Device Connectivity engineering group at Microsoft.  The information received is used to help improve the reliability, stability, and overall functionality of USB in Windows.  If the user has not consented to participate in Windows CEIP, this task does not do anything."
-DisableSchedulerTask "Customer Experience Improvement Program\UsbCeip"
-
-# Device Information 'Device'
-DisableSchedulerTask "Device Information\Device"
-
-# Diagnosis 'Scheduled' - "The Windows Scheduled Maintenance Task performs periodic maintenance of the computer system by fixing problems automatically or reporting them through Security and Maintenance."
-DisableSchedulerTask "Diagnosis\Scheduled"
-
-# DiskDiagnostic 'Microsoft-Windows-DiskDiagnosticDataCollector' - "The Windows Disk Diagnostic reports general disk and system information to Microsoft for users participating in the Customer Experience Program."
-DisableSchedulerTask "DiskDiagnostic\Microsoft-Windows-DiskDiagnosticDataCollector"
-
-# ExploitGuard 'ExploitGuard MDM policy Refresh' - "Task for applying changes to the machine's Exploit Protection settings."
-DisableSchedulerTask "ExploitGuard\ExploitGuard MDM policy Refresh"
-
-# Feedback/Siuf 'DmClient'
-DisableSchedulerTask "Feedback\Siuf\DmClient"
-
-# Feedback/Siuf 'DmClient'OnScenarioDownload'
-DisableSchedulerTask "Feedback\Siuf\DmClientOnScenarioDownload"
-
-# File Classification Infrastructure 'Property Definition Sync'
-DisableSchedulerTask "File Classification Infrastructure\Property Definition Sync"
-
-# InstallService 'ScanForUpdates'
-DisableSchedulerTask "InstallService\ScanForUpdates"
-
-# InstallService 'ScanForUpdatesAsUser'
-DisableSchedulerTask "InstallService\ScanForUpdatesAsUser"
-
-# LanguageComponentsInstaller  'Installation' - "Install language components that match the user's language list."
-DisableSchedulerTask "LanguageComponentsInstaller\Installation"
-
-# LanguageComponentsInstaller 'ReconcileLanguageResources' - "Install language components that match the user's language list."
-DisableSchedulerTask "LanguageComponentsInstaller\ReconcileLanguageResources"
-
-# PI 'Secure-Boot-Update' - "This task updates the Secure Boot variables."
-DisableSchedulerTask "PI\Secure-Boot-Update"
-
-# PI 'Sqm-Tasks' - "This task gathers information about the Trusted Platform Module (TPM), Secure Boot, and Measured Boot."
-DisableSchedulerTask "PI\Sqm-Tasks"
-
-# Power Efficiency Diagnotics 'AnalyzeSystem' - "This task analyzes the system looking for conditions that may cause high energy use."
-DisableSchedulerTask "PushToInstall\Registration"
-
-# Servicing 'StartComponentCleanup'
-DisableSchedulerTask "Servicing\StartComponentCleanup"
-
-# SoftwareProtectionPlatform 'SvcRestartTaskNetwork' - "This task restarts the Software Protection Platform service when a new network is detected"
-DisableSchedulerTask "SoftwareProtectionPlatform\SvcRestartTaskNetwork"

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/disable-update-orchestrator.ps1

@@ -1,13 +0,0 @@
-# Disable UpdateOrchestrator
-
-$name = "UpdateOrchestrator"
-$path = "C:\Windows\System32\Tasks\Microsoft\Windows\$name"
-
-takeown /F $path /A /R
-icacls $path /grant Administrators:F /T
-del "$path\Schedule Scan"
-del "$path\Schedule Scan Static Task"
-del "$path\USO_UxBroker"
-
-# Disable Update orchestrator service
-reg.exe ADD "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UsoSvc" /V Start /T REG_dWORD /D 4 /F

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/disable-windefender.ps1

@@ -1,57 +0,0 @@
-###########################################################################
-##
-## Copyright (C) 2020 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# Turning off win defender.
-#
-# If disabled manually, windows will automatically enable it after
-# some period of time. Disabling it speeds up the builds.
-# NOTE! Windows Defender Antivirus needs to be turned off!
-#     Open 'gpedit.msc': 'Computer Configuration' - 'Administrative Templates' - 'Windows Components' - 'Windows Defender Antivirus'
-#     Edit 'Turn off Windows Defender Antivirus' > 'Enabled' > 'Apply'
-
-. "$PSScriptRoot\..\..\provisioning\common\windows\helpers.ps1"
-
-Run-Executable "reg.exe" "ADD `"HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender`" /V DisableAntiSpyware /T REG_dWORD /D 1 /F"
-Run-Executable "reg.exe" "ADD `"HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender`" /V DisableRoutinelyTakingAction /T REG_dWORD /D 1 /F"
-
-# Disable 'QueueReporting' - "Windows Error Reporting task to process queued reports."
-DisableSchedulerTask "Windows Error Reporting\QueueReporting"
-
-# Disable WindowsUpdate from Task Scheduler
-DisableSchedulerTask "WindowsUpdate\Scheduled Start"

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/disable-windows-file-protector.ps1

@@ -1,4 +0,0 @@
-# Disable Windows File Protection
-# Windows File Protection feature in Microsoft Windows prevents programs from replacing critical Windows system files.
-
-reg.exe ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /V SFCDisable /T REG_dWORD /D 0xffffff9d /F

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/disable-windows-update-medic.ps1

@@ -1,25 +0,0 @@
-# Windows Update Medic Service (WaaSMedicSvc)'PerformRemediation' helps recover update-related services to the supported configuration.
-# WaasMedicSvc keeps re-starting Windows Update, even if it disabled manually.
-# Even Admin user don't have privileged to disable PerformRemediation from Task Scheduler which means that WaaSMedicSvc.dll need's to be removed from the system
-
-$limit = (Get-Date).AddMinutes(20)
-$path = "C:\Windows\System32\WaaSMedicSvc.dll"
-
-DO {
-    takeown /F $path
-    icacls  $path /grant Administrators:f
-    Write-host "Deleting $path"
-
-    Try {
-        del $path
-    }
-    Catch [System.UnauthorizedAccessException] {
-        Write-host "Access to the path '$path' is denied."
-        Continue
-    }
-
-    if ((Get-Date) -gt $limit) {
-        exit 1
-    }
-
-}while (Test-Path -Path "$path")

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/disable-windows-updates.ps1

@@ -1,60 +0,0 @@
-############################################################################
-##
-## Copyright (C) 2017 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script disables the automatic Windows updates
-
-$service = get-service wuauserv
-if (-not $service) {
-    Write-Host "Windows Update service not found."
-    exit 0
-}
-
-if ($service.Status -eq "Stopped") {
-    Write-Host "Windows Update service already stopped."
-} else {
-    Write-Host "Stopping Windows Update service."
-    Stop-Service -Name "wuauserv" -Force
-}
-
-$startup = Get-WmiObject Win32_Service | Where-Object {$_.Name -eq "wuauserv"} | Select -ExpandProperty "StartMode"
-if ($startup -ne "Disabled") {
-    set-service wuauserv -startup disabled
-} else {
-    Write-Host "Windows Update service startup already disabled."
-}

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/msvc2019.txt

@@ -1,77 +0,0 @@
-### Visual Studio 2019 ###
-Visual Studio 2019 version 16.11.19 was installed manually using installer: http://ci-files01-hki.intra.qt.io/input/windows/vs_professional__505064367.1547034421.exe
-
-Installed MSVC-2019 Components:
-
-.NET Framework 4.5 targeting pack
-.NET Framework 4.5.1 targeting pack
-.NET Framework 4.5.2 targeting pack
-.NET Framework 4.6.1 SDK
-.NET Framework 4.6.1 targeting pack
-.NET Framework 4.6.2 SDK
-.NET Framework 4.6.2 targeting pack
-.NET Framework 4.8 SDK
-.NET Framework 4.8 targeting pack
-.NET Native
-.NET Portable Library targeting pack
-CLR data typer for SQL Sever
-Connectivity and publishing tools
-Data sources for SQL Server support
-SQL ADAL runtime
-SQL Server Command Linne Utilities
-SQL Server Data Tools
-SQL Server Express 2016 LocalDB
-SQL Server ODBC Driver
-ClickOnce Publishing
-Developer Analytics tools
-NuGet package manager
-Text Template Transformation
-C# and Visual Basic Roslyn compilers
-C++ 2019 Redistributable Update
-C++ Cmake tools for Windows
-C++/CLI support for v142 build tools (14.29-16.10)
-MSBuild
-MSVC v142 - VS 2019 C++ ARM build tools (v14.20)
-MSVC v142 - VS 2019 C++ ARM build tools (v14.29-16.10)
-MSVC v142 - VS 2019 C++ ARM64 build tools (Latest)
-MSVC v142 - VS 2019 C++ ARM64 build tools (v14.20)
-MSVC v142 - VS 2019 C++ ARM64 build tools (v14.29-16.10)
-MSVC v142 - VS 2019 C++ x64/x86 build tools (v14.20)
-MSVC v142 - VS 2019 C++ x64/x86 build tools (v14.29-16.10)
-MSVC v142 - VS 2019 C++ x64/x86 build tools (Latest)
-.NET profiling tools
-C++ profiling tools
-JavaScript diagnostics
-Just-In-Time debugger
-C# and Visual Basic
-C++ core features
-JavaSript and TypeScript language support
-Razor Language Services
-Graphics debugger and GPU profiler for DirectX
-Image and 3D model editors
-C++ ATL for latest v142 build tools (ARM)
-C++ ATL for latest v142 build tools (ARM64)
-C++ ATL for latest v142 build tools (x86 & x64)
-TypeScript 4.3 SDK
-Windows 10 SDK (10.0.16299.0)
-Windows 10 SDK (10.0.17134.0)
-Windows 10 SDK (10.0.17763.0)
-Windows 10 SDK (10.0.18362.0)
-Windows 10 SDK (10.0.19041.0)
-Windows 10 SDK (10.0.20348.0)
-Windows 11 SDK (10.0.22000.0)
-
-# NOTE! Work loads were added during installation!
-
-############################################################
-### Visual Studio 2019 build tools ###
-
-Visual studio 2019 build tools version 16.11.19 was installed manually using installer: "http://ci-files01-hki.intra.qt.io/input/windows/vs_buildtools__251503345.1575372514.exe"
- * Only default installation, no additional selections
-
-############################################################
-### Debugging tools ###
-
-* Modify 'Windows Software Development Kit - Windows 10.0.18362.1' from 'Add or remove programs'
-   - Add feature 'Debugging Tools for Windows'
-############################################################

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/msvc2022.txt

@@ -1,73 +0,0 @@
-### Visual Studio 2022 Official release ###
-Visual Studio 2022 version 17.3.5 was installed manually using installer: http://ci-files01-hki.intra.qt.io/input/windows/vs_professional__msvc2022_1339502178.1525841376.exe
-
-Installed MSVC-2022 Components:
-
-.NET Framework 4.6.1 SDK
-.NET Framework 4.6.1 targeting pack
-.NET Framework 4.6.2 SDK
-.NET Framework 4.6.2 targeting pack
-.NET Framework 4.8 SDK
-.NET Framework 4.8 targeting pack
-.NET Native
-.NET Portable Library targeting pack
-CLR data typer for SQL Sever
-Connectivity and publishing tools
-Data sources for SQL Server support
-SQL Server Command Linne Utilities
-SQL Server Data Tools
-SQL Server Express 2019 LocalDB
-SQL Server ODBC Driver
-ClickOnce Publishing
-Developer Analytics tools
-NuGet package manager
-Text Template Transformation
-C# and Visual Basic Roslyn compilers
-C++ 2022 Redistributable Update
-C++ Cmake tools for Windows
-C++/CLI support for v143 build tools (14.30-17.0)
-C++/CLI support for v143 build tools (Latest)
-MSBuild
-MSVC v143 - VS 2022 C++ ARM build tools (Latest)
-MSVC v143 - VS 2022 C++ ARM build tools (v14.30-17.0)
-MSVC v143 - VS 2022 C++ ARM64 build tools (Latest)
-MSVC v143 - VS 2022 C++ ARM64 build tools (v14.30-17.0)
-MSVC v143 - VS 2022 C++ x64/x86 build tools (Latest)
-MSVC v143 - VS 2022 C++ x64/x86 build tools (v14.30-17.0)
-.NET profiling tools
-C++ profiling tools
-JavaScript diagnostics
-Just-In-Time debugger
-C# and Visual Basic
-C++ core features
-JavaSript and TypeScript language support
-Razor Language Services
-Graphics debugger and GPU profiler for DirectX
-Image and 3D model editors
-C++ ATL for latest v143 build tools (ARM)
-C++ ATL for latest v143 build tools (ARM64)
-C++ ATL for latest v143 build tools (x86 & x64)
-TypeScript 4.7 SDK
-TypeScript Server
-Windows 10 SDK (10.0.18362.0)
-Windows 10 SDK (10.0.19041.0)
-Windows 10 SDK (10.0.20348.0)
-Windows 11 SDK (10.0.22000.0)
-Windows 11 SDK (10.0.22621.0)
-Windows Universal C Runtime
-
-# NOTE! Work loads were added during installation!
-
-############################################################
-### Visual Studio 2022 build tools ###
-
- Visual studio 2022 build tools version 17.3.5 was installed manually using installer: "http://ci-files01-hki.intra.qt.io/input/windows/vs_BuildTools_msvc2022.exe"
-  * Only default installation, no additional selections
-
-############################################################
-### Debugging tools ###
-
-* Check that debugging tools are installed
-    * Modify 'Windows Software Development Kit - Windows 10.0.18362.1' from 'Add or remove programs'
-        - Add feature 'Debugging Tools for Windows'
-############################################################

coin/pre-provisioning/qtci-windows-11_22H2-x86_64/virtio.txt

@@ -1,31 +0,0 @@
-Install virtio
-
-Our vanilla images are pre-installed in VMware where we have networking available. In KVM we can
-use the VMware installed vmxnet3 NIC to fetch VirtIO drivers, install them, and only then switch
-to using the VirtIO NIC in KVM.
-
-NOTE! Install these Virtio drivers in Opennebula when using Windows 10 20H2
-* Download https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/archive-virtio/virtio-win-0.1.185-2/virtio-win-0.1.185.iso
-    cache: http://ci-files01-hki.intra.qt.io/input/windows/virtio/virtio-win-0.1.185.iso
-* Mount virtio-win-0.1.185.iso by double clicking it.
-* Right click 'E:\NetKVM\w10\amd64\netkvm.inf' and select Install
-* Right click 'E:\Balloon\w10\amd64\balloon.inf' and select Install
-* Right click 'E:\vioscsi\w10\amd64\vioscsi.inf' and select Install
-* Right click 'E:\vioserial\w10\amd64\vioser.inf' and select Install
-* Navigate to E:\guest-agent directory and double click qemu-ga-x86_64
-
-Because vioscsi does not install the entries in windows registry before we actually
-have a VirtIO device installed, and we can't boot with a VirtIO device before
-the driver is installed, we have to blindly install the registry entries:
-
-* Download https://bugreports.qt.io/secure/attachment/95685/95685_vioscsi.reg
-    cache: http://ci-files01-hki.intra.qt.io/input/windows/virtio/vioscsi.reg
-
-However, we've seen that the Owner in the registry can be wrong. This entry
-sets it to oem11.inf, but we've seen it be oem10.inf in one case and it has
-to be corrected so that it will boot from the VirtIO driver. This was found out
-by having 2 devices installed simultaneously and having the drivers install
-properly into the registry.
-
-* Eject the mounting
-* Remove downloaded virtio-win-0.1.171.iso

coin/provisioning/common/linux/android_linux.sh

@@ -55,20 +55,18 @@ source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 targetFolder="/opt/android"
 sdkTargetFolder="$targetFolder/sdk"
 
-sudo mkdir -p $sdkTargetFolder
-
 basePath="http://ci-files01-hki.intra.qt.io/input/android"
 
 toolsVersion="2.1"
 toolsFile="commandlinetools-linux-6609375_latest.zip"
-ndkVersionLatest="r25b"
-ndkVersionDefault="r23b"
+ndkVersion="r23b"
+ndkFile="android-ndk-$ndkVersion-linux.zip"
 sdkBuildToolsVersion="31.0.0"
 sdkApiLevel="android-31"
 
 toolsSha1="9172381ff070ee2a416723c1989770cf4b0d1076"
-ndkSha1Latest="e27dcb9c8bcaa77b78ff68c3f23abcf6867959eb"
-ndkSha1Default="f47ec4c4badd11e9f593a8450180884a927c330d"
+ndkSha1="f47ec4c4badd11e9f593a8450180884a927c330d"
+
 # Android automotive
 sdkApiLevelAutomovie="android-30"
 androidAutomotive11Url="$basePath/${sdkApiLevelAutomovie}_automotive.tar.gz"
@@ -77,37 +75,18 @@ android11Sha="4a5cd2bea7ce323b724c3ff1faab13d99f9d2be9"
 
 toolsTargetFile="/tmp/$toolsFile"
 toolsSourceFile="$basePath/$toolsFile"
+ndkTargetFile="/tmp/$ndkFile"
+ndkSourceFile="$basePath/$ndkFile"
 
-echo "Download and unzip Android SDK"
 DownloadURL "$toolsSourceFile" "$toolsSourceFile" "$toolsSha1" "$toolsTargetFile"
+DownloadURL "$ndkSourceFile" "$ndkSourceFile" "$ndkSha1" "$ndkTargetFile"
+echo "Unzipping Android NDK to '$targetFolder'"
+sudo unzip -q "$ndkTargetFile" -d "$targetFolder"
 echo "Unzipping Android Tools to '$sdkTargetFolder'"
 sudo unzip -q "$toolsTargetFile" -d "$sdkTargetFolder"
+rm "$ndkTargetFile"
 rm "$toolsTargetFile"
 
-function InstallNdk() {
-
-    ndkVersion=$1
-    ndkSha1=$2
-
-    if [[ ! -d $targetFolder/android-ndk-$ndkVersion ]]; then
-
-        ndkFile="android-ndk-$ndkVersion-linux.zip"
-        ndkTargetFile="/tmp/$ndkFile"
-        ndkSourceFile="$basePath/$ndkFile"
-
-        DownloadURL "$ndkSourceFile" "$ndkSourceFile" "$ndkSha1" "$ndkTargetFile"
-        echo "Unzipping Android NDK to '$targetFolder'"
-        sudo unzip -q "$ndkTargetFile" -d "$targetFolder"
-        rm "$ndkTargetFile"
-    fi
-
-}
-
-InstallNdk $ndkVersionDefault $ndkSha1Default
-SetEnvVar "ANDROID_NDK_ROOT_DEFAULT" "$targetFolder/android-ndk-$ndkVersionDefault"
-InstallNdk $ndkVersionLatest $ndkSha1Latest
-SetEnvVar "ANDROID_NDK_ROOT_LATEST" "$targetFolder/android-ndk-$ndkVersionLatest"
-
 echo "Changing ownership of Android files."
 if uname -a |grep -q "el7"; then
     sudo chown -R qt:wheel "$targetFolder"
@@ -143,6 +122,7 @@ echo "Checking the contents of Android SDK..."
 ls -l "$sdkTargetFolder"
 
 SetEnvVar "ANDROID_SDK_ROOT" "$sdkTargetFolder"
+SetEnvVar "ANDROID_NDK_ROOT" "$targetFolder/android-ndk-$ndkVersion"
 SetEnvVar "ANDROID_NDK_HOST" "linux-x86_64"
 SetEnvVar "ANDROID_API_VERSION" "$sdkApiLevel"
 

coin/provisioning/common/linux/bootstrap-autostart.sh

@@ -1,126 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2022 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-set -ex
-
-# Make bootstap agent run in background without terminal view
-# Terminal view can cause issues with Autotests
-
-# Create shell wrapper to pass environment variables
-wrapper="${HOME}/bootstrap-agent.sh"
-autostart_folder="${HOME}/.config/autostart"
-# This directory should exist. Created in base image (tier 1)
-mkdir -p ${autostart_folder}
-
-# Create autostart desktop file and shell wrapper
-sudo tee ${autostart_folder}/coin-bootstrap-agent.desktop <<"EOF"
-[Desktop Entry]
-Type=Application
-Exec=/home/qt/bootstrap-agent.sh
-Hidden=false
-X-GNOME-Autostart-enabled=true
-Name=Coin
-EOF
-
-sudo tee $wrapper <<"EOF"
-#!/bin/sh
-# Wait for network to come up
-x=0
-while ! cat "/etc/resolv.conf" | grep -v "#" | grep "nameserver" > /dev/null ; do
-    echo "(WW) wating for network ($x/20)..." >> /home/qt/bootstrap-agent.txt
-    x=$((x+1))
-    sleep 1
-    if [ "$x" -gt 20 ]; then
-        echo "(EE) netowrk down. Exiting bootstrap." >> /home/qt/bootstrap-agent.txt
-        exit 1
-    fi
-done
-echo "(**) network found." >>  /home/qt/bootstrap-agent.txt
-
-# Wait for context to be mounted
-x=0
-while ! ([ -f "/media/qt/CONTEXT/context.sh" ] || [ -f "/media/CONTEXT/context.sh" ] || [ -f "/run/media/qt/CONTEXT/context.sh" ]); do
-    echo "(WW) waiting for context file to be mounted ($x/20)..." >> /home/qt/bootstrap-agent.txt
-    x=$((x+1))
-    sleep 1
-    if [ "$x" -gt 20 ]; then
-        echo "(WW) no context file found. Mounting manually." >> /home/qt/bootstrap-agent.txt
-        break
-    fi
-done
-
-# establish mount path (differs per distro)
-if ! ([ -f "/media/qt/CONTEXT/context.sh" ] || [ -f "/media/CONTEXT/context.sh" ] || [ -f "/run/media/qt/CONTEXT/context.sh" ]); then
-    MOUNTPATH="invalid"
-    if [ -d "/run/media/qt/CONTEXT" ]; then
-            MOUNTPATH="/run/media/qt/CONTEXT"
-    fi
-    if [ -d "/media/qt/CONTEXT" ]; then
-            MOUNTPATH="/media/qt/CONTEXT"
-    fi
-    if [ -d "/media/CONTEXT" ]; then
-            MOUNTPATH="/media/CONTEXT"
-    fi
-
-    # try mounting if unmounted
-    if [ -d "$MOUNTPATH" ]; then
-        if ! mount | grep "$MOUNTPATH" > /dev/null ; then
-            echo "(WW) context file not mounted..." >> /home/qt/bootstrap-agent.txt
-            echo "(WW) waiting 1 minute" >> /home/qt/bootstrap-agent.txt
-            sleep 60
-            echo "(**) mount /dev/sr0 $MOUNTPATH" >> /home/qt/bootstrap-agent.txt
-            sudo mount -r /dev/sr0 $MOUNTPATH
-        fi
-    fi
-fi
-
-if ([ -f "/media/qt/CONTEXT/context.sh" ] || [ -f "/media/CONTEXT/context.sh" ] || [ -f "/run/media/qt/CONTEXT/context.sh" ]); then
-    echo "(**) context found." >>  /home/qt/bootstrap-agent.txt
-else
-    echo "(EE) context not found. Starting bootstrap anyway." >>  /home/qt/bootstrap-agent.txt
-fi
-
-/home/qt/bootstrap-agent /dev/ttyS0
-EOF
-
-# set owner and permissions
-sudo chown qt:users $wrapper
-sudo chmod 755 $wrapper

coin/provisioning/common/linux/cmake_linux.sh

@@ -48,11 +48,11 @@ source "${BASH_SOURCE%/*}/../unix/InstallFromCompressedFileFromURL.sh"
 # shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
-majorminorversion="3.24"
-version="3.24.2"
+majorminorversion="3.21"
+version="3.21.3"
 PrimaryUrl="http://ci-files01-hki.intra.qt.io/input/cmake/cmake-$version-linux-x86_64.tar.gz"
 AltUrl="https://cmake.org/files/v$majorminorversion/cmake-$version-linux-x86_64.tar.gz"
-SHA1="12627c808674ee5f5bd3a6982176613bbd3ad9db"
+SHA1="5461d4f066a728445e0b6be0e4d250b828323908"
 targetFolder="/opt/cmake-$version"
 appPrefix="cmake-$version-linux-x86_64"
 

coin/provisioning/common/linux/docker.sh

@@ -2,7 +2,7 @@
 
 #############################################################################
 ##
-## Copyright (C) 2023 The Qt Company Ltd.
+## Copyright (C) 2019 The Qt Company Ltd.
 ## Contact: https://www.qt.io/licensing/
 ##
 ## This file is part of the provisioning scripts of the Qt Toolkit.
@@ -48,12 +48,12 @@ PROVISIONING_DIR="$(dirname "$0")/../../"
 
 
 localRepo=http://ci-files01-hki.intra.qt.io/input/docker
-upstreamRepo=https://download.docker.com/linux/ubuntu/dists/focal/pool/stable/amd64/
+upstreamRepo=https://download.docker.com/linux/ubuntu/dists/bionic/pool/stable/amd64
 
 echo '
-    2666840157bab3b77a850236fbf323c423fb564a containerd.io_1.6.9-1_amd64.deb
-    ec6a1ad99b19b6a674349fb13bcc10d62c54c404 docker-ce_23.0.0-1~ubuntu.20.04~focal_amd64.deb
-    130774916fa7e2c9997b8fcb4e7696a343f12fb0 docker-ce-cli_23.0.0-1~ubuntu.20.04~focal_amd64.deb
+    f4c941807310e3fa470dddfb068d599174a3daec containerd.io_1.2.10-3_amd64.deb
+    ee640d9258fd4d3f4c7017ab2a71da63cbbead55 docker-ce_19.03.4~3-0~ubuntu-bionic_amd64.deb
+    09402bf5dac40f0c50f1071b17f38f6584a42ad1 docker-ce-cli_19.03.4~3-0~ubuntu-bionic_amd64.deb
 ' \
     | xargs -n2 | while read  sha f
 do
@@ -68,11 +68,10 @@ sudo docker --version
 
 # Download and install the docker-compose extension from https://github.com/docker/compose/releases
 f=docker-compose-$(uname -s)-$(uname -m)
-dockerComposeVersion="v2.15.1"
 DownloadURL  \
-    $localRepo/$f-${dockerComposeVersion}  \
-    https://github.com/docker/compose/releases/download/${dockerComposeVersion}/$f \
-    bcfd9ea51dee4c19dccdfaeef0e7956ef68bf14f3d175933742061a7271ef0f5
+    $localRepo/$f-1.24.1  \
+    https://github.com/docker/compose/releases/download/1.24.1/$f \
+    cfb3439956216b1248308141f7193776fcf4b9c9b49cbbe2fb07885678e2bb8a
 sudo install -m 755 ./docker-compose* /usr/local/bin/docker-compose
 sudo docker-compose --version
 rm ./docker-compose*

coin/provisioning/common/linux/install-ffmpeg.sh

@@ -1,77 +0,0 @@
-#!/usr/bin/env bash
-
-############################################################################
-##
-## Copyright (C) 2022 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script will build and install FFmpeg static libs
-set -ex
-
-# shellcheck source=../unix/InstallFromCompressedFileFromURL.sh
-source "${BASH_SOURCE%/*}/../unix/InstallFromCompressedFileFromURL.sh"
-# shellcheck source=../unix/SetEnvVar.sh
-source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
-
-ffmpeg_config_options=$(cat "${BASH_SOURCE%/*}/../shared/ffmpeg_config_options.txt")
-
-if [ -f /etc/redhat-release ]
-then
-  sudo sudo yum -y install yasm
-else
-  sudo apt install yasm
-fi
-
-version="n5.0"
-ffmpeg_name="FFmpeg-$version"
-
-url_cached="http://ci-files01-hki.intra.qt.io/input/ffmpeg/$version.tar.gz"
-url_public="https://github.com/FFmpeg/FFmpeg/archive/refs/tags/$version.tar.gz"
-sha1="1a979876463fd81e481d53ceb3cc117f0fce8521"
-
-target_folder="$HOME"
-app_prefix=""
-
-InstallFromCompressedFileFromURL "$url_cached" "$url_public" "$sha1" "$target_folder" "$app_prefix"
-
-mkdir -p "$target_folder/$ffmpeg_name/build"
-pushd "$target_folder/$ffmpeg_name/build"
-../configure $ffmpeg_config_options --prefix=installed
-make install -j
-popd
-
-SetEnvVar "FFMPEG_DIR" "$target_folder/$ffmpeg_name/build/installed"

coin/provisioning/common/linux/install-git.sh

@@ -42,17 +42,17 @@ source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
 # shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
-version="2.36.1"
+version="2.31.1"
 officialUrl="https://github.com/git/git/archive/refs/tags/v$version.tar.gz"
 cachedUrl="http://ci-files01-hki.intra.qt.io/input/git/git-$version.tar.gz"
 targetFile="/tmp/git-$version.tar.gz"
-sha="a17c11da2968f280a13832d97f48e9039edac354"
+sha="859dbeaefd9cb6c590050b9cc4b83cb51e412410"
 DownloadURL "$cachedUrl" "$officialUrl" "$sha" "$targetFile"
 sourceDir="/tmp/git-$version-source"
 mkdir $sourceDir
 tar -xzf "$targetFile" -C $sourceDir
 
-cd "$sourceDir/git-$version"
+cd "$sourceDir/git-2.31.1"
 installDir="$HOME/git"
 make configure
 ./configure --prefix=$installDir

coin/provisioning/common/linux/integrity.sh

@@ -48,9 +48,9 @@ source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
 # shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
-urlToolchainEs7="http://ci-files01-hki.intra.qt.io/input/integrity/integrity_toolchain_es7_05102022.zip"
+urlToolchainEs7="http://ci-files01-hki.intra.qt.io/input/integrity/integrity_toolchain_es7_20042022.zip"
 urlLibeglmegapack="http://ci-files01-hki.intra.qt.io/input/integrity/integrity_libeglmegapack.zip"
-SHA1_toolchainEs7="a95e11996d89218ac93493484e483d169976f565"
+SHA1_toolchainEs7="9e05277ec6a4610d4df565c3fbe24b9ce2a1f057"
 SHA1_Libeglmegapack="7f8ca64132eaea66202ea8db7f71f3300aab0777"
 targetFolder="$HOME"
 appPrefix=""

coin/provisioning/common/linux/qnx_qemu_build_files/local/opt_scripts/opt_nfs_qt

@@ -25,7 +25,7 @@ function configure()
         cat >output/option_files/post_start.opt_nfs <<EOF
 
 echo "---> Starting NFS"
-STARTU_P(fs_nfs3_t,__FS_NFS3_ID__) fs-nfs3 -t 172.31.1.1:$OPT_NFS_QT $OPT_NFS_QT
+STARTU_P(fs_nfs3_t,__FS_NFS3_ID__) fs-nfs3 172.31.1.1:$OPT_NFS_QT $OPT_NFS_QT
 EOF
     fi
 

coin/provisioning/common/macos/android.sh

@@ -1,112 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2022 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script install Android sdk and ndk.
-
-# It also runs update for SDK API, latest SDK tools, latest platform-tools and build-tools version
-
-set -ex
-
-# shellcheck source=../common/unix/SetEnvVar.sh
-source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
-
-targetFolder="/opt/android"
-sdkTargetFolder="$targetFolder/sdk"
-
-basePath="/net/ci-files01-hki.intra.qt.io/hdd/www/input/android"
-
-toolsVersion="2.1"
-# toolsFile dertermines tools version
-toolsFile="commandlinetools-mac-6609375_latest.zip"
-
-ndkVersionLatest="r25b"
-ndkVersionDefault="r23b"
-sdkBuildToolsVersion="31.0.0"
-# this is compile sdk version
-sdkApiLevel="android-31"
-
-toolsSourceFile="$basePath/$toolsFile"
-
-function InstallNdk() {
-
-    ndkVersion=$1
-
-    if [[ ! -d "${targetFolder}/android-ndk-${ndkVersion}" ]]; then
-        echo "Unzipping Android NDK $ndkVersion to '${targetFolder}'"
-        ndkSourceFile="$basePath/android-ndk-$ndkVersion-darwin*.zip"
-        sudo unzip -q "$ndkSourceFile" -d "$targetFolder"
-    fi
-
-}
-
-InstallNdk $ndkVersionDefault
-InstallNdk $ndkVersionLatest
-
-echo "Unzipping Android Tools to '$sdkTargetFolder'"
-sudo unzip -q "$toolsSourceFile" -d "$sdkTargetFolder"
-
-echo "Changing ownership of Android files."
-sudo chown -R qt:wheel "$targetFolder"
-
-# Run the following command under `eval` or `sh -c` so that the shell properly splits it
-sdkmanager_no_progress_bar_cmd="tr '\r' '\n'  |  grep -v '^\[[ =]*\]'"
-
-sudo mkdir "$sdkTargetFolder/cmdline-tools"
-sudo mv "$sdkTargetFolder/tools" "$sdkTargetFolder/cmdline-tools"
-
-echo "Running SDK manager for platforms;$sdkApiLevel, platform-tools and build-tools;$sdkBuildToolsVersion."
-(echo "y"; echo "y") | "$sdkTargetFolder/cmdline-tools/tools/bin/sdkmanager" "--sdk_root=$sdkTargetFolder" \
-    "platforms;$sdkApiLevel" "platform-tools" "build-tools;$sdkBuildToolsVersion"  \
-    | eval $sdkmanager_no_progress_bar_cmd
-
-echo "Checking the contents of Android SDK..."
-ls -l "$sdkTargetFolder"
-
-SetEnvVar "ANDROID_SDK_ROOT" "$sdkTargetFolder"
-SetEnvVar "ANDROID_NDK_ROOT_DEFAULT" "$targetFolder/android-ndk-$ndkVersionDefault"
-SetEnvVar "ANDROID_NDK_ROOT_LATEST" "$targetFolder/android-ndk-$ndkVersionLatest"
-SetEnvVar "ANDROID_NDK_HOST" "darwin-x86_64"
-SetEnvVar "ANDROID_API_VERSION" "$sdkApiLevel"
-
-echo "Android SDK tools = $toolsVersion" >> ~/versions.txt
-echo "Android SDK Build Tools = $sdkBuildToolsVersion" >> ~/versions.txt
-echo "Android SDK API level = $sdkApiLevel" >> ~/versions.txt
-echo "Android NDK = $ndkVersionDefault" >> ~/versions.txt

coin/provisioning/common/macos/cmake.sh

@@ -48,11 +48,11 @@ source "${BASH_SOURCE%/*}/InstallAppFromCompressedFileFromURL.sh"
 # shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
-majorminorversion="3.24.2"
-version="3.24.2"
+majorminorversion="3.21"
+version="3.21.3"
 PrimaryUrl="http://ci-files01-hki.intra.qt.io/input/cmake/cmake-$version-macos-universal.tar.gz"
 AltUrl="https://cmake.org/files/v$majorminorversion/cmake-$version-macos-universal.tar.gz"
-SHA1="19b1473e6ded2d234256b6aac90eb22616c5ab5e"
+SHA1="6775e6eebae22b5ab3010609132c093e65cc4587"
 appPrefix="cmake-$version-macos-universal"
 
 InstallAppFromCompressedFileFromURL "$PrimaryUrl" "$AltUrl" "$SHA1" "$appPrefix"

coin/provisioning/common/macos/disable-app-reopen.sh

@@ -1,49 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2021 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# Prevent applications from re-opening after re-boot.
-# This is needed only with physical mac mini machines used in ci.
-
-
-set -e
-
-sudo chown root ~/Library/Preferences/ByHost/com.apple.loginwindow*
-sudo chmod 000 ~/Library/Preferences/ByHost/com.apple.loginwindow*

coin/provisioning/common/macos/docker.sh

@@ -1,63 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2022 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# shellcheck source=./../unix/DownloadURL.sh
-source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
-
-# This script will install Docker which is needed by RTA
-
-chip=$1
-
-if [[ $chip == "amd64" ]]; then
-    sha="158eae1d2f81cc8a0754d2ea3af8c6e6e555f69b"
-else
-    sha="6adf6cc8558af69296208b045187406a95b020bf"
-fi
-
-echo "Installing Docker for $chip chip"
-urlOccifical="https://desktop.docker.com/mac/main/${chip}/Docker.dmg?utm_source=docker"
-urlCache="http://ci-files01-hki.ci.qt.io/input/mac/Docker_${chip}.dmg"
-
-DownloadURL $urlCache $urlOccifical $sha "/tmp/Docker_${chip}.dmg"
-
-sudo hdiutil attach "/tmp/Docker_${chip}.dmg"
-sudo /Volumes/Docker/Docker.app/Contents/MacOS/install --accept-license --user qt
-sudo hdiutil detach /Volumes/Docker

coin/provisioning/common/macos/install_xcode.sh

@@ -74,7 +74,7 @@ function InstallXCode() {
     echo "Versioning application bundle"
     majorVersion=$(echo $version | cut -d '.' -f 1)
     versionedAppBundle="/Applications/Xcode${majorVersion}.app"
-    sudo mv /Applications/Xcode*.app ${versionedAppBundle}
+    sudo mv /Applications/Xcode.app ${versionedAppBundle}
 
     echo "Selecting Xcode"
     sudo xcode-select --switch ${versionedAppBundle}

coin/provisioning/common/macos/libiodbc.sh

@@ -46,7 +46,7 @@ set -ex
 # shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
-brew install --formula ${BASH_SOURCE%/*}/libiodbc.rb $*
+brew install ${BASH_SOURCE%/*}/libiodbc.rb $*
 
 # CPLUS_INCLUDE_PATH is set so clang and configure can find libiodbc
 

coin/provisioning/common/shared/ffmpeg_config_options.txt

@@ -1 +0,0 @@
---disable-programs --disable-doc --disable-debug --disable-network --disable-lzma --enable-pic

coin/provisioning/common/unix/emsdk.sh

@@ -58,12 +58,9 @@ else
     pathNodeExecutable="node-$versionNode-linux-x64/bin/node"
 fi
 
-emsdkPath="/opt/emsdk/"
-emscriptenPath="${emsdkPath}upstream/emscripten/"
-
-SetEnvVar "PATH" "\"\$PATH:${emscriptenPath}\""
-SetEnvVar "EMSCRIPTEN" "${emscriptenPath}"
-SetEnvVar "EMSDK" "${emsdkPath}"
-SetEnvVar "EMSDK_NODE" "${emsdkPath}${pathNodeExecutable}"
+SetEnvVar "PATH" "\"\$PATH:/opt/emsdk/emscripten-$version/\""
+SetEnvVar "EMSCRIPTEN" "/opt/emsdk/emscripten-$version"
+SetEnvVar "EMSDK" "/opt/emsdk"
+SetEnvVar "EMSDK_NODE" "/opt/emsdk/$pathNodeExecutable"
 
 echo "Emsdk = $version" >> ~/versions.txt

coin/provisioning/common/unix/install-ffmpeg.sh

@@ -1,205 +0,0 @@
-#!/usr/bin/env bash
-
-############################################################################
-##
-## Copyright (C) 2022 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script will build and install FFmpeg static libs
-set -ex
-os="$1"
-
-# shellcheck source=../unix/InstallFromCompressedFileFromURL.sh
-source "${BASH_SOURCE%/*}/../unix/InstallFromCompressedFileFromURL.sh"
-# shellcheck source=../unix/SetEnvVar.sh
-source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
-
-function SourceEnvVar {
-    echo "Source environment variables file"
-    if [ uname -a | grep -q "Ubuntu" ];
-    then
-        if [ lsb_release -a | grep "Ubuntu 22.04" ];
-        then source ~/.bashrc
-        else source ~/.profile
-        fi
-    else
-        source ~/.bashrc
-        source ~/.zshrc
-    fi
-}
-
-if [ "$os" == "android" ];
-then
-version="f0d2ed135c3602670b56a95e0346487730317407"
-url_public="https://github.com/FFmpeg/FFmpeg/archive/$version.tar.gz"
-sha1="a429060d07b6d84c849a68741f816a7e91447d12"
-else
-version="n5.1"
-url_public="https://github.com/FFmpeg/FFmpeg/archive/refs/tags/$version.tar.gz"
-sha1="1d4283c5ff9e02378893168f55b8672bb30b9176"
-fi
-
-url_cached="http://ci-files01-hki.intra.qt.io/input/ffmpeg/$version.tar.gz"
-ffmpeg_name="FFmpeg-$version"
-
-target_dir="$HOME"
-app_prefix=""
-ffmpeg_source_dir="$target_dir/$ffmpeg_name"
-
-if [ ! -d "$ffmpeg_source_dir" ];
-then
-   InstallFromCompressedFileFromURL "$url_cached" "$url_public" "$sha1" "$target_dir" "$app_prefix"
-fi
-
-ffmpeg_config_options=$(cat "${BASH_SOURCE%/*}/../shared/ffmpeg_config_options.txt")
-
-
-build_ffmpeg() {
-  local arch="$1"
-  local prefix="$2"
-  local build_dir="$ffmpeg_source_dir/build/$arch"
-  mkdir -p "$build_dir"
-  pushd "$build_dir"
-
-  if [ -z  "$prefix" ]
-  then prefix="/usr/local/$ffmpeg_name"
-  fi
-
-  # android configures its own toolchain, it does not use the system clang
-  if [ -n "$arch" ] && [ "$os" != "android" ]
-  then cc="clang -arch $arch"
-  fi
-
-  if [ -n "$arch" ]
-  then $ffmpeg_source_dir/configure $ffmpeg_config_options --prefix="$prefix" --enable-cross-compile --arch=$arch --cc="$cc"
-  else $ffmpeg_source_dir/configure $ffmpeg_config_options --prefix="$prefix"
-  fi
-  make install DESTDIR=$build_dir/installed -j4
-  popd
-}
-
-build_ffmpeg_android() {
-  SourceEnvVar
-  target_arch=$1
-  target_dir=$2
-
-  if [ "$target_arch" == "x86_64" ];
-  then
-    #emulador on CI is x86_64
-    target_toolchain_arch="x86_64-linux-android"
-    target_arch=x86_64
-    target_cpu=x86_64
-  else
-    #emulador on CI is x86
-    target_toolchain_arch="i686-linux-android"
-    target_arch=x86
-    target_cpu=i686
-  fi
-
-  api_version=24
-
-  toolchain=${ANDROID_NDK_ROOT_DEFAULT}/toolchains/llvm/prebuilt/${ANDROID_NDK_HOST}
-  toolchain_bin=${toolchain}/bin
-  sysroot=${toolchain}/sysroot
-  cxx=${toolchain_bin}/${target_toolchain_arch}${api_version}-clang++
-  cc=${toolchain_bin}/${target_toolchain_arch}${api_version}-clang
-
-  ffmpeg_config_options+=" --disable-vulkan --target-os=android --enable-jni --enable-mediacodec --enable-pthreads --enable-neon --disable-asm --cpu=${target_cpu} --disable-indev=android_camera --sysroot=${sysroot} --sysinclude=${sysroot}/usr/include/ --cc=${cc} --cxx=${cxx}"
-  build_ffmpeg ${target_arch} ${target_dir}
-}
-
-if [ "$os" == "linux" ]; then
-  if [ -f /etc/redhat-release ]
-  then sudo yum -y install yasm
-  else sudo apt install yasm
-  fi
-  build_ffmpeg
-  sudo mv "$ffmpeg_source_dir/build/installed/usr/local/$ffmpeg_name" "/usr/local"
-  SetEnvVar "FFMPEG_DIR" "/usr/local/$ffmpeg_name"
-
-elif [ "$os" == "macos" ]; then
-  brew install yasm
-  export MACOSX_DEPLOYMENT_TARGET=10.14
-  build_ffmpeg
-  sudo mv "$ffmpeg_source_dir/build/installed/usr/local/$ffmpeg_name" "/usr/local"
-  SetEnvVar "FFMPEG_DIR" "/usr/local/$ffmpeg_name"
-
-elif [ "$os" == "macos-universal" ]; then
-  brew install yasm
-  export MACOSX_DEPLOYMENT_TARGET=10.14
-  build_ffmpeg "arm64"
-  build_ffmpeg "x86_64"
-
-  sudo "${BASH_SOURCE%/*}/../macos/makeuniversal.sh" "$ffmpeg_source_dir/build/arm64/installed" "$ffmpeg_source_dir/build/x86_64/installed"
-  SetEnvVar "FFMPEG_DIR" "/usr/local/$ffmpeg_name"
-
-elif  [ "$os" == "android" ]; then
-
-  SourceEnvVar
-
-  url_cached=""
-  url_public=""
-  sha1=""
-
-  #get emulator target arch
-  if [ "$ANDROID_EMULATOR" == *"x86_64"* ];
-  then
-    target_arch=x86_64
-    sha1="0241fd483c16f4ce53206b911214b06854cdef9d"
-    url_cached="http://ci-files01-hki.intra.qt.io/input/ffmpeg/android-ffmpeg-x86_64.zip"
-    target_dir="/opt/android/$ffmpeg_name/ffmpeg-x86_64"
-  else
-    target_arch=x86
-    url_cached="http://ci-files01-hki.intra.qt.io/input/ffmpeg/android-ffmpeg-x86.zip"
-    sha1="8b254e31411a350edb581bb30e31401866abbe7d"
-    target_dir="/opt/android/$ffmpeg_name/ffmpeg-x86"
-  fi
-
-  app_prefix=""
-
-  #try install a pre-build
-  InstallFromCompressedFileFromURL "$url_cached" "$url_public" "$sha1" "$target_dir" "$app_prefix"
-
-  #if could not install pre-build, build it
-  if [ ! -d "$target_dir" ];
-  then build_ffmpeg_android "$target_arch" "$target_dir"
-  fi
-
-  #set the var to use in yaml
-  SetEnvVar "FFMPEG_DIR_ANDROID" "$target_dir"
-fi
-

coin/provisioning/common/unix/install-openssl.sh

@@ -65,7 +65,6 @@ if [[ "$os" == "linux" ]]; then
     ./Configure --prefix="$opensslHome" shared no-ssl3-method enable-ec_nistp_64_gcc_128 linux-x86_64 "-Wa,--noexecstack"
     make && make install_sw install_ssldirs
     SetEnvVar "OPENSSL_HOME" "$opensslHome"
-    SetEnvVar "PATH" "\"$opensslHome/bin:\$PATH\""
     if uname -a |grep -q "Ubuntu"; then
         echo "export LD_LIBRARY_PATH=$opensslHome/lib:$LD_LIBRARY_PATH" >> ~/.bash_profile
     else

coin/provisioning/common/unix/libclang.sh

@@ -53,13 +53,13 @@ source "${BASH_SOURCE%/*}/SetEnvVar.sh"
 # shellcheck source=./DownloadURL.sh
 source "${BASH_SOURCE%/*}/DownloadURL.sh"
 
-libclang_version="15.0.0"
+libclang_version=12.0
 
 if uname -a |grep -q Darwin; then
     version=$libclang_version
-    url="https://download.qt.io/development_releases/prebuilt/libclang/qt/libclang-release_${version}-based-mac.7z"
-    url_cached="http://ci-files01-hki.intra.qt.io/input/libclang/qt/libclang-release_${version}-based-mac.7z"
-    sha1="6d916a17459c81551dde47580ae3f071e93338a5"
+    url="https://download.qt.io/development_releases/prebuilt/libclang/qt/libclang-release_${version//\./}-based-mac.7z"
+    url_cached="http://ci-files01-hki.intra.qt.io/input/libclang/qt/libclang-release_${version//\./}-based-mac.7z"
+    sha1="bb9223450c1c36ee37d8c91e876dba82db117a7a"
 elif test -f /etc/redhat-release && cat /etc/redhat-release | grep "Red Hat" | grep -v "8" ; then
     version=$libclang_version
     url="https://download.qt.io/development_releases/prebuilt/libclang/qt/libclang-release_${version//\./}-based-linux-CentOS8.3-gcc9.2-x86_64.7z"
@@ -67,9 +67,9 @@ elif test -f /etc/redhat-release && cat /etc/redhat-release | grep "Red Hat" | g
     sha1="d02e4dd30fe3f810c3a0cdcbed5870dec56ed91b"
 else
     version=$libclang_version
-    url="https://download.qt.io/development_releases/prebuilt/libclang/qt/libclang-release_${version}-based-linux-Ubuntu20.04-gcc9.3-x86_64.7z"
-    url_cached="http://ci-files01-hki.intra.qt.io/input/libclang/qt/libclang-release_${version}-based-linux-Ubuntu20.04-gcc9.3-x86_64.7z"
-    sha1="bd6615012b8bdb2720a45ede56e05f6db7191843"
+    url="https://download.qt.io/development_releases/prebuilt/libclang/qt/libclang-release_${version//\./}-based-linux-Ubuntu20.04-gcc9.3-x86_64.7z"
+    url_cached="http://ci-files01-hki.intra.qt.io/input/libclang/qt/libclang-release_${version//\./}-based-linux-Ubuntu20.04-gcc9.3-x86_64.7z"
+    sha1="81b3e640befa23b5cdebd59e206dc79e4de20ba3"
 fi
 
 zip="/tmp/libclang.7z"

coin/provisioning/common/unix/openssl_for_android.sh

@@ -49,14 +49,7 @@ source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
 version="1.1.1m"
-ndkVersionLatest="r25b"
-ndkVersionDefault="r23b"
-prebuiltOpensslNdkShaDarwinLatest="1f4f994255c39839c8857d2ed1ff58a2101de714"
-prebuiltOpensslNdkShaLinuxLatest="15f7014781186a23f4973a719b55b766b1e69116"
-prebuiltOpensslNdkShaDarwinDefault="2624b0c2772e360bbbae7a7f2dc342e4b97f1a2e"
-prebuiltOpensslNdkShaLinuxDefault="f58dcb32b2d3e5edc7e5141ae139a50547805f60"
-
-: ' SOURCE BUILD INSTRUCTIONS - Openssl prebuilt was made using Android NDK 25
+: ' SOURCE BUILD INSTRUCTIONS - Openssl prebuilt was made using Android NDK 21
 # Source built requires GCC and Perl to be in PATH.
 exports_file="/tmp/export.sh"
 # source previously made environmental variables.
@@ -88,34 +81,18 @@ PATH=$TOOLCHAIN:$PATH CC=clang ./Configure android-arm
 PATH=$TOOLCHAIN:$PATH CC=clang make build_generated
 '
 
-function InstallPrebuiltOpenssl() {
-
-    ndkVersion=$1
-    nkdSha=$2
-    os=$3
-
-    if [[ ! -d ${HOME}/openssl_android_ndk_${ndkVersion}/android/openssl-${version} ]]; then
-        prebuiltUrl="http://ci-files01-hki.intra.qt.io/input/openssl/prebuilt-openssl-${version}-for-android-ndk-${ndkVersion}-${os}.tar.gz"
-        targetFile="/tmp/prebuilt-openssl-${version}-for-android-ndk-${ndkVersion}-${os}.tar.gz"
-
-        DownloadURL "$prebuiltUrl" "$prebuiltUrl" "$nkdSha" "$targetFile"
-        tar -xzf "$targetFile" -C "${HOME}"
-        mv "${HOME}/openssl" "${HOME}/openssl_android_ndk_${ndkVersion}"
-        opensslHome="${HOME}/openssl_android_ndk_${ndkVersion}/android/openssl-${version}"
-        sudo rm -f $targetFile
-    fi
-}
-
 if uname -a |grep -q "Darwin"; then
-    InstallPrebuiltOpenssl $ndkVersionDefault $prebuiltOpensslNdkShaDarwinDefault "darwin"
-    SetEnvVar "OPENSSL_ANDROID_HOME_DEFAULT" "$opensslHome"
-    InstallPrebuiltOpenssl $ndkVersionLatest $prebuiltOpensslNdkShaDarwinLatest "darwin"
-    SetEnvVar "OPENSSL_ANDROID_HOME_LATEST" "$opensslHome"
+    prebuiltUrl="http://ci-files01-hki.intra.qt.io/input/openssl/prebuilt-openssl-1.1.1m-for-android-ndk-r23b-darwin.tar.gz"
+    sha="2624b0c2772e360bbbae7a7f2dc342e4b97f1a2e"
 else
-    InstallPrebuiltOpenssl $ndkVersionDefault $prebuiltOpensslNdkShaLinuxDefault "linux"
-    SetEnvVar "OPENSSL_ANDROID_HOME_DEFAULT" "$opensslHome"
-    InstallPrebuiltOpenssl $ndkVersionLatest $prebuiltOpensslNdkShaLinuxLatest "linux"
-    SetEnvVar "OPENSSL_ANDROID_HOME_LATEST" "$opensslHome"
+    prebuiltUrl="http://ci-files01-hki.intra.qt.io/input/openssl/prebuilt-openssl-1.1.1m-for-android-ndk-r23b-linux.tar.gz"
+    sha="f58dcb32b2d3e5edc7e5141ae139a50547805f60"
 fi
+targetFile="/tmp/prebuilt-openssl-$version.tar.gz"
+DownloadURL "$prebuiltUrl" "$prebuiltUrl" "$sha" "$targetFile"
+tar -xzf "$targetFile" -C "${HOME}"
+
+opensslHome="${HOME}/openssl/android/openssl-${version}"
+SetEnvVar "OPENSSL_ANDROID_HOME" "$opensslHome"
 
 echo "OpenSSL for Android = $version" >> ~/versions.txt

coin/provisioning/common/unix/squishInstall.sh

@@ -47,20 +47,20 @@ set -ex
 # This script will fetch and extract pre-buildt squish package for Linux and Mac.
 # Squish is need by Release Test Automation (RTA)
 
-version="7.0.1"
-qtBranch="63x"
+version="6.7.2"
+qtBranch="62x"
 installFolder="/opt"
 squishFolder="$installFolder/squish"
 preBuildCacheUrl="ci-files01-hki.intra.qt.io:/hdd/www/input/squish/jenkins_build/stable"
 licenseFile=".squish-license"
-licenseUrl="http://ci-files01-hki.intra.qt.io/input/squish/coin/$qtBranch/$licenseFile"
-licenseSHA="e84b499a2011f9bb1a6eefc7b2338d7ae770927a"
+licenseUrl="http://ci-files01-hki.intra.qt.io/input/squish/coin/$licenseFile"
+licenseSHA="bda9c3bce2b9a74cb10ead9e87a4ebacd9eef4c2"
 if uname -a |grep -q Darwin; then
     compressedFolder="prebuild-squish-$version-$qtBranch-mac.tar.gz"
-    sha1="ed8aa2e902808741fb9496a0d339d4c145530eef"
+    sha1="6b7d80be4d107ba53ac9218fe5ca79f72c6e1e2d"
 else
      compressedFolder="prebuild-squish-$version-$qtBranch-linux64.tar.gz"
-     sha1="a9de35bba9b4dd9afabdde4df14564428745a979"
+     sha1="1f57efd6f21a994b07f28b0b44ff7972bbf51733"
 fi
 
 mountFolder="/tmp/squish"
@@ -110,8 +110,8 @@ fi
 if uname -a |grep -q "Ubuntu"; then
     if [ ! -e "/usr/lib/tcl8.6" ]; then
         sudo mkdir /usr/lib/tcl8.6
-        #this needs to be copied only to squish_for_qt62
-        sudo cp "$squishFolder/squish_for_qt62/tcl/lib/tcl8.6/init.tcl" /usr/lib/tcl8.6/
+        #this needs to be copied only to squish_for_qt6
+        sudo cp "$squishFolder/squish_for_qt6/tcl/lib/tcl8.6/init.tcl" /usr/lib/tcl8.6/
     fi
 fi
 
@@ -124,26 +124,26 @@ sudo chown qt:$usersGroup "$HOME/$licenseFile"
 
 echo "Set commands for environment variables in .bashrc"
 if uname -a |grep -q "Ubuntu"; then
-    echo "export SQUISH_PATH=$squishFolder/squish_for_qt62" >> ~/.profile
-    echo "export PATH=\$PATH:$squishFolder/squish_for_qt62/bin" >> ~/.profile
+    echo "export SQUISH_PATH=$squishFolder/squish_for_qt6" >> ~/.profile
+    echo "export PATH=\$PATH:$squishFolder/squish_for_qt6/bin" >> ~/.profile
 else
-    echo "export SQUISH_PATH=$squishFolder/squish_for_qt63" >> ~/.bashrc
-    echo "export PATH=\$PATH:$squishFolder/squish_for_qt63/bin" >> ~/.bashrc
+    echo "export SQUISH_PATH=$squishFolder/squish_for_qt6" >> ~/.bashrc
+    echo "export PATH=\$PATH:$squishFolder/squish_for_qt6/bin" >> ~/.bashrc
 fi
 
 echo "Verifying Squish, available installations:"
 ls -la $squishFolder
 
-if "$squishFolder/squish_for_qt62/bin/squishrunner" --testsuite "$squishFolder/suite_test_squish" | grep "Squish test run successfully" ; then
-  echo "Squish for Qt6.3 installation tested successfully"
+if "$squishFolder/squish_for_qt5/bin/squishrunner" --testsuite "$squishFolder/suite_test_squish" | grep "Squish test run successfully" ; then
+  echo "Squish for Qt5 installation tested successfully"
 else
-  echo "Squish for Qt6.3 test failed! Package wasn't installed correctly."
+  echo "Squish for Qt5 test failed! Package wasn't installed correctly."
   exit 1
 fi
-if "$squishFolder/squish_for_qt63/bin/squishrunner" --testsuite "$squishFolder/suite_test_squish" | grep "Squish test run successfully" ; then
-  echo "Squish for Qt6.2 installation tested successfully"
+if "$squishFolder/squish_for_qt6/bin/squishrunner" --testsuite "$squishFolder/suite_test_squish" | grep "Squish test run successfully" ; then
+  echo "Squish for Qt6 installation tested successfully"
 else
-  echo "Squish for Qt6.2 test failed! Package wasn't installed correctly."
+  echo "Squish for Qt6 test failed! Package wasn't installed correctly."
   exit 1
 fi
 

coin/provisioning/common/windows/android-openssl.ps1

@@ -51,83 +51,59 @@ if (Is64BitWinHost) {
 # Msys need to be installed to target machine
 # More info and building instructions can be found from http://doc.qt.io/qt-5/opensslsupport.html
 
-$openssl_version = "1.1.1m"
-$ndk_version_latest = "r25b"
-$ndk_version_default = "r23b"
-$openssl_compressed = Get-DownloadLocation ("openssl-${openssl_version}_fixes-ndk_root.tar.gz")
-$openssl_sha1 = "c9638d25b9709eda1ac52591c0993af52d6d1206"
-$prebuilt_sha1_ndk_latest = "2897c84dccdb26e15b467e4a63de025fe7038899"
-$prebuilt_sha1_ndk_default = "0aebe55d2436f235e1a24ae9d1030cb6ce8f31da"
+$version = "1.1.1m"
+$ndk_version = "r23b"
+$zip = Get-DownloadLocation ("openssl-${version}_fixes-ndk_root.tar.gz")
+$prebuilt_zip = Get-DownloadLocation ("prebuilt-openssl-${version}-for-android-used-ndk-${ndk_version}-windows.zip")
+$sha1 = "c9638d25b9709eda1ac52591c0993af52d6d1206"
+$prebuilt_sha1 = "0aebe55d2436f235e1a24ae9d1030cb6ce8f31da"
 $destination = "C:\Utils\openssl-android-master"
+$prebuilt_url = "\\ci-files01-hki.intra.qt.io\provisioning\openssl\prebuilt-openssl-${version}-for-android-used-ndk-${ndk_version}-windows.zip"
 
-function Install($1, $2) {
-        $ndk_version = $1
-        $prebuilt_sha1 = $2
+# msys unix style paths
+$ndkPath = "/c/Utils/Android/android-ndk-${ndk_version}"
+$openssl_path = "/c/Utils/openssl-android-master"
+$cc_path = "$ndkPath/toolchains/llvm/prebuilt/windows-x86_64/bin"
+if ((Test-Path $prebuilt_url)) {
+    Download $prebuilt_url $prebuilt_url $prebuilt_zip
+    Verify-Checksum $prebuilt_zip $prebuilt_sha1
+    Extract-7Zip $prebuilt_zip C:\Utils
+    Remove $prebuilt_zip
+} else {
+    # openssl-${version}_fixes-ndk_root.tar.gz package includes fixes from https://github.com/openssl/openssl/pull/17322 and string ANDROID_NDK_HOME is replaced with ANDROID_NDK_ROOT in Configurations/15-android.conf
+    Download \\ci-files01-hki.intra.qt.io\provisioning\openssl\openssl-${version}_fixes-ndk_root.tar.gz \\ci-files01-hki.intra.qt.io\provisioning\openssl\openssl-${version}_fixes-ndk_root.tar.gz $zip
+    Verify-Checksum $zip $sha1
 
-        # msys unix style paths
-        $openssl_path = "/c/Utils/openssl-android-master"
-        $ndk_path = "/c/Utils/Android/android-ndk-${ndk_version}"
-        $cc_path = "$ndk_path/toolchains/llvm/prebuilt/windows-x86_64/bin"
+    Extract-7Zip $zip C:\Utils\tmp
+    Extract-7Zip C:\Utils\tmp\openssl-$version.tar C:\Utils\tmp
+    Move-Item C:\Utils\tmp\openssl-${version} $destination
+    Remove "$zip"
 
-        $prebuilt_url_ndk = "\\ci-files01-hki.intra.qt.io\provisioning\openssl\prebuilt-openssl-${openssl_version}-for-android-used-ndk-${ndk_version}-windows.zip"
-        $prebuilt_zip_ndk = Get-DownloadLocation ("prebuilt-openssl-${openssl_version}-for-android-used-ndk-${ndk_version}-windows.zip")
+    Write-Host "Configuring OpenSSL $version for Android..."
+    Push-Location $destination
+    # $ must be escaped in powershell...
 
-    if ((Test-Path $prebuilt_url_ndk)) {
-        Write-Host "Install prebuilt OpenSSL for Android"
-        Download $prebuilt_url_ndk $prebuilt_url_ndk $prebuilt_zip_ndk
-        Verify-Checksum $prebuilt_zip_ndk $prebuilt_sha1
-        Extract-7Zip $prebuilt_zip_ndk C:\Utils
-        Remove $prebuilt_zip_ndk
-    } else {
-        Write-Host "Build OpenSSL for Android from sources"
-        # openssl-${openssl_version}_fixes-ndk_root.tar.gz package includes fixes from https://github.com/openssl/openssl/pull/17322 and string ANDROID_NDK_HOME is replaced with ANDROID_NDK_ROOT in Configurations/15-android.conf
-        Download \\ci-files01-hki.intra.qt.io\provisioning\openssl\openssl-${openssl_version}_fixes-ndk_root.tar.gz \\ci-files01-hki.intra.qt.io\provisioning\openssl\openssl-${openssl_version}_fixes-ndk_root.tar.gz $openssl_compressed
-        Verify-Checksum $openssl_compressed $openssl_sha1
+    function CheckExitCode {
 
-        Extract-7Zip $openssl_compressed C:\Utils\tmp
-        Extract-7Zip C:\Utils\tmp\openssl-${openssl_version}_fixes-ndk_root.tar C:\Utils\tmp
-        Move-Item C:\Utils\tmp\openssl-${openssl_version} $destination
-        Remove "$openssl_compressed"
+        param (
+            $p
+        )
 
-        Write-Host "Configuring OpenSSL $openssl_version for Android..."
-        Push-Location $destination
-        # $ must be escaped in powershell...
-
-        function CheckExitCode {
-
-            param (
-                $p
-            )
-
-            if ($p.ExitCode) {
-                Write-host "Process failed with exit code: $($p.ExitCode)"
-                exit 1
-            }
+        if ($p.ExitCode) {
+            Write-host "Process failed with exit code: $($p.ExitCode)"
+            exit 1
         }
-
-        $configure = Start-Process -NoNewWindow -Wait -PassThru -ErrorAction Stop -FilePath "$msys_bash" -ArgumentList ("-lc", "`"pushd $openssl_path; ANDROID_NDK_ROOT=$ndk_path PATH=${cc_path}:`$PATH CC=clang $openssl_path/Configure shared android-arm`"")
-        CheckExitCode $configure
-
-        $make = Start-Process -NoNewWindow -Wait -PassThru -ErrorAction Stop -FilePath "$msys_bash" -ArgumentList ("-lc", "`"pushd $openssl_path; ANDROID_NDK_ROOT=$ndk_path PATH=${cc_path}:`$PATH CC=clang make -f $openssl_path/Makefile build_generated`"")
-        CheckExitCode $make
-
-        Pop-Location
-        Remove-item C:\Utils\tmp -Recurse -Confirm:$false
     }
 
-    Move-Item $destination "${destination}-${ndk_version}"
+    $configure = Start-Process -NoNewWindow -Wait -PassThru -ErrorAction Stop -FilePath "$msys_bash" -ArgumentList ("-lc", "`"pushd $openssl_path; ANDROID_NDK_ROOT=$ndkPath PATH=${cc_path}:`$PATH CC=clang $openssl_path/Configure shared android-arm`"")
+    CheckExitCode $configure
+
+    $make = Start-Process -NoNewWindow -Wait -PassThru -ErrorAction Stop -FilePath "$msys_bash" -ArgumentList ("-lc", "`"pushd $openssl_path; ANDROID_NDK_ROOT=$ndkPath PATH=${cc_path}:`$PATH CC=clang make -f $openssl_path/Makefile build_generated`"")
+    CheckExitCode $make
+
+    Pop-Location
+    Remove-item C:\Utils\tmp -Recurse -Confirm:$false
 }
 
-# Install NDK Default version
-Install $ndk_version_default $prebuilt_sha1_ndk_default
-
-if (Test-Path -Path ${destination}-${ndk_version_latest}) {
-    Write-Host "OpenSSL for Android Latest version is the same than Default. Installation done."
-} else {
-    # Install NDK Latest version
-    Install $ndk_version_latest $prebuilt_sha1_ndk_latest
-}
-
-Set-EnvironmentVariable "OPENSSL_ANDROID_HOME_DEFAULT" "${destination}-${ndk_version_default}"
-Set-EnvironmentVariable "OPENSSL_ANDROID_HOME_LATEST" "${destination}-${ndk_version_latest}"
-Write-Output "Android OpenSSL = $openssl_version" >> ~/versions.txt
+Set-EnvironmentVariable "OPENSSL_ANDROID_HOME" "$destination"
+Write-Output "Android OpenSSL = $version" >> ~/versions.txt

coin/provisioning/common/windows/android.ps1

@@ -46,17 +46,12 @@
 # That's why we need to use Andoid-21 API version in Qt 5.9.
 
 # NDK
-$ndkVersionLatest = "r25b"
-$ndkVersionDefault = "r23b"
-$ndkChecksumLatest = "b2e9b5ab2e1434a65ffd85780891878cf5c6fd92"
-$ndkChecksumDefault = "6e3fb50022c611a2b13d02f5de5c21cc7206a298"
-$ndkCachedUrlLatest = "\\ci-files01-hki.intra.qt.io\provisioning\android\android-ndk-$ndkVersionLatest-windows.zip"
-$ndkOfficialUrlLatest = "https://dl.google.com/android/repository/android-ndk-$ndkVersionLatest-windows.zip"
-$ndkCachedUrlDefault = "\\ci-files01-hki.intra.qt.io\provisioning\android\android-ndk-$ndkVersionDefault-windows.zip"
-$ndkOfficialUrlDefault = "https://dl.google.com/android/repository/android-ndk-$ndkVersionDefault-windows.zip"
-$ndkFolderLatest = "c:\Utils\Android\android-ndk-$ndkVersionLatest"
-$ndkFolderDefault = "c:\Utils\Android\android-ndk-$ndkVersionDefault"
-$ndkZip = "c:\Windows\Temp\android_ndk.zip"
+$ndkVersion = "r23b"
+$ndkCachedUrl = "\\ci-files01-hki.intra.qt.io\provisioning\android\android-ndk-$ndkVersion-windows.zip"
+$ndkOfficialUrl = "https://dl.google.com/android/repository/android-ndk-$ndkVersion-windows.zip"
+$ndkChecksum = "6e3fb50022c611a2b13d02f5de5c21cc7206a298"
+$ndkFolder = "c:\Utils\Android\android-ndk-$ndkVersion"
+$ndkZip = "c:\Windows\Temp\android_ndk_$ndkVersion.zip"
 
 # SDK
 $toolsVersion = "2.1"
@@ -80,20 +75,11 @@ function Install($1, $2, $3, $4) {
     Download $offcialUrl $cacheUrl $zip
     Verify-Checksum $zip "$checksum"
     Extract-7Zip $zip C:\Utils\Android
-    Remove $zip
 }
 
-Write-Host "Installing Android NDK $ndkVersionDefault"
-Install $ndkCachedUrlDefault $ndkZip $ndkChecksumDefault $ndkOfficialUrlDefault
-Set-EnvironmentVariable "ANDROID_NDK_ROOT_DEFAULT" $ndkFolderDefault
-
-if (Test-Path -Path $ndkFolderLatest) {
-    Write-Host "Android Latest version is the same than Default. NDK installation done."
-} else {
-    Write-Host "Installing Android NDK $nkdVersionLatest"
-    Install $ndkCachedUrlLatest $ndkZip $ndkChecksumLatest $ndkOfficialUrlLatest
-    Set-EnvironmentVariable "ANDROID_NDK_ROOT_LATEST" $ndkFolderLatest
-}
+Write-Host "Installing Android NDK $nkdVersion"
+Install $ndkCachedUrl $ndkZip $ndkChecksum $ndkOfficialUrl
+Set-EnvironmentVariable "ANDROID_NDK_ROOT" $ndkFolder
 
 Install $toolsCachedUrl $sdkZip $toolsChecksum $sdkOfficialUrl
 New-Item -ItemType directory -Path $toolsFolder
@@ -131,4 +117,4 @@ cmd /c "dir C:\Utils\android"
 Write-Output "Android SDK tools= $toolsVersion" >> ~/versions.txt
 Write-Output "Android SDK Build Tools = $sdkBuildToolsVersion" >> ~/versions.txt
 Write-Output "Android SDK Api Level = $sdkApiLevel" >> ~/versions.txt
-Write-Output "Android NDK = $ndkVersionDefault" >> ~/versions.txt
+Write-Output "Android NDK = $ndkVersion" >> ~/versions.txt

coin/provisioning/common/windows/cmake.ps1

@@ -39,8 +39,8 @@
 
 . "$PSScriptRoot\helpers.ps1"
 
-$majorminorversion = "3.24"
-$version = "3.24.2"
+$majorminorversion = "3.21"
+$version = "3.21.3"
 
 $zip = Get-DownloadLocation ("cmake-" + $version + "-windows-i386.zip")
 $officialurl = "https://cmake.org/files/v" + $majorminorversion + "/cmake-" + $version + "-windows-i386.zip"
@@ -50,7 +50,7 @@ Write-Host "Removing old cmake"
 Remove "C:\CMake"
 
 Download $officialurl $cachedurl $zip
-Verify-Checksum $zip "97e6cdedded7a7522f4f4a64d7545d0454b4fad5"
+Verify-Checksum $zip "f853ad791629141ce4121b175a2afdb4e46e7a54"
 
 Extract-7Zip $zip C:
 $defaultinstallfolder = "C:\cmake-" + $version + "-windows-i386"

coin/provisioning/common/windows/conan.ps1

@@ -39,7 +39,7 @@
 
 . "$PSScriptRoot\helpers.ps1"
 
-$scriptsPath = [System.Environment]::GetEnvironmentVariable('PIP3_PATH', [System.EnvironmentVariableTarget]::Machine)
+$scriptsPath = "C:\Python36\Scripts"
 $version = "1.39.0"
 Run-Executable "$scriptsPath\pip3.exe" "install conan==$version"
 Write-Output "Conan = $version" >> ~\versions.txt

coin/provisioning/common/windows/install-ffmpeg.ps1

@@ -1,153 +0,0 @@
-############################################################################
-##
-## Copyright (C) 2022 The Qt Company Ltd.
-## Contact: https://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see https://www.qt.io/terms-conditions. For further
-## information use the contact form at https://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 3 as published by the Free Software
-## Foundation and appearing in the file LICENSE.LGPL3 included in the
-## packaging of this file. Please review the following information to
-## ensure the GNU Lesser General Public License version 3 requirements
-## will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
-##
-## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU
-## General Public License version 2.0 or (at your option) the GNU General
-## Public license version 3 or any later version approved by the KDE Free
-## Qt Foundation. The licenses are as published by the Free Software
-## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
-## included in the packaging of this file. Please review the following
-## information to ensure the GNU General Public License requirements will
-## be met: https://www.gnu.org/licenses/gpl-2.0.html and
-## https://www.gnu.org/licenses/gpl-3.0.html.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-. "$PSScriptRoot\helpers.ps1"
-
-# This script will install FFmpeg
-$msys = "C:\Utils\msys64\usr\bin\bash"
-
-$version = "n5.1"
-$ffmpeg_name = "ffmpeg-" + $version;
-$sha1 = "9D5AD63032B03922D38F99159728F24C305FC345"
-
-$url_cached = "http://ci-files01-hki.intra.qt.io/input/ffmpeg/" + $version + ".zip"
-$url_public = "https://github.com/FFmpeg/FFmpeg/archive/refs/tags/" +$version + ".zip"
-$download_location = "C:\Windows\Temp\" + $ffmpeg_name + ".zip"
-$unzip_location = "C:\"
-
-Write-Host "Fetching FFmpeg $version..."
-
-Download $url_public $url_cached $download_location
-Verify-Checksum $download_location $sha1
-Extract-7Zip $download_location $unzip_location
-Remove $download_location
-
-$config = Get-Content "$PSScriptRoot\..\shared\ffmpeg_config_options.txt"
-Write-Host "FFmpeg configuration $config"
-
-
-function InstallFfmpeg {
-    Param (
-        [string]$buildSystem,
-        [string]$msystem,
-        [string]$additionalPath,
-        [string]$ffmpegDirEnvVar,
-        [string]$toolchain
-    )
-
-    Write-Host "Configure and compile ffmpeg for $buildSystem"
-
-    $oldPath = $env:PATH
-
-    if ($additionalPath) { $env:PATH = "$additionalPath;$env:PATH" }
-    $env:MSYS2_PATH_TYPE = "inherit"
-    $env:MSYSTEM = $msystem
-
-    $cmd = "cd /c/$ffmpeg_name"
-    $cmd += " && mkdir -p build/$buildSystem && cd build/$buildSystem"
-    $cmd += " && ../../configure --prefix=installed $config"
-    if ($toolchain) { $cmd += " --toolchain=$toolchain" }
-    $cmd += " && make install -j"
-
-    Write-Host "MSYS cmd:"
-    Write-Host $cmd
-    $buildResult = Start-Process -NoNewWindow -Wait -PassThru -ErrorAction Stop -FilePath "$msys" -ArgumentList ("-lc", "`"$cmd`"")
-
-    $env:PATH = $oldPath
-
-    if ($buildResult.ExitCode) {
-        Write-Host "Failed to build ffmpeg for $buildSystem"
-        return $false
-    }
-
-    Set-EnvironmentVariable $ffmpegDirEnvVar "C:\$ffmpeg_name\build\$buildSystem\installed"
-    return $true
-}
-
-function InstallMingwFfmpeg {
-    $mingwPath = [System.Environment]::GetEnvironmentVariable("MINGW1120", [System.EnvironmentVariableTarget]::Machine)
-    return InstallFfmpeg -buildSystem "mingw" -msystem "MINGW" -additionalPath "$mingwPath\bin" -ffmpegDirEnvVar "FFMPEG_DIR_MINGW"
-}
-
-
-function InstallMsvcFfmpeg {
-    $vsPath = "C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional"
-    #$vsPath = "C:\Program Files\Microsoft Visual Studio\2022\Professional"
-
-    Write-Host "Enter VisualStudio developer shell"
-    try {
-        Import-Module "$vsPath\Common7\Tools\Microsoft.VisualStudio.DevShell.dll"
-        Enter-VsDevShell -VsInstallPath $vsPath -DevCmdArguments "-arch=x64 -no_logo"
-    } catch {
-        Write-Host "Failed to enter VisualStudio DevShell"
-        return $false
-    }
-
-    $result = InstallFfmpeg -buildSystem "msvc" -msystem "MSYS" -toolchain "msvc" -ffmpegDirEnvVar "FFMPEG_DIR_MSVC"
-
-    if ($result) {
-        # As ffmpeg build system creates lib*.a file we have to rename them to *.lib files to be recognized by WIN32
-        Write-Host "Rename libraries lib*.a -> *.lib"
-        try {
-            $msvcDir = [System.Environment]::GetEnvironmentVariable("FFMPEG_DIR_MSVC", [System.EnvironmentVariableTarget]::Machine)
-            Get-ChildItem "$msvcDir\lib\lib*.a" | Rename-Item -NewName { $_.Name -replace 'lib(\w+).a$', '$1.lib' }
-        } catch {
-            Write-Host "Failed to rename libraries lib*.a -> *.lib"
-            return $false
-        }
-    }
-
-    return $result
-}
-
-
-function InstallLlvmMingwFfmpeg {
-    return InstallFfmpeg -buildSystem "llvm-mingw" -msystem "CLANG64" -ffmpegDirEnvVar "FFMPEG_DIR_LLVM_MINGW" -additionalPath "C:\llvm-mingw\bin"
-}
-
-$mingwRes = InstallMingwFfmpeg
-$msvcRes = InstallMsvcFfmpeg
-$llvmMingwRes = InstallLlvmMingwFfmpeg
-
-Write-Host "Ffmpeg installation results:"
-Write-Host "  mingw:" $(if ($mingwRes) { "OK" } else { "FAIL" })
-Write-Host "  msvc:" $(if ($msvcRes) { "OK" } else { "FAIL" })
-Write-Host "  llvm-mingw:" $(if ($llvmMingwRes) { "OK" } else { "FAIL" })
-
-exit $(if ($mingwRes -and $msvcRes -and $llvmMingwRes) { 0 } else { 1 })

coin/provisioning/common/windows/install-git.ps1

@@ -1,6 +1,6 @@
 #############################################################################
 ##
-## Copyright (C) 2022 The Qt Company Ltd.
+## Copyright (C) 2021 The Qt Company Ltd.
 ## Contact: https://www.qt.io/licensing/
 ##
 ## This file is part of the provisioning scripts of the Qt Toolkit.
@@ -38,15 +38,15 @@
 #############################################################################
 . "$PSScriptRoot\helpers.ps1"
 
-# Install Git
+# Install Git version 2.31.0
 
-$version = "2.36.1"
+$version = "2.31.0"
 if (Is64BitWinHost) {
     $arch = "-64-bit"
-    $sha1 = "594bdfc4e7704fb03fe14b7c0613087dfa3d4416"
+    $sha1 = "495d78f8d961e030944d9cb53af80d909d493c3f"
 } else {
     $arch = "-32-bit"
-    $sha1 = "1bbe040254c236607ccb84e14a3f608b1a4e959a"
+    $sha1 = "e57c040aea297b363aefaf26424f2e7a84a4a173"
 }
 $gitPackage = "C:\Windows\Temp\Git-" + $version + $arch + ".exe"
 $url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\Git-" + $version + $arch + ".exe"

coin/provisioning/common/windows/install-msys2.ps1

@@ -41,10 +41,10 @@
 
 # This script will installs msys2
 
-$version = "20220319"
+$version = "20200903"
 $prog = "msys2"
 $arch = "x86_64"
-$sha1 = "d3d05090c09c08a47efbffe469142b45231cbc89"
+$sha1 = "5a1644585fac2d58855d48b4ba4a92579a14cf03"
 $sha1_prebuilt = "d86d45d72228f53f7ae060771bc95b6f54c703c8"
 $folder = "msys64"
 
@@ -69,9 +69,9 @@ if ((Test-Path $url_cache_prebuilt)) {
     Extract-tar_gz $PackagePath $TargetLocation
     $msys = "$TargetLocation\$folder\msys2_shell.cmd"
 
-    # install perl make and yasm
+    # install perl
     # Run these without 'Run-Executable' function. When using the function the gpg-agent will lock the needed tmp*.tmp file.
-    cmd /c "$msys `"-l`" `"-c`" `"rm -rf /etc/pacman.d/gnupg;pacman-key --init;pacman-key --populate msys2;pacman-key --refresh;pacman -S --noconfirm perl make yasm diffutils`""
+    cmd /c "$msys `"-l`" `"-c`" `"rm -rf /etc/pacman.d/gnupg;pacman-key --init;pacman-key --populate msys2;pacman -S --noconfirm perl make`""
     Start-Sleep -s 60
     cmd /c "$msys `"-l`" `"-c`" `"echo y | cpan -i Text::Template Test::More`""
 

coin/provisioning/common/windows/libclang.ps1

@@ -5,7 +5,7 @@ param(
 )
 . "$PSScriptRoot\helpers.ps1"
 
-$libclang_version="15.0.0"
+$libclang_version="12.0"
 Write-Output "libClang = $libclang_version" >> ~/versions.txt
 
 # PySide versions following 5.6 use a C++ parser based on Clang (http://clang.org/).
@@ -14,6 +14,7 @@ Write-Output "libClang = $libclang_version" >> ~/versions.txt
 # Starting from Qt 5.11 QDoc requires Clang to parse C++
 
 $baseDestination = "C:\Utils\libclang-" + $libclang_version + "-" + $toolchain
+$libclang_version = $libclang_version -replace '["."]'
 
 function install() {
 
@@ -38,7 +39,7 @@ $toolchainSuffix = ""
 
 if ( $toolchain -eq "vs2019" ) {
     if ( $archVer -eq 64 ) {
-        $sha1 = "e7c2d27f0e99d63e49225cb1be18c76a1e2a124b"
+        $sha1 = "44fabbd45b4b7e659c49347c156bae09d7aaffdc"
     }
     else {
         $sha1 = ""
@@ -48,7 +49,7 @@ if ( $toolchain -eq "vs2019" ) {
 
 if ( $toolchain -eq "mingw" ) {
     if ( $archVer -eq 64 ) {
-        $sha1 = "6c9300051533d5648ffe3e8ae1eb00decae8e6bf"
+        $sha1 = "9333170111aa90af6e1db824cd964dba227a4710"
     }
     else {
         $sha1 = ""
@@ -63,7 +64,7 @@ if ( $setDefault ) {
 }
 Set-EnvironmentVariable ("LLVM_INSTALL_DIR_${toolchainSuffix}") ($baseDestination + "-$archVer")
 
-if ( $libclang_version -eq "15.0.0" ) {
+if ( $libclang_version -eq "120" ) {
     # This is a hacked static build of libclang which requires special
     # handling on the qdoc side.
     Set-EnvironmentVariable "QDOC_USE_STATIC_LIBCLANG" "1"

coin/provisioning/common/windows/mesa_llvmpipe.ps1

@@ -40,12 +40,12 @@
 
 $version = "11_2_2"
 $package = "C:\Windows\temp\opengl32sw.7z"
-$mesaOpenglSha1_64 = "58f948746696b17a594b2f542e87b0e831b28dc3"
-$mesaOpenglUrl_64_cache = "http://ci-files01-hki.intra.qt.io/input/windows/opengl32sw-64-mesa_$version-signed_sha256.7z"
-$mesaOpenglUrl_64_alt = "http://download.qt.io/development_releases/prebuilt/llvmpipe/windows/opengl32sw-64-mesa_$version-signed_sha256.7z"
-$mesaOpenglSha1_32 = "974f468acaa0018d46607e2100f1214fecd35bd4"
-$mesaOpenglUrl_32_cache = "http://ci-files01-hki.intra.qt.io/input/windows/opengl32sw-32-mesa_$version-signed_sha256.7z"
-$mesaOpenglUrl_32_alt = "http://download.qt.io/development_releases/prebuilt/llvmpipe/windows/opengl32sw-32-mesa_$version-signed_sha256.7z"
+$mesaOpenglSha1_64 = "0ed35efbc8112282be5d0c87c37fde2d15e81998"
+$mesaOpenglUrl_64_cache = "http://ci-files01-hki.intra.qt.io/input/windows/opengl32sw-64-mesa_$version-signed.7z"
+$mesaOpenglUrl_64_alt = "http://download.qt.io/development_releases/prebuilt/llvmpipe/windows/opengl32sw-64-mesa_$version-signed.7z"
+$mesaOpenglSha1_32 = "96bd6ca0d7fd249fb61531dca888965ffd20f53c"
+$mesaOpenglUrl_32_cache = "http://ci-files01-hki.intra.qt.io/input/windows/opengl32sw-32-mesa_$version-signed.7z"
+$mesaOpenglUrl_32_alt = "http://download.qt.io/development_releases/prebuilt/llvmpipe/windows/opengl32sw-32-mesa_$version-signed.7z"
 
 function Extract-Mesa
 {

coin/provisioning/common/windows/squishInstall.ps1

@@ -42,12 +42,12 @@
 # This script will pre-installed squish package for Windows.
 # Squish is need by Release Test Automation (RTA)
 
-$version = "7.0.1"
-$qtBranch = "63x"
+$version = "6.7.2"
+$qtBranch = "62x"
 $targetDir = "C:\Utils\squish"
 $squishPackage = "C:\Utils\rta_squish"
 $squishUrl = "\\ci-files01-hki.intra.qt.io\provisioning\squish\jenkins_build\stable"
-$licenseUrl = "\\ci-files01-hki.intra.qt.io\provisioning\squish\coin\$qtBranch"
+$licenseUrl = "\\ci-files01-hki.intra.qt.io\provisioning\squish\coin\"
 
 # Squish license
 $licensePackage = ".squish-license"
@@ -67,7 +67,7 @@ if (($OSVersion -eq "Windows 10 Enterprise") -or ($OSVersion -eq "Windows 10 Pro
     # In Windows 11 case $OSVersion is 'Windows 10 Pro'
     $winVersion = "win10"
     if (Is64BitWinHost) {
-        $sha1 = "9c1554ba55f3d4927f89d0d939a52988272d5494"
+        $sha1 = "3dd65fe3996bffd25892d5a7dfd2da26420a3f33"
     }
 } else {
     $winVersion = "n/a"

coin/provisioning/common/windows/update-msvc2019.ps1

@@ -43,15 +43,13 @@
 # NOTE! Visual Studio is pre-installed to tier 1 image so this script won't install the whole Visual Studio. See ../../../pre-provisioning/qtci-windows-10-x86_64/msvc2019.txt
 # MSVC 2019 online installers can be found from here https://docs.microsoft.com/en-us/visualstudio/releases/2019/history#installing-an-earlier-release
 
-# NOTE! Currenlty Buildtools are not updated. There seems to be an issue with installer. When it's run twice it get stuck and can't be run again. 
-
 $version = "16.11.10"
 $urlCache_vsInstaller = "\\ci-files01-hki.intra.qt.io\provisioning\windows\msvc\vs2019_Professional_$version.exe"
 $urlOfficial_vsInstaller = "https://download.visualstudio.microsoft.com/download/pr/791f3d28-7e20-45d9-9373-5dcfbdd1f6db/cd440cf67c0cf1519131d1d51a396e44c5b4f7b68b541c9f35c05a310d692f0a/vs_Professional.exe"
 $sha1_vsInstaller = "d4f3b3b7dc28dcc3f25474cd1ca1e39fca7dcf3f"
 $urlCache_buildToolsInstaller = "\\ci-files01-hki.intra.qt.io\provisioning\windows\msvc\vs2019_BuildTools_$version.exe"
-# $urlOfficial_buildToolsInstaller = "https://download.visualstudio.microsoft.com/download/pr/791f3d28-7e20-45d9-9373-5dcfbdd1f6db/d5eabc3f4472d5ab18662648c8b6a08ea0553699819b88f89d84ec42d12f6ad7/vs_BuildTools.exe"
-# $sha1_buildToolsInstaller = "69889f45d229de8e0e76b6d9e05964477eee2e78"
+$urlOfficial_buildToolsInstaller = "https://download.visualstudio.microsoft.com/download/pr/791f3d28-7e20-45d9-9373-5dcfbdd1f6db/d5eabc3f4472d5ab18662648c8b6a08ea0553699819b88f89d84ec42d12f6ad7/vs_BuildTools.exe"
+$sha1_buildToolsInstaller = "69889f45d229de8e0e76b6d9e05964477eee2e78"
 $installerPath = "C:\Windows\Temp\installer.exe"
 
 function Install {
@@ -73,63 +71,10 @@ function Install {
     Remove-Item -Force -Path $installerPath
 }
 
-function Get-Vswhere-Property {
-    Param (
-        [ValidateSet(2017, 2019, 2022)]
-        [int] $vsYear = $(BadParam("Visual Studio Year")),
-
-        [ValidatePattern("Professional|Build *Tools|Community|Enterprise")]
-        [string] $vsEdition = $(BadParam("Visual Studio Edition")),
-
-        [string] $property = $(BadParam("vswhere property"))
-    )
-
-    $range = switch ($vsYear)
-    {
-        2017 { "[15.0,16`)" }
-        2019 { "[16.0,17`)" }
-        2022 { "[17.0,18`)" }
-    }
-
-    $vsEdition = $vsEdition -replace " ",""
-
-    $vswhereInfo = New-Object System.Diagnostics.ProcessStartInfo
-    $vswhereInfo.FileName = "${Env:ProgramFiles(x86)}\Microsoft Visual Studio\Installer\vswhere.exe"
-    $vswhereInfo.RedirectStandardError = $true
-    $vswhereInfo.RedirectStandardOutput = $true
-    $vswhereInfo.UseShellExecute = $false
-    $vswhereInfo.Arguments = "-version $range", "-latest", `
-    "-products Microsoft.VisualStudio.Product.$vsEdition", "-property $property"
-    $vswhereProcess = New-Object System.Diagnostics.Process
-    $vswhereProcess.StartInfo = $vswhereInfo
-    $vswhereProcess.Start() | Out-Null
-    $vswhereProcess.WaitForExit()
-    $stdout = $vswhereProcess.StandardOutput.ReadToEnd()
-    if ([string]::IsNullOrEmpty($stdout))
-    {
-        throw "VS edition or property $property not found by vswhere"
-    }
-    $stderr = $vswhereProcess.StandardError.ReadToEnd()
-    $vsExit = $vswhereProcess.ExitCode
-    if ($vsExit -ne 0)
-    {
-        throw "vswhere failed with exit code $vsExit. stderr: $stderr"
-    }
-    return $stdout
-}
-
 Install $urlOfficial_vsInstaller $urlCache_vsInstaller $sha1_vsInstaller
-# Install $urlOfficial_buildToolsInstaller $urlCache_buildToolsInstaller $sha1_buildToolsInstaller
+Install $urlOfficial_buildToolsInstaller $urlCache_buildToolsInstaller $sha1_buildToolsInstaller
 
-$msvc2019Version = Get-Vswhere-Property 2019 "Professional" catalog_productDisplayVersion
-$msvc2019Complete = Get-Vswhere-Property 2019 "Professional" isComplete
-$msvc2019Launchable = Get-Vswhere-Property 2019 "Professional" isLaunchable
-
-if($msvc2019Version -ne $version -or [int]$msvc2019Complete -ne 1 `
-    -or [int]$msvc2019Launchable -ne 1) {
-    throw "MSVC 2019 update failed. msvc2019Version: $($msvc2019Version) `
-        msvc2019Complete: $($msvc2019Complete) msvc2019Launchable: $($msvc2019Launchable)"
-}
+$msvc2019Version = (cmd /c "C:\Program Files (x86)\Microsoft Visual Studio\Installer\vswhere.exe" -latest -property catalog_productDisplayVersion 2`>`&1)
 
 Write-Output "Visual Studio 2019 = $msvc2019Version" >> ~\versions.txt
 Write-Output "Visual Studio 2019 Build Tools = $version" >> ~\versions.txt

coin/provisioning/qtci-linux-RHEL-8.2-x86_64/04-install-packages.sh

@@ -86,6 +86,9 @@ installPackages+=(libusbx-devel)
 installPackages+=(speech-dispatcher-devel)
 # Python 2 devel and pip. python-pip requires the EPEL repository to be added
 installPackages+=(python2-devel python2-pip)
+# Python 3 with python-devel, pip and virtualenv
+installPackages+=(python36)
+installPackages+=(python36-devel)
 # WebEngine
 installPackages+=(bison)
 installPackages+=(flex)

coin/provisioning/qtci-linux-RHEL-8.4-x86_64/90-bootstrap-autostart.sh

@@ -1,3 +0,0 @@
-#!/usr/bin/env bash
-
-source "${BASH_SOURCE%/*}/../common/linux/bootstrap-autostart.sh"

coin/provisioning/qtci-linux-RHEL-8.4-x86_64/90-install-ffmpeg.sh

@@ -1,4 +0,0 @@
-#!/usr/bin/env bash
-
-source "${BASH_SOURCE%/*}/../common/unix/install-ffmpeg.sh" "linux"
-source "${BASH_SOURCE%/*}/../common/unix/install-ffmpeg.sh" "android"

coin/provisioning/qtci-linux-RHEL-9.0-x86_64/90-bootstrap-autostart.sh

@@ -1,3 +0,0 @@
-#!/usr/bin/env bash
-
-source "${BASH_SOURCE%/*}/../common/linux/bootstrap-autostart.sh"

coin/provisioning/qtci-linux-SLES-15_SP3-x86_64/01-disable_net_lso.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-sudo mkdir -p /etc/wicked/scripts
+sudo mkdir /etc/wicked/scripts
 echo "ethtool -K \$2 tso off" | sudo tee -a /etc/wicked/scripts/net_tso_off
 sudo chmod 744 /etc/wicked/scripts/net_tso_off
 echo "PRE_UP_SCRIPT='wicked:/etc/wicked/scripts/net_tso_off'" | sudo tee -a /etc/sysconfig/network/ifcfg-eth0