Update submodules on '5.11.2' in qt5

Change-Id: Iffc768a304dedfd645219db18ce10fb77515710f
Reviewed-by: Liang Qi <liang.qi@qt.io>

.gitmodules

@@ -1,66 +1,66 @@
 [submodule "qtbase"]
 	path = qtbase
 	url = ../qtbase.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = essential
 [submodule "qtsvg"]
 	depends = qtbase
 	path = qtsvg
 	url = ../qtsvg.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtdeclarative"]
 	depends = qtbase
 	recommends = qtsvg qtxmlpatterns
 	path = qtdeclarative
 	url = ../qtdeclarative.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = essential
 [submodule "qtactiveqt"]
 	depends = qtbase
 	path = qtactiveqt
 	url = ../qtactiveqt.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtscript"]
 	depends = qtbase
 	recommends = qttools
 	path = qtscript
 	url = ../qtscript.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = deprecated
 [submodule "qtmultimedia"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtmultimedia
 	url = ../qtmultimedia.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = essential
 [submodule "qttools"]
 	depends = qtbase
 	recommends = qtdeclarative qtactiveqt
 	path = qttools
 	url = ../qttools.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = essential
 [submodule "qtxmlpatterns"]
 	depends = qtbase
 	path = qtxmlpatterns
 	url = ../qtxmlpatterns.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qttranslations"]
 	depends = qttools
 	path = qttranslations
 	url = ../qttranslations.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = essential
 	priority = 30
 [submodule "qtdoc"]
 	depends = qtdeclarative
 	path = qtdoc
 	url = ../qtdoc.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = essential
 	priority = 40
 [submodule "qtrepotools"]
@@ -81,14 +81,14 @@
 	recommends = qtdeclarative qtquickcontrols qtquickcontrols2 qtserialport
 	path = qtlocation
 	url = ../qtlocation.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtsensors"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtsensors
 	url = ../qtsensors.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtsystems"]
 	depends = qtbase
@@ -121,84 +121,77 @@
 	recommends = qtdeclarative qtandroidextras
 	path = qtconnectivity
 	url = ../qtconnectivity.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtwayland"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtwayland
 	url = ../qtwayland.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qt3d"]
 	depends = qtbase
 	recommends = qtdeclarative qtimageformats qtgamepad
 	path = qt3d
 	url = ../qt3d.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtimageformats"]
 	depends = qtbase
 	path = qtimageformats
 	url = ../qtimageformats.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
-[submodule "qtquick1"]
-	depends = qtscript
-	recommends = qtsvg qtxmlpatterns
-	path = qtquick1
-	url = ../qtquick1.git
-	branch = dev
-	status = ignore
 [submodule "qtgraphicaleffects"]
 	depends = qtdeclarative
 	path = qtgraphicaleffects
 	url = ../qtgraphicaleffects.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtquickcontrols"]
 	depends = qtdeclarative
 	recommends = qtgraphicaleffects
 	path = qtquickcontrols
 	url = ../qtquickcontrols.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = essential
 [submodule "qtserialbus"]
 	depends = qtserialport
 	path = qtserialbus
 	url = ../qtserialbus.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtserialport"]
 	depends = qtbase
 	path = qtserialport
 	url = ../qtserialport.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtx11extras"]
 	depends = qtbase
 	path = qtx11extras
 	url = ../qtx11extras.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtmacextras"]
 	depends = qtbase
 	path = qtmacextras
 	url = ../qtmacextras.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtwinextras"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtwinextras
 	url = ../qtwinextras.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtandroidextras"]
 	depends = qtbase
 	path = qtandroidextras
 	url = ../qtandroidextras.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtenginio"]
 	depends = qtdeclarative
@@ -211,108 +204,108 @@
 	recommends = qtdeclarative
 	path = qtwebsockets
 	url = ../qtwebsockets.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtwebchannel"]
 	depends = qtbase
 	recommends = qtdeclarative qtwebsockets
 	path = qtwebchannel
 	url = ../qtwebchannel.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtwebengine"]
 	depends = qtquickcontrols qtwebchannel
 	recommends = qtlocation qttools
 	path = qtwebengine
 	url = ../qtwebengine.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 	priority = 10
 [submodule "qtcanvas3d"]
 	depends = qtdeclarative
 	path = qtcanvas3d
 	url = ../qtcanvas3d.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtwebview"]
 	depends = qtdeclarative
 	recommends = qtwebengine
 	path = qtwebview
 	url = ../qtwebview.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtquickcontrols2"]
 	depends = qtgraphicaleffects
 	recommends = qtimageformats
 	path = qtquickcontrols2
 	url = ../qtquickcontrols2.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtpurchasing"]
-	depends = qtbase qtandroidextras
-	recommends = qtdeclarative
+	depends = qtbase
+	recommends = qtdeclarative qtandroidextras
 	path = qtpurchasing
 	url = ../qtpurchasing.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtcharts"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtcharts
 	url = ../qtcharts.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtdatavis3d"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtdatavis3d
 	url = ../qtdatavis3d.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtvirtualkeyboard"]
 	depends = qtbase qtdeclarative qtsvg
 	recommends = qtmultimedia qtquickcontrols
 	path = qtvirtualkeyboard
 	url = ../qtvirtualkeyboard.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtgamepad"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtgamepad
 	url = ../qtgamepad.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtscxml"]
 	depends = qtbase qtdeclarative
 	path = qtscxml
 	url = ../qtscxml.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtspeech"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtspeech
 	url = ../qtspeech.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtnetworkauth"]
 	depends = qtbase
 	path = qtnetworkauth
 	url = ../qtnetworkauth.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = addon
 [submodule "qtremoteobjects"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtremoteobjects
 	url = ../qtremoteobjects.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = preview
 [submodule "qtwebglplugin"]
 	depends = qtbase qtwebsockets
 	recommends = qtdeclarative
 	path = qtwebglplugin
 	url = ../qtwebglplugin.git
-	branch = 5.10.1
+	branch = 5.11.2
 	status = preview

LICENSE.PREVIEW.COMMERCIAL

@@ -1,628 +0,0 @@
-TECHNOLOGY PREVIEW LICENSE AGREEMENT
-
-For individuals and/or legal entities resident in the Americas (North
-America, Central America and South America), the applicable licensing
-terms are specified under the heading "Technology Preview License
-Agreement: The Americas".
-
-For individuals and/or legal entities not resident in The Americas, the
-applicable licensing terms are specified under the heading "Technology
-Preview License Agreement: Rest of the World".
-
-
-TECHNOLOGY PREVIEW LICENSE AGREEMENT: The Americas
-Agreement version 2.4
-
-This Technology Preview License Agreement ("Agreement")is a legal agreement
-between Digia USA, Inc. ("Digia"), with its registered office at 2350
-Mission College Blvd., Suite 1020, Santa Clara, California 95054,
-U.S.A. and you (either an individual or a legal entity) ("Licensee") for the
-Licensed Software (as defined below).
-
-1. DEFINITIONS
-
-"Affiliate" of a Party shall mean an entity (i) which is directly or
-indirectly controlling such Party; (ii) which is under the same direct
-or indirect ownership or control as such Party; or (iii) which is
-directly or indirectly owned or controlled by such Party. For these
-purposes, an entity shall be treated as being controlled by another if
-that other entity has fifty percent (50 %) or more of the votes in such
-entity, is able to direct its affairs and/or to control the composition
-of its board of directors or equivalent body.
-
-"Applications" shall mean Licensee's software products created using the
-Licensed Software which may include portions of the Licensed Software.
-
-"Term" shall mean the period of time six (6) months from the later of
-(a) the Effective Date; or (b) the date the Licensed Software was
-initially delivered to Licensee by Digia. If no specific Effective Date
-is set forth in the Agreement, the Effective Date shall be deemed to be
-the date the Licensed Software was initially delivered to Licensee.
-
-"Licensed Software" shall mean the computer software, "online" or
-electronic documentation, associated media and printed materials,
-including the source code, example programs and the documentation
-delivered by Digia to Licensee in conjunction with this Agreement.
-
-"Party" or "Parties" shall mean Licensee and/or Digia.
-
-
-2. OWNERSHIP
-
-The Licensed Software is protected by copyright laws and international
-copyright treaties, as well as other intellectual property laws and
-treaties. The Licensed Software is licensed, not sold.
-
-If Licensee provides any findings, proposals, suggestions or other
-feedback ("Feedback") to Digia regarding the Licensed Software, Digia
-shall own all right, title and interest including the intellectual
-property rights in and to such Feedback, excluding however any existing
-patent rights of Licensee. To the extent Licensee owns or controls any
-patents for such Feedback Licensee hereby grants to Digia and its
-Affiliates, a worldwide, perpetual, non-transferable, sublicensable,
-royalty-free license to (i) use, copy and modify Feedback and to create
-derivative works thereof, (ii) to make (and have made), use, import,
-sell, offer for sale, lease, dispose, offer for disposal or otherwise
-exploit any products or services of Digia containing Feedback, and
-(iii) sublicense all the foregoing rights to third party licensees and
-customers of Digia and/or its Affiliates.
-
-
-3. VALIDITY OF THE AGREEMENT
-
-By installing, copying, or otherwise using the Licensed Software,
-Licensee agrees to be bound by the terms of this Agreement. If Licensee
-does not agree to the terms of this Agreement, Licensee may not install,
-copy, or otherwise use the Licensed Software. Upon Licensee's acceptance
-of the terms and conditions of this Agreement, Digia grants Licensee the
-right to use the Licensed Software in the manner provided below.
-
-
-4. LICENSES
-
-4.1. Using and Copying
-
-Digia grants to Licensee a non-exclusive, non-transferable, time-limited
-license to use and copy the Licensed Software for sole purpose of
-designing, developing and testing Applications, and evaluating and the
-Licensed Software during the Term.
-
-Licensee may install copies of the Licensed Software on an unlimited
-number of computers provided that (a) if an individual, only such
-individual; or (b) if a legal entity only its employees; use the
-Licensed Software for the authorized purposes.
-
-4.2 No Distribution or Modifications
-
-Licensee may not disclose, modify, sell, market, commercialise,
-distribute, loan, rent, lease, or license the Licensed Software or any
-copy of it or use the Licensed Software for any purpose that is not
-expressly granted in this Section 4. Licensee may not alter or remove
-any details of ownership, copyright, trademark or other property right
-connected with the Licensed Software. Licensee may not distribute any
-software statically or dynamically linked with the Licensed Software. 
-
-4.3 No Technical Support
-
-Digia has no obligation to furnish Licensee with any technical support
-whatsoever. Any such support is subject to separate agreement between
-the Parties.
-
-
-5. PRE-RELEASE CODE
-The Licensed Software contains pre-release code that is not at the level
-of performance and compatibility of a final, generally available,
-product offering. The Licensed Software may not operate correctly and
-may be substantially modified prior to the first commercial product
-release, if any. Digia is not obligated to make this or any later
-version of the Licensed Software commercially available. The License
-Software is "Not for Commercial Use" and may only be used for the
-purposes described in Section 4. The Licensed Software may not be used
-in a live operating environment where it may be relied upon to perform
-in the same manner as a commercially released product or with data that
-has not been sufficiently backed up.
-
-6. THIRD PARTY SOFTWARE
-
-The Licensed Software may provide links to third party libraries or code
-(collectively "Third Party Software") to implement various functions.
-Third Party Software does not comprise part of the Licensed Software. In
-some cases, access to Third Party Software may be included along with
-the Licensed Software delivery as a convenience for development and
-testing only. Such source code and libraries may be listed in the
-".../src/3rdparty" source tree delivered with the Licensed Software or
-documented in the Licensed Software where the Third Party Software is
-used, as may be amended from time to time, do not comprise the Licensed
-Software. Licensee acknowledges (1) that some part of Third Party
-Software may require additional licensing of copyright and patents from
-the owners of such, and (2) that distribution of any of the Licensed
-Software referencing any portion of a Third Party Software may require
-appropriate licensing from such third parties.
-
-
-7. LIMITED WARRANTY AND WARRANTY DISCLAIMER
-
-The Licensed Software is licensed to Licensee "as is". To the maximum
-extent permitted by applicable law, Digia on behalf of itself and its
-suppliers, disclaims all warranties and conditions, either express or
-implied, including, but not limited to, implied warranties of
-merchantability, fitness for a particular purpose, title and
-non-infringement with regard to the Licensed Software.
-
-
-8. LIMITATION OF LIABILITY
-
-If, Digia's warranty disclaimer notwithstanding, Digia is held liable to
-Licensee, whether in contract, tort or any other legal theory, based on
-the Licensed Software, Digia's entire liability to Licensee and
-Licensee's exclusive remedy shall be, at Digia's option, either (A)
-return of the price Licensee paid for the Licensed Software, or (B)
-repair or replacement of the Licensed Software, provided Licensee
-returns to Digia all copies of the Licensed Software as originally
-delivered to Licensee. Digia shall not under any circumstances be liable
-to Licensee based on failure of the Licensed Software if the failure
-resulted from accident, abuse or misapplication, nor shall Digia under
-any circumstances be liable for special damages, punitive or exemplary
-damages, damages for loss of profits or interruption of business or for
-loss or corruption of data. Any award of damages from Digia to Licensee
-shall not exceed the total amount Licensee has paid to Digia in
-connection with this Agreement.
-
-
-9.  CONFIDENTIALITY
-
-Each party acknowledges that during the Term of this Agreement it shall
-have access to information about the other party's business, business
-methods, business plans, customers, business relations, technology, and
-other information, including the terms of this Agreement, that is
-confidential and of great value to the other party, and the value of
-which would be significantly reduced if disclosed to third parties (the
-"Confidential Information"). Accordingly, when a party (the "Receiving
-Party") receives Confidential Information from another party (the
-"Disclosing Party"), the Receiving Party shall, and shall obligate its
-employees and agents and employees and agents of its Affiliates to: (i)
-maintain the Confidential Information in strict confidence; (ii) not
-disclose the Confidential Information to a third party without the
-Disclosing Party's prior written approval; and (iii) not, directly or
-indirectly, use the Confidential Information for any purpose other than
-for exercising its rights and fulfilling its responsibilities pursuant
-to this Agreement. Each party shall take reasonable measures to protect
-the Confidential Information of the other party, which measures shall
-not be less than the measures taken by such party to protect its own
-confidential and proprietary information.
-
-"Confidential Information" shall not include information that (a) is or
-becomes generally known to the public through no act or omission of the
-Receiving Party; (b) was in the Receiving Party's lawful possession
-prior to the disclosure hereunder and was not subject to limitations on
-disclosure or use; (c) is developed by the Receiving Party without
-access to the Confidential Information of the Disclosing Party or by
-persons who have not had access to the Confidential Information of the
-Disclosing Party as proven by the written records of the Receiving
-Party; (d) is lawfully disclosed to the Receiving Party without
-restrictions, by a third party not under an obligation of
-confidentiality; or (e) the Receiving Party is legally compelled to
-disclose the information, in which case the Receiving Party shall assert
-the privileged and confidential nature of the information and cooperate
-fully with the Disclosing Party to protect against and prevent
-disclosure of any Confidential Information and to limit the scope of
-disclosure and the dissemination of disclosed Confidential Information
-by all legally available means.
-
-The obligations of the Receiving Party under this Section shall continue
-during the Initial Term and for a period of five (5) years after
-expiration or termination of this Agreement. To the extent that the
-terms of the Non-Disclosure Agreement between Digia and Licensee
-conflict with the terms of this Section 9, this Section 9 shall be
-controlling over the terms of the Non-Disclosure Agreement.
-
-
-10. GENERAL PROVISIONS
-
-10.1    No Assignment
-
-Licensee shall not be entitled to assign or transfer all or any of its
-rights, benefits and obligations under this Agreement without the prior
-written consent of Digia, which shall not be unreasonably withheld.
-
-10.2    Termination
-
-Digia may terminate the Agreement at any time immediately upon written
-notice by Digia to Licensee if Licensee breaches this Agreement.
-
-Upon termination of this Agreement, Licensee shall return to Digia all
-copies of Licensed Software that were supplied by Digia. All other
-copies of Licensed Software in the possession or control of Licensee
-must be erased or destroyed. An officer of Licensee must promptly
-deliver to Digia a written confirmation that this has occurred.
-
-10.3    Surviving Sections
-
-Any terms and conditions that by their nature or otherwise reasonably
-should survive a cancellation or termination of this Agreement shall
-also be deemed to survive. Such terms and conditions include, but are
-not limited to the following Sections: 2, 5, 6, 7, 8, 9, 10.2, 10.3, 10.4,
-10.5, 10.6, 10.7, and 10.8 of this Agreement.
-
-10.4    Entire Agreement
-
-This Agreement constitutes the complete agreement between the parties
-and supersedes all prior or contemporaneous discussions,
-representations, and proposals, written or oral, with respect to the
-subject matters discussed herein, with the exception of the
-non-disclosure agreement executed by the parties in connection with this
-Agreement ("Non-Disclosure Agreement"), if any, shall be subject to
-Section 9. No modification of this Agreement shall be effective unless
-contained in a writing executed by an authorized representative of each
-party. No term or condition contained in Licensee's purchase order shall
-apply unless expressly accepted by Digia in writing. If any provision of
-the Agreement is found void or unenforceable, the remainder shall remain
-valid and enforceable according to its terms. If any remedy provided is
-determined to have failed for its essential purpose, all limitations of
-liability and exclusions of damages set forth in this Agreement shall
-remain in effect.
-
-10.5    Export Control
-
-Licensee acknowledges that the Licensed Software may be subject to
-export control restrictions of various countries. Licensee shall fully
-comply with all applicable export license restrictions and requirements
-as well as with all laws and regulations relating to the importation of
-the Licensed Software and shall procure all necessary governmental
-authorizations, including without limitation, all necessary licenses,
-approvals, permissions or consents, where necessary for the
-re-exportation of the Licensed Software.,
-
-10.6    Governing Law and Legal Venue
-
-This Agreement shall be governed by and construed in accordance with the
-federal laws of the United States of America and the internal laws of
-the State of New York without given effect to any choice of law rule
-that would result in the application of the laws of any other
-jurisdiction. The United Nations Convention on Contracts for the
-International Sale of Goods (CISG) shall not apply. Each Party (a)
-hereby irrevocably submits itself to and consents to the jurisdiction of
-the United States District Court for the Southern District of New York
-(or if such court lacks jurisdiction, the state courts of the State of
-New York) for the purposes of any action, claim, suit or proceeding
-between the Parties in connection with any controversy, claim, or
-dispute arising out of or relating to this Agreement; and (b) hereby
-waives, and agrees not to assert by way of motion, as a defense or
-otherwise, in any such action, claim, suit or proceeding, any claim that
-is not personally subject to the jurisdiction of such court(s), that the
-action, claim, suit or proceeding is brought in an inconvenient forum or
-that the venue of the action, claim, suit or proceeding is improper.
-Notwithstanding the foregoing, nothing in this Section 9.6 is intended
-to, or shall be deemed to, constitute a submission or consent to, or
-selection of, jurisdiction, forum or venue for any action for patent
-infringement, whether or not such action relates to this Agreement.
-
-10.7    No Implied License
-
-There are no implied licenses or other implied rights granted under this
-Agreement, and all rights, save for those expressly granted hereunder,
-shall remain with Digia and its licensors. In addition, no licenses or
-immunities are granted to the combination of the Licensed Software with
-any other software or hardware not delivered by Digia under this
-Agreement.
-
-10.8    Government End Users
-
-A "U.S. Government End User" shall mean any agency or entity of the
-government of the United States. The following shall apply if Licensee
-is a U.S. Government End User. The Licensed Software is a "commercial
-item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995),
-consisting of "commercial computer software" and "commercial computer
-software documentation," as such terms are used in 48 C.F.R. 12.212
-(Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1
-through 227.7202-4 (June 1995), all U.S. Government End Users acquire
-the Licensed Software with only those rights set forth herein. The
-Licensed Software (including related documentation) is provided to U.S.
-Government End Users: (a) only as a commercial end item; and (b) only
-pursuant to this Agreement.
-
-
-
-
-
-TECHNOLOGY PREVIEW LICENSE AGREEMENT: Rest of the World
-Agreement version 2.4
-
-This Technology Preview License Agreement ("Agreement") is a legal
-agreement between Digia Finland Ltd ("Digia"), with its registered office at
-Valimotie 21,FI-00380 Helsinki, Finland and you (either an individual or a
-legal entity) ("Licensee") for the Licensed Software.
-
-1. DEFINITIONS
-
-"Affiliate" of a Party shall mean an entity (i) which is directly or
-indirectly controlling such Party; (ii) which is under the same direct
-or indirect ownership or control as such Party; or (iii) which is
-directly or indirectly owned or controlled by such Party. For these
-purposes, an entity shall be treated as being controlled by another if
-that other entity has fifty percent (50 %) or more of the votes in such
-entity, is able to direct its affairs and/or to control the composition
-of its board of directors or equivalent body.
-
-"Applications" shall mean Licensee's software products created using the
-Licensed Software which may include portions of the Licensed Software.
-
-"Term" shall mean the period of time six (6) months from the later of
-(a) the Effective Date; or (b) the date the Licensed Software was
-initially delivered to Licensee by Digia. If no specific Effective Date
-is set forth in the Agreement, the Effective Date shall be deemed to be
-the date the Licensed Software was initially delivered to Licensee.
-
-"Licensed Software" shall mean the computer software, "online" or
-electronic documentation, associated media and printed materials,
-including the source code, example programs and the documentation
-delivered by Digia to Licensee in conjunction with this Agreement.
-
-"Party" or "Parties" shall mean Licensee and/or Digia.
-
-
-2. OWNERSHIP
-
-The Licensed Software is protected by copyright laws and international
-copyright treaties, as well as other intellectual property laws and
-treaties. The Licensed Software is licensed, not sold.
-
-If Licensee provides any findings, proposals, suggestions or other
-feedback ("Feedback") to Digia regarding the Licensed Software, Digia
-shall own all right, title and interest including the intellectual
-property rights in and to such Feedback, excluding however any existing
-patent rights of Licensee. To the extent Licensee owns or controls any
-patents for such Feedback Licensee hereby grants to Digia and its
-Affiliates, a worldwide, perpetual, non-transferable, sublicensable,
-royalty-free license to (i) use, copy and modify Feedback and to create
-derivative works thereof, (ii) to make (and have made), use, import,
-sell, offer for sale, lease, dispose, offer for disposal or otherwise
-exploit any products or services of Digia containing Feedback, and
-(iii) sublicense all the foregoing rights to third party licensees and
-customers of Digia and/or its Affiliates.
-
-3. VALIDITY OF THE AGREEMENT
-
-By installing, copying, or otherwise using the Licensed Software,
-Licensee agrees to be bound by the terms of this Agreement. If Licensee
-does not agree to the terms of this Agreement, Licensee may not install,
-copy, or otherwise use the Licensed Software. Upon Licensee's acceptance
-of the terms and conditions of this Agreement, Digia grants Licensee the
-right to use the Licensed Software in the manner provided below.
-
-
-4. LICENSES
-
-4.1. Using and Copying
-
-Digia grants to Licensee a non-exclusive, non-transferable, time-limited
-license to use and copy the Licensed Software for sole purpose of
-designing, developing and testing Applications, and evaluating and the
-Licensed Software during the Term.
-
-Licensee may install copies of the Licensed Software on an unlimited
-number of computers provided that (a) if an individual, only such
-individual; or (b) if a legal entity only its employees; use the
-Licensed Software for the authorized purposes.
-
-4.2	No Distribution or Modifications
-
-Licensee may not disclose, modify, sell, market, commercialise,
-distribute, loan, rent, lease, or license the Licensed Software or any
-copy of it or use the Licensed Software for any purpose that is not
-expressly granted in this Section 4. Licensee may not alter or remove
-any details of ownership, copyright, trademark or other property right
-connected with the Licensed Software. Licensee may not distribute any
-software statically or dynamically linked with the Licensed Software.
-
-4.3 No Technical Support
-
-Digia has no obligation to furnish Licensee with any technical support
-whatsoever. Any such support is subject to separate agreement between
-the Parties.
-
-
-5. PRE-RELEASE CODE
-
-The Licensed Software contains pre-release code that is not at the level
-of performance and compatibility of a final, generally available,
-product offering. The Licensed Software may not operate correctly and
-may be substantially modified prior to the first commercial product
-release, if any. Digia is not obligated to make this or any later
-version of the Licensed Software commercially available. The License
-Software is "Not for Commercial Use" and may only be used for the
-purposes described in Section 4. The Licensed Software may not be used
-in a live operating environment where it may be relied upon to perform
-in the same manner as a commercially released product or with data that
-has not been sufficiently backed up.
-
-6. THIRD PARTY SOFTWARE
-
-The Licensed Software may provide links to third party libraries or code
-(collectively "Third Party Software") to implement various functions.
-Third Party Software does not comprise part of the Licensed Software. In
-some cases, access to Third Party Software may be included along with
-the Licensed Software delivery as a convenience for development and
-testing only. Such source code and libraries may be listed in the
-".../src/3rdparty" source tree delivered with the Licensed Software or
-documented in the Licensed Software where the Third Party Software is
-used, as may be amended from time to time, do not comprise the Licensed
-Software. Licensee acknowledges (1) that some part of Third Party
-Software may require additional licensing of copyright and patents from
-the owners of such, and (2) that distribution of any of the Licensed
-Software referencing any portion of a Third Party Software may require
-appropriate licensing from such third parties.
-
-
-7. LIMITED WARRANTY AND WARRANTY DISCLAIMER
-
-The Licensed Software is licensed to Licensee "as is". To the maximum
-extent permitted by applicable law, Digia on behalf of itself and its
-suppliers, disclaims all warranties and conditions, either express or
-implied, including, but not limited to, implied warranties of
-merchantability, fitness for a particular purpose, title and
-non-infringement with regard to the Licensed Software.
-
-
-8. LIMITATION OF LIABILITY
-
-If, Digia's warranty disclaimer notwithstanding, Digia is held liable to
-Licensee, whether in contract, tort or any other legal theory, based on
-the Licensed Software, Digia's entire liability to Licensee and
-Licensee's exclusive remedy shall be, at Digia's option, either (A)
-return of the price Licensee paid for the Licensed Software, or (B)
-repair or replacement of the Licensed Software, provided Licensee
-returns to Digia all copies of the Licensed Software as originally
-delivered to Licensee. Digia shall not under any circumstances be liable
-to Licensee based on failure of the Licensed Software if the failure
-resulted from accident, abuse or misapplication, nor shall Digia under
-any circumstances be liable for special damages, punitive or exemplary
-damages, damages for loss of profits or interruption of business or for
-loss or corruption of data. Any award of damages from Digia to Licensee
-shall not exceed the total amount Licensee has paid to Digia in
-connection with this Agreement.
-
-
-9.	CONFIDENTIALITY
-
-Each party acknowledges that during the Term of this Agreement it shall
-have access to information about the other party's business, business
-methods, business plans, customers, business relations, technology, and
-other information, including the terms of this Agreement, that is
-confidential and of great value to the other party, and the value of
-which would be significantly reduced if disclosed to third parties (the
-"Confidential Information"). Accordingly, when a party (the "Receiving
-Party") receives Confidential Information from another party (the
-"Disclosing Party"), the Receiving Party shall, and shall obligate its
-employees and agents and employees and agents of its Affiliates to: (i)
-maintain the Confidential Information in strict confidence; (ii) not
-disclose the Confidential Information to a third party without the
-Disclosing Party's prior written approval; and (iii) not, directly or
-indirectly, use the Confidential Information for any purpose other than
-for exercising its rights and fulfilling its responsibilities pursuant
-to this Agreement. Each party shall take reasonable measures to protect
-the Confidential Information of the other party, which measures shall
-not be less than the measures taken by such party to protect its own
-confidential and proprietary information.
-
-"Confidential Information" shall not include information that (a) is or
-becomes generally known to the public through no act or omission of the
-Receiving Party; (b) was in the Receiving Party's lawful possession
-prior to the disclosure hereunder and was not subject to limitations on
-disclosure or use; (c) is developed by the Receiving Party without
-access to the Confidential Information of the Disclosing Party or by
-persons who have not had access to the Confidential Information of the
-Disclosing Party as proven by the written records of the Receiving
-Party; (d) is lawfully disclosed to the Receiving Party without
-restrictions, by a third party not under an obligation of
-confidentiality; or (e) the Receiving Party is legally compelled to
-disclose the information, in which case the Receiving Party shall assert
-the privileged and confidential nature of the information and cooperate
-fully with the Disclosing Party to protect against and prevent
-disclosure of any Confidential Information and to limit the scope of
-disclosure and the dissemination of disclosed Confidential Information
-by all legally available means.
-
-The obligations of the Receiving Party under this Section shall continue
-during the Initial Term and for a period of five (5) years after
-expiration or termination of this Agreement. To the extent that the
-terms of the Non-Disclosure Agreement between Digia and Licensee
-conflict with the terms of this Section 9, this Section 9 shall be
-controlling over the terms of the Non-Disclosure Agreement.
-
-
-10. GENERAL PROVISIONS
-
-10.1	No Assignment
-
-Licensee shall not be entitled to assign or transfer all or any of its
-rights, benefits and obligations under this Agreement without the prior
-written consent of Digia, which shall not be unreasonably withheld.
-
-10.2 	Termination
-
-Digia may terminate the Agreement at any time immediately upon written
-notice by Digia to Licensee if Licensee breaches this Agreement.
-
-Upon termination of this Agreement, Licensee shall return to Digia all
-copies of Licensed Software that were supplied by Digia. All other
-copies of Licensed Software in the possession or control of Licensee
-must be erased or destroyed. An officer of Licensee must promptly
-deliver to Digia a written confirmation that this has occurred.
-
-10.3    Surviving Sections
-
-Any terms and conditions that by their nature or otherwise reasonably
-should survive a cancellation or termination of this Agreement shall
-also be deemed to survive. Such terms and conditions include, but are
-not limited to the following Sections: 2, 5, 6, 7, 8, 9, 10.2, 10.3, 10.4,
-10.5, 10.6, 10.7, and 10.8 of this Agreement. 
-
-10.4    Entire Agreement
-
-This Agreement constitutes the complete agreement between the parties
-and supersedes all prior or contemporaneous discussions,
-representations, and proposals, written or oral, with respect to the
-subject matters discussed herein, with the exception of the
-non-disclosure agreement executed by the parties in connection with this
-Agreement ("Non-Disclosure Agreement"), if any, shall be subject to
-Section 9. No modification of this Agreement shall be effective unless
-contained in a writing executed by an authorized representative of each
-party. No term or condition contained in Licensee's purchase order shall
-apply unless expressly accepted by Digia in writing. If any provision of
-the Agreement is found void or unenforceable, the remainder shall remain
-valid and enforceable according to its terms. If any remedy provided is
-determined to have failed for its essential purpose, all limitations of
-liability and exclusions of damages set forth in this Agreement shall
-remain in effect.
-
-10.5    Export Control
-
-Licensee acknowledges that the Licensed Software may be subject to
-export control restrictions of various countries. Licensee shall fully
-comply with all applicable export license restrictions and requirements
-as well as with all laws and regulations relating to the importation of
-the Licensed Software and shall procure all necessary governmental
-authorizations, including without limitation, all necessary licenses,
-approvals, permissions or consents, where necessary for the
-re-exportation of the Licensed Software.,
-
-10.6    Governing Law and Legal Venue
-
-This Agreement shall be construed and interpreted in accordance with the
-laws of Finland, excluding its choice of law provisions. Any disputes
-arising out of or relating to this Agreement shall be resolved in
-arbitration under the Rules of Arbitration of the Chamber of Commerce of
-Helsinki, Finland. The arbitration tribunal shall consist of one (1), or
-if either Party so requires, of three (3), arbitrators. The award shall
-be final and binding and enforceable in any court of competent
-jurisdiction. The arbitration shall be held in Helsinki, Finland and the
-process shall be conducted in the English language.
-
-10.7    No Implied License
-
-There are no implied licenses or other implied rights granted under this
-Agreement, and all rights, save for those expressly granted hereunder,
-shall remain with Digia and its licensors. In addition, no licenses or
-immunities are granted to the combination of the Licensed Software with
-any other software or hardware not delivered by Digia under this
-Agreement.
-
-10.8    Government End Users
-
-A "U.S. Government End User" shall mean any agency or entity of the
-government of the United States. The following shall apply if Licensee
-is a U.S. Government End User. The Licensed Software is a "commercial
-item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995),
-consisting of "commercial computer software" and "commercial computer
-software documentation," as such terms are used in 48 C.F.R. 12.212
-(Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1
-through 227.7202-4 (June 1995), all U.S. Government End Users acquire
-the Licensed Software with only those rights set forth herein. The
-Licensed Software (including related documentation) is provided to U.S.
-Government End Users: (a) only as a commercial end item; and (b) only
-pursuant to this Agreement.
-
-
-
-

LICENSE.QT-LICENSE-AGREEMENT-4.0

@@ -0,0 +1,913 @@
+QT LICENSE AGREEMENT
+Agreement version 4.0
+
+This License Agreement ("Agreement") is a legal agreement between The Qt
+Company (as defined below) and the Licensee (as defined below) for the license
+of Licensed Software (as defined below). Capitalized terms used herein are
+defined in Section 1.
+
+WHEREAS:
+
+(A). Licensee wishes to use the Licensed Software for the purpose of developing
+and distributing Applications and/or Devices; and
+
+(B). The Qt Company is willing to grant the Licensee a right to use Licensed
+Software for such purpose pursuant to term and conditions of this Agreement.
+
+NOW, THEREFORE, THE PARTIES HEREBY AGREE AS FOLLOWS:
+
+1. DEFINITIONS
+
+"Affiliate" of a Party shall mean an entity (i) which is directly or indirectly
+controlling such Party; (ii) which is under the same direct or indirect
+ownership or control as such Party; or (iii) which is directly or indirectly
+owned or controlled by such Party.  For these purposes, an entity shall be
+treated as being controlled by another if that other entity has fifty percent
+(50 %) or more of the votes in such entity, is able to direct its affairs
+and/or to control the composition of its board of directors or equivalent body.
+
+"Applications" shall mean Licensee's software products created using the
+Licensed Software, which may include the Redistributables, or part
+thereof.
+
+"Contractor(s)" shall mean third party consultants, distributors and
+contractors performing services to a Party under applicable contractual
+arrangement.
+
+"Customer(s)" shall mean Licensee's end users to whom Licensee, directly or
+indirectly, distributes copies of the Redistributables.
+
+"Deployment Platforms" shall mean operating systems specified in the License
+Certificate, in which the Redistributables can be distributed pursuant to the
+terms and conditions of this Agreement.
+
+"Designated User(s)" shall mean the employee(s) of Licensee or Licensee's
+Affiliates acting within the scope of their employment or Licensee's
+Contractors acting within the scope of their services for Licensee and on
+behalf of Licensee. Designated Users shall be named in the License Certificate.
+
+"Development License" shall mean the license needed by the Licensee for each
+Designated User to use the Licensed Software under the license grant described
+in Section 3.1 of this Agreement.
+
+"Development Platforms" shall mean those operating systems specified in the
+License Certificate, in which the Licensed Software can be used under the
+Development License, but not distributed in any form or used for any other
+purpose.
+
+"Devices" shall mean hardware devices or products that 1) are manufactured
+and/or distributed by the Licensee or its Affiliates or Contractors, and
+(2)(i) incorporate or integrate the Redistributables or parts thereof; or (ii)
+do not incorporate or integrate the Redistributables at the time of
+distribution, but where, when used by a Customer, the main user interface or
+substantial functionality of such device is provided by Application(s) or
+otherwise depends on the Licensed Software.
+
+"Distribution License(s)" shall mean the license required for distribution of
+Redistributables in connection with Devices pursuant to license grant described
+in Section 3.3 of this Agreement.
+
+"Distribution License Packs" shall mean set of prepaid Distribution Licenses
+for distribution of Redistributables, as defined in The Qt Company's standard
+price list, quote, Purchase Order confirmation or in an appendix hereto,
+as the case may be.
+
+"Intellectual Property Rights" shall mean patents (including utility models),
+design patents, and designs (whether or not capable of registration), chip
+topography rights and other like protection, copyrights, trademarks, service
+marks, trade names, logos or other words or symbols and any other form of
+statutory protection of any kind and applications for any of the foregoing as
+well as any trade secrets.
+
+"License Certificate" shall mean a certificate generated by The Qt Company for
+each Designated User respectively upon them downloading the licensed Software.
+License Certificate will be available under respective Designated User's Qt
+Account at account.qt.io and it will specify the Designated User, the
+Development Platforms, Deployment Platforms and the License Term. The terms of
+the License Certificate are considered part of this Agreement and shall be
+updated from time to time to reflect any agreed changes to the foregoing terms
+relating to Designated User's rights to the Licensed Software.
+
+"License Fee" shall mean the fee charged to the Licensee for rights granted
+under the terms of this Agreement.
+
+"License Term" shall mean the agreed validity period of the Development
+License of the respective Designated User, during which time the
+Designated User is entitled to use the Licensed Software, as set forth in the
+respective License Certificate.
+
+"Licensed Software" shall mean all versions of the
+
+(i) Qt Toolkit (including Qt Essentials, Qt Add-Ons and Value-Add modules) as
+described in http://doc.qt.io/qt-5/qtmodules.html,
+
+(ii) Qt Creator (including Creator IDE tool) as described in
+http://doc.qt.io/qtcreator/index.html,
+
+(iii) Qt 3D Studio as described in http://doc.qt.io/qt3dstudio/index.html, and
+
+as well as corresponding online or electronic documentation, associated media
+and printed materials, including the source code, example programs and the
+documentation, licensed to the Licensee under this Agreement. Licensed Software
+does not include Third Party Software (as defined in Section 4), Open Source
+Qt, or other software products of The Qt Company (for example Qt Safe Renderer
+and Qt for Automation), unless such other software products of The Qt Company
+are separately agreed in writing to be included in scope of the Licensed
+Software.
+
+"Licensee" shall mean the individual or legal entity that is party to this
+Agreement, as identified on the signature page hereof.
+
+"Licensee's Records" shall mean books and records that are likely to contain
+information bearing on Licensee's compliance with this Agreement or the
+payments due to The Qt Company under this Agreement, including, but not limited
+to: assembly logs, sales records and distribution records.
+
+"Modified Software" shall have the meaning as set forth in Section 2.3.
+
+"Online Services" shall mean any services or access to systems made available
+by The Qt Company to the Licensee over the Internet relating to the Licensed
+Software or for the purpose of use by the Licensee of the Licensed Software or
+Support. Use of any such Online Services is discretionary for the Licensee and
+some of them may be subject to additional fees.
+
+"Open Source Qt" shall mean the non-commercial Qt computer software products,
+licensed under the terms of the GNU Lesser General Public License, version
+2.1 or later ("LGPL") or the GNU General Public License, version 2.0 or later
+("GPL"). For clarity, Open Source Qt shall not be provided nor governed under
+this Agreement.
+
+"Party" or "Parties" shall mean Licensee and/or The Qt Company.
+
+"Redistributables" shall mean the portions of the Licensed Software set forth
+in Appendix 1, Section 1 that may be distributed pursuant to the terms of this
+Agreement in object code form only, including any relevant documentation.
+Where relevant, any reference to Licensed Software in this Agreement shall
+include and refer also to Redistributables.
+
+"Renewal Term" shall mean an extension of previous License Term as agreed
+between the Parties.
+
+"Submitted Modified Software" shall have the meaning as set forth in
+Section 2.3.
+
+"Support" shall mean standard developer support that is provided by The Qt
+Company to assist Designated Users in using the Licensed Software in
+accordance with The Qt Company's standard support terms and as further
+defined in Section 8 hereunder.
+
+"Taxes" shall have the meaning set forth in Section 10.5.
+
+"Term" shall have the meaning set forth in Section 12.
+
+"The Qt Company" shall mean:
+
+(i) in the event Licensee is an individual residing in the United States or a
+legal entity incorporated in the United States or having its headquarters in
+the United States, The Qt Company Inc., a Delaware corporation with its office
+at 2350 Mission College Blvd., Suite 1020, Santa Clara, CA 95054, USA.; or
+
+(ii) in the event the Licensee is an individual residing outside of the United
+States or a legal entity incorporated outside of the United States or having
+its registered office outside of the United States, The Qt Company Ltd., a
+Finnish company with its registered office at Bertel Jungin aukio D3A, 02600
+Espoo, Finland.
+
+"Third Party Software " shall have the meaning set forth in Section 4.
+
+"Updates" shall mean a release or version of the Licensed Software containing
+bug fixes, error corrections and other changes that are generally made
+available to users of the Licensed Software that have contracted for Support.
+Updates are generally depicted as a change to the digits following the decimal
+in the Licensed Software version number. The Qt Company shall make Updates
+available to the Licensee under the Support. Updates shall be considered as
+part of the Licensed Software hereunder.
+
+"Upgrades" shall mean a release or version of the Licensed Software containing
+enhancements and new features and are generally depicted as a change to the
+first digit of the Licensed Software version number. In the event Upgrades are
+provided to the Licensee under this Agreement, they shall be considered as
+part of the Licensed Software hereunder.
+
+2. OWNERSHIP
+
+2.1 Ownership of The Qt Company
+
+The Licensed Software is protected by copyright laws and international
+copyright treaties, as well as other intellectual property laws and treaties.
+The Licensed Software is licensed, not sold.
+
+All The Qt Company's Intellectual Property Rights are and shall remain the
+exclusive property of The Qt Company or its licensors respectively.
+
+2.2 Ownership of Licensee
+
+All the Licensee's Intellectual Property Rights are and shall remain the
+exclusive property of the Licensee or its licensors respectively.
+
+All Intellectual Property Rights to the Modified Software, Applications and
+Devices shall remain with the Licensee and no rights thereto shall be granted
+by the Licensee to The Qt Company under this Agreement (except as set forth in
+Section 2.3 below).
+
+2.3 Modified Software
+
+Licensee may create bug-fixes, error corrections, patches or modifications to
+the Licensed Software ("Modified Software"). Such Modified Software may break
+the source or binary compatibility with the Licensed Software (including
+without limitation through changing the application programming interfaces
+("API") or by adding, changing or deleting any variable, method, or class
+signature in the Licensed Software and/or any inter-process protocols, services
+or standards in the Licensed Software libraries). To the extent that Licensee's
+Modified Software so breaks source or binary compatibility with the Licensed
+Software, Licensee acknowledges that The Qt Company's ability to provide
+Support may be prevented or limited and Licensee's ability to make use of
+Updates may be restricted.
+
+Licensee may, at its sole and absolute discretion, choose to submit Modified
+Software to The Qt Company ("Submitted Modified Software") in connection with
+Licensee's Support request, service request or otherwise. In the event Licensee
+does so, then, Licensee hereby grants The Qt Company a sublicensable,
+assignable, irrevocable, perpetual, worldwide, non-exclusive, royalty-free and
+fully paid-up license, under all of Licensee's Intellectual Property Rights, to
+reproduce, adapt, translate, modify, and prepare derivative works of, publicly
+display, publicly perform, sublicense, make available and distribute such
+Submitted Modified Software as The Qt Company sees fit at its free and absolute
+discretion.
+
+3. LICENSES GRANTED
+
+3.1 Development with Licensed Software
+
+Subject to the terms of this Agreement, The Qt Company grants to Licensee a
+personal, worldwide, non-exclusive, non-transferable license, valid for the
+License Term, to use, modify and copy the Licensed Software by Designated Users
+on the Development Platforms for the sole purposes of designing, developing,
+demonstrating and testing Application(s) and/or Devices, and to provide thereto
+related support and other related services to end-user Customers.
+
+Licensee may install copies of the Licensed Software on an unlimited number of
+computers provided that (i) only the Designated Users may use the Licensed
+Software, and (ii) all Designated Users must have a valid Development License
+to use Licensed Software.
+
+Licensee may at any time designate another Designated User to replace a then-
+current Designated User by notifying The Qt Company in writing, provided that
+any Designated User may be replaced only once during any six-month period.
+
+Upon expiry of the initially agreed License Term, the respective License Terms
+shall be automatically extended to one or more Renewal Term(s), unless and
+until either Party notifies the other Party in writing that it does not wish to
+continue the License Term, such notification to be provided to the other Party
+no less than ninety (90) days before expiry of the respective License Term.
+Unless otherwise agreed between the Parties, Renewal Term shall be of equal
+length with the initial Term.
+
+Any such Renewal Term shall be subject to License Fees agreed between the
+Parties or, if no advance agreement exists, subject to The Qt Company's
+standard pricing applicable at the commencement date of any such Renewal Term.
+
+3.2 Distribution of Applications
+
+Subject to the terms of this Agreement, The Qt Company grants to Licensee a
+personal, worldwide, non-exclusive, non-transferable, revocable (for cause
+pursuant to this Agreement) right and license, valid for the Term, to
+
+(i) distribute, by itself or through its Contractors, Redistributables as
+installed, incorporated or integrated into Applications for execution on the
+Deployment Platforms, and
+
+(ii) grant sublicenses to Redistributables, as distributed hereunder, for
+Customers solely for Customer's internal use and to the extent necessary in
+order for the Customers to use the Applications for their respective intended
+purposes.
+
+Right to distribute the Redistributables as part of an Application as provided
+herein is not royalty-bearing but is conditional upon the Licensee having paid
+the agreed Development Licenses from The Qt Company before distributing any
+Redistributables to Customers.
+
+3.3 Distribution of Devices
+
+Subject to the terms of this Agreement, The Qt Company grants to Licensee a
+personal, worldwide, non-exclusive, non-transferable, revocable (for cause
+pursuant to this Agreement) right and license, valid for the Term, to
+
+(i) distribute, by itself or through one or more tiers of Contractors,
+Redistributables as installed, incorporated or integrated, or intended to be
+installed, incorporated or integrated into Devices for execution on the
+Deployment Platforms, and
+
+(ii) grant sublicenses to Redistributables, as distributed hereunder, for
+Customers solely for Customer's internal use and to the extent necessary in
+order for the Customers to use the Devices for their respective intended
+purposes.
+
+Right to distribute the Redistributables with Devices as provided herein is
+conditional upon the Licensee having purchased and paid the appropriate amount
+of Development and Distribution Licenses from The Qt Company before
+distributing any Redistributables to Customers.
+
+3.4 Further Requirements
+
+The licenses granted above in this Section 3 by The Qt Company to Licensee are
+conditional and subject to Licensee's compliance with the following terms:
+
+(i) Licensee shall not remove or alter any copyright, trademark or other
+proprietary rights notice contained in any portion of the Licensed Software;
+
+(ii) Applications must add primary and substantial functionality to the
+Licensed Software;
+
+(iii) Applications may not pass on functionality which in any way makes it
+possible for others to create software with the Licensed Software; provided
+however that Licensee may use the Licensed Software's scripting and QML ("Qt
+Quick") functionality solely in order to enable scripting, themes and styles
+that augment the functionality and appearance of the Application(s) without
+adding primary and substantial functionality to the Application(s);
+
+(iv) Applications must not compete with the Licensed Software;
+
+(v) Licensee shall not use The Qt Company's or any of its suppliers' names,
+logos, or trademarks to market Applications, except that Licensee may use
+"Built with Qt" logo to indicate that Application(s) was developed using the
+Licensed Software;
+
+(vi) Licensee shall not distribute, sublicense or disclose source code of
+Licensed Software to any third party (provided however that Licensee may
+appoint employee(s) of Contractors as Designated Users to use Licensed
+Software pursuant to this Agreement). Such right may be available for the
+Licensee subject to a separate software development kit ("SDK") license
+agreement to be concluded with The Qt Company;
+
+(vii) Licensee shall not grant the Customers a right to (i) make copies of the
+Redistributables except when and to the extent required to use the Applications
+and/or Devices for their intended purpose, (ii) modify the Redistributables or
+create derivative works thereof, (iii) decompile, disassemble or otherwise
+reverse engineer Redistributables, or (iv) redistribute any copy or portion of
+the Redistributables to any third party, except as part of the onward sale of
+the Device on which the Redistributables are installed;
+
+(viii) Licensee shall not and shall cause that its Affiliates or Contractors
+shall not a) in any way combine, incorporate or integrate Licensed Software
+with, or use Licensed Software for creation of, any software created with or
+incorporating Open Source Qt, or b) incorporate or integrate Applications
+into a hardware device or product other than a Device, unless Licensee has
+received an advance written permission from The Qt Company to do so. Absent
+such written permission, any and all distribution by the Licensee during the
+Term of a hardware device or product a) which incorporate or integrate any
+part of Licensed Software or Open Source Qt; or b) where the main user
+interface or substantial functionality is provided by software build with
+Licensed Software or Open Source Qt or otherwise depends on the Licensed
+Software or Open Source Qt, shall be considered as a Device distribution under
+this Agreement and dependent on compliance thereof (including but not limited
+to obligation to pay applicable License Fees for such distribution);
+
+(ix) Licensee shall cause all of its Affiliates and Contractors entitled to
+make use of the licenses granted under this Agreement, to be contractually
+bound to comply with the relevant terms of this Agreement and not to use the
+Licensed Software beyond the terms hereof and for any purposes other than
+operating within the scope of their services for Licensee. Licensee shall be
+responsible for any and all actions and omissions of its Affiliates and
+Contractors relating to the Licensed Software and use thereof (including but
+not limited to payment of all applicable License Fees);
+
+(x) Except when and to the extent explicitly provided in this Section 3,
+Licensee shall not transfer, publish, disclose, display or otherwise make
+available the Licensed Software;
+
+; and
+
+(xi) Licensee shall not attempt or enlist a third party to conduct or attempt
+to conduct any of the above.
+
+Above terms shall not be applicable if and to the extent they conflict with any
+mandatory provisions of any applicable laws.
+
+Any use of Licensed Software beyond the provisions of this Agreement is
+strictly prohibited and requires an additional license from The Qt Company.
+
+4. THIRD PARTY SOFTWARE
+
+The Licensed Software may provide links to third party libraries or code
+(collectively "Third Party Software") to implement various functions. Third
+Party Software does not comprise part of the Licensed Software. In some cases,
+access to Third Party Software may be included in the Licensed Software. Such
+Third Party Software will be listed in the ".../src/3rdparty" source tree
+delivered with the Licensed Software or documented in the Licensed Software, as
+such may be amended from time to time. Licensee acknowledges that use or
+distribution of Third Party Software is in all respects subject to applicable
+license terms of applicable third party right holders.
+
+5. PRE-RELEASE CODE
+
+The Licensed Software may contain pre-release code and functionality marked or
+otherwise stated as "Technology Preview", "Alpha", "Beta" or similar
+designation. Such pre-release code may be present in order to provide
+experimental support for new platforms or preliminary versions of one or more
+new functionalities. The pre-release code may not be at the level of
+performance and compatibility of a final, generally available, product
+offering of the Licensed Software. The pre-release parts of the Licensed
+Software may not operate correctly, may contain errors and may be substantially
+modified by The Qt Company prior to the first commercial product release, if
+any. The Qt Company is under no obligation to make pre-release code
+commercially available, or provide any Support or Updates relating thereto. The
+Qt Company assumes no liability whatsoever regarding any pre-release code, but
+any use thereof is exclusively at Licensee's own risk and expense.
+
+6. LIMITED WARRANTY AND WARRANTY DISCLAIMER
+
+The Qt Company hereby represents and warrants that it has the power and
+authority to grant the rights and licenses granted to Licensee under this
+Agreement.
+
+Except as set forth above, the Licensed Software is licensed to Licensee
+"as is" and Licensee's exclusive remedy and The Qt Company's entire liability
+for errors in the Licensed Software shall be limited, at The Qt Company's
+option, to correction of the error, replacement of the Licensed Software or
+return of the applicable fees paid for the defective Licensed Software for the
+time period during which the License is not able to utilize the Licensed
+Software under the terms of this Agreement.
+
+TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE QT COMPANY ON BEHALF OF
+ITSELF AND ITS LICENSORS, SUPPLIERS AND AFFILIATES, DISCLAIMS ALL OTHER
+WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-
+INFRINGEMENT WITH REGARD TO THE LICENSED SOFTWARE. THE QT COMPANY DOES NOT
+WARRANT THAT THE LICENSED SOFTWARE WILL SATISFY LICENSEE'S REQUIREMENTS OR THAT
+IT WILL OPERATE WITHOUT DEFECT OR ERROR OR THAT THE OPERATION THEREOF WILL BE
+UNINTERRUPTED. ALL USE OF AND RELIANCE ON THE LICENSED SOFTWARE IS AT THE SOLE
+RISK OF AND RESPONSIBILITY OF LICENSEE.
+
+7. INDEMNIFICATION AND LIMITATION OF LIABILITY
+
+7.1 Limitation of Liability
+
+EXCEPT FOR (I) CASES OF GROSS NEGLIGENCE OR INTENTIONAL MISCONDUCT,  AND (II)
+BREACH OF CONFIDENTIALITY, AND TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO
+EVENT SHALL EITHER PARTY BE LIABLE TO THE OTHER PARTY FOR ANY LOSS OF PROFIT,
+LOSS OF DATA, LOSS OF BUSINESS OR GOODWILL OR ANY OTHER INDIRECT, SPECIAL,
+CONSEQUENTIAL, INCIDENTAL OR PUNITIVE COST, DAMAGES OR EXPENSE OF ANY KIND,
+HOWSOEVER ARISING UNDER OR IN CONNECTION WITH THIS AGREEMENT. PARTIES
+SPECIFICALLY AGREE THAT LICENSEE'S OBLIGATION TO PAY LICENSE AND OTHER FEES
+CORRESPONDING TO ACTUAL USAGE OF LICENSED SOFTWARE HEREUNDER SHALL BE
+CONSIDERED AS A DIRECT DAMAGE.
+
+EXCEPT FOR (I) CASES OF GROSS NEGLIGENCE OR INTENTIONAL MISCONDUCT,  AND (II)
+BREACH OF CONFIDENTIALITY, AND TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN
+NO EVENT SHALL EITHER PARTY'S TOTAL AGGREGATE LIABILITY UNDER THIS AGREEMENT
+EXCEED THE AGGREGATE LICENSE FEES PAID OR PAYABLE TO THE QT COMPANY FROM
+LICENSEE DURING THE PERIOD OF TWELVE (12) MONTHS IMMEDIATELY PRECEDING THE
+EVENT RESULTING IN SUCH LIABILITY.
+
+THE PROVISIONS OF THIS SECTION 7 ALLOCATE THE RISKS UNDER THIS AGREEMENT
+BETWEEN THE QT COMPANY AND LICENSEE AND THE PARTIES HAVE RELIED UPON THE
+LIMITATIONS SET FORTH HEREIN IN DETERMINING WHETHER TO ENTER INTO THIS AGREEMENT.
+
+7.2 Licensee's Indemnification
+
+Licensee shall indemnify and hold harmless The Qt Company from and against any
+claim, injury, judgment, settlement, loss or expense, including attorneys' fees
+related to: (a) Licensee's misrepresentation in connection with The Qt Company
+or the Licensed Software or breach of this Agreement, (b) the Application or
+Device (except where such cause of liability is solely attributable to the
+Licensed Software).
+
+8. SUPPORT, UPDATES AND ONLINE SERVICES
+
+Upon due payment of the agreed License Fees the Licensee will be eligible to
+receive Support and Updates and to use the Online Services during the License
+Term, provided, however, that in the event the License Term is longer than 36
+months, Support is provided only for the first 12 months, unless the Parties
+specifically otherwise agree.
+
+Unless otherwise decided by The Company at its free and absolute discretion,
+Upgrades will not be included in the Support but may be available subject to
+additional fees.
+
+From time to time The Qt Company may change the Support terms, provided that
+during the respective ongoing License Term the level of Support provided by The
+Qt Company may not be reduced without the consent of the Licensee.
+
+Unless otherwise agreed, The Qt Company shall not be responsible for providing
+any service or support to Customers.
+
+9. CONFIDENTIALITY
+
+Each Party acknowledges that during the Term of this Agreement each Party may
+receive information about the other Party's business, business methods,
+business plans, customers, business relations, technology, and other
+information, including the terms of this Agreement, that is confidential and
+of great value to the other Party, and the value of which would be
+significantly reduced if disclosed to third parties ("Confidential
+Information"). Accordingly, when a Party (the "Receiving Party") receives
+Confidential Information from the other Party (the "Disclosing Party"), the
+Receiving Party shall only disclose such information to employees and
+Contractors on a need to know basis, and shall cause its employees and
+employees of its Affiliates to: (i) maintain any and all Confidential
+Information in confidence; (ii) not disclose the Confidential Information to a
+third party without the Disclosing Party's prior written approval; and (iii)
+not, directly or indirectly, use the Confidential Information for any purpose
+other than for exercising its rights and fulfilling its responsibilities
+pursuant to this Agreement. Each Party shall take reasonable measures to
+protect the Confidential Information of the other Party, which measures shall
+not be less than the measures taken by such Party to protect its own
+confidential and proprietary information.
+
+Obligation of confidentiality shall not apply to information that (i) is or
+becomes generally known to the public through no act or omission of the
+Receiving Party; (ii) was in the Receiving Party's lawful possession prior to
+the disclosure hereunder and was not subject to limitations on disclosure or
+use; (iii) is developed independently by employees or Contractors of the
+Receiving Party or other persons working for the Receiving Party who have not
+had access to the Confidential Information of the Disclosing Party, as proven
+by the written records of the Receiving Party; (iv) is lawfully disclosed to
+the Receiving Party without restrictions, by a third party not under an
+obligation of confidentiality; or (v) the Receiving Party is legally compelled
+to disclose, in which case the Receiving Party shall notify the Disclosing
+Party of such compelled disclosure and assert the privileged and confidential
+nature of the information and cooperate fully with the Disclosing Party to
+limit the scope of disclosure and the dissemination of disclosed Confidential
+Information to the minimum extent necessary.
+
+The obligations under this Section 9 shall continue to remain in force for a
+period of five (5) years after the last disclosure, and, with respect to trade
+secrets, for so long as such trade secrets are protected under applicable trade
+secret laws.
+
+10. FEES, DELIVERY AND PAYMENT
+
+10.1 License Fees
+
+License Fees are described in The Qt Company's standard price list, quote or
+Purchase Order confirmation or in an appendix hereto, as the case may be.
+
+The License Fees shall not be refunded or claimed as a credit in any event or
+for any reason whatsoever.
+
+10.2 Ordering Licenses
+
+Licensee may purchase Development Licenses and Distribution Licenses pursuant
+to agreed pricing terms or, if no specific pricing terms have been agreed upon,
+at The Qt Company's standard pricing terms applicable at the time of purchase.
+
+Licensee shall submit all purchase orders for Development Licenses and
+Distribution Licenses to The Qt Company by email or any other method acceptable
+to The Qt Company (each such order is referred to herein as a "Purchase Order")
+for confirmation, whereupon the Purchase Order shall become binding between the
+Parties.
+
+10.3 Distribution License Packs
+
+Unless otherwise agreed, Distribution Licenses shall be purchased by way of
+Distribution License Packs.
+
+Upon due payment of the ordered Distribution License Pack(s), the Licensee will
+have an account of Distribution Licenses available for installing, bundling or
+integrating (all jointly "installing") the Redistributables with the Devices or
+for otherwise distributing the Redistributables in accordance with this
+Agreement.
+
+Each time Licensee "installs" or distributes a copy of Redistributables, then
+one Distribution License is used, and Licensee's account of available
+Distribution Licenses is decreased accordingly.
+
+Licensee may "install" copies of the Redistributables so long as Licensee has
+Distribution Licenses remaining on its account.
+
+Redistributables will be deemed to have been "installed" into a Device when one
+of the following circumstances shall have occurred: a) the Redistributables
+have been loaded onto the Device and used outside of the Licensee's premises or
+b) the Device has been fully tested and placed into Licensee's inventory
+(or sold) for the first time (i.e., Licensee will not be required to use
+(or pay for) more than one Distribution License for each individual Device,
+e.g. in a situation where a Device is returned to Licensee's inventory after
+delivery to a distributor or sale to a Customer). In addition, if Licensee
+includes a back-up copy of the Redistributables on a CD-ROM or other storage
+medium along with the product, that backup copy of the Redistributables will
+not be deemed to have been "installed" and will not require an additional
+Distribution License.
+
+10.4 Payment Terms
+
+License Fees and any other charges under this Agreement shall be paid by
+Licensee no later than thirty (30) days from the date of the applicable invoice
+from The Qt Company.
+
+The Qt Company will submit an invoice to Licensee after the date of this
+Agreement and/or after The Qt Company receives a Purchase Order from
+Licensee.
+
+A late payment charge of the lower of (a) one percent per month; or (b) the
+interest rate stipulated by applicable law, shall be charged on any unpaid
+balances that remain past due.
+
+The Qt Company shall have the right to suspend, terminate or withhold grants
+of all rights to the Licensed Software hereunder, including but not limited to
+the Developer License, Distribution License, and Support, should Licensee fail
+to make payment in timely fashion.
+
+10.5 Taxes
+
+All License Fees and other charges payable hereunder are gross amounts but
+exclusive of any value added tax, use tax, sales tax and other taxes, duties or
+tariffs ("Taxes"). Such applicable Taxes shall be paid by Licensee, or, where
+applicable, in lieu of payment of such Taxes, Licensee shall provide an
+exemption certificate to The Qt Company and any applicable authority.
+
+11 RECORD-KEEPING AND REPORTING OBLIGATIONS; AUDIT RIGHTS
+
+11.1 Licensee's Record-keeping
+
+Licensee shall at all times maintain accurate and up-to-date written records of
+Licensee's activities related to the use of Licensed Software and distribution
+of Redistributables. The records shall be adequate to determine Licensee's
+compliance with the provisions of this Agreement and to demonstrate the number
+of Designated Users and Redistributables distributed by Licensee. The records
+shall conform to good accounting practices reasonably acceptable to The Qt
+Company.
+
+Licensee shall, within thirty (30) days from receiving The Qt Company's request
+to that effect, deliver to The Qt Company a report on Licensee's usage of
+Licensed Software, such report to copies of Redistributables distributed by
+Licensee during that calendar quarter, and also detailing the number of
+undistributed copies of Redistributables made by Licensee and remaining in its
+account contain information, in sufficient detail, on (i) amount of users
+working with Licensed Software, (ii) copies of Redistributables distributed by
+Licensee during that calendar quarter, (iii) number of undistributed copies of
+Redistributables and corresponding number of unused Distribution Licenses
+remaining on Licensee's account, and (iv) any other information as The Qt
+Company may reasonably require from time to time.
+
+11.2. The Qt Company's Audit Rights
+
+The Qt Company or an independent auditor acting on behalf of The Qt Company's,
+may, upon at least five (5) business days' prior written notice and at its
+expense, audit Licensee with respect to the use of the Redistributables, but
+not more frequently than once during each 6-month period. Such audit may be
+conducted by mail, electronic means or through an in-person visit to Licensee's
+place of business. Any such in-person audit shall be conducted during regular
+business hours at Licensee's facilities and shall not unreasonably interfere
+with Licensee's business activities. The Qt Company or the independent auditor
+acting on behalf of The Qt Company shall be entitled to inspect Licensee's
+Records. All such Licensee's Records and use thereof shall be subject to an
+obligation of confidentiality under this Agreement.
+
+If an audit reveals that Licensee is using the Licensed Software beyond scope
+of the licenses Licensee has paid for, Licensee agrees to immediately pay The
+Qt Company any amounts owed for such unauthorized use.
+
+In addition, in the event the audit reveals a material violation of the terms
+of this Agreement (underpayment of more than 5% of License Fees shall always be
+deemed a material violation for purposes of this section), then the Licensee
+shall pay The Qt Company's reasonable cost of conducting such audit.
+
+12 TERM AND TERMINATION
+
+12.1 Term
+
+This Agreement shall enter into force upon due acceptance by both Parties and
+remain in force for as long as there is any Development License(s) in force
+("Term"), unless and until terminated pursuant to the terms of this Section 12.
+
+12.2 Termination by The Qt Company
+
+The Qt Company shall have the right to terminate this Agreement upon thirty
+(30) days prior written notice if the Licensee is in material breach of any
+obligation of this Agreement and fails to remedy such breach within such notice
+period.
+
+12.3 Mutual Right to Terminate
+
+Either Party shall have the right to terminate this Agreement immediately upon
+written notice in the event that the other Party becomes insolvent, files for
+any form of bankruptcy, makes any assignment for the benefit of creditors, has
+a receiver, administrative receiver or officer appointed over the whole or a
+substantial part of its assets, ceases to conduct business, or an act
+equivalent to any of the above occurs under the laws of the jurisdiction of the
+other Party.
+
+12.4 Parties' Rights and Duties upon Termination
+
+Upon expiry or termination of the Agreement Licensee shall cease and shall
+cause all Designated Users (including those of its Affiliates' and
+Contractors') to cease using the Licensed Software and distribution of the
+Redistributables under this Agreement.
+
+Notwithstanding the above, in the event the Agreement expires or is terminated:
+
+(i) as a result of The Qt Company choosing not to renew the Development
+License(s) as set forth in Section 3.1, then all valid licenses possessed by
+the Licensee at such date shall be extended to be valid in perpetuity under the
+terms of this Agreement and Licensee is entitled to purchase additional
+licenses as set forth in Section 10.2; or
+
+(ii) for reason other than by The Qt Company pursuant to item (i) above or
+pursuant to Section 12.2, then the Licensee is entitled, for a period of six
+(6) months after the effective date of termination, to continue distribution of
+Devices under the Distribution Licenses paid but unused at such effective date
+of termination.
+
+Upon any such termination the Licensee shall destroy or return to The Qt
+Company all copies of the Licensed Software and all related materials and will
+certify the same to The Qt Company upon its request, provided however that
+Licensee may retain and exploit such copies of the Licensed Software as it may
+reasonably require in providing continued support to Customers.
+
+Expiry or termination of this Agreement for any reason whatsoever shall not
+relieve Licensee of its obligation to pay any License Fees accrued or payable
+to The Qt Company prior to the effective date of termination, and Licensee
+shall immediately pay to The Qt Company all such fees upon the effective date
+of termination.  Termination of this Agreement shall not affect any rights of
+Customers to continue use of Applications and Devices (and therein incorporated
+Redistributables).
+
+12.5 Extension in case of bankruptcy
+
+In the event The Qt Company is declared bankrupt under a final, non-cancellable
+decision by relevant court of law, and this Agreement is not, at the date of
+expiry of the Development License(s) pursuant to Section 3.1, assigned to
+party, who has assumed The Qt Company's position as a legitimate licensor of
+Licensed Software under this Agreement, then all valid licenses possessed by
+the Licensee at such date of expiry, and which the Licensee has not notified
+for expiry, shall be extended to be valid in perpetuity under the terms of
+this Agreement.
+
+13. GOVERNING LAW AND LEGAL VENUE
+
+In the event this Agreement is in the name of The Qt Company Inc., a Delaware
+Corporation, then:
+
+(i) this Agreement shall be construed and interpreted in accordance with the
+laws of the State of California, USA, excluding its choice of law provisions;
+
+(ii) the United Nations Convention on Contracts for the International Sale of
+Goods will not apply to this Agreement; and
+
+(iii) any dispute, claim or controversy arising out of or relating to this
+Agreement or the breach, termination, enforcement, interpretation or validity
+thereof, including the determination of the scope or applicability of this
+Agreement to arbitrate, shall be determined by arbitration in San Francisco,
+USA, before one arbitrator. The arbitration shall be administered by JAMS
+pursuant to JAMS' Streamlined Arbitration Rules and Procedures. Judgment on the
+Award may be entered in any court having jurisdiction. This Section shall not
+preclude parties from seeking provisional remedies in aid of arbitration from a
+court of appropriate jurisdiction.
+
+In the event this Agreement is in the name of The Qt Company Ltd., a Finnish
+Company, then:
+
+(i) this Agreement shall be construed and interpreted in accordance with the
+laws of Finland, excluding its choice of law provisions;
+
+(ii) the United Nations Convention on Contracts for the International Sale of
+Goods will not apply to this Agreement; and
+
+(iii) any disputes, controversy or claim arising out of or relating to this
+Agreement, or the breach, termination or validity thereof shall be shall be
+finally settled by arbitration in accordance with the Arbitration Rules of
+Finland Chamber of Commerce. The arbitration tribunal shall consist of one (1),
+or if either Party so requires, of three (3), arbitrators. The award shall be
+final and binding and enforceable in any court of competent jurisdiction. The
+arbitration shall be held in Helsinki, Finland and the process shall be
+conducted in the English language. This Section shall not preclude parties from
+seeking provisional remedies in aid of arbitration from a court of appropriate
+jurisdiction.
+
+14. GENERAL PROVISIONS
+
+14.1 No Assignment
+
+Except in the case of a merger or sale of substantially all of its corporate
+assets, Licensee shall not be entitled to assign or transfer all or any of its
+rights, benefits and obligations under this Agreement without the prior written
+consent of The Qt Company, which shall not be unreasonably withheld or delayed.
+The Qt Company shall be entitled to freely assign or transfer any of its
+rights, benefits or obligations under this Agreement.
+
+14.2 No Third Party Representations
+
+Licensee shall make no representations or warranties concerning the Licensed
+Software on behalf of The Qt Company. Any representation or warranty Licensee
+makes or purports to make on The Qt Company's behalf shall be void as to The
+Qt Company.
+
+14.3 Surviving Sections
+
+Any terms and conditions that by their nature or otherwise reasonably should
+survive termination of this Agreement shall so be deemed to survive.
+
+14.4 Entire Agreement
+
+This Agreement, the exhibits hereto, the License Certificate and any applicable
+Purchase Order constitute the complete agreement between the Parties and
+supersedes all prior or contemporaneous discussions, representations, and
+proposals, written or oral, with respect to the subject matters discussed
+herein.
+
+In the event of any conflict or inconsistency between this Agreement and any
+Purchase Order, the terms of this Agreement will prevail over the terms of the
+Purchase Order with respect to such conflict or inconsistency.
+
+Parties specifically acknowledge and agree that this Agreement prevails over
+any click-to-accept or similar agreements the Designated Users may need to
+accept online upon download of the Licensed Software, as may be required by
+The Qt Company's applicable processes relating to Licensed Software.
+
+14.5 Modifications
+
+No modification of this Agreement shall be effective unless contained in a
+writing executed by an authorized representative of each Party. No term or
+condition contained in Licensee's Purchase Order shall apply unless expressly
+accepted by The Qt Company in writing.
+
+14.6 Force Majeure
+
+Except for the payment obligations hereunder, neither Party shall be liable to
+the other for any delay or non-performance of its obligations hereunder in the
+event and to the extent that such delay or non-performance is due to an event
+of act of God, terrorist attack or other similar unforeseeable catastrophic
+event that prevents either Party for fulfilling its obligations under this
+Agreement and which such Party cannot avoid or circumvent ("Force Majeure
+Event").  If the Force Majeure Event results in a delay or non-performance of a
+Party for a period of three (3) months or longer, then either Party shall have
+the right to terminate this Agreement with immediate effect without any
+liability (except for the obligations of payment arising prior to the event of
+Force Majeure) towards the other Party.
+
+14.7 Notices
+
+Any notice given by one Party to the other shall be deemed properly given and
+deemed received if specifically acknowledged by the receiving Party in writing
+or when successfully delivered to the recipient by hand, fax, or special
+courier during normal business hours on a business day to the addresses
+specified for each Party on the signature page. Each communication and document
+made or delivered by one Party to the other Party pursuant to this Agreement
+shall be in the English language.
+
+14.8 Export Control
+
+Licensee acknowledges that the Redistributables may be subject to export
+control restrictions under the applicable laws of respective countries.
+Licensee shall fully comply with all applicable export license restrictions
+and requirements as well as with all laws and regulations relating to the
+Redistributables and exercise of licenses hereunder and shall procure all
+necessary governmental authorizations, including without limitation, all
+necessary licenses, approvals, permissions or consents, where necessary for the
+re-exportation of the Redistributables, Applications and/or Devices.
+
+14.9 No Implied License
+
+There are no implied licenses or other implied rights granted under this
+Agreement, and all rights, save for those expressly granted hereunder, shall
+remain with The Qt Company and its licensors. In addition, no licenses or
+immunities are granted to the combination of the Licensed Software with any
+other software or hardware not delivered by The Qt Company under this Agreement.
+
+14.10 Attorney Fees
+
+The prevailing Party in any action to enforce this Agreement shall be entitled
+to recover its attorney's fees and costs in connection with such action.
+
+14.11 Severability
+
+If any provision of this Agreement shall be adjudged by any court of competent
+jurisdiction to be unenforceable or invalid, that provision shall be limited or
+eliminated to the minimum extent necessary so that this Agreement shall
+otherwise remain in full force and effect and enforceable.
+
+
+IN WITNESS WHEREOF, the Parties hereto, intending to be legally bound hereby,
+have caused this Agreement to be executed by Licensee's authorized
+representative installing the Licensed Software and accepting the terms
+hereof in connection therewith.
+
+
+Appendix 1
+
+1. Parts of the Licensed Software that are permitted for distribution in
+object code form only ("Redistributables") under this Agreement:
+
+- The Licensed Software's Qt Essentials and Qt Add-on libraries
+- The Licensed Software's configuration tool ("qtconfig")
+- The Licensed Software's help tool ("Qt Assistant")
+- The Licensed Software's internationalization tools ("Qt Linguist", "lupdate",
+  "lrelease")
+- The Licensed Software's QML ("Qt Quick") launcher tool ("qmlscene" or
+  "qmlviewer")
+- The Licensed Software's installer framework
+
+2. Parts of the Licensed Software that are not permitted for distribution
+include, but are not limited to:
+
+- The Licensed Software's source code and header files
+- The Licensed Software's documentation
+- The Licensed Software's documentation generation tool ("qdoc")
+- The Licensed Software's tool for writing makefiles ("qmake")
+- The Licensed Software's Meta Object Compiler ("moc")
+- The Licensed Software's User Interface Compiler ("uic")
+- The Licensed Software's Resource Compiler ("rcc")
+- The Licensed Software's parts of the IDE tool ("Qt Creator")
+- The Licensed Software's parts of the Design tools ("Qt 3D Studio" or
+  "Qt Quick Designer")
+- The Licensed Software's Emulator

README

@@ -21,12 +21,10 @@ HOW TO BUILD QT5
 
     Opensource users:
 
-        <source_package> = qt-everywhere-opensource-src-<version>
         <license>        = -opensource
 
     Commercial users:
 
-        <source_package> = qt-everywhere-enterprise-src-<version>
         <license>        = -commercial
 
    Linux, Mac:

_clang-format

@@ -0,0 +1,80 @@
+# Copyright (C) 2016 Olivier Goffart <ogoffart@woboq.com>
+#
+# You may use this file under the terms of the 3-clause BSD license.
+# See the file LICENSE from this package for details.
+
+# This is the clang-format configuration style to be used by Qt,
+# based on the rules from https://wiki.qt.io/Qt_Coding_Style and
+# https://wiki.qt.io/Coding_Conventions
+
+---
+# Webkit style was loosely based on the Qt style
+BasedOnStyle: WebKit
+
+Standard: Cpp11
+
+# Leave the line breaks up to the user.
+# Note that this may be changed at some point in the future.
+ColumnLimit: 0
+# How much weight do extra characters after the line length limit have.
+# PenaltyExcessCharacter: 4
+
+# Disable reflow of qdoc comments: indentation rules are different.
+# Translation comments are also excluded.
+CommentPragmas: "^!|^:"
+
+# We want a space between the type and the star for pointer types.
+PointerBindsToType: false
+
+# We use template< without space.
+SpaceAfterTemplateKeyword: false
+
+# We want to break before the operators, but not before a '='.
+BreakBeforeBinaryOperators: NonAssignment
+
+# Braces are usually attached, but not after functions or class declarations.
+BreakBeforeBraces: Custom
+BraceWrapping:
+    AfterClass: true
+    AfterControlStatement: false
+    AfterEnum: false
+    AfterFunction: true
+    AfterNamespace: false
+    AfterObjCDeclaration: false
+    AfterStruct: false
+    AfterUnion: false
+    BeforeCatch: false
+    BeforeElse: false
+    IndentBraces: false
+
+# When constructor initializers do not fit on one line, put them each on a new line.
+ConstructorInitializerAllOnOneLineOrOnePerLine: true
+# Indent initializers by 8 spaces
+ConstructorInitializerIndentWidth: 8
+
+# Indent width for line continuations.
+ContinuationIndentWidth: 8
+
+# No indentation for namespaces.
+NamespaceIndentation: None
+
+# Horizontally align arguments after an open bracket.
+# The coding style does not specify the following, but this is what gives
+# results closest to the existing code.
+AlignAfterOpenBracket: true
+AlwaysBreakTemplateDeclarations: true
+
+# Ideally we should also allow less short function in a single line, but
+# clang-format does not handle that.
+AllowShortFunctionsOnASingleLine: Inline
+
+# The coding style specifies some include order categories, but also tells to
+# separate categories with an empty line. It does not specify the order within
+# the categories. Since the SortInclude feature of clang-format does not
+# re-order includes separated by empty lines, the feature is not used.
+SortIncludes: false
+
+# macros for which the opening brace stays attached.
+ForEachMacros:   [ foreach, Q_FOREACH, BOOST_FOREACH, forever, Q_FOREVER, QBENCHMARK, QBENCHMARK_ONCE ]
+
+

coin/platform_configs/default.txt

@@ -1,21 +1,21 @@
 Template                            Target OS           Target arch Compiler    Features
 ----------------------------------- ------------------- ----------- ----------- -------------------------------------------------------------------------------------
-qtci-windows-8.1-x86_64                                             MSVC2013    DeveloperBuild Release DisableTests
 qtci-windows-10-x86_64-10                                           MSVC2015    DeveloperBuild Release QtNamespace QtLibInfix BuildExamples
 qtci-windows-7-x86-3                                                Mingw53     DeveloperBuild Release OpenGLDynamic
 qtci-windows-10-x86_64-10                               x86         MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic
 qtci-windows-10-x86_64-10                                           MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic
 qtci-windows-10-x86_64-10           WinRT_10            x86         MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
 qtci-windows-10-x86_64-10           WinRT_10            armv7       MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
+qtci-windows-10-x86_64-10                                           MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic
 qtci-linux-Ubuntu-16.04-x86_64-2                                    GCC         NoWidgets ForceDebugInfo
 qtci-linux-Ubuntu-16.04-x86_64-2                                    GCC         DeveloperBuild OutOfSourceBuild QtLibInfix QtNamespace BuildExamples Documentation
 qtci-linux-openSUSE-42.3-x86_64                                     GCC         DeveloperBuild NoPch
 qtci-linux-openSUSE-42.3-x86_64                                     ICC_18      DeveloperBuild NoPch DisableTests SystemSQLite
 qtci-linux-RHEL-6.6-x86_64                                          GCC         Release ForceDebugInfo
-qtci-linux-RHEL-7.4-x86_64                                          GCC         Packaging Release NoUseGoldLinker
+qtci-linux-RHEL-7.4-x86_64                                          GCC         Packaging Release NoUseGoldLinker ForceDebugInfo SeparateDebugInfo
 qtci-macos-10.12-x86_64-8                                           Clang       Packaging DebugAndRelease Release
 qtci-osx-10.11-x86_64-3                                             Clang       DeveloperBuild Release QtNamespace NoPch
-qtci-osx-10.10-x86_64                                               Clang       Release NoFramework DisableTests
+qtci-osx-10.11-x86_64-3                                             Clang       Release NoFramework DisableTests
 qtci-macos-10.12-x86_64-8           IOS_ANY             multi       Clang       Release DisableTests Static
 qtci-macos-10.12-x86_64-8           TvOS_ANY            multi       Clang       Release DisableTests
 qtci-macos-10.12-x86_64-8           WatchOS_ANY         multi       Clang       Release DisableTests
@@ -23,5 +23,5 @@ qtci-linux-RHEL-7.4-x86_64          Android_ANY         armv7       GCC
 qtci-linux-Ubuntu-16.04-x86_64-2    QEMU                armv7       GCC         Release
 qtci-linux-Ubuntu-16.04-x86_64-2    QEMU                arm64       GCC         Release
 qtci-linux-Ubuntu-16.04-x86_64-2                                    GCC         TestOnly LicenseCheck
-qtci-linux-RHEL-6.6-x86_64          QNX_660             armv7       GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
 qtci-linux-RHEL-7.4-x86_64          INTEGRITY_11_04     armv7       GCC         Release DisableTests OpenGLES2 NoUseGoldLinker
+qtci-linux-RHEL-7.4-x86_64          QNX_700             armv7       GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker

coin/platform_configs/qt3d-runtime.txt

@@ -0,0 +1,19 @@
+Template                    Target OS           Target arch Compiler    Features
+--------------------------- ------------------- ----------- ----------- -------------------------------------------------------------------------------------
+qtci-windows-10-x86_64-10   WinRT_10                        MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
+qtci-windows-10-x86_64-10   WinRT_10            x86         MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
+qtci-windows-7-x86-3                                        Mingw53     Packaging DebugAndRelease Release OpenGLDynamic DisableTests
+qtci-windows-10-x86_64-10                                   Mingw73     Packaging DebugAndRelease Release OpenGLDynamic DisableTests
+qtci-windows-10-x86_64-10   WinRT_10            armv7       MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
+qtci-windows-10-x86_64-10   WinRT_10                        MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
+qtci-linux-RHEL-7.4-x86_64  Android_ANY         x86         GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
+qtci-windows-7-x86-3        Android_ANY         armv7       Mingw53     Packaging Release DisableTests OpenGLES2
+qtci-windows-7-x86-3        Android_ANY         x86         Mingw53     Packaging Release DisableTests OpenGLES2
+qtci-macos-10.12-x86_64-8   Android_ANY         armv7       GCC         Packaging Release DisableTests OpenGLES2
+qtci-macos-10.12-x86_64-8   Android_ANY         x86         GCC         Packaging Release DisableTests OpenGLES2
+qtci-macos-10.12-x86_64-8   IOS_ANY             multi       Clang       Packaging DebugAndRelease DisableTests Static
+qtci-windows-10-x86_64-10   QNX_700             armv7       Mingw73     Packaging Release DisableTests OpenGLES2
+qtci-windows-10-x86_64-10   QNX_700             armv8       Mingw73     Packaging Release DisableTests OpenGLES2
+qtci-windows-10-x86_64-10   QNX_700             x86_64      Mingw73     Packaging Release DisableTests OpenGLES2
+qtci-linux-RHEL-7.4-x86_64  QNX_700             armv8       GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
+qtci-linux-RHEL-7.4-x86_64  QNX_700             x86_64      GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker

coin/platform_configs/qt5.txt

@@ -1,12 +1,10 @@
 Template                    Target OS           Target arch Compiler    Features
 --------------------------- ------------------- ----------- ----------- -------------------------------------------------------------------------------------
-qtci-windows-8.1-x86_64                         x86         MSVC2013    DebugAndRelease Release ForceDebugInfo OpenGLDynamic DisableTests
-qtci-windows-8.1-x86_64                                     MSVC2013    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic DisableTests
 qtci-windows-10-x86_64-10   WinRT_10                        MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
-qtci-windows-10-x86-6                                       MSVC2017    DebugAndRelease Release ForceDebugInfo OpenGLDynamic
-qtci-windows-10-x86_64-10                                   MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic
+qtci-windows-10-x86_64-10                       x86         MSVC2017    DebugAndRelease Release ForceDebugInfo OpenGLDynamic
 qtci-windows-10-x86_64-10   WinRT_10            x86         MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
 qtci-windows-7-x86-3                                        Mingw53     Packaging DebugAndRelease Release OpenGLDynamic DisableTests
+qtci-windows-10-x86_64-10                                   Mingw73     Packaging DebugAndRelease Release OpenGLDynamic DisableTests
 qtci-windows-10-x86_64-10   WinRT_10            armv7       MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
 qtci-windows-10-x86_64-10   WinRT_10                        MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
 qtci-linux-RHEL-7.4-x86_64  Android_ANY         x86         GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
@@ -14,13 +12,12 @@ qtci-windows-7-x86-3        Android_ANY         armv7       Mingw53     Packagin
 qtci-windows-7-x86-3        Android_ANY         x86         Mingw53     Packaging Release DisableTests OpenGLES2
 qtci-macos-10.12-x86_64-8   Android_ANY         armv7       GCC         Packaging Release DisableTests OpenGLES2
 qtci-macos-10.12-x86_64-8   Android_ANY         x86         GCC         Packaging Release DisableTests OpenGLES2
-qtci-linux-RHEL-6.6-x86_64  QNX_660             x86         GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
+qtci-macos-10.12-x86_64-8   QNX_700             x86         GCC         Release DisableTests OpenGLES2 NoUseGoldLinker
 qtci-macos-10.12-x86_64-8   IOS_ANY             multi       Clang       Packaging DebugAndRelease DisableTests Static
 qtci-macos-10.12-x86_64-8   TvOS_ANY            multi       Clang       DebugAndRelease DisableTests
 qtci-macos-10.12-x86_64-8   WatchOS_ANY         multi       Clang       DebugAndRelease DisableTests
-qtci-windows-10-x86_64-10   QNX_700             armv7       Mingw53     Release DisableTests OpenGLES2
-qtci-windows-10-x86_64-10   QNX_700             x86         Mingw53     Release DisableTests OpenGLES2
-qtci-windows-10-x86_64-10   QNX_660             armv7       Mingw53     Packaging Release DisableTests OpenGLES2
-qtci-windows-10-x86_64-10   QNX_660             x86         Mingw53     Packaging Release DisableTests OpenGLES2
-qtci-linux-RHEL-7.4-x86_64  QNX_700             x86         GCC         Release DisableTests OpenGLES2 NoUseGoldLinker
-qtci-linux-RHEL-7.4-x86_64  QNX_700             armv7       GCC         Release DisableTests OpenGLES2 NoUseGoldLinker
+qtci-windows-10-x86_64-10   QNX_700             armv7       Mingw73     Packaging Release DisableTests OpenGLES2
+qtci-windows-10-x86_64-10   QNX_700             armv8       Mingw73     Packaging Release DisableTests OpenGLES2
+qtci-windows-10-x86_64-10   QNX_700             x86_64      Mingw73     Packaging Release DisableTests OpenGLES2
+qtci-linux-RHEL-7.4-x86_64  QNX_700             armv8       GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
+qtci-linux-RHEL-7.4-x86_64  QNX_700             x86_64      GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker

coin/platform_configs/qtwebkit.txt

@@ -1,5 +1,4 @@
 Template                    Target OS           Target arch Compiler    Features
 --------------------------- ------------------- ----------- ----------- -------------------------------------------------------------------------------------
 qtci-windows-10-x86_64-10                       x86         MSVC2017    DebugAndRelease Release ForceDebugInfo OpenGLDynamic DisableTests
-qtci-windows-10-x86_64-10                                   MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic DisableTests
 qtci-windows-7-x86-3                                        Mingw53     Packaging DebugAndRelease Release OpenGLDynamic DisableTests

coin/platform_configs/tqtc-qt-rta.txt

@@ -0,0 +1,6 @@
+Template                    Target OS           Target arch Compiler    Features
+--------------------------- ------------------- ----------- ----------- -------------------------------------------------------------------------------------
+qtci-windows-7-x86_64-4                                     MSVC2013    Release ForceDebugInfo OpenGLDynamic DisableTests
+qtci-windows-8.1-x86_64                                     MSVC2013    Release ForceDebugInfo OpenGLDynamic DisableTests
+qtci-windows-10-x86-3                                       MSVC2017    Release ForceDebugInfo OpenGLDynamic
+

coin/provisioning/common/linux/android_linux.sh

@@ -37,9 +37,11 @@
 
 # It also runs update for SDK API, latest SDK tools, latest platform-tools and build-tools version
 
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
+# shellcheck source=../unix/DownloadURL.sh
 source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
+# shellcheck source=../unix/check_and_set_proxy.sh
 source "${BASH_SOURCE%/*}/../unix/check_and_set_proxy.sh"
+# shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
 targetFolder="/opt/android"
@@ -62,75 +64,45 @@ toolsSourceFile="$basePath/$toolsFile"
 ndkTargetFile="/tmp/$ndkFile"
 ndkSourceFile="$basePath/$ndkFile"
 
-ExceptionDownload=99
-ExceptionUnzipTools=100
-ExceptionUnzipNdk=101
-ExceptionRmTools=102
-ExceptionRmNdk=103
-ExceptionSdkManager=104
+DownloadURL "$toolsSourceFile" "$toolsSourceFile" "$toolsSha1" "$toolsTargetFile"
+DownloadURL "$ndkSourceFile" "$ndkSourceFile" "$ndkSha1" "$ndkTargetFile"
+echo "Unzipping Android NDK to '$targetFolder'"
+sudo unzip -q "$ndkTargetFile" -d "$targetFolder"
+echo "Unzipping Android Tools to '$sdkTargetFolder'"
+sudo unzip -q "$toolsTargetFile" -d "$sdkTargetFolder"
+rm "$ndkTargetFile"
+rm "$toolsTargetFile"
 
-try
-(
-    (DownloadURL "$toolsSourceFile" "$toolsSourceFile" "$toolsSha1" "$toolsTargetFile") || throw $ExceptionDownload
-    (DownloadURL "$ndkSourceFile" "$ndkSourceFile" "$ndkSha1" "$ndkTargetFile") || throw $ExceptionDownload
-    echo "Unzipping Android NDK to '$targetFolder'"
-    sudo unzip -q "$ndkTargetFile" -d "$targetFolder" || throw $ExceptionUnzipNdk
-    echo "Unzipping Android Tools to '$sdkTargetFolder'"
-    sudo unzip -q "$toolsTargetFile" -d "$sdkTargetFolder" || throw $ExceptionUnzipTools
-    rm "$ndkTargetFile" || throw $ExceptionRmNdk
-    rm "$toolsTargetFile" || throw $ExceptionRmTools
+echo "Changing ownership of Android files."
+if uname -a |grep -q "el6\|el7"; then
+    sudo chown -R qt:wheel "$targetFolder"
+else
+    sudo chown -R qt:users "$targetFolder"
+fi
 
-    echo "Changing ownership of Android files."
-    if uname -a |grep -q "el6\|el7"; then
-        sudo chown -R qt:wheel "$targetFolder"
-    else
-        sudo chown -R qt:users "$targetFolder"
-    fi
+echo "Running SDK manager for platforms;$sdkApiLevel, tools, platform-tools and build-tools;$sdkBuildToolsVersion."
+# shellcheck disable=SC2031
+if [ "$http_proxy" != "" ]; then
+    proxy_host=$(echo "$proxy" | cut -d'/' -f3 | cut -d':' -f1)
+    proxy_port=$(echo "$proxy" | cut -d':' -f3)
+    echo "y" |"$sdkTargetFolder/tools/bin/sdkmanager" --no_https --proxy=http --proxy_host="$proxy_host" --proxy_port="$proxy_port" "platforms;$sdkApiLevel" "tools" "platform-tools" "build-tools;$sdkBuildToolsVersion"
+else
+    echo "y" |"$sdkTargetFolder/tools/bin/sdkmanager" "platforms;$sdkApiLevel" "tools" "platform-tools" "build-tools;$sdkBuildToolsVersion"
+fi
 
-    echo "Running SDK manager for platforms;$sdkApiLevel, tools, platform-tools and build-tools;$sdkBuildToolsVersion."
-    if [ "$proxy" != "" ]; then
-        proxy_host=$(echo $proxy | cut -d'/' -f3 | cut -d':' -f1)
-        proxy_port=$(echo $proxy | cut -d':' -f3)
-        echo "y" |"$sdkTargetFolder/tools/bin/sdkmanager" --no_https --proxy=http --proxy_host=$proxy_host --proxy_port=$proxy_port "platforms;$sdkApiLevel" "tools" "platform-tools" "build-tools;$sdkBuildToolsVersion" || throw $ExceptionSdkManager
-    else
-        echo "y" |"$sdkTargetFolder/tools/bin/sdkmanager" "platforms;$sdkApiLevel" "tools" "platform-tools" "build-tools;$sdkBuildToolsVersion" || throw $ExceptionSdkManager
-    fi
+SetEnvVar "ANDROID_SDK_HOME" "$sdkTargetFolder"
+SetEnvVar "ANDROID_NDK_HOME" "$targetFolder/android-ndk-$ndkVersion"
+SetEnvVar "ANDROID_NDK_HOST" "linux-x86_64"
+SetEnvVar "ANDROID_API_VERSION" "$sdkApiLevel"
 
-    SetEnvVar "ANDROID_SDK_HOME" "$sdkTargetFolder"
-    SetEnvVar "ANDROID_NDK_HOME" "$targetFolder/android-ndk-$ndkVersion"
-    SetEnvVar "ANDROID_NDK_HOST" "linux-x86_64"
-    SetEnvVar "ANDROID_API_VERSION" "$sdkApiLevel"
-
-    echo "Android SDK tools = $toolsVersion" >> ~/versions.txt
-    echo "Android SDK Build Tools = $sdkBuildToolsVersion" >> ~/versions.txt
-    echo "Android SDK API level = $sdkApiLevel" >> ~/versions.txt
-    echo "Android NDK = $ndkVersion" >> ~/versions.txt
-)
-catch || {
-        case $ex_code in
-            $ExceptionDownload)
-                exit 1;
-            ;;
-            $ExceptionUnzipTools)
-                echo "Failed to unzip Android SDK Tools."
-                exit 1;
-            ;;
-            $ExceptionUnzipNdk)
-                echo "Failed to unzip Android NDK."
-                exit 1;
-            ;;
-            $ExceptionRmTools)
-                echo "Failed to remove temporary tools package '$toolsTargetFile'."
-                exit 1;
-            ;;
-            $ExceptionRmNdk)
-                echo "Failed to remove temporary NDK package '$ndkTargetFile'."
-                exit 1;
-            ;;
-            $ExceptionSdkManager)
-                echo "Failed to run sdkmanager."
-                exit 1;
-            ;;
-        esac
-}
+# shellcheck disable=SC2129
+echo "Android SDK tools = $toolsVersion" >> ~/versions.txt
+echo "Android SDK Build Tools = $sdkBuildToolsVersion" >> ~/versions.txt
+echo "Android SDK API level = $sdkApiLevel" >> ~/versions.txt
+echo "Android NDK = $ndkVersion" >> ~/versions.txt
 
+cd "$sdkTargetFolder/tools/bin"
+echo "y" | ./sdkmanager --install "system-images;android-21;google_apis;x86"
+echo "no" | ./avdmanager create avd -n x86emulator -k "system-images;android-21;google_apis;x86" -c 2048M -f
+# Purely informative, show the list of avd devices
+./avdmanager list avd

coin/provisioning/common/linux/cmake_linux.sh

@@ -37,8 +37,9 @@
 
 # CMake is needed for autotests that verify that Qt can be built with CMake
 
-# shellcheck source=InstallFromCompressedFileFromURL.sh
+# shellcheck source=../unix/InstallFromCompressedFileFromURL.sh
 source "${BASH_SOURCE%/*}/../unix/InstallFromCompressedFileFromURL.sh"
+# shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
 version="3.6.2"
@@ -51,3 +52,6 @@ appPrefix="cmake-$version-Linux-x86_64"
 InstallFromCompressedFileFromURL "$PrimaryUrl" "$AltUrl" "$SHA1" "$targetFolder" "$appPrefix"
 
 SetEnvVar "PATH" "$targetFolder/bin:\$PATH"
+
+echo "CMake = $version" >> ~/versions.txt
+

coin/provisioning/common/linux/disable-cracklib.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env bash
+
+sudo chmod -x /etc/cron.daily/cracklib-runtime
+

coin/provisioning/common/linux/disable-mlocate.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+
+sudo chmod -x /etc/cron.daily/mlocate*

coin/provisioning/common/linux/disable-ntp_linux.sh

@@ -40,5 +40,5 @@ echo "Disable Network Time Protocol (NTP)"
 if uname -a |grep -q "Ubuntu"; then
     sudo timedatectl set-ntp false
 else
-    systemctl &>/dev/null && sudo systemctl disable ntpd || sudo /sbin/chkconfig ntpd off
+    (systemctl &>/dev/null && sudo systemctl disable ntpd) || sudo /sbin/chkconfig ntpd off
 fi

coin/provisioning/common/linux/disable_selinux.sh

@@ -1,3 +1,5 @@
+#!/usr/bin/env bash
+
 # We need to disable selinux while we are overwriting some binaries
 # required by it. If this is not done, ICU provisioning will create
 # template that is not booting.

coin/provisioning/common/linux/fbx_linux.sh

@@ -34,7 +34,10 @@
 #############################################################################
 
 # This script installs FBX SDK
+
+# shellcheck source=../unix/DownloadURL.sh
 source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
+# shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
 set -e

coin/provisioning/common/linux/integrity.sh

@@ -35,7 +35,9 @@
 
 # This script installs INTEGRITY
 
+# shellcheck source=../unix/InstallFromCompressedFileFromURL.sh
 source "${BASH_SOURCE%/*}/../unix/InstallFromCompressedFileFromURL.sh"
+# shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
 version="11.4.4"

coin/provisioning/common/linux/open62541.sh

@@ -1,8 +1,8 @@
-#!/usr/bin/env bash
+#!/bin/env bash
 
 #############################################################################
 ##
-## Copyright (C) 2016 The Qt Company Ltd.
+## Copyright (C) 2017 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
 ## This file is part of the test suite of the Qt Toolkit.
@@ -33,32 +33,41 @@
 ##
 #############################################################################
 
-# Patch QNX SDK due to issues in the standard library.
-# The patches are available here:
-# http://www.qnx.com/download/feature.html?programid=27555
-# A copy of the patch must be in the root of the Coin path in
-# provisioning/qnx/patch-660-4367-RS6069_cpp-headers.zip
+set +e
+
+# shellcheck disable=SC1090
+
+# We need to source to be able to use cmake in the shell
+if uname -a |grep -q "Ubuntu"; then
+    source ~/.profile
+else
+    source ~/.bashrc
+fi
 
 set -ex
-sha1="57a11ffe4434ad567b3c36f7b828dbb468a9e565"
 
-function InstallZipPackageFromURL {
-    url=$1
-    expectedSha1=$2
-    targetDirectory=$3
+# shellcheck source=../unix/SetEnvVar.sh
+source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
-    targetFile=`mktemp`
-    wget --tries=5 --waitretry=5 --output-document=$targetFile $url
-    echo "$expectedSha1  $targetFile" | sha1sum --check
+TEMPDIR=$(mktemp --directory) || echo "Failed to create temporary directory"
+# shellcheck disable=SC2064
+trap "sudo rm -fr $TEMPDIR" EXIT
+cd "$TEMPDIR"
 
-    tempDir=`mktemp -d`
-    /usr/bin/unzip -o -d $tempDir $targetFile
-    trap "sudo rm -fr $targetFile $tempDir" EXIT
+sudo pip install --upgrade pip
+sudo pip install six
 
-    sudo cp -rafv $tempDir/patches/660-4367/target/* /opt/qnx660/target/
-}
+git clone https://github.com/open62541/open62541.git open62541
+cd open62541
+git checkout 8845e493d7751fd4eee3917b540e5346646b9cf7
+mkdir build
+cd build
+cmake -DUA_ENABLE_AMALGAMATION=ON -DUA_ENABLE_METHODCALLS=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr/local -DLIB_INSTALL_DIR:PATH=/usr/local/lib/open62541 ..
+make
 
-echo "Patching QNX"
+sudo make install
+sudo /sbin/ldconfig
+
+SetEnvVar "QTOPCUA_OPEN62541_LIB_PATH" "/usr/local/lib/open62541"
+SetEnvVar "QTOPCUA_OPEN62541_INCLUDE_PATH" "/usr/local/include/open62541"
 
-baseBinaryPackageURL="http://ci-files01-hki.intra.qt.io/input/qnx/patch-660-4367-RS6069_cpp-headers.zip"
-InstallZipPackageFromURL $baseBinaryPackageURL $sha1 "/opt/qnx660/target/"

coin/provisioning/common/linux/openssl_for_android_linux.sh

@@ -36,52 +36,32 @@
 # This script install OpenSSL from sources.
 # Requires GCC and Perl to be in PATH.
 
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
+# shellcheck source=../unix/DownloadURL.sh
 source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
+# shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
-version="1.0.2g"
+version="1.0.2o"
 officialUrl="https://www.openssl.org/source/openssl-$version.tar.gz"
 cachedUrl="http://ci-files01-hki.intra.qt.io/input/openssl/openssl-$version.tar.gz"
 targetFile="/tmp/openssl-$version.tar.gz"
 installFolder="/home/qt/"
-sha="36af23887402a5ea4ebef91df8e61654906f58f2"
+sha="a47faaca57b47a0d9d5fb085545857cc92062691"
 # Until every VM doing Linux Android builds have provisioned the env variable
 # OPENSSL_ANDROID_HOME, we can't change the hard coded path that's currently in Coin.
 # QTQAINFRA-1436
 opensslHome="${installFolder}openssl-1.0.2"
 
-ExceptionDownload=99
-ExceptionTar=100
-ExceptionConfig=101
+DownloadURL "$cachedUrl" "$officialUrl" "$sha" "$targetFile"
 
-try
-(
-    (DownloadURL "$cachedUrl" "$officialUrl" "$sha" "$targetFile") || throw $ExceptionDownload
+tar -xzf "$targetFile" -C "$installFolder"
+# This rename should be removed once hard coded path from Coin is fixed. (QTQAINFRA-1436)
+mv "${opensslHome}o" "${opensslHome}"
+pushd "$opensslHome"
 
-    tar -xzf "$targetFile" -C "$installFolder" || throw $ExceptionTar
-    # This rename should be removed once hard coded path from Coin is fixed. (QTQAINFRA-1436)
-    mv "${opensslHome}g" "${opensslHome}"
-    pushd "$opensslHome"
-    perl Configure shared android || throw $ExceptionConfig
+echo "Running configure"
+perl Configure shared android
 
-    SetEnvVar "OPENSSL_ANDROID_HOME" "$opensslHome"
+SetEnvVar "OPENSSL_ANDROID_HOME" "$opensslHome"
 
-    echo "OpenSSL for Android = $version" >> ~/versions.txt
-)
-catch || {
-    case $ex_code in
-        $ExceptionDownload)
-            exit 1;
-        ;;
-        $ExceptionTar)
-            echo "Failed to extract $targetFile"
-            exit 1;
-        ;;
-        $ExceptionConfig)
-            echo "Failed to run 'config'."
-            exit 1;
-        ;;
-    esac
-
-}
+echo "OpenSSL for Android = $version" >> ~/versions.txt

coin/provisioning/common/linux/qnx_660.sh

@@ -0,0 +1,66 @@
+#!/usr/bin/env bash
+
+#############################################################################
+##
+## Copyright (C) 2017 The Qt Company Ltd.
+## Contact: http://www.qt.io/licensing/
+##
+## This file is part of the provisioning scripts of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL21$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and The Qt Company. For licensing terms
+## and conditions see http://www.qt.io/terms-conditions. For further
+## information use the contact form at http://www.qt.io/contact-us.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 or version 3 as published by the Free
+## Software Foundation and appearing in the file LICENSE.LGPLv21 and
+## LICENSE.LGPLv3 included in the packaging of this file. Please review the
+## following information to ensure the GNU Lesser General Public License
+## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## As a special exception, The Qt Company gives you certain additional
+## rights. These rights are described in The Qt Company LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
+
+# This script installs QNX 6.6.0.
+
+set -ex
+
+source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
+
+targetFolder="/opt/"
+sourceFile="http://ci-files01-hki.intra.qt.io/input/qnx/linux/qnx660-patch4687-linux.tar.gz"
+sha1="ffcf91489699c42ce9c1d74941f1829531752bbe"
+folderName="qnx660"
+targetFile="qnx660.tar.gz"
+wget --tries=5 --waitretry=5 --progress=dot:giga --output-document="$targetFile" "$sourceFile"
+echo "$sha1  $targetFile" | sha1sum --check
+if [ ! -d "$targetFolder" ]; then
+    mkdir -p $targetFolder
+fi
+sudo tar -C $targetFolder -xvzf $targetFile
+sudo chown -R qt:users "$targetFolder"/"$folderName"
+
+# Verify that we have last file in tar
+if [ ! -f $targetFolder/$folderName/qnx660-env.sh ]; then
+    echo "Installation failed!"
+    exit -1
+fi
+
+rm -rf $targetFile
+
+# Set env variables
+SetEnvVar "QNX_660" "$targetFolder$folderName"
+
+echo "QNX SDP = 6.6.0" >> ~/versions.txt

coin/provisioning/common/linux/qnx_700.sh

@@ -37,14 +37,15 @@
 
 set -ex
 
+# shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
 targetFolder="/opt/"
-sourceFile="http://ci-files01-hki.intra.qt.io/input/qnx/qnx700.tar.xz"
-sha1="949a87c5f00d0756956cb4b1b3b213ecaeee9113"
+sourceFile="http://ci-files01-hki.intra.qt.io/input/qnx/qnx700-20180801-linux.tar.xz"
+sha1="5d2c8f531823b1f7a2e20968dc698c187c7de94c"
 folderName="qnx700"
 targetFile="qnx700.tar.xz"
-wget --tries=5 --waitretry=5 --output-document="$targetFile" "$sourceFile"
+wget --tries=5 --waitretry=5 --progress=dot:giga --output-document="$targetFile" "$sourceFile"
 echo "$sha1  $targetFile" | sha1sum --check
 if [ ! -d "$targetFolder" ]; then
     mkdir -p $targetFolder
@@ -59,6 +60,7 @@ if [ ! -f $targetFolder/$folderName/qnxsdp-env.sh ]; then
 fi
 
 rm -rf $targetFile
+
 # Set env variables
 SetEnvVar "QNX_700" "$targetFolder$folderName"
 

coin/provisioning/common/linux/remove_update-manager.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+
+sudo apt-get remove update-manager

coin/provisioning/common/macos/InstallAppFromCompressedFileFromURL.sh

@@ -37,21 +37,11 @@
 # uncompresses it and installs it by default
 # to /Applications/. This can be overridden by a target parameter.
 
-# shellcheck source=try_catch.sh
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
-# shellcheck source=DownloadURL.sh
+set -ex
+
+# shellcheck source=../unix/DownloadURL.sh
 source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
 
-ExceptionDownload=99
-ExceptionCreateTmpFile=100
-ExceptionCreateTmpDirectory=101
-ExceptionUncompress=102
-ExceptionMoveApp=103
-ExceptionDeleteTmpFile=104
-ExceptionRemoveTmpDirectory=105
-ExceptionUnknownFormat=106
-
-
 function InstallAppFromCompressedFileFromURL {
     url=$1
     url_alt=$2
@@ -63,74 +53,39 @@ function InstallAppFromCompressedFileFromURL {
         target="/Applications/"
     fi
 
-    try
-    (
-        basefilename=${url##*/}
-        extension=${basefilename##*.}
-        filename=${basefilename%.*}
-        if [ "$extension" == "gz" ] && [ "${filename##*.}" == "tar" ]; then
-            extension="tar.gz"
-        fi
+    basefilename=${url##*/}
+    extension=${basefilename##*.}
+    filename=${basefilename%.*}
+    if [ "$extension" == "gz" ] && [ "${filename##*.}" == "tar" ]; then
+        extension="tar.gz"
+    fi
 
-        echo "Extension for file: $extension"
-        echo "Creating temporary file and directory"
-        targetFile=$(mktemp "$TMPDIR$(uuidgen).$extension") || throw $ExceptionCreateTmpFile
-        # macOS 10.10 mktemp does require prefix
-        if [[ $OSTYPE == "darwin14" ]]; then
-            targetDirectory=$(mktemp -d -t '10.10') || throw $ExceptionCreateTmpDirectory
-        else
-            targetDirectory=$(mktemp -d) || throw $ExceptionCreateTmpDirectory
-        fi
-        (DownloadURL "$url" "$url_alt" "$expectedSha1" "$targetFile") || throw $ExceptionDownload
-        echo "Uncompress $targetFile"
-        case $extension in
-            "tar.gz")
-                tar -xzf "$targetFile" --directory "$targetDirectory" || throw $ExceptionUncompress
-            ;;
-            "zip")
-                unzip "$targetFile" -d "$targetDirectory" || throw $ExceptionUncompress
-            ;;
-            *)
-                throw $ExceptionUnknownFormat
-            ;;
-        esac
-        echo "Moving app to '$target'"
-        sudo mv "$targetDirectory/$appPrefix/"* "$target" || throw $ExceptionMoveApp
-        echo "Removing file '$targetFile'"
-        rm "$targetFile" || throw $ExceptionDeleteTmpFile
-        echo "Removing directory '$targetDirectory'"
-        rm -rf "$targetDirectory" || throw $ExceptionRemoveTmpDirectory
-    )
-
-    catch || {
-        case $ex_code in
-            $ExceptionDownload)
-                exit 1;
-            ;;
-            $ExceptionCreateTmpFile)
-                echo "Failed to create temporary file"
-                exit 1;
-            ;;
-            $ExceptionUncompress)
-                echo "Failed extracting compressed file."
-                exit 1;
-            ;;
-            $ExceptionMoveApp)
-                echo "Failed moving app to '$target'."
-                exit 1;
-            ;;
-            $ExceptionDeleteTmpFile)
-                echo "Failed deleting temporary file."
-                exit 1;
-            ;;
-            $ExceptionRemoveTmpDirectory)
-                echo "Failed deleting temporary file."
-                exit 1;
-            ;;
-            $ExceptionUnknownFormat)
-                echo "Unknown file format."
-                exit 1;
-            ;;
-        esac
-    }
+    echo "Extension for file: $extension"
+    echo "Creating temporary file and directory"
+    targetFile=$(mktemp "$TMPDIR$(uuidgen).$extension")
+    # macOS 10.10 mktemp does require prefix
+    if [[ $OSTYPE == "darwin14" ]]; then
+        targetDirectory=$(mktemp -d -t '10.10')
+    else
+        targetDirectory=$(mktemp -d)
+    fi
+    (DownloadURL "$url" "$url_alt" "$expectedSha1" "$targetFile")
+    echo "Uncompress $targetFile"
+    case $extension in
+        "tar.gz")
+            tar -xzf "$targetFile" --directory "$targetDirectory"
+        ;;
+        "zip")
+            unzip -q "$targetFile" -d "$targetDirectory"
+        ;;
+        *)
+            exit 1
+        ;;
+    esac
+    echo "Moving app to '$target'"
+    sudo mv "$targetDirectory/$appPrefix/"* "$target"
+    echo "Removing file '$targetFile'"
+    rm "$targetFile"
+    echo "Removing directory '$targetDirectory'"
+    rm -rf "$targetDirectory"
 }

coin/provisioning/common/macos/InstallPKGFromURL.sh

@@ -33,16 +33,7 @@
 ##
 #############################################################################
 
-# shellcheck source=try_catch.sh
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
-
-ExceptionCreateTmpFile=100
-ExceptionDownloadPrimaryUrl=101
-ExceptionDownloadAltUrl=102
-ExceptionSHA1=103
-ExceptionInstallerPKG=104
-ExceptionDeleteTmpFile=105
-
+set -ex
 
 function InstallPKGFromURL {
     url=$1
@@ -50,55 +41,19 @@ function InstallPKGFromURL {
     expectedSha1=$3
     targetDirectory=$4
 
-    try
-    (
-        echo "Creating temporary file"
-        targetFile=$(mktemp "$TMPDIR$(uuidgen).pkg") || trow $ExceptionCreateTmpFile
-        try
-        (
-            echo "Downloading PKG from primary URL '$url'"
-            curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$url" || throw $ExceptionDownloadPrimaryUrl
-        )
-        catch || {
-            case $ex_code in
-                $ExceptionDownloadPrimaryUrl)
-                    echo "Failed to download '$url' multiple times"
-                    echo "Downloading PKG from alternative URL '$url_alt'"
-                    curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$url_alt" || throw $ExceptionDownloadAltUrl
-                ;;
-            esac
-        }
-        echo "Checking SHA1 on PKG '$targetFile'"
-        echo "$expectedSha1 *$targetFile" > $targetFile.sha1
-        /usr/bin/shasum --check $targetFile.sha1 || throw $ExceptionSHA1
-        echo "Run installer on PKG"
-        sudo installer -package "$targetFile" -target "$targetDirectory" || throw $ExceptionInstallerPKG
-        echo "Removing file '$targetFile'"
-        rm "$targetFile" || throw $ExceptionDeleteTmpFile
+    echo "Creating temporary file"
+    targetFile=$(mktemp "$TMPDIR$(uuidgen).pkg")
+    echo "Downloading PKG from primary URL '$url'"
+    curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$url" || (
+        echo "Failed to download '$url' multiple times"
+        echo "Downloading PKG from alternative URL '$url_alt'"
+        curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$url_alt"
     )
-
-    catch || {
-        case $ex_code in
-            $ExceptionCreateTmpFile)
-                echo "Failed to create temporary file"
-                exit 1;
-            ;;
-            $ExceptionDownloadAltUrl)
-                echo "Failed downloading PKG from primary and alternative URLs"
-                exit 1;
-            ;;
-            $ExceptionSHA1)
-                echo "Failed to check sha1sum."
-                exit 1;
-            ;;
-            $ExceptionInstallerPKG)
-                echo "Failed running installer on PKG."
-                exit 1;
-            ;;
-            $ExceptionDeleteTmpFile)
-                echo "Failed deleting temporary file."
-                exit 1;
-            ;;
-        esac
-    }
+    echo "Checking SHA1 on PKG '$targetFile'"
+    echo "$expectedSha1 *$targetFile" > "$targetFile.sha1"
+    /usr/bin/shasum --check "$targetFile.sha1"
+    echo "Run installer on PKG"
+    sudo installer -package "$targetFile" -target "$targetDirectory"
+    echo "Removing file '$targetFile'"
+    rm "$targetFile"
 }

coin/provisioning/common/macos/disable_update_downloads.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate AutomaticDownload -boolean FALSE
+

coin/provisioning/common/macos/fbx_macos.sh

@@ -34,8 +34,8 @@
 
 # This script installs FBX SDK
 
-# shellcheck source=./../unix/try_catch.sh
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
+set -ex
+
 # shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
@@ -48,29 +48,18 @@ targetFolder="/tmp"
 targetFile="$targetFolder/$fileName"
 installer="$targetFolder/fbx20161_2_fbxsdk_clang_macos.pkg"
 
-ExceptionExtractPrimaryUrl=100
-
-try
-(
-    echo "Extracting '$cachedUrl'"
-    tar -xzf "$cachedUrl" -C "$targetFolder" || throw $ExceptionExtractPrimaryUrl
+echo "Extracting '$cachedUrl'"
+tar -xzf "$cachedUrl" -C "$targetFolder" || (
+    echo "Failed to uncompress from '$cachedUrl'"
+    echo "Downloading from '$officialUrl'"
+    curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$officialUrl"
+    echo "Checking SHA1 on PKG '$targetFile'"
+    echo "$sha1 *$targetFile" > $targetFile.sha1
+    shasum --check $targetFile.sha1
+    echo "Extracting '$targetFile'"
+    tar -xzf "$targetFile" -C "$targetFolder"
 )
-catch || {
-    case $ex_code in
-        $ExceptionExtractPrimaryUrl)
-        set -e
-        echo "Failed to uncompress from '$cachedUrl'"
-        echo "Downloading from '$officialUrl'"
-        curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$officialUrl" || exit 1;
-        echo "Checking SHA1 on PKG '$targetFile'"
-        echo "$sha1 *$targetFile" > $targetFile.sha1
-        shasum --check $targetFile.sha1
-        echo "Extracting '$targetFile'"
-        tar -xzf "$targetFile" -C "$targetFolder" || exit 1;
-        ;;
-    esac
-}
-set -e
+
 rm -rf "$targetFile"
 echo "Running installer for '$installer'"
 sudo installer -pkg "$installer" -target "/"

coin/provisioning/common/macos/install-commandlinetools.sh

@@ -32,57 +32,32 @@
 ## $QT_END_LICENSE$
 ##
 #############################################################################
+# shellcheck source=../unix/DownloadURL.sh
 source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
 set -ex
 
 # Command line tools is need by homebrew
 
 function InstallCommandLineTools {
-
-    ExceptionMount=101
-    ExceptionInstall=102
-    ExceptionUnmount=103
-
     url=$1
     url_alt=$2
     expectedSha1=$3
     packageName=$4
     version=$5
 
-    try
-    (
-        DownloadURL $url $url_alt $expectedSha1 /tmp/$packageName
-        echo "Mounting $packageName"
-        hdiutil attach /tmp/$packageName || throw $ExceptionMount
-        cd "/Volumes/Command Line Developer Tools"
-        echo "Installing"
-        sudo installer -verbose -pkg *.pkg -target / || throw $ExceptionInstall
-        cd /
-        # Let's fait for 5 second before unmounting. Sometimes resource is busy and cant be unmounted
-        sleep 3
-        echo "Unmounting"
-        umount /Volumes/Command\ Line\ Developer\ Tools/ || throw $ExceptionUnmount
-        echo "Removing $packageName"
-        rm /tmp/$packageName
-
-        echo "Command Line Tools = $version" >> ~/versions.txt
-    )
-    catch || {
-        case $ex_code in
-            $ExceptionMount)
-                echo "Failed to mount"
-                exit 1;
-            ;;
-            $ExceptionInstall)
-                echo "Failed to install"
-                exit 1;
-            ;;
-            $ExceptionUnmount)
-                echo "Failed to unmount"
-                exit 1;
-
-        esac
-    }
+    DownloadURL "$url" "$url_alt" "$expectedSha1" "/tmp/$packageName"
+    echo "Mounting $packageName"
+    hdiutil attach "/tmp/$packageName"
+    cd "/Volumes/Command Line Developer Tools"
+    echo "Installing"
+    sudo installer -verbose -pkg ./*.pkg -target /
+    cd /
+    # Let's fait for 5 second before unmounting. Sometimes resource is busy and cant be unmounted
+    sleep 3
+    echo "Unmounting"
+    umount /Volumes/Command\ Line\ Developer\ Tools/
+    echo "Removing $packageName"
+    rm "/tmp/$packageName"
 
+    echo "Command Line Tools = $version" >> ~/versions.txt
 }

coin/provisioning/common/macos/install_xcode.sh

@@ -44,48 +44,18 @@
 
 
 
-# shellcheck source=../common/unix/try_catch.sh
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
-
-function InstallXCode()
-{
-    ExceptionCPIO=103
-    ExceptionAcceptLicense=105
-    ExceptionDeveloperMode=113
-
+function InstallXCode() {
     sourceFile=$1
     version=$2
 
-    try
-    (
-        echo "Uncompressing and installing '$sourceFile'"
-        xzcat < "$sourceFile" | (cd /Applications/ && sudo cpio -dmi) || throw $ExceptionCPIO
+    echo "Uncompressing and installing '$sourceFile'"
+    xzcat < "$sourceFile" | (cd /Applications/ && sudo cpio -dmi)
 
-        echo "Accept license"
-        sudo xcodebuild -license accept || throw $ExceptionAcceptLicense
+    echo "Accept license"
+    sudo xcodebuild -license accept
 
-        echo "Enabling developer mode, so that using lldb does not require interactive password entry"
-        sudo /usr/sbin/DevToolsSecurity -enable || throw $ExceptionDeveloperMode
-
-        echo "Xcode = $version" >> ~/versions.txt
-    )
-    catch || {
-        case $ex_code in
-            $ExceptionCPIO)
-                echo "Failed to unarchive .cpio."
-                exit 1;
-            ;;
-            $ExceptionDeveloperMode)
-                echo "Failed to enable developer mode."
-                exit 1;
-            ;;
-            $ExceptionAcceptLicense)
-                echo "Failed to accept license."
-                exit 1;
-            ;;
-
-        esac
-    }
+    echo "Enabling developer mode, so that using lldb does not require interactive password entry"
+    sudo /usr/sbin/DevToolsSecurity -enable
 
+    echo "Xcode = $version" >> ~/versions.txt
 }
-

coin/provisioning/common/macos/java.sh

@@ -0,0 +1,63 @@
+#!/usr/bin/env bash
+
+#############################################################################
+##
+## Copyright (C) 2017 The Qt Company Ltd.
+## Contact: http://www.qt.io/licensing/
+##
+## This file is part of the provisioning scripts of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL21$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and The Qt Company. For licensing terms
+## and conditions see http://www.qt.io/terms-conditions. For further
+## information use the contact form at http://www.qt.io/contact-us.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 or version 3 as published by the Free
+## Software Foundation and appearing in the file LICENSE.LGPLv21 and
+## LICENSE.LGPLv3 included in the packaging of this file. Please review the
+## following information to ensure the GNU Lesser General Public License
+## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## As a special exception, The Qt Company gives you certain additional
+## rights. These rights are described in The Qt Company LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
+
+# This script installs JDK
+
+set -ex
+
+echo "Installing Java Development Kit"
+
+targetFile=jdk-8u102-macosx-x64.dmg
+
+url=ci-files01-hki.intra.qt.io:/hdd/www/input/mac
+# url_alt=http://download.oracle.com/otn-pub/java/jdk/8u102-b14/jdk-8u102-macosx-x64.dmg
+
+echo "Mounting $targetFile"
+sudo mount "$url" /Volumes
+
+sudo cp "/Volumes/$targetFile" /tmp
+sudo umount /Volumes
+sudo hdiutil attach "/tmp/$targetFile"
+
+echo Installing JDK
+cd /Volumes/JDK\ 8\ Update\ 102/ && sudo installer -package JDK\ 8\ Update\ 102.pkg -target /
+
+echo "Unmounting $targetFile"
+sudo hdiutil unmount /Volumes/JDK\ 8\ Update\ 102/ -force
+
+echo "Disable auto update"
+sudo defaults write /Library/Preferences/com.oracle.java.Java-Updater JavaAutoUpdateEnabled -bool false
+
+echo "JDK Version = 8 update 102" >> ~/versions.txt

coin/provisioning/common/macos/pip.sh

@@ -1,5 +1,11 @@
 #!/usr/bin/env bash
-# Will install pip utility for python
-curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
-sudo python get-pip.py
-rm get-pip.py
+
+function InstallPip {
+
+    python=$1
+
+    # Will install pip utility for python
+    curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
+    sudo "$python" get-pip.py
+    rm get-pip.py
+}

coin/provisioning/common/macos/python2.sh

@@ -0,0 +1,59 @@
+#!/usr/bin/env bash
+
+#############################################################################
+##
+## Copyright (C) 2018 The Qt Company Ltd.
+## Contact: http://www.qt.io/licensing/
+##
+## This file is part of the provisioning scripts of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL21$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and The Qt Company. For licensing terms
+## and conditions see http://www.qt.io/terms-conditions. For further
+## information use the contact form at http://www.qt.io/contact-us.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 or version 3 as published by the Free
+## Software Foundation and appearing in the file LICENSE.LGPLv21 and
+## LICENSE.LGPLv3 included in the packaging of this file. Please review the
+## following information to ensure the GNU Lesser General Public License
+## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## As a special exception, The Qt Company gives you certain additional
+## rights. These rights are described in The Qt Company LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
+
+# This script installs python2
+
+# shellcheck source=./InstallPKGFromURL.sh
+source "${BASH_SOURCE%/*}/InstallPKGFromURL.sh"
+# shellcheck source=../unix/SetEnvVar.sh
+source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
+# shellcheck source=./pip.sh
+source "${BASH_SOURCE%/*}/pip.sh"
+
+PrimaryUrl="http://ci-files01-hki.intra.qt.io/input/mac/python-2.7.14-macosx10.6.pkg"
+AltUrl="https://www.python.org/ftp/python/2.7.14/python-2.7.14-macosx10.6.pkg"
+SHA1="fa2bb77243ad0cb611aa3295204fab403bb0fa09"
+DestDir="/"
+
+InstallPKGFromURL "$PrimaryUrl" "$AltUrl" "$SHA1" "$DestDir"
+
+InstallPip python2.7
+
+/Library/Frameworks/Python.framework/Versions/2.7/bin/pip install virtualenv
+
+SetEnvVar "PATH" "/Library/Frameworks/Python.framework/Versions/2.7/bin/:\$PATH"
+
+echo "python2 = 2.7.14" >> ~/versions.txt
+

coin/provisioning/common/macos/python3.sh

@@ -36,8 +36,12 @@
 
 # This script installs python3
 
+# shellcheck source=./InstallPKGFromURL.sh
 source "${BASH_SOURCE%/*}/InstallPKGFromURL.sh"
+# shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
+# shellcheck source=./pip.sh
+source "${BASH_SOURCE%/*}/pip.sh"
 
 PrimaryUrl="http://ci-files01-hki.intra.qt.io/input/mac/python-3.6.1-macosx10.6.pkg"
 AltUrl="https://www.python.org/ftp/python/3.6.1/python-3.6.1-macosx10.6.pkg"
@@ -46,9 +50,12 @@ DestDir="/"
 
 InstallPKGFromURL "$PrimaryUrl" "$AltUrl" "$SHA1" "$DestDir"
 
+InstallPip python3.6
+
 /Library/Frameworks/Python.framework/Versions/3.6/bin/pip3 install virtualenv
 
 SetEnvVar "PYTHON3_PATH" "/Library/Frameworks/Python.framework/Versions/3.6/bin"
 SetEnvVar "PIP3_PATH" "/Library/Frameworks/Python.framework/Versions/3.6/bin"
 
 echo "python3 = 3.6.1" >> ~/versions.txt
+

coin/provisioning/common/macos/sha1sum-compatibility.sh

@@ -0,0 +1,50 @@
+#!/usr/bin/env bash
+
+#############################################################################
+##
+## Copyright (C) 2018 The Qt Company Ltd.
+## Contact: http://www.qt.io/licensing/
+##
+## This file is part of the provisioning scripts of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL21$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and The Qt Company. For licensing terms
+## and conditions see http://www.qt.io/terms-conditions. For further
+## information use the contact form at http://www.qt.io/contact-us.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 or version 3 as published by the Free
+## Software Foundation and appearing in the file LICENSE.LGPLv21 and
+## LICENSE.LGPLv3 included in the packaging of this file. Please review the
+## following information to ensure the GNU Lesser General Public License
+## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## As a special exception, The Qt Company gives you certain additional
+## rights. These rights are described in The Qt Company LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
+
+# On macOS the sha1 tool is named 'shasum' while on all other unix systems it is called 'sha1sum'.
+# In order to make all unix provioning scripts run on macOS without special case handling
+# a symbolic link is created.
+# The shasum tool is a perl script which does some globbing to determine the perl version. The
+# symbolic link has to point directly to the binary including the perl version.
+# Additionally the CI seems to have multiple parallel perl versions installed which causes
+# multiple shasum tools to be present (shasum5.16, shasum5.18).
+#
+# Currently this is
+#     /usr/local/bin/sha1sum -> /usr/bin/shasum5.18
+
+[ -d /usr/local/bin ] || sudo mkdir -p /usr/local/bin
+# shellcheck disable=SC2012
+SHASUM_TOOLNAME=$(ls -r /usr/bin/shasum?.* | head -n1)
+sudo ln -s "${SHASUM_TOOLNAME}" /usr/local/bin/sha1sum

coin/provisioning/common/shared/http_proxy.txt

@@ -0,0 +1,2 @@
+proxy=http://proxy.intra.qt.io:3128
+

coin/provisioning/common/shared/sw_versions.txt

@@ -1 +0,0 @@
-libclang_version="4.0"

coin/provisioning/common/unix/DownloadURL.sh

@@ -40,51 +40,22 @@
 # If called directly from another script, it will exit the parent script
 # as well, if not called in its own subshell with parentheses.
 
-# shellcheck source=try_catch.sh
-source "${BASH_SOURCE%/*}/try_catch.sh"
-
-ExceptionDownloadPrimaryUrl=100
-ExceptionDownloadAltUrl=101
-ExceptionSHA1=102
-
 function DownloadURL {
     url=$1
     url_alt=$2
     expectedSha1=$3
     targetFile=$4
 
-    try
-    (
-        try
-        (
-            echo "Downloading from primary URL '$url'"
-            curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$url" || throw $ExceptionDownloadPrimaryUrl
-        )
-        catch || {
-            case $ex_code in
-                $ExceptionDownloadPrimaryUrl)
-                    echo "Failed to download '$url' multiple times"
-                    echo "Downloading tar.gz from alternative URL '$url_alt'"
-                    curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$url_alt" || throw $ExceptionDownloadAltUrl
-                ;;
-            esac
-        }
-        echo "Checking SHA1 on PKG '$targetFile'"
-        echo "$expectedSha1 *$targetFile" > $targetFile.sha1
-        shasum --check $targetFile.sha1 || throw $ExceptionSHA1
+    echo "Downloading from primary URL '$url'"
+    curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$url" ||  (
+        echo "Failed to download '$url' multiple times"
+        echo "Downloading from alternative URL '$url_alt'"
+        curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$url_alt"
     )
 
-    catch || {
-        case $ex_code in
-            $ExceptionDownloadAltUrl)
-                echo "Failed downloading PKG from primary and alternative URLs"
-                exit 1;
-            ;;
-            $ExceptionSHA1)
-                echo "Failed checksum on $targetFile."
-                exit 1;
-            ;;
-        esac
-    }
+    echo "Checking SHA1 on PKG '$targetFile'"
+    echo "$expectedSha1 *$targetFile" > "$targetFile.sha1"
+    sha1sum --check "$targetFile.sha1"
+    rm -f "$targetFile.sha1"
 }
 

coin/provisioning/common/unix/InstallFromCompressedFileFromURL.sh

@@ -33,21 +33,11 @@
 ##
 #############################################################################
 
-# shellcheck source=try_catch.sh
-source "${BASH_SOURCE%/*}/try_catch.sh"
+set -ex
+
 # shellcheck source=DownloadURL.sh
 source "${BASH_SOURCE%/*}/DownloadURL.sh"
 
-ExceptionDownload=99
-ExceptionCreateTmpFile=100
-ExceptionCreateTmpDirectory=101
-ExceptionUncompress=102
-ExceptionMoveApp=103
-ExceptionDeleteTmpFile=104
-ExceptionRemoveTmpDirectory=105
-ExceptionUnknownFormat=106
-
-
 function InstallFromCompressedFileFromURL {
     url=$1
     url_alt=$2
@@ -55,70 +45,35 @@ function InstallFromCompressedFileFromURL {
     installDirectory=$4
     appPrefix=$5
 
-    try
-    (
-        basefilename=${url##*/}
-        extension=${basefilename##*.}
-        filename=${basefilename%.*}
-        if [ "$extension" == "gz" ] && [ "${filename##*.}" == "tar" ]; then
-            extension="tar.gz"
-        fi
-        echo "Extension for file: $extension"
-        echo "Creating temporary file and directory"
-        targetFile=$(mktemp "$TMPDIR$(uuidgen)XXXXX.$extension") || throw $ExceptionCreateTmpFile
-        targetDirectory=$(mktemp -d) || throw $ExceptionCreateTmpDirectory
-        (DownloadURL "$url" "$url_alt" "$expectedSha1" "$targetFile") || throw $ExceptionDownload
-        echo "Uncompress $targetFile"
-        case $extension in
-            "tar.gz")
-                tar -xzf "$targetFile" --directory "$targetDirectory" || throw $ExceptionUncompress
-            ;;
-            "zip")
-                unzip "$targetFile" -d "$targetDirectory" || throw $ExceptionUncompress
-            ;;
-            *)
-                throw $ExceptionUnknownFormat
-            ;;
-        esac
-        echo "Moving app to $installDirectory"
-        sudo mkdir -p "$installDirectory"
-        sudo mv "$targetDirectory/$appPrefix/"* "$installDirectory" || throw $ExceptionMoveApp
-        echo "Removing file '$targetFile'"
-        rm "$targetFile" || throw $ExceptionDeleteTmpFile
-        echo "Removing directory '$targetDirectory'"
-        rm -rf "$targetDirectory" || throw $ExceptionRemoveTmpDirectory
-    )
-
-    catch || {
-        case $ex_code in
-            $ExceptionDownload)
-                exit 1;
-            ;;
-            $ExceptionCreateTmpFile)
-                echo "Failed to create temporary file"
-                exit 1;
-            ;;
-            $ExceptionUncompress)
-                echo "Failed extracting compressed file."
-                exit 1;
-            ;;
-            $ExceptionMoveApp)
-                echo "Failed moving app to target location."
-                exit 1;
-            ;;
-            $ExceptionDeleteTmpFile)
-                echo "Failed deleting temporary file."
-                exit 1;
-            ;;
-            $ExceptionRemoveTmpDirectory)
-                echo "Failed deleting temporary file."
-                exit 1;
-            ;;
-            $ExceptionUnknownFormat)
-                echo "Unknown file format."
-                exit 1;
-            ;;
-        esac
-    }
+    basefilename=${url##*/}
+    extension=${basefilename##*.}
+    filename=${basefilename%.*}
+    if [ "$extension" == "gz" ] && [ "${filename##*.}" == "tar" ]; then
+        extension="tar.gz"
+    fi
+    echo "Extension for file: $extension"
+    echo "Creating temporary file and directory"
+    targetFile=$(mktemp "$TMPDIR$(uuidgen)XXXXX.$extension")
+    targetDirectory=$(mktemp -d)
+    DownloadURL "$url" "$url_alt" "$expectedSha1" "$targetFile"
+    echo "Uncompress $targetFile"
+    case $extension in
+        "tar.gz")
+            tar -xzf "$targetFile" --directory "$targetDirectory"
+        ;;
+        "zip")
+            unzip "$targetFile" -d "$targetDirectory"
+        ;;
+        *)
+            exit 1
+        ;;
+    esac
+    echo "Moving app to $installDirectory"
+    sudo mkdir -p "$installDirectory"
+    sudo mv "$targetDirectory/$appPrefix/"* "$installDirectory"
+    echo "Removing file '$targetFile'"
+    rm "$targetFile"
+    echo "Removing directory '$targetDirectory'"
+    rm -rf "$targetDirectory"
 }
 

coin/provisioning/common/unix/check_and_set_proxy.sh

@@ -32,19 +32,9 @@
 ##
 #############################################################################
 
-source "${BASH_SOURCE%/*}/try_catch.sh"
-source "${BASH_SOURCE%/*}/http_proxy.txt"
+set -ex
 
-try
-(
-  wget -q -e "http_proxy=$proxy" --spider proxy.intra.qt.io
-)
-
-if [ $? -eq 0 ]; then
-    echo "Setting http_proxy to $proxy"
-    export http_proxy=$proxy
-
-else
-    echo "Proxy not detected at $proxy"
-fi
+# shellcheck source=../shared/http_proxy.txt
+source "${BASH_SOURCE%/*}/../shared/http_proxy.txt"
 
+(wget -q -e "http_proxy=$proxy" --spider proxy.intra.qt.io && echo "Setting http_proxy to $proxy" && export http_proxy=$proxy) || echo "Proxy not detected at $proxy"

coin/provisioning/common/unix/http_proxy.txt

@@ -1,2 +0,0 @@
-proxy="http://proxy.intra.qt.io:3128"
-

coin/provisioning/common/unix/libclang.sh

@@ -40,36 +40,47 @@
 # In case of Linux, we expect to get the values as args
 set -e
 
+# shellcheck source=./check_and_set_proxy.sh
 source "${BASH_SOURCE%/*}/check_and_set_proxy.sh"
+# shellcheck source=./SetEnvVar.sh
+source "${BASH_SOURCE%/*}/SetEnvVar.sh"
+# shellcheck source=./DownloadURL.sh
+source "${BASH_SOURCE%/*}/DownloadURL.sh"
 
-BASEDIR=$(dirname "$0")
-. $BASEDIR/../shared/sw_versions.txt
-url=$1
-sha1=$2
-version=$3
-if [ $# -eq 0 ]
-  then
-    # The default values are for macOS package
-    echo "Using macOS defaults"
+libclang_version=6.0
+libclang_version_Rhel6=4.0
+
+if uname -a |grep -q Darwin; then
     version=$libclang_version
-    url="https://download.qt.io/development_releases/prebuilt/libclang/libclang-release_${version//\./}-mac.7z"
-    sha1="4781d154b274b2aec99b878c364f0ea80ff00a80"
+    url="https://download.qt.io/development_releases/prebuilt/libclang/qt/libclang-release_${version//\./}-mac.7z"
+    url_cached="http://ci-files01-hki.intra.qt.io/input/libclang/qt/libclang-release_${version//\./}-mac.7z"
+    sha1="0af8ab8c1174faf4b721d079587190fc32ea8364"
+elif uname -a |grep -q "el6"; then
+    version=$libclang_version_Rhel6
+    url="https://download.qt.io/development_releases/prebuilt/libclang/qt/libclang-release_${version//\./}-linux-Rhel6.6-gcc4.9-x86_64.7z"
+    url_cached="http://ci-files01-hki.intra.qt.io/input/libclang/qt/libclang-release_${version//\./}-linux-Rhel6.6-gcc4.9-x86_64.7z"
+    sha1="c7466109628418a6aa3db8b3f5825f847f1c4952"
+else
+    version=$libclang_version
+    url="https://download.qt.io/development_releases/prebuilt/libclang/qt/libclang-release_${version//\./}-linux-Rhel7.2-gcc5.3-x86_64.7z"
+    url_cached="http://ci-files01-hki.intra.qt.io/input/libclang/qt/libclang-release_${version//\./}-linux-Rhel7.2-gcc5.3-x86_64.7z"
+    sha1="ef59b699f4fcce2e45108b3ff04cc7471c1c4abe"
 fi
 
-zip="libclang.7z"
+zip="/tmp/libclang.7z"
 destination="/usr/local/libclang-$version"
 
-curl --fail -L --retry 5 --retry-delay 5 -o "$zip" "$url"
-_shasum=sha1sum
-if [[ "$OSTYPE" == "darwin"* ]]; then
-    echo "DARWIN"
-    _shasum=/usr/bin/shasum
-fi
-echo "$sha1  $zip" | $_shasum --check
+DownloadURL $url_cached $url $sha1 $zip
 7z x $zip -o/tmp/
 rm -rf $zip
 
-sudo mv /tmp/libclang $destination
+sudo mv /tmp/libclang "$destination"
 
 echo "export LLVM_INSTALL_DIR=$destination" >> ~/.bash_profile
 echo "libClang = $version" >> ~/versions.txt
+
+if [ "$version" == "6.0" ]; then
+    # This is a hacked static build of libclang which requires special
+    # handling on the qdoc side.
+    SetEnvVar "QDOC_USE_STATIC_LIBCLANG" "1"
+fi

coin/provisioning/common/unix/mqtt_broker.sh

@@ -39,10 +39,10 @@
 source "${BASH_SOURCE%/*}/InstallFromCompressedFileFromURL.sh"
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
-CommitSHA="c342c09dadc7a664d0a8befad1ca031f5a0b0bc0"
+CommitSHA="5e14a65bbf602fe5d58afdd1394ce76d41ed5c65"
 PrimaryUrl="http://ci-files01-hki.ci.local/input/mqtt_broker/paho.mqtt.testing-$CommitSHA.zip"
 AltUrl="https://github.com/eclipse/paho.mqtt.testing/archive/$CommitSHA.zip"
-SHA1="532fe145096cdd8d679f425cbfd883289150c968"
+SHA1="6afc375c2702eb36a960f38dd4912a3422d679fd"
 targetFolder="/opt/paho_broker"
 appPrefix="paho.mqtt.testing-$CommitSHA"
 

coin/provisioning/common/unix/squishInstall.sh

@@ -33,8 +33,6 @@
 ##
 #############################################################################
 
-source "${BASH_SOURCE%/*}/try_catch.sh"
-
 set -ex
 
 # This script will install squish package for Linux and Mac.
@@ -53,6 +51,9 @@ fi
 squishLicenseUrl="ci-files01-hki.intra.qt.io:/hdd/www/input/squish/coin/"
 squishLicenseFile=".squish-3-license.tar.gz"
 
+testSuite="suite_test_squish"
+testSuiteUrl="ci-files01-hki.intra.qt.io:/hdd/www/input/squish/coin/"
+
 # These checks can be removed when Vanilla OS for all linux and Mac are in
 if [ -d "$squishFolder" ]; then
     echo "Move old squish to /tmp"
@@ -65,18 +66,7 @@ if [ -f "/etc/profile.d/squish_env.sh" ]; then
     export SQUISH_LICENSEKEY_DIR=$HOME
 fi
 
-ExceptionMount=100
-ExceptionCreateFolder=101
-ExceptionUncompress=102
-ExceptionUnknownFormat=103
-ExceptionCopy=104
-ExceptionUmount=105
-ExceptionHdiutilAttach=106
-ExceptionInstallSquish=107
-ExceptionChangeOwnership=108
-
 function MountAndInstall {
-
     url=$1
     targetDirectory=$2
     targetFile=$3
@@ -100,108 +90,68 @@ function MountAndInstall {
         squishLicenseDir="/root"
     fi
 
+    function UnMount {
+        echo "Unmounting $mountFolder"
+        sudo diskutil unmount force "$mountFolder" || sudo umount -f "$mountFolder"
+    }
+
     targetFileMount="$mountFolder"/"$targetFile"
 
-    try
-    (
-        echo "Mounting $url to $mountFolder"
-        sudo mount "$url" $mountFolder || throw $ExceptionMount
-        echo "Create $targetDirectory if needed"
-        if [ !  -d "/opt" ]; then
-            sudo mkdir "/opt" || throw $ExceptionCreateFolder
-        fi
-        if [ !  -d "$targetDirectory" ]; then
-            sudo mkdir "$targetDirectory" || throw $ExceptionCreateFolder
-        fi
-        echo "Uncompress $targetFile"
-        if [[ $targetFile == *.tar.gz ]]; then
-            if [[ $targetFile == .squish-3-license.* ]]; then
-                target="$squishLicenseDir"
-                # Squish license need to be exists also in users home directory, because squish check it before it starts running tests
-                sudo tar -xzf "$targetFileMount" --directory "$HOME" || throw $ExceptionUncompress
-            else
-                target="$targetDirectory"
-            fi
-            sudo tar -xzf "$targetFileMount" --directory "$target" || throw $ExceptionUncompress
-            echo "Unmounting $mountFolder"
-            sudo umount $mountFolder || throw $ExceptionUmount
-        elif [[ $targetFile == *.dmg ]]; then
-            echo "'dmg-file', no need to uncompress"
-            sudo cp $targetFileMount /tmp || throw $ExceptionCopy
-            sudo umount $mountFolder || throw $ExceptionUmount
-            sudo hdiutil attach "/tmp/$targetFile" || throw $ExceptionHdiutilAttach
-            sudo /Volumes/froglogic\ Squish/Install\ Squish.app/Contents/MacOS/Squish unattended=1 targetdir="$targetDirectory/package" qtpath="$targetDirectory" || throw $ExceptionInstallSquish
-            sudo hdiutil unmount /Volumes/froglogic\ Squish/
-        elif [[ $targetFile == *.run ]]; then
-            echo "'run-file', no need to uncompress"
-            sudo cp $targetFileMount $targetDirectory || throw $ExceptionCopy
-            sudo umount $mountFolder || throw $ExceptionUmount
-            sudo $targetDirectory/$targetFile unattended=1 targetdir="$targetDirectory/package" qtpath="$targetDirectory" > /dev/null 2>&1 || throw $ExceptionInstallSquish
-            sudo rm -fr "$targetDirectory/$targetFile"
-            if uname -a |grep -q "Ubuntu"; then
-                sudo mkdir /usr/lib/tcl8.6 || throw $ExceptionCreateFolder
-                sudo cp "$targetDirectory/package/tcl/lib/tcl8.6/init.tcl" /usr/lib/tcl8.6/ || throw $ExceptionCopy
-            fi
+    echo "Mounting $url to $mountFolder"
+    sudo mount "$url" "$mountFolder"
+    echo "Create $targetDirectory if needed"
+    if [ !  -d "/opt" ]; then
+        sudo mkdir "/opt"
+    fi
+    if [ !  -d "$targetDirectory" ]; then
+        sudo mkdir "$targetDirectory"
+    fi
+    echo "Uncompress $targetFile"
+    if [[ $targetFile == *.tar.gz ]]; then
+        if [[ $targetFile == .squish-3-license.* ]]; then
+            target="$squishLicenseDir"
+            # Squish license need to be exists also in users home directory, because squish check it before it starts running tests
+            sudo tar -xzf "$targetFileMount" --directory "$HOME"
         else
-            throw $ExceptionUnknownFormat
+            target="$targetDirectory"
         fi
+        sudo tar -xzf "$targetFileMount" --directory "$target"
+        UnMount
+    elif [[ $targetFile == *.dmg ]]; then
+        echo "'dmg-file', no need to uncompress"
+        sudo cp $targetFileMount /tmp
+        UnMount
+        sudo hdiutil attach "/tmp/$targetFile"
+        sudo /Volumes/froglogic\ Squish/Install\ Squish.app/Contents/MacOS/Squish unattended=1 targetdir="$targetDirectory/package" qtpath="$targetDirectory"
+        mountFolder="/Volumes/froglogic Squish"
+        UnMount
+    elif [[ $targetFile == *.run ]]; then
+        echo "'run-file', no need to uncompress"
+        sudo cp $targetFileMount $targetDirectory
+        UnMount
+        sudo $targetDirectory/$targetFile unattended=1 targetdir="$targetDirectory/package" qtpath="$targetDirectory" > /dev/null 2>&1
+        sudo rm -fr "$targetDirectory/$targetFile"
+        if uname -a |grep -q "Ubuntu"; then
+            sudo mkdir /usr/lib/tcl8.6
+            sudo cp "$targetDirectory/package/tcl/lib/tcl8.6/init.tcl" /usr/lib/tcl8.6/
+        fi
+    else
+        exit 1
+    fi
 
-        echo "Changing ownerships"
-        sudo chown -R qt:$usersGroup "$targetDirectory" || throw $ExceptionChangeOwnership
-        sudo chown qt:$usersGroup "$HOME/.squish-3-license"
-
-    )
-
-    catch || {
-        case $ex_code in
-            $ExceptionMount)
-                echo "Failed to mount $url to $mountFolder."
-                exit 1;
-            ;;
-            $ExceptionCreateFolder)
-                echo "Failed to create folder"
-                exit 1;
-            ;;
-            $ExceptionUncompress)
-                echo "Failed extracting compressed file."
-                exit 1;
-            ;;
-            $ExceptionUnknownFormat)
-                echo "Unknown file format."
-                exit 1;
-            ;;
-            $ExceptionCopy)
-                echo "Failed to copy"
-                exit 1;
-            ;;
-            $ExceptionUmount)
-                echo "Failed to unmount $mountFolder."
-                exit 1;
-            ;;
-            $ExceptionHdiutilAttach)
-                echo "Failed to hdituli attach $mountFolder/$targetFile."
-                exit 1;
-            ;;
-            $ExceptionInstallSquish)
-                echo "Failed to install squish"
-                exit 1;
-            ;;
-            $ExceptionChangeOwnership)
-                echo "Failed to change ownership of $targetDirectory."
-                exit 1;
-            ;;
-        esac
-    }
+    echo "Changing ownerships"
+    sudo chown -R qt:$usersGroup "$targetDirectory"
+    sudo chown qt:$usersGroup "$HOME/.squish-3-license"
 }
 
 echo "Set commands for environment variables in .bashrc"
 
 if uname -a |grep -q "Ubuntu"; then
     echo "export SQUISH_PATH=$squishFolder/package" >> ~/.profile
-    echo "export PATH=\$PATH:$quishFolder/squish-$version/bin" >> ~/.profile
+    echo "export PATH=\$PATH:$squishFolder/squish-$version/bin" >> ~/.profile
 else
     echo "export SQUISH_PATH=$squishFolder/package" >> ~/.bashrc
-    echo "export PATH=\$PATH:$quishFolder/squish-$version/bin" >> ~/.bashrc
+    echo "export PATH=\$PATH:$squishFolder/squish-$version/bin" >> ~/.bashrc
 fi
 
 echo "Installing squish license to home directory.."
@@ -209,3 +159,14 @@ MountAndInstall "$squishLicenseUrl" "$squishFolder" "$squishLicenseFile"
 
 echo "Installing squish $version.."
 MountAndInstall "$squishUrl" "$squishFolder" "$squishFile"
+
+echo "Installing test suite for squish"
+MountAndInstall "$testSuiteUrl" "$squishFolder" "$testSuite.tar.gz"
+
+echo "Verifying Squish Installation"
+if "$squishFolder/package/bin/squishrunner" --testsuite "$squishFolder/$testSuite" | grep "Squish test run successfully" ; then
+    echo "Squish installation tested successfully"
+else
+    echo "Squish test failed! Package wasn't installed correctly."
+    exit 1
+fi

coin/provisioning/common/windows/03-conan.ps1

@@ -2,18 +2,12 @@
 
 $scriptsPath = "C:\Python27\Scripts"
 
-& "$scriptsPath\pip.exe" install --upgrade conan==0.24.0
+Run-Executable "$scriptsPath\pip.exe" "install --upgrade conan==0.24.0"
 
 # Use Qt Project repository by default
-& "$scriptsPath\conan.exe" remote add qtproject https://api.bintray.com/conan/qtproject/conan --insert
+Run-Executable "$scriptsPath\conan.exe" "remote add qtproject https://api.bintray.com/conan/qtproject/conan --insert"
 
-[Environment]::SetEnvironmentVariable("CI_CONAN_BUILDINFO_DIR", "C:\Utils\conanbuildinfos", "Machine")
-
-function Start-Process-Logged
-{
-    Write-Host "Start-Process", $args
-    Start-Process @args
-}
+Set-EnvironmentVariable "CI_CONAN_BUILDINFO_DIR" "C:\Utils\conanbuildinfos"
 
 function Run-Conan-Install
 {
@@ -43,20 +37,24 @@ function Run-Conan-Install
         $outpwd = "C:\Utils\conanbuildinfos\$($BuildinfoDir)\$($_.BaseName)"
         New-Item $outpwd -Type directory -Force
 
-        $process = Start-Process-Logged `
-            "$scriptsPath\conan.exe" `
-            -WorkingDirectory $outpwd `
-            -ArgumentList "install -f $conanfile --no-imports --verify $manifestsDir", `
-                '-s', ('compiler="' + $Compiler + '"'), `
-                "-s os=Windows -s arch=$Arch -s compiler.version=$CompilerVersion $extraArgs" `
-            -NoNewWindow -Wait -Verbose `
-            -PassThru # Return process object
-
-        if ($process.ExitCode -ne 0) {
-            Write-Host "conan exited with code $($process.ExitCode)"
-            Exit(1)
+        for ($i = 1; $i -le 5; $i++) {
+            try {
+                Push-Location $outpwd
+                Run-Executable "$scriptsPath\conan.exe" "install -f $conanfile --no-imports --verify $manifestsDir", `
+                    '-s', ('compiler="' + $Compiler + '"'), `
+                    "-s os=Windows -s arch=$Arch -s compiler.version=$CompilerVersion $extraArgs" `
+                break;
+            } catch {
+                if ($i -eq 5) {
+                    throw "Could not install conan content"
+                }
+            } finally {
+                Pop-Location
+            }
         }
 
         Copy-Item -Path $conanfile -Destination "$outpwd\conanfile.txt"
     }
 }
+
+Write-Output "Conan = 0.24.0" >> ~\versions.txt

coin/provisioning/common/windows/3dstudio_3rdparty.ps1

@@ -1,10 +1,12 @@
 . "$PSScriptRoot\helpers.ps1"
 
-$zip = "c:\users\qt\downloads\Qt3DStudio-3rdparty-win64-CI.zip"
+$zip = Get-DownloadLocation "Qt3DStudio-3rdparty-win64-CI.zip"
 
-Invoke-WebRequest -UseBasicParsing http://ci-files01-hki.intra.qt.io/input/3rdparty/Qt3DStudio-3rdparty-win64-CI.zip -OutFile $zip
+$url = "http://ci-files01-hki.intra.qt.io/input/3rdparty/Qt3DStudio-3rdparty-win64-CI.zip"
+
+Download $url $url $zip
 Verify-Checksum $zip "08D740D2EFB4CBCDE7D012908B89AA48DE5CD4E1"
-Extract-Zip $zip C:\Utils\Qt3DStudio3rdparty
-Remove-Item $zip
+Extract-7Zip $zip C:\Utils\Qt3DStudio3rdparty
+Remove-Item -Path $zip
 
-[Environment]::SetEnvironmentVariable("QT3DSTUDIO_3RDPARTY_DIR", "C:/Utils/Qt3DStudio3rdparty", "Machine")
+Set-EnvironmentVariable "QT3DSTUDIO_3RDPARTY_DIR" "C:/Utils/Qt3DStudio3rdparty"

coin/provisioning/common/windows/allow-remote-desktop-access.ps1

@@ -30,7 +30,8 @@
 ## $QT_END_LICENSE$
 ##
 #############################################################################
+. "$PSScriptRoot\helpers.ps1"
 
 # This script allows the Windows Remote Desktop Access
 
-reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" /v fDenyTSConnections /t REG_DWORD /d 0 /f
+Run-Executable "reg.exe" "add `"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server`" /v fDenyTSConnections /t REG_DWORD /d 0 /f"

coin/provisioning/common/windows/android-openssl.ps1

@@ -39,31 +39,33 @@
 # Msys need to be installed to target machine
 # More info and building instructions can be found from http://doc.qt.io/qt-5/opensslsupport.html
 
-$version = "1.0.2j"
-$zip = "c:\users\qt\downloads\openssl-$version.tar.gz"
-$sha1 = "bdfbdb416942f666865fa48fe13c2d0e588df54f"
+$version = "1.0.2o"
+$zip = Get-DownloadLocation ("openssl-$version.tar.gz")
+$sha1 = "a47faaca57b47a0d9d5fb085545857cc92062691"
 $destination = "C:\Utils\openssl-android-master"
 
 Download https://www.openssl.org/source/openssl-$version.tar.gz \\ci-files01-hki.intra.qt.io\provisioning\openssl\openssl-$version.tar.gz $zip
 Verify-Checksum $zip $sha1
 
-C:\Utils\sevenzip\7z.exe x $zip -oC:\Utils
-C:\Utils\sevenzip\7z.exe x C:\Utils\openssl-$version.tar -oC:\Utils
+Extract-7Zip $zip C:\Utils
+Extract-7Zip C:\Utils\openssl-$version.tar C:\Utils
 Rename-Item C:\Utils\openssl-$version $destination
-Remove-Item $zip
+Remove-Item -Path $zip
 Remove-Item C:\Utils\openssl-$version.tar
 
-set CC=C:\utils\android-ndk-r10e\toolchains\arm-linux-androideabi-4.9\prebuilt\windows\bin\arm-linux-androideabi-gcc
-set AR=C:\utils\android-ndk-r10e\toolchains\arm-linux-androideabi-4.9\prebuilt\windows\bin\arm-linux-androideabi-ar
-set ANDROID_DEV=C:\utils\android-ndk-r10e\platforms\android-18\arch-arm\usr
+Set-EnvironmentVariable "CC" "C:\utils\android-ndk-r10e\toolchains\arm-linux-androideabi-4.9\prebuilt\windows\bin\arm-linux-androideabi-gcc"
+Set-EnvironmentVariable "AR" "C:\utils\android-ndk-r10e\toolchains\arm-linux-androideabi-4.9\prebuilt\windows\bin\arm-linux-androideabi-ar"
+Set-EnvironmentVariable "ANDROID_DEV" "C:\utils\android-ndk-r10e\platforms\android-18\arch-arm\usr"
 
 # Make sure configure for openssl has a "make" and "perl" available
 $env:PATH = $env:PATH + ";C:\msys\1.0\bin;C:\strawberry\perl\bin"
 
-echo "Configuring OpenSSL $version for Android..."
-pushd $destination
-C:\msys\1.0\bin\bash.exe -c "c:/strawberry/perl/bin/perl Configure shared android"
-popd
+Write-Host "Configuring OpenSSL $version for Android..."
+Push-Location $destination
+Run-Executable "C:\msys\1.0\bin\bash.exe" "-c `"c:/strawberry/perl/bin/perl Configure shared android`""
+Pop-Location
 
 # Following command is needed when using version 1.1.0. With version 1.1.0 msys is not needed.
 # C:\mingw530\bin\mingw32-make.exe include\openssl\opensslconf.h
+
+Write-Output "Android OpenSSL = $version" >> ~/versions.txt

coin/provisioning/common/windows/android.ps1

@@ -66,27 +66,23 @@ function Install($1, $2, $3, $4) {
 
     Download $offcialUrl $cacheUrl $zip
     Verify-Checksum $zip "$checksum"
-    Extract-Zip $zip C:\Utils
+    Extract-7Zip $zip C:\Utils
 }
 
 function SdkUpdate ($1, $2) {
-    echo "Running Android SDK update for $1..."
+    Write-Host "Running Android SDK update for $1..."
     cmd /c "echo y |$1\tools\android update sdk --no-ui --all --filter $2"
 }
 
-echo "Installing Android ndk $nkdVersion"
+Write-Host "Installing Android ndk $nkdVersion"
 Install $ndkCachedUrl $ndkZip $ndkChecksum $ndkOfficialUrl
-echo "Set environment variable ANDROID_NDK_HOME=$ndkFolder"
-[Environment]::SetEnvironmentVariable("ANDROID_NDK_HOME", $ndkFolder, "Machine")
-echo "Set environment variable ANDROID_NDK_ROOT=$ndkFolder"
-[Environment]::SetEnvironmentVariable("ANDROID_NDK_ROOT", $ndkFolder, "Machine")
+Set-EnvironmentVariable "ANDROID_NDK_HOME" $ndkFolder
+Set-EnvironmentVariable "ANDROID_NDK_ROOT" $ndkFolder
 
-#echo "Installing Android sdk $sdkVersion"
+#Write-Host "Installing Android sdk $sdkVersion"
 Install $sdkCachedUrl $sdkZip $sdkChecksum $sdkOfficialUrl
-echo "Set environment variable ANDROID_SDK_HOME=$sdkFolder"
-[Environment]::SetEnvironmentVariable("ANDROID_SDK_HOME", $sdkFolder, "Machine")
-echo "Set environment variable ANDROID_API_VERSION $sdkApiLevel"
-[Environment]::SetEnvironmentVariable("ANDROID_API_VERSION", $sdkApiLevel, "Machine")
+Set-EnvironmentVariable "ANDROID_SDK_HOME" $sdkFolder
+Set-EnvironmentVariable "ANDROID_API_VERSION" $sdkApiLevel
 
 # SDK update
 SdkUpdate $sdkFolder $sdkApiLevel
@@ -94,5 +90,17 @@ SdkUpdate $sdkFolder tools
 SdkUpdate $sdkFolder platform-tools
 SdkUpdate $sdkFolder build-tools-$sdkBuildToolsVersion
 
-# kill adb. This process prevent's provisioning to continue
-taskkill /im adb.exe /f
+# kill adb. This process prevents provisioning to continue
+$p = Get-Process -Name "adb" -ErrorAction:SilentlyContinue
+if ($p -ne $null) {
+    Write-Host "Stopping adb.exe"
+    Stop-Process -Force $p
+} else {
+    Write-Host "adb.exe not running"
+}
+
+Write-Output "Android SDK tools= $sdkVersion" >> ~/versions.txt
+Write-Output "Android SDK Build Tools = $sdkBuildToolsVersion" >> ~/versions.txt
+Write-Output "Android SDK Api Level = $sdkApiLevel" >> ~/versions.txt
+Write-Output "Android NDK = $ndkVersion" >> ~/versions.txt
+

coin/provisioning/common/windows/cmake.ps1

@@ -36,21 +36,21 @@
 $majorminorversion = "3.6"
 $version = "3.6.2"
 
-$zip = "c:\users\qt\downloads\cmake-" + $version + "-win32-x86.zip"
+$zip = Get-DownloadLocation ("cmake-" + $version + "-win32-x86.zip")
 $officialurl = "https://cmake.org/files/v" + $majorminorversion + "/cmake-" + $version + "-win32-x86.zip"
 $cachedurl = "\\ci-files01-hki.intra.qt.io\provisioning\cmake\cmake-" + $version + "-win32-x86.zip"
 
-echo "Removing old cmake"
+Write-Host "Removing old cmake"
 Remove-Item "C:\CMake" -Force -Recurse -ErrorAction SilentlyContinue
 
 Download $officialurl $cachedurl $zip
 Verify-Checksum $zip "541F6E7EFD228E46770B8631FFE57097576E4D4E"
 
-Extract-Zip $zip C:
+Extract-7Zip $zip C:
 $defaultinstallfolder = "C:\cmake-" + $version + "-win32-x86"
 Rename-Item $defaultinstallfolder C:\CMake
 
 Add-Path "C:\CMake\bin"
 
-echo "CMake = $version" >> ~\versions.txt
+Write-Output "CMake = $version" >> ~\versions.txt
 

coin/provisioning/common/windows/disable-autoreboot.ps1

@@ -30,17 +30,6 @@
 ## $QT_END_LICENSE$
 ##
 #############################################################################
-
 . "$PSScriptRoot\helpers.ps1"
 
-# This script will install QNX 6.6.0
-
-$version = "6.6.0"
-$nondottedversion = $version -replace '[.]',''
-$targetFolder = "c:"
-$url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\qnx" + $nondottedversion + ".zip"
-
-Get-ChildItem $url_cache | % {& "C:\Utils\sevenzip\7z.exe" "x" $_.fullname -o"C:\"}
-
-[Environment]::SetEnvironmentVariable("QNX_660", "$targetFolder", "Machine")
-echo "QNX = $version" >> ~\versions.txt
+Get-WmiObject Win32_OSRecoveryConfiguration -EnableAllPrivileges | Set-WmiInstance -Arguments @{ AutoReboot=$False }

coin/provisioning/common/windows/disable-ntp.ps1

@@ -1,2 +1,4 @@
+. "$PSScriptRoot\helpers.ps1"
+
 # Disable the NTP from syncing
-w32tm /config /syncfromflags:NO
+Run-Executable "w32tm.exe" "/config /syncfromflags:NO"

coin/provisioning/common/windows/disable-sleep.ps1

@@ -30,10 +30,11 @@
 ## $QT_END_LICENSE$
 ##
 #############################################################################
+. "$PSScriptRoot\helpers.ps1"
 
 # This script prevents Windows from going to sleep
 
-powercfg -change -monitor-timeout-ac 0
-powercfg -change -standby-timeout-ac 0
-powercfg -change -disk-timeout-ac 0
-powercfg -change -hibernate-timeout-ac 0
+Run-Executable "powercfg.exe" "-change -monitor-timeout-ac 0"
+Run-Executable "powercfg.exe" "-change -standby-timeout-ac 0"
+Run-Executable "powercfg.exe" "-change -disk-timeout-ac 0"
+Run-Executable "powercfg.exe" "-change -hibernate-timeout-ac 0"

coin/provisioning/common/windows/disable-uac.ps1

@@ -30,7 +30,8 @@
 ## $QT_END_LICENSE$
 ##
 #############################################################################
+. "$PSScriptRoot\helpers.ps1"
 
 # This script disables the Windows UAC
 
-C:\Windows\System32\cmd.exe /k %windir%\System32\reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 0 /f
+Run-Executable "reg.exe" "ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 0 /f"

coin/provisioning/common/windows/disable-windefender.ps1

@@ -2,4 +2,7 @@
 #
 # If disabled manually, windows will automatically enable it after
 # some period of time. Disabling it speeds up the builds.
-REG ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender" /V DisableAntiSpyware /T REG_dWORD /D 1 /F
+
+. "$PSScriptRoot\helpers.ps1"
+
+Run-Executable "reg.exe" "ADD `"HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender`" /V DisableAntiSpyware /T REG_dWORD /D 1 /F"

coin/provisioning/common/windows/disable-windows-updates.ps1

@@ -43,7 +43,7 @@ if ($service.Status -eq "Stopped") {
     Write-Host "Windows Update service already stopped."
 } else {
     Write-Host "Stopping Windows Update service."
-    stop-service wuauserv
+    Stop-Service -Name "wuauserv" -Force
 }
 
 $startup = Get-WmiObject Win32_Service | Where-Object {$_.Name -eq "wuauserv"} | Select -ExpandProperty "StartMode"

coin/provisioning/common/windows/dxsdk.ps1

@@ -11,9 +11,9 @@ $exe = "C:\Windows\Temp\$package"
 
 Download $officialUrl $cachedUrl $exe
 
-echo "Installing DirectX SDK"
-cmd /c "$exe /u"
+Write-Host "Installing DirectX SDK"
+Run-Executable $exe "/u"
 
-Remove-Item $exe
+Remove-Item -Path $exe
 
-echo "DirectX SDK = 9.29.1962 (Jun 10)" >> ~\versions.txt
+Write-Output "DirectX SDK = 9.29.1962 (Jun 10)" >> ~\versions.txt

coin/provisioning/common/windows/exceutequeueditems.ps1

@@ -0,0 +1,39 @@
+#############################################################################
+##
+## Copyright (C) 2018 The Qt Company Ltd.
+## Contact: http://www.qt.io/licensing/
+##
+## This file is part of the provisioning scripts of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL21$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and The Qt Company. For licensing terms
+## and conditions see http://www.qt.io/terms-conditions. For further
+## information use the contact form at http://www.qt.io/contact-us.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 or version 3 as published by the Free
+## Software Foundation and appearing in the file LICENSE.LGPLv21 and
+## LICENSE.LGPLv3 included in the packaging of this file. Please review the
+## following information to ensure the GNU Lesser General Public License
+## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## As a special exception, The Qt Company gives you certain additional
+## rights. These rights are described in The Qt Company LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
+. "$PSScriptRoot\helpers.ps1"
+
+Start-Process -NoNewWindow -FilePath "C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\ngen.exe" -ArgumentList ExecuteQueuedItems -Wait
+
+if( (is64bitWinHost) -eq 1 ) {
+   Start-Process -NoNewWindow -FilePath "C:\WINDOWS\Microsoft.NET\Framework64\v4.0.30319\ngen.exe" -ArgumentList ExecuteQueuedItems -Wait
+}

coin/provisioning/common/windows/fbx_windows.ps1

@@ -51,18 +51,16 @@ $sha1 = "3690400625672bef6369bcf90dcde4d78b493b24"
 #$targetFile = "C:\Windows\Temp\$packageName"
 $targetFolder = "C:\Program Files\"
 
-#echo "Downloading '$installerName'"
+#Write-Host "Downloading '$installerName'"
 #Download $officialUrl $cacheUrl $targetFile
 #Verify-Checksum $targetFile $sha1
 
-echo "Extracting '$cacheUrl'"
-#Extract-7Zip $cacheUrl $targetFolder
-Start-Process -FilePath "C:\Utils\sevenzip\7z.exe" -ArgumentList "x -y `"$cacheUrl`" -o`"$targetFolder`"" -Wait
+Write-Host "Extracting '$cacheUrl'"
+Extract-7Zip $cacheUrl $targetFolder
 
 #Remove-Item -Recurse -Force "$packageName"
 
-echo "Adding environment variables."
-[Environment]::SetEnvironmentVariable("FBXSDK", "$targetFolder\Autodesk\FBX\FBX SDK\2016.1.2", [EnvironmentVariableTarget]::Machine)
+Set-EnvironmentVariable "FBXSDK" "$targetFolder\Autodesk\FBX\FBX SDK\2016.1.2"
 
-echo "FBX SDK = $version" >> ~\versions.txt
+Write-Output "FBX SDK = $version" >> ~\versions.txt
 

coin/provisioning/common/windows/helpers.ps1

@@ -5,13 +5,32 @@ function Verify-Checksum
         [string]$Expected=$(throw("Checksum required")),
         [ValidateSet("sha1","md5")][string]$Algorithm="sha1"
     )
+    Write-Host "Verifying checksum of $File"
     $fs = new-object System.IO.FileStream $File, "Open"
     $algo = [type]"System.Security.Cryptography.$Algorithm"
     $crypto = $algo::Create()
     $hash = [BitConverter]::ToString($crypto.ComputeHash($fs)).Replace("-", "")
     $fs.Close()
     if ($hash -ne $Expected) {
-        Write-Error "Checksum verification failed, got: '$hash' expected: '$Expected'"
+        throw "Checksum verification failed, got: '$hash' expected: '$Expected'"
+    }
+}
+
+function Run-Executable
+{
+    Param (
+        [string]$Executable=$(throw("You must specify a program to run.")),
+        [string[]]$Arguments
+    )
+    if ([string]::IsNullOrEmpty($Arguments)) {
+        Write-Host "Running `"$Executable`""
+        $p = Start-Process -FilePath "$Executable" -Wait -PassThru
+    } else {
+        Write-Host "Running `"$Executable`" with arguments `"$Arguments`""
+        $p = Start-Process -FilePath "$Executable" -ArgumentList $Arguments -Wait -PassThru
+    }
+    if ($p.ExitCode -ne 0) {
+        throw "Process $($Executable) exited with exit code $($p.ExitCode)"
     }
 }
 
@@ -19,66 +38,27 @@ function Extract-7Zip
 {
     Param (
         [string]$Source,
-        [string]$Destination
+        [string]$Destination,
+        [string]$Filter
     )
-    echo "Extracting '$Source' to '$Destination'..."
+    Write-Host "Extracting '$Source' to '$Destination'..."
 
     if ((Get-Command "7z.exe" -ErrorAction SilentlyContinue) -eq $null) {
-        $zipExe = join-path (${env:ProgramFiles(x86)}, ${env:ProgramFiles} -ne $null)[0] '7-zip\7z.exe'
+        $zipExe = join-path (${env:ProgramFiles(x86)}, ${env:ProgramFiles}, ${env:ProgramW6432} -ne $null)[0] '7-zip\7z.exe'
         if (-not (test-path $zipExe)) {
-            $zipExe = join-path ${env:ProgramW6432} '7-zip\7z.exe'
+            $zipExe = "C:\Utils\sevenzip\7z.exe"
             if (-not (test-path $zipExe)) {
-                $zipExe = "C:\Utils\sevenzip\7z.exe"
-                if (-not (test-path $zipExe)) {
-                    throw "Could not find 7-zip."
-                }
+                throw "Could not find 7-zip."
             }
         }
     } else {
         $zipExe = "7z.exe"
     }
 
-    & $zipExe x $Source "-o$Destination" -y
-}
-
-function Extract-Zip
-{
-    Param (
-        [string]$Source,
-        [string]$Destination
-    )
-    echo "Extracting '$Source' to '$Destination'..."
-
-    New-Item -ItemType Directory -Force -Path $Destination
-    $shell = new-object -com shell.application
-    $zipfile = $shell.Namespace($Source)
-    $destinationFolder = $shell.Namespace($Destination)
-    $destinationFolder.CopyHere($zipfile.Items(), 16)
-}
-
-function Extract-Dev-Folders-From-Zip
-{
-    Param (
-        [string]$package,
-        [string]$zipDir,
-        [string]$installPath
-    )
-
-    $shell = new-object -com shell.application
-
-    echo "Extracting contents of $package"
-    foreach ($subDir in "lib", "include", "bin", "share") {
-        $zip = $shell.Namespace($package + "\" + $zipDir + "\" + $subDir)
-        if ($zip) {
-            Write-Host "Extracting $subDir from zip archive"
-        } else {
-            Write-Host "$subDir is missing from zip archive - skipping"
-            continue
-        }
-        $destDir = $installPath + "\" + $subdir
-        New-Item $destDir -type directory
-        $destinationFolder = $shell.Namespace($destDir)
-        $destinationFolder.CopyHere($zip.Items(), 16)
+    if ([string]::IsNullOrEmpty($Filter)) {
+        Run-Executable "$zipExe" "x -y `"-o$Destination`" `"$Source`""
+    } else {
+        Run-Executable "$zipExe" "x -y -aoa `"-o$Destination`" `"$Source`" $Filter"
     }
 }
 
@@ -88,6 +68,17 @@ function BadParam
     throw("You must specify $Description")
 }
 
+function Get-DefaultDownloadLocation
+{
+    return $env:USERPROFILE + "\downloads\"
+}
+
+function Get-DownloadLocation
+{
+    Param ([string]$TargetName = $(BadParam("a target filename")))
+    return (Get-DefaultDownloadLocation) + $TargetName
+}
+
 function Download
 {
     Param (
@@ -96,13 +87,16 @@ function Download
         [string] $Destination = $(BadParam("a download target location"))
     )
     $ProgressPreference = 'SilentlyContinue'
+    [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12
     try {
+        Write-Host "Downloading from cached location ($CachedUrl) to $Destination"
         if ($CachedUrl.StartsWith("http")) {
             Invoke-WebRequest -UseBasicParsing $CachedUrl -OutFile $Destination
         } else {
             Copy-Item $CachedUrl $Destination
         }
     } catch {
+        Write-Host "Cached download failed: Downloading from official location: $OfficialUrl"
         Invoke-WebRequest -UseBasicParsing $OfficialUrl -OutFile $Destination
     }
 }
@@ -112,34 +106,33 @@ function Add-Path
     Param (
         [string]$Path
     )
-    echo "Adding $Path to Path"
+    Write-Host "Adding $Path to Path"
 
     $oldPath = [System.Environment]::GetEnvironmentVariable('Path', 'Machine')
     [Environment]::SetEnvironmentVariable("Path", $oldPath + ";$Path", [EnvironmentVariableTarget]::Machine)
+    $Env:PATH = [System.Environment]::GetEnvironmentVariable('Path', 'Machine')
 }
 
-function is64bitWinHost
-{
-    if(($env:PROCESSOR_ARCHITECTURE -eq "AMD64") -or ($env:PROCESSOR_ARCHITEW6432 -eq "AMD64")) {
-        return 1
-    }
-    else {
-        return 0
-    }
-}
-
-Function Execute-Command
+function Set-EnvironmentVariable
 {
     Param (
-       [string]$command
+        [string]$Key = $(BadParam("a key")),
+        [string]$Value = $(BadParam("a value."))
     )
-    Try {
-        echo "Executing command '$command'..."
-        $process = Start-Process -FilePath "cmd" -ArgumentList "/c $command" -PassThru -Wait -WindowStyle Hidden
-        if ($process.ExitCode) {throw "Error running command: '$command'"}
-    }
-    Catch {
-        $_.Exception.Message
-        exit 1
-    }
+    Write-Host "Setting environment variable `"$($Key)`" to `"$($Value)`""
+
+    [Environment]::SetEnvironmentVariable($Key, $Value, [EnvironmentVariableTarget]::Machine)
+}
+
+function Is64BitWinHost
+{
+    return [environment]::Is64BitOperatingSystem
+}
+
+function IsProxyEnabled {
+    return (Get-ItemProperty -Path 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings').proxyEnable
+}
+
+function Get-Proxy {
+    return (Get-ItemProperty -Path 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings').proxyServer
 }

coin/provisioning/common/windows/icu.ps1

@@ -37,53 +37,11 @@
 
 $version = "53_1"
 
-if(($env:PROCESSOR_ARCHITECTURE -eq "AMD64") -or ($env:PROCESSOR_ARCHITEW6432 -eq "AMD64")) {
-
-   $url_official_2013 = "http://download.qt.io/development_releases/prebuilt/icu/prebuilt/msvc2013/icu_" + $version + "_msvc_2013_64_devel.7z"
-   $url_cache_2013 = "\\ci-files01-hki.intra.qt.io/provisioning/windows/icu_" + $version + "_msvc_2013_64_devel.7z"
-   $sha1_2013 = "7267CF8C5BD39C4218F2CCFE31ECA81B7644ED6F"
-
-   $icuPackage_msvc2013_64 = "C:\Windows\Temp\icu-$version-msvc2013_64.7z"
-
-   if (!(Test-Path C:\Utils\icu_"$version"_msvc_2013_64_devel\)) {
-      echo "Fetching from URL ..."
-      Download $url_official_2013 $url_cache_2013 $icuPackage_msvc2013_64
-      Verify-Checksum $icuPackage_msvc2013_64 $sha1_2013
-      Get-ChildItem $icuPackage_msvc2013_64 | % {& "C:\Utils\sevenzip\7z.exe" "x" $_.fullname -o""C:\Utils\icu_"$version"_msvc_2013_64_devel\""}
-
-      echo "Cleaning $icuPackage_msvc2013_64..."
-      Remove-Item -Recurse -Force $icuPackage_msvc2013_64
-
-      echo "ICU MSVC2013 = $version" >> ~\versions.txt
-   }
-
-# FIXME: do we really want to have it per MSVC version? What about MSVC2015?
-[Environment]::SetEnvironmentVariable("CI_ICU_PATH_MSVC2013", "C:\\Utils\\icu_53_1_msvc_2013_64_devel\\icu53_1", "Machine")
+if (Is64BitWinHost) {
 
 # FIXME: do we really want to use the 4.8.2 ICU build?
-[Environment]::SetEnvironmentVariable("CI_ICU_PATH_Mingw49", "C:\Utils\icu_53_1_Mingw_builds_4_8_2_posix_seh_64_devel\icu53_1", "Machine")
-
-} else {
-
-   $url_official_2013_32 = "http://download.qt.io/development_releases/prebuilt/icu/prebuilt/msvc2013/icu_" + $version + "_msvc_2013_32_devel.7z"
-   $url_cache_2013_32 = "\\ci-files01-hki.intra.qt.io/provisioning/windows/icu_" + $version + "_msvc_2013_32_devel.7z"
-   $sha1_2013_32 = "D745A5F0F6A3817AE989501A01A5A0BA53FDB800"
-
-   $icuPackage_msvc2013_32 = "C:\Windows\Temp\icu-$version-msvc2013_32.7z"
-
-   if (!(Test-Path C:\Utils\icu_"$version"_msvc_2013_32_devel\)) {
-      echo "Fetching from URL ..."
-      Download $url_official_2013_32 $url_cache_2013_32 $icuPackage_msvc2013_32
-      Verify-Checksum $icuPackage_msvc2013_32 $sha1_2013_32
-      Get-ChildItem $icuPackage_msvc2013_32 | % {& "C:\Utils\sevenzip\7z.exe" "x" $_.fullname -o""C:\Utils\icu_"$version"_msvc_2013_32_devel\""}
-
-      echo "Cleaning $icuPackage_msvc2013_32..."
-      Remove-Item -Recurse -Force $icuPackage_msvc2013_32
-
-      echo "ICU MSVC2013 = $version" >> ~\versions.txt
-   }
-
-# FIXME: do we really want to have it per MSVC version? What about MSVC2015?
-[Environment]::SetEnvironmentVariable("CI_ICU_PATH_MSVC2013", "C:\\Utils\\icu_53_1_msvc_2013_32_devel\\icu53_1", "Machine")
+Set-EnvironmentVariable "CI_ICU_PATH_Mingw49" "C:\Utils\icu_53_1_Mingw_builds_4_8_2_posix_seh_64_devel\icu53_1"
 
 }
+
+Write-Output "ICU = $version" >> ~\versions.txt

coin/provisioning/common/windows/install-dependencywalker.ps1

@@ -36,11 +36,10 @@
 # This script will install Dependency Walker 2.2.6000
 
 $version = "2.2.6000"
-if( (is64bitWinHost) -eq 1 ) {
+if (Is64BitWinHost) {
     $arch = "_x64"
     $sha1 = "4831D2A8376D64110FF9CD18799FE6C69509D3EA"
-}
-else {
+} else {
     $arch = "_x86"
     $sha1 = "bfec714057e8449b0246051be99ba46a7760bab9"
 }
@@ -49,15 +48,15 @@ $url_official = "http://www.dependencywalker.com/depends22" + $arch + ".zip"
 $dependsPackage = "C:\Windows\Temp\depends-$version.zip"
 
 $TARGETDIR = "C:\Utils\dependencywalker"
-if(!(Test-Path -Path $TARGETDIR )){
+if (!(Test-Path -Path $TARGETDIR )) {
     New-Item -ItemType directory -Path $TARGETDIR
 }
 Download $url_official $url_cache $dependsPackage
 Verify-Checksum $dependsPackage $sha1
 
-Get-ChildItem $dependsPackage | % {& "C:\Utils\sevenzip\7z.exe" "x" $_.fullname "-o$TARGETDIR"}
+Extract-7Zip $dependsPackage $TARGETDIR
 
-echo "Cleaning $dependsPackage.."
-Remove-Item -Recurse -Force "$dependsPackage"
+Write-Host "Cleaning $dependsPackage.."
+Remove-Item -Recurse -Force -Path "$dependsPackage"
 
-echo "Dependency Walker = $version" >> ~\versions.txt
+Write-Output "Dependency Walker = $version" >> ~\versions.txt

coin/provisioning/common/windows/install-git.ps1

@@ -35,11 +35,10 @@
 # Install Git version 2.13.0
 
 $version = "2.13.0"
-if( (is64bitWinHost) -eq 1 ) {
+if (Is64BitWinHost) {
     $arch = "-64-bit"
     $sha1 = "E1D7C6E5E16ACAF3C108064A2ED158F604FA29A7"
-}
-else {
+} else {
     $arch = "-32-bit"
     $sha1 = "03c7df2e4ef61ea6b6f9c0eb7e6d5151d9682aec"
 }
@@ -47,11 +46,11 @@ $gitPackage = "C:\Windows\Temp\Git-" + $version + $arch + ".exe"
 $url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\Git-" + $version + $arch + ".exe"
 $url_official = "https://github.com/git-for-windows/git/releases/download/v" + $version + ".windows.1/Git-" + $version + $arch + ".exe"
 
-echo "Fetching Git $version..."
+Write-Host "Fetching Git $version..."
 Download $url_official $url_cache $gitPackage
 Verify-Checksum $gitPackage $sha1
-echo "Installing Git $version..."
-cmd /c "$gitPackage /SILENT /COMPONENTS="icons,ext\reg\shellhere,assoc,assoc_sh""
-remove-item $gitPackage
+Write-Host "Installing Git $version..."
+Run-Executable "$gitPackage" "/SILENT /COMPONENTS=`"icons,ext\reg\shellhere,assoc,assoc_sh`""
+Remove-Item -Path $gitPackage
 
-echo "Git = $version" >> ~\versions.txt
+Write-Output "Git = $version" >> ~\versions.txt

coin/provisioning/common/windows/install-jdk.ps1

@@ -38,11 +38,10 @@
 $installdir = "C:\Program Files\Java\jdk1.8.0_144"
 
 $version = "8u144"
-if( (is64bitWinHost) -eq 1 ) {
+if (Is64BitWinHost) {
     $arch = "x64"
     $sha1 = "adb03bc3f4b40bcb3227687860798981d58e1858"
-}
-else {
+} else {
     $arch = "i586"
     $sha1 = "3b9ab95914514eaefd72b815c5d9dd84c8e216fc"
 }
@@ -51,28 +50,31 @@ $url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\jdk-" + $version
 $official_url = "http://download.oracle.com/otn-pub/java/jdk/8u144-b01/090f390dda5b47b9b721c7dfaa008135/jdk-" + $version + "-windows-" + $arch + ".exe"
 $javaPackage = "C:\Windows\Temp\jdk-$version.exe"
 
-echo "Fetching Java SE $version..."
+Write-Host "Fetching Java SE $version..."
 $ProgressPreference = 'SilentlyContinue'
 try {
-    echo "...from local cache"
-    Invoke-WebRequest -UseBasicParsing $url_cache -OutFile $javaPackage
+    Write-Host "...from local cache"
+    Download $url_cache $url_cache $javaPackage
 } catch {
-    echo "...from oracle.com"
+    Write-Host "...from oracle.com"
     $client = new-object System.Net.WebClient
     $cookie = "oraclelicense=accept-securebackup-cookie"
     $client.Headers.Add("Cookie", $cookie)
     $client.DownloadFile($official_url, $javaPackage)
 
-    Invoke-WebRequest -UseBasicParsing $official_url -OutFile $javaPackage
+    Download $official_url $official_url $javaPackage
 }
 
 Verify-Checksum $javaPackage $sha1
 
-cmd /c "$javaPackage /s SPONSORS=0"
-echo "Cleaning $javaPackage.."
-Remove-Item -Recurse -Force "$javaPackage"
+Run-Executable "$javaPackage" "/s SPONSORS=0"
+Write-Host "Cleaning $javaPackage.."
+Remove-Item -Recurse -Force -Path "$javaPackage"
 
-[Environment]::SetEnvironmentVariable("JAVA_HOME", "$installdir", [EnvironmentVariableTarget]::Machine)
+Write-Host "Remove Java update from startup"
+reg delete "HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Run" /v SunJavaUpdateSched /f
+
+Set-EnvironmentVariable "JAVA_HOME" "$installdir"
 Add-Path "$installdir\bin"
 
-echo "Java SE = $version $arch" >> ~\versions.txt
+Write-Output "Java SE = $version $arch" >> ~\versions.txt

coin/provisioning/common/windows/install-mingw.ps1

@@ -55,14 +55,13 @@ function InstallMinGW
     Download $url_official $url_cache $mingwPackage
     Verify-Checksum $mingwPackage $sha1
 
-    Get-ChildItem $mingwPackage | % {& "C:\Utils\sevenzip\7z.exe" "x" $_.fullname "-o$TARGETDIR"}
+    Extract-7Zip $mingwPackage $TARGETDIR
 
-    echo "Adding MinGW environment variable."
-    [Environment]::SetEnvironmentVariable("$envvar", "$targetdir\mingw32", [EnvironmentVariableTarget]::Machine)
+    Set-EnvironmentVariable "$envvar" ("$targetdir\mingw" + $win_arch.Substring($win_arch.get_Length()-2))
 
-    echo "Cleaning $mingwPackage.."
-    Remove-Item -Recurse -Force "$mingwPackage"
+    Write-Host "Cleaning $mingwPackage.."
+    Remove-Item -Recurse -Force -Path "$mingwPackage"
 
-    echo "MinGW = $version $release" >> ~\versions.txt
+    Write-Output "MinGW = $version $release" >> ~\versions.txt
 
 }

coin/provisioning/common/windows/install-notepad++.ps1

@@ -36,11 +36,10 @@
 # This script will install Notepad++
 
 $version = "7.3"
-if( (is64bitWinHost) -eq 1 ) {
+if (Is64BitWinHost) {
     $arch = ".x64"
     $sha1 = "E7306DF1D6E81801FB4BE0868610DB70E979B0AA"
-}
-else {
+} else {
     $arch = ""
     $sha1 = "d4c403675a21cc381f640b92e596bae3ef958dc6"
 }
@@ -50,13 +49,12 @@ $nppPackage = "C:\Windows\Temp\npp-$version.exe"
 
 Download $url_official $url_cache $nppPackage
 Verify-Checksum $nppPackage $sha1
-cmd /c "$nppPackage /S"
+Run-Executable "$nppPackage" "/S"
 
-echo "Cleaning $nppPackage.."
-Remove-Item -Recurse -Force "$nppPackage"
+Write-Host "Cleaning $nppPackage.."
+Remove-Item -Recurse -Force -Path "$nppPackage"
 
-echo "Notepad++ = $version" >> ~\versions.txt
+Write-Output "Notepad++ = $version" >> ~\versions.txt
 
+Write-Host "Disabling auto updates."
 Rename-Item -Path "C:\Program Files\Notepad++\updater" -NewName "updater_disabled"
-
-echo "Auto-updating disabled."

coin/provisioning/common/windows/install-ruby.ps1

@@ -36,11 +36,10 @@
 # This script will install Ruby
 
 $version = "2.4.2-2"
-if( (is64bitWinHost) -eq 1 ) {
+if (Is64BitWinHost) {
     $arch = "-x64"
     $sha1 = "c961c2752a183487bc42ed24beb7e931230fa7d5"
-}
-else {
+} else {
     $arch = "-x86"
     $sha1 = "2639a481c3b5ad11f57d5523cc41ca884286089e"
 }
@@ -50,9 +49,9 @@ $rubyPackage = "C:\Windows\Temp\rubyinstaller-$version.exe"
 
 Download $url_official $url_cache $rubyPackage
 Verify-Checksum $rubyPackage $sha1
-Start-Process -FilePath $rubyPackage -ArgumentList "/dir=C:\Ruby-$version$arch /tasks=modpath /verysilent" -Wait
+Run-Executable $rubyPackage "/dir=C:\Ruby-$version$arch /tasks=modpath /verysilent"
 
-echo "Cleaning $rubyPackage.."
-Remove-Item -Recurse -Force "$rubyPackage"
+Write-Host "Cleaning $rubyPackage.."
+Remove-Item -Recurse -Force -Path "$rubyPackage"
 
-echo "Ruby = $version" >> ~\versions.txt
+Write-Output "Ruby = $version" >> ~\versions.txt

coin/provisioning/common/windows/install-sevenzip.ps1

@@ -38,11 +38,10 @@
 $version = "16.04"
 $nonDottedVersion = "1604"
 
-if( (is64bitWinHost) -eq 1 ) {
+if (Is64BitWinHost) {
     $arch = "-x64"
     $sha1 = "338A5CC5200E98EDD644FC21807FDBE59910C4D0"
-}
-else {
+} else {
     $arch = ""
     $sha1 = "dd1cb1163c5572951c9cd27f5a8dd550b33c58a4"
 }
@@ -54,11 +53,11 @@ $7zTargetLocation = "C:\Utils\sevenzip\"
 
 Download $url_official $url_cache $7zPackage
 Verify-Checksum $7zPackage $sha1
-Start-Process -FilePath $7zPackage -ArgumentList "/S","/D=$7zTargetLocation" -Wait
+Run-Executable $7zPackage "/S","/D=$7zTargetLocation"
 
-echo "Cleaning $7zPackage.."
-Remove-Item -Recurse -Force "$7zPackage"
+Write-Host "Cleaning $7zPackage.."
+Remove-Item -Recurse -Force -Path "$7zPackage"
 
 Add-Path $7zTargetLocation
 
-echo "7-Zip = $version" >> ~\versions.txt
+Write-Output "7-Zip = $version" >> ~\versions.txt

coin/provisioning/common/windows/install-strawberry-perl.ps1

@@ -36,23 +36,23 @@
 # This script installs Strawberry Perl
 
 $version = "5.26.0.1"
-if( (is64bitWinHost) -eq 1 ) {
+if (Is64BitWinHost) {
     $arch = "-64bit"
     $sha1 = "2AE2EDA36A190701399130CBFEE04D00E9BA036D"
-}
-else {
+} else {
     $arch = "-32bit"
     $sha1 = "b50b688a879f33941433774b2813bfd4b917e4ee"
 }
-$url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\strawberry-perl-" + $version + $arch + ".msi"
-$url_official = "http://strawberryperl.com/download/" + $version + "/strawberry-perl-" + $version + $arch + ".msi"
-$strawberryPackage = "C:\Windows\Temp\strawberry-installer-$version.msi"
+$installer_name = "strawberry-perl-" + $version + $arch + ".msi"
+$url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\" + $installer_name
+$url_official = "http://strawberryperl.com/download/" + $version + "/" + $installer_name
+$strawberryPackage = "C:\Windows\Temp\" + $installer_name
 
 Download $url_official $url_cache $strawberryPackage
 Verify-Checksum $strawberryPackage $sha1
-cmd /c "$strawberryPackage /QB INSTALLDIR=C:\strawberry REBOOT=REALLYSUPPRESS"
+Run-Executable "$strawberryPackage" "/QB INSTALLDIR=C:\strawberry REBOOT=REALLYSUPPRESS"
 
-echo "Cleaning $strawberryPackage.."
-Remove-Item -Recurse -Force "$strawberryPackage"
+Write-Host "Cleaning $strawberryPackage.."
+Remove-Item -Recurse -Force -Path "$strawberryPackage"
 
-echo "strawberry = $version" >> ~\versions.txt
+Write-Output "strawberry = $version" >> ~\versions.txt

coin/provisioning/common/windows/jom.ps1

@@ -1,9 +1,13 @@
 . "$PSScriptRoot\helpers.ps1"
 
-$zip = "c:\users\qt\downloads\jom_1_1_2.zip"
+$version = "1_1_2"
+$zip = Get-DownloadLocation "jom_$version.zip"
 
-Invoke-WebRequest -UseBasicParsing http://download.qt.io/official_releases/jom/jom_1_1_2.zip -OutFile $zip
+Download http://download.qt.io/official_releases/jom/jom_$version.zip http://ci-files01-hki.ci.local/input/windows/jom_$version.zip $zip
 Verify-Checksum $zip "80EE5678E714DE99DDAF5F7593AB04DB1C7928E4"
-Extract-Zip $zip C:\Utils\Jom
+Extract-7Zip $zip C:\Utils\Jom
 
-[Environment]::SetEnvironmentVariable("CI_JOM_PATH", "C:\Utils\Jom", "Machine")
+Set-EnvironmentVariable "CI_JOM_PATH" "C:\Utils\Jom"
+
+$version = $version.replace('_','.')
+Write-Output "Jom = $version" >> ~/versions.txt

coin/provisioning/common/windows/libclang.ps1

@@ -1,32 +1,81 @@
-param([Int32]$archVer=32)
+param(
+    [Int32]$archVer=32,
+    [string]$toolchain="vs2015",
+    [bool]$setDefault=$true
+)
 . "$PSScriptRoot\helpers.ps1"
 
+$libclang_version="6.0"
+Write-Output "libClang = $libclang_version" >> ~/versions.txt
+
 # PySide versions following 5.6 use a C++ parser based on Clang (http://clang.org/).
 # The Clang library (C-bindings), version 3.9 or higher is required for building.
 
-Get-Content "$PSScriptRoot\..\shared\sw_versions.txt" | Foreach-Object {
-    $var = $_.Split('=')
-    New-Variable -Name $var[0] -Value $var[1]
-    $libclang_version = $libclang_version -replace '["."]'
+# Starting from Qt 5.11 QDoc requires Clang to parse C++
+
+$baseDestination = "C:\Utils\libclang-" + $libclang_version + "-" + $toolchain
+$libclang_version = $libclang_version -replace '["."]'
+
+function install() {
+
+    param(
+        [string]$sha1=$1,
+        [string]$destination=$2
+    )
+
+    $zip = "c:\users\qt\downloads\libclang.7z"
+
+    $script:OfficialUrl = "https://download.qt.io/development_releases/prebuilt/libclang/qt/libclang-release_$libclang_version-windows-$toolchain`_$archVer.7z"
+    $script:CachedUrl = "http://ci-files01-hki.intra.qt.io/input/libclang/qt/libclang-release_$libclang_version-windows-$toolchain`_$archVer.7z"
+
+    Download $OfficialUrl $CachedUrl $zip
+    Verify-Checksum $zip $sha1
+    Extract-7Zip $zip C:\Utils\
+    Rename-Item C:\Utils\libclang $destination
+    Remove-Item -Force -Path $zip
 }
 
-if ( $archVer -eq 64 ) {
-    $sha1 = "dc42beb0efff130c4d7dfef3c97adf26f1ab04e0"
-    $url = "https://download.qt.io/development_releases/prebuilt/libclang/libclang-release_$libclang_version-windows-vs2015_64.7z"
-} else {
-    $sha1 = "64e826c00ae632fbb28655e6e1fa9194980e1205"
-    $url = "https://download.qt.io/development_releases/prebuilt/libclang/libclang-release_$libclang_version-windows-vs2015_32.7z"
+$toolchainSuffix = ""
+
+if ( $toolchain -eq "vs2015" ) {
+    if ( $archVer -eq 64 ) {
+        $sha1 = "a399af949271e6d3bfc578ea2c17ff1d6c6318b9"
+        $destination = $baseDestination + "-64"
+
+        install $sha1 $destination
+    }
+
+    $archVer=32
+    $sha1 = "aa3f68f1cfa87780a4631a98ce883d3d9cb94330"
+    $destination = $baseDestination + "-32"
+
+    install $sha1 $destination
+    $toolchainSuffix = "msvc"
 }
 
-$zip = "c:\users\qt\downloads\libclang.7z"
-$destination = "C:\Utils\libclang-" + $libclang_version
+if ( $toolchain -eq "mingw" ) {
+    if ( $archVer -eq 64 ) {
+        $sha1 = "b382502f82d1cfa7d3cc3016d909d37edc19c22c"
+        $destination = $baseDestination + "-64"
 
-Download $url $url $zip
-Verify-Checksum $zip $sha1
+        install $sha1 $destination
+    }
 
-C:\Utils\sevenzip\7z.exe x $zip -oC:\Utils\
-Rename-Item C:\Utils\libclang $destination
+    $archVer=32
+    $sha1 = "cbc68e0f93f4cb0ed7084a045b7c07a1980a2a44"
+    $destination = $baseDestination + "-32"
 
-[Environment]::SetEnvironmentVariable("LLVM_INSTALL_DIR", $destination, [EnvironmentVariableTarget]::Machine)
-del $zip
-echo "libClang = $libclang_version" >> ~/versions.txt
+    install $sha1 $destination
+    $toolchainSuffix = "mingw"
+}
+
+if ( $setDefault ) {
+    Set-EnvironmentVariable "LLVM_INSTALL_DIR" ($baseDestination + "-_ARCH_")
+}
+Set-EnvironmentVariable ("LLVM_INSTALL_DIR_" + $toolchainSuffix) ($baseDestination + "-_ARCH_")
+
+if ( $libclang_version -eq "60" ) {
+    # This is a hacked static build of libclang which requires special
+    # handling on the qdoc side.
+    Set-EnvironmentVariable "QDOC_USE_STATIC_LIBCLANG" "1"
+}

coin/provisioning/common/windows/libusb.ps1

@@ -35,7 +35,7 @@
 
 . "$PSScriptRoot\helpers.ps1"
 
-$archive = "C:\users\qt\downloads\libusb-1.0.21-ife3db79196-msvc2015.7z"
+$archive = Get-DownloadLocation "libusb-1.0.21-ife3db79196-msvc2015.7z"
 $libusb_location = "C:\Utils\libusb-1.0"
 
 Copy-Item \\ci-files01-hki.intra.qt.io\provisioning\libusb-1.0\libusb-1.0.21-ife3db79196-msvc2015.7z $archive
@@ -44,4 +44,6 @@ Verify-Checksum $archive "396a3224c306480f24a583850d923d06aa4377c1"
 Extract-7Zip $archive $libusb_location
 
 # Tell qt-apps/qdb build system where to find libusb
-[Environment]::SetEnvironmentVariable("LIBUSB_PATH", $libusb_location, "Machine")
+Set-EnvironmentVariable "LIBUSB_PATH" $libusb_location
+
+Write-Output "libusb = libusb-1.0.21" >> ~/versions.txt

coin/provisioning/common/windows/memorypershell.ps1

@@ -1,3 +1,3 @@
 # This is needed e.g. for Android NDK installation for Windows 7 x86
-echo "Increase value of MaxMemoryPerShellMB to avoid 'out of memory' exception"
+Write-Host "Increase value of MaxMemoryPerShellMB to avoid 'out of memory' exception"
 set-item wsman:localhost\Shell\MaxMemoryPerShellMB 2048

coin/provisioning/common/windows/mesa_llvmpipe.ps1

@@ -35,29 +35,32 @@
 $version = "11_2_2"
 $package = "C:\Windows\temp\opengl32sw.7z"
 $mesaOpenglSha1_64 = "b2ffa5f230a0caa2c2e0bb9a5398bcfb81a0e5d1"
-$mesaOpenglUrl_64 = "http://download.qt.io/development_releases/prebuilt/llvmpipe/windows/opengl32sw-64-mesa_$version.7z"
+$mesaOpenglUrl_64_cache = "http://ci-files01-hki.intra.qt.io/input/windows/opengl32sw-64-mesa_$version.7z"
+$mesaOpenglUrl_64_alt = "http://download.qt.io/development_releases/prebuilt/llvmpipe/windows/opengl32sw-64-mesa_$version.7z"
 $mesaOpenglSha1_32 = "e742e9d4e16b9c69b6d844940861d3ef1748356b"
-$mesaOpenglUrl_32 = "http://download.qt.io/development_releases/prebuilt/llvmpipe/windows/opengl32sw-32-mesa_$version.7z"
+$mesaOpenglUrl_32_cache = "http://ci-files01-hki.intra.qt.io/input/windows/opengl32sw-32-mesa_$version.7z"
+$mesaOpenglUrl_32_alt = "http://download.qt.io/development_releases/prebuilt/llvmpipe/windows/opengl32sw-32-mesa_$version.7z"
 
 function Extract-Mesa
 {
     Param (
-        [string]$downloadUrl,
+        [string]$downloadUrlCache,
+        [string]$downloadUrlAlt,
         [string]$sha1,
         [string]$targetFolder
     )
-    Write-Host "Installing Mesa from $downloadUrl to $targetFolder"
-    $localArchivePath = "C:\Windows\temp\opengl32sw.7z"
-    Invoke-WebRequest -UseBasicParsing $downloadUrl -OutFile $localArchivePath
-    Verify-Checksum $localArchivePath $sha1
-    Get-ChildItem $package | % {& "C:\Utils\sevenzip\7z.exe" "x" "-y" $_.fullname "-o$targetFolder"}
-    Remove-Item $localArchivePath
+    Download $downloadUrlAlt $downloadUrlCache $package
+    Verify-Checksum $package $sha1
+    Extract-7Zip $package $targetFolder
+    Write-Host "Removing $package"
+    Remove-Item -Path $package
 }
 
-if ( Test-Path C:\Windows\SysWOW64 ) {
-    Extract-Mesa $mesaOpenglUrl_64 $mesaOpenglSha1_64 "C:\Windows\System32"
-    Extract-Mesa $mesaOpenglUrl_32 $mesaOpenglSha1_32 "C:\Windows\SysWOW64"
+if (Is64BitWinHost) {
+    Extract-Mesa $mesaOpenglUrl_64_cache $mesaOpenglUrl_64_alt $mesaOpenglSha1_64 "C:\Windows\System32"
+    Extract-Mesa $mesaOpenglUrl_32_cache $mesaOpenglUrl_32_alt $mesaOpenglSha1_32 "C:\Windows\SysWOW64"
 } else {
-    Extract-Mesa $mesaOpenglUrl_32 $mesaOpenglSha1_32 "C:\Windows\system32"
+    Extract-Mesa $mesaOpenglUrl_32_cache $mesaOpenglUrl_32_alt $mesaOpenglSha1_32 "C:\Windows\system32"
 }
 
+Write-Output "Mesa llvmpipe = $version" >> ~/versions.txt

coin/provisioning/common/windows/mqtt_broker.ps1

@@ -33,18 +33,19 @@
 
 . "$PSScriptRoot\helpers.ps1"
 
-echo "MQTT: Downloading Paho test broker..."
-$zip = "c:\users\qt\downloads\pahotest.zip"
-$externalUrl = "http://ci-files01-hki.ci.local/input/mqtt_broker/paho.mqtt.testing-c342c09dadc7a664d0a8befad1ca031f5a0b0bc0.zip"
-$internalUrl = "https://github.com/eclipse/paho.mqtt.testing/archive/c342c09dadc7a664d0a8befad1ca031f5a0b0bc0.zip"
-$sha1 = "532fe145096cdd8d679f425cbfd883289150c968"
+Write-Host "MQTT: Downloading Paho test broker..."
+$zip = Get-DownloadLocation "pahotest.zip"
+$commitSHA = "5e14a65bbf602fe5d58afdd1394ce76d41ed5c65"
+$sha1 = "6afc375c2702eb36a960f38dd4912a3422d679fd"
+
+$internalUrl = "http://ci-files01-hki.ci.local/input/mqtt_broker/paho.mqtt.testing-$commitSHA.zip"
+$externalUrl = "https://github.com/eclipse/paho.mqtt.testing/archive/$commitSHA.zip"
 
 Download $externalUrl $internalUrl $zip
 Verify-Checksum $zip $sha1
 
-echo "MQTT: Installing $zip..."
-Extract-Zip $zip C:\Utils
-Remove-Item $zip
+Write-Host "MQTT: Installing $zip..."
+Extract-7Zip $zip C:\Utils
+Remove-Item -Path $zip
 
-echo "MQTT: Updating environment..."
-[Environment]::SetEnvironmentVariable("MQTT_TEST_BROKER_LOCATION", "C:\Utils\paho.mqtt.testing-c342c09dadc7a664d0a8befad1ca031f5a0b0bc0\interoperability\startbroker.py", "Machine")
+Set-EnvironmentVariable "MQTT_TEST_BROKER_LOCATION" "C:\Utils\paho.mqtt.testing-$commitSHA\interoperability\startbroker.py"

coin/provisioning/common/windows/msvc-2013-update5.ps1

@@ -0,0 +1,50 @@
+#############################################################################
+##
+## Copyright (C) 2017 The Qt Company Ltd.
+## Contact: http://www.qt.io/licensing/
+##
+## This file is part of the provisioning scripts of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL21$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and The Qt Company. For licensing terms
+## and conditions see http://www.qt.io/terms-conditions. For further
+## information use the contact form at http://www.qt.io/contact-us.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 or version 3 as published by the Free
+## Software Foundation and appearing in the file LICENSE.LGPLv21 and
+## LICENSE.LGPLv3 included in the packaging of this file. Please review the
+## following information to ensure the GNU Lesser General Public License
+## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## As a special exception, The Qt Company gives you certain additional
+## rights. These rights are described in The Qt Company LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
+. "$PSScriptRoot\helpers.ps1"
+
+# Install Visual Studio 2013 update 5
+
+$version = "2013 Update 5 (KB2829760)"
+$package = "C:\Windows\Temp\vs12-kb2829760.exe"
+$url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\VS2013.5.exe"
+
+Write-Host "Fetching patch for Visual Studio $version..."
+Copy-Item $url_cache $package
+
+Write-Host "Installing Update 5 for Visual Studio $version..."
+Run-Executable "$package" "/norestart /passive"
+
+Write-Host "Removing $package ..."
+Remove-Item $package
+
+Write-Output "Visual Studio = $version" >> ~\versions.txt

coin/provisioning/common/windows/msvc_2015_update3_patch.ps1

@@ -36,25 +36,32 @@
 # Original download page: https://msdn.microsoft.com/en-us/library/mt752379.aspx
 
 $version = "2015 update3 (KB3165756)"
-$package = "C:\Windows\Temp\vs14-kb3165756.exe"
+$packagePath = "C:\Windows\Temp"
+$package = $packagePath + "\vs14-kb3165756.exe"
 $url_cache = "http://ci-files01-hki.intra.qt.io/input/windows/vs14-kb3165756.exe"
 $url_official = "http://go.microsoft.com/fwlink/?LinkID=816878"
 $sha1 = "6a21d9b291ca75d44baad95e278fdc0d05d84c02"
-$preparedPackage="\\ci-files01-hki.intra.qt.io\provisioning\windows\vs14-kb3165756-update"
+$preparedPackage = "\\ci-files01-hki.intra.qt.io\provisioning\windows\vs14-kb3165756-update"
 
 if (Test-Path $preparedPackage) {
-    echo "Using prepared package"
-    pushd $preparedPackage
-    $commandLine = "$preparedPackage\vs14-kb3165756.exe"
+    # The prepared package contains updated packages so that not everything has to be downloaded
+    Write-Host "Using prepared package"
+    Copy-Item -Recurse $preparedPackage $packagePath
+    # Remove the whole downloaded folder
+    $toRemove = $packagePath + "\vs14-kb3165756-update"
+    $executable = "$toRemove\vs14-kb3165756.exe"
 } else {
-    echo "Fetching patch for Visual Studio $version..."
+    Write-Host "Fetching patch for Visual Studio $version..."
     Download $url_official $url_cache $package
-    Verify-Checksum $package $sha1
-    $commandLine = $package
+    $executable = $package
+    # Remove the downloaded executable
+    $toRemove = $executable
 }
-echo "Installing patch for Visual Studio $version..."
-. $commandLine /norestart /passive
 
-if ($commandLine.StartsWith("C:\Windows")) {
-    remove-item $package
-}
+Verify-Checksum $executable $sha1
+Write-Host "Installing patch for Visual Studio $version..."
+Run-Executable $executable "/norestart /passive"
+
+Remove-Item -Force -Recurse -Path $toRemove
+
+Write-Output "Visual Studio = $version" >> ~\versions.txt

coin/provisioning/common/windows/mysql.ps1

@@ -37,8 +37,11 @@
 # Both x86 and x64 versions needed when x86 integrations are done on x64 machine
 
 $version = "5.6.11"
-$packagex64 = "C:\Windows\temp\mysql-$version-winx64.zip"
-$packagex86 = "C:\Windows\temp\mysql-$version-win32.zip"
+$baseNameX64 = "mysql-$version-winx64"
+$packagex64 = "C:\Windows\temp\$baseNameX64.zip"
+$baseNameX86 = "mysql-$version-win32"
+$packagex86 = "C:\Windows\temp\$baseNameX86.zip"
+$installFolder = "C:\Utils\my_sql"
 
 function DownloadAndInstall
 {
@@ -48,43 +51,33 @@ function DownloadAndInstall
         [string]$installPath
     )
 
-    echo "Fetching from URL ..."
+    Write-Host "Fetching from URL ..."
     Copy-Item $internalUrl $package
 
     $zipDir = [io.path]::GetFileNameWithoutExtension($package)
-    Extract-Dev-Folders-From-Zip $package $zipDir $installPath
+    Extract-7Zip $package $installPath "$zipDir\lib $zipDir\bin $zipDir\share $zipDir\include"
 
-    Remove-Item $package
+    Remove-Item -Path $package
 }
 
-if( (is64bitWinHost) -eq 1 ) {
+if (Is64BitWinHost) {
     # Install x64 bit version
     $architecture = "x64"
-    $installFolder = "C:\Utils\my_sql\my_sql"
     $internalUrl = "\\ci-files01-hki.intra.qt.io\provisioning\windows\mysql-$version-winx64.zip"
 
     DownloadAndInstall $internalUrl $packagex64 $installFolder
 
-    echo "Set environment variables ..."
-    [Environment]::SetEnvironmentVariable("MYSQL_INCLUDE_x64", "$installFolder\include", "Machine")
-    [Environment]::SetEnvironmentVariable("MYSQL_LIB_x64", "$installFolder\lib", "Machine")
+    Set-EnvironmentVariable "MYSQL_INCLUDE_x64" "$installFolder\$baseNameX64\include"
+    Set-EnvironmentVariable "MYSQL_LIB_x64" "$installFolder\$baseNameX64\lib"
 }
 
 # Install x86 bit version
 $architecture = "x86"
 $internalUrl = "\\ci-files01-hki.intra.qt.io\provisioning\windows\mysql-$version-win32.zip"
-if( (is64bitWinHost) -eq 1 ) {
-    $installFolder = "C:\Utils\my_sql\my_sql$architecture"
-}
-else {
-    $installFolder = "C:\Utils\my_sql\my_sql"
-}
-
 DownloadAndInstall $internalUrl $packagex86 $installFolder
 
-echo "Set environment variables ..."
-[Environment]::SetEnvironmentVariable("MYSQL_INCLUDE_x86", "$installFolder\include", "Machine")
-[Environment]::SetEnvironmentVariable("MYSQL_LIB_x86", "$installFolder\lib", "Machine")
+Set-EnvironmentVariable "MYSQL_INCLUDE_x86" "$installFolder\$baseNameX86\include"
+Set-EnvironmentVariable "MYSQL_LIB_x86" "$installFolder\$baseNameX86\lib"
 
 # Store version information to ~/versions.txt, which is used to print version information to provision log.
-echo "MySQL = $version" >> ~/versions.txt
+Write-Output "MySQL = $version" >> ~/versions.txt

coin/provisioning/common/windows/ninja.ps1

@@ -1,11 +1,13 @@
 . "$PSScriptRoot\helpers.ps1"
 
-$zip = "c:\users\qt\downloads\ninja-1.6.0-win-x86.zip"
+$zip = Get-DownloadLocation "ninja-1.6.0-win-x86.zip"
 
 Download https://github.com/ninja-build/ninja/releases/download/v1.6.0/ninja-win.zip \\ci-files01-hki.intra.qt.io\provisioning\ninja\ninja-1.6.0-win-x86.zip $zip
 Verify-Checksum $zip "E01093F6533818425F8EFB0843CED7DCAABEA3B2"
 
-Extract-Zip $zip C:\Utils\Ninja
-Remove-Item $zip
+Extract-7Zip $zip C:\Utils\Ninja
+Remove-Item -Path $zip
 
 Add-Path "C:\Utils\Ninja"
+
+Write-Output "Ninja = 1.6.0" >> ~/versions.txt

coin/provisioning/common/windows/openssl.ps1

@@ -36,38 +36,37 @@
 # This script installs OpenSSL $version.
 # Both x86 and x64 versions needed when x86 integrations are done on x64 machine
 
-$version = "1_0_2j"
+$version = "1_0_2o"
 $packagex64 = "C:\Windows\Temp\Win64OpenSSL-$version.exe"
 $packagex86 = "C:\Windows\Temp\Win32OpenSSL-$version.exe"
 
-if( (is64bitWinHost) -eq 1 ) {
+if (Is64BitWinHost) {
 
     # Install x64 bit version
     $architecture = "x64"
     $installFolder = "C:\openssl"
     $externalUrl = "https://slproweb.com/download/Win64OpenSSL-$version.exe"
     $internalUrl = "\\ci-files01-hki.intra.qt.io\provisioning\openssl\Win64OpenSSL-$version.exe"
-    $sha1 = "b1660dbdcc77e1b3d81d780c7167be1c75384d44"
+    $sha1 = "86c71a28eda53fa406b957dd37491d616344b464"
 
-    echo "Fetching from URL ..."
+    Write-Host "Fetching from URL ..."
     Download $externalUrl $internalUrl $packagex64
     Verify-Checksum $packagex64 $sha1
-    echo "Installing $packagex64 ..."
-    cmd /c "$packagex64 /SP- /SILENT /LOG /SUPPRESSMSGBOXES /NORESTART /DIR=$installFolder"
+    Write-Host "Installing $packagex64 ..."
+    Run-Executable "$packagex64" "/SP- /SILENT /LOG /SUPPRESSMSGBOXES /NORESTART /DIR=$installFolder"
 
-    echo "Remove downloaded $packagex64 ..."
-    Remove-Item $packagex64
+    Write-Host "Remove downloaded $packagex64 ..."
+    Remove-Item -Path $packagex64
 
-    echo "Set $architecture environment variables ..."
-    [Environment]::SetEnvironmentVariable("OPENSSL_CONF_x64", "$installFolder\bin\openssl.cfg", "Machine")
-    [Environment]::SetEnvironmentVariable("OPENSSL_INCLUDE_x64", "$installFolder\include", "Machine")
-    [Environment]::SetEnvironmentVariable("OPENSSL_LIB_x64", "$installFolder\lib", "Machine")
+    Set-EnvironmentVariable "OPENSSL_CONF_x64" "$installFolder\bin\openssl.cfg"
+    Set-EnvironmentVariable "OPENSSL_INCLUDE_x64" "$installFolder\include"
+    Set-EnvironmentVariable "OPENSSL_LIB_x64" "$installFolder\lib"
 }
 
 # Install x86 bit version
 $architecture = "x86"
 
-if( (is64bitWinHost) -eq 1 ) {
+if (Is64BitWinHost) {
     $installFolder = "C:\openssl$architecture"
 } else {
     $installFolder = "C:\openssl"
@@ -75,21 +74,20 @@ if( (is64bitWinHost) -eq 1 ) {
 
 $externalUrl = "https://slproweb.com/download/Win32OpenSSL-$version.exe"
 $internalUrl = "\\ci-files01-hki.intra.qt.io\provisioning\openssl\Win32OpenSSL-$version.exe"
-$sha1 = "29b31d20545214ab4e4c57afb20be2338c317cc3"
+$sha1 = "bfc14fc03bd1d4dd03bf5459f62969d6b0ee96fe"
 
-echo "Fetching from URL ..."
+Write-Host "Fetching from URL ..."
 Download $externalUrl $internalUrl $packagex86
 Verify-Checksum $packagex86 $sha1
-echo "Installing $packagex86 ..."
-cmd /c "$packagex86 /SP- /SILENT /LOG /SUPPRESSMSGBOXES /NORESTART /DIR=$installFolder"
+Write-Host "Installing $packagex86 ..."
+Run-Executable "$packagex86" "/SP- /SILENT /LOG /SUPPRESSMSGBOXES /NORESTART /DIR=$installFolder"
 
-echo "Remove downloaded $packagex86 ..."
-Remove-Item $packagex86
+Write-Host "Remove downloaded $packagex86 ..."
+Remove-Item -Path $packagex86
 
-echo "Set $architecture environment variables ..."
-[Environment]::SetEnvironmentVariable("OPENSSL_CONF_x86", "$installFolder\bin\openssl.cfg", "Machine")
-[Environment]::SetEnvironmentVariable("OPENSSL_INCLUDE_x86", "$installFolder\include", "Machine")
-[Environment]::SetEnvironmentVariable("OPENSSL_LIB_x86", "$installFolder\lib", "Machine")
+Set-EnvironmentVariable "OPENSSL_CONF_x86" "$installFolder\bin\openssl.cfg"
+Set-EnvironmentVariable "OPENSSL_INCLUDE_x86" "$installFolder\include"
+Set-EnvironmentVariable "OPENSSL_LIB_x86" "$installFolder\lib"
 
 # Store version information to ~/versions.txt, which is used to print version information to provision log.
-echo "OpenSSL = $version" >> ~/versions.txt
+Write-Output "OpenSSL = $version" >> ~/versions.txt

coin/provisioning/common/windows/postgresql.ps1

@@ -40,26 +40,25 @@ $version = "9.1.9-1"
 $packagex64 = "C:\Windows\temp\postgresql-$version-windows-x64-binaries.zip"
 $packagex86 = "C:\Windows\temp\postgresql-$version-windows-binaries.zip"
 
-if( (is64bitWinHost) -eq 1 ) {
+if (Is64BitWinHost) {
     # Install x64 bit versions
     $architecture = "x64"
-    $installFolder = "C:\Utils\postgresql\pgsql"
+    $installFolder = "C:\Utils\postgresql"
     $externalUrl = "http://get.enterprisedb.com/postgresql/postgresql-$version-windows-x64-binaries.zip"
     $internalUrl = "\\ci-files01-hki.intra.qt.io\provisioning\windows\postgresql-$version-windows-x64-binaries.zip"
     $sha1 = "4da0453cdfda335e064d4437cf5bb9d356054cfd"
 
-    echo "Fetching from URL ..."
+    Write-Host "Fetching from URL ..."
     Download $externalUrl $internalUrl $packagex64
     Verify-Checksum $packagex64 $sha1
-    echo "Installing $packagex64 ..."
-    Extract-Dev-Folders-From-Zip $packagex64 "pgsql" $installFolder
+    Write-Host "Installing $packagex64 ..."
+    Extract-7Zip $packagex64 $installFolder "pgsql\lib pgsql\bin pgsql\share pgsql\include"
 
-    echo "Remove downloaded $packagex64 ..."
-    Remove-Item $packagex64
+    Write-Host "Remove downloaded $packagex64 ..."
+    Remove-Item -Path $packagex64
 
-    echo "Set $architecture environment variables ..."
-    [Environment]::SetEnvironmentVariable("POSTGRESQL_INCLUDE_x64", "$installFolder\include", "Machine")
-    [Environment]::SetEnvironmentVariable("POSTGRESQL_LIB_x64", "$installFolder\lib", "Machine")
+    Set-EnvironmentVariable "POSTGRESQL_INCLUDE_x64" "$installFolder\pgsql\include"
+    Set-EnvironmentVariable "POSTGRESQL_LIB_x64" "$installFolder\pgsql\lib"
 }
 
 # Install x86 bit version
@@ -67,26 +66,24 @@ $architecture = "x86"
 $externalUrl = "http://get.enterprisedb.com/postgresql/postgresql-$version-windows-binaries.zip"
 $internalUrl = "\\ci-files01-hki.intra.qt.io\provisioning\windows\postgresql-$version-windows-binaries.zip"
 $sha1 = "eb4f01845e1592800edbb74f60944b6c0aca51a9"
-if( (is64bitWinHost) -eq 1 ) {
-    $installFolder = "C:\Utils\postgresql$architecture\pgsql"
-}
-else {
-    $installFolder = "C:\Utils\postgresql\pgsql"
+if (Is64BitWinHost) {
+    $installFolder = "C:\Utils\postgresql$architecture"
+} else {
+    $installFolder = "C:\Utils\postgresql"
 }
 
 
-echo "Fetching from URL..."
+Write-Host "Fetching from URL..."
 Download $externalUrl $internalUrl $packagex86
 Verify-Checksum $packagex86 $sha1
-echo "Installing $packagex86 ..."
-Extract-Dev-Folders-From-Zip $packagex86 "pgsql" $installFolder
+Write-Host "Installing $packagex86 ..."
+Extract-7Zip $packagex86 $installFolder "pgsql\lib pgsql\bin pgsql\share pgsql\include"
 
-echo "Remove downloaded $packagex86 ..."
-Remove-Item $packagex86
+Write-Host "Remove downloaded $packagex86 ..."
+Remove-Item -Path $packagex86
 
-echo "Set $architecture environment variables ..."
-[Environment]::SetEnvironmentVariable("POSTGRESQL_INCLUDE_x86", "$installFolder\include", "Machine")
-[Environment]::SetEnvironmentVariable("POSTGRESQL_LIB_x86", "$installFolder\lib", "Machine")
+Set-EnvironmentVariable "POSTGRESQL_INCLUDE_x86" "$installFolder\pgsql\include"
+Set-EnvironmentVariable "POSTGRESQL_LIB_x86" "$installFolder\pgsql\lib"
 
 # Store version information to ~/versions.txt, which is used to print version information to provision log.
-echo "PostgreSQL = $version" >> ~/versions.txt
+Write-Output "PostgreSQL = $version" >> ~/versions.txt

coin/provisioning/common/windows/python.ps1

@@ -30,17 +30,20 @@
 ## $QT_END_LICENSE$
 ##
 #############################################################################
-. "$PSScriptRoot\helpers.ps1"
 
 # This script installs Python $version.
 # Python is required for building Qt 5 from source.
+param(
+    [Int32]$archVer=32,
+    [string]$targetDir="C:\Python27"
+)
+. "$PSScriptRoot\helpers.ps1"
 
 $version = "2.7.13"
-if( (is64bitWinHost) -eq 1 ) {
+if ( $archVer -eq 64 ) {
     $arch = ".amd64"
     $sha1 = "d9113142bae8829365c595735e1ad1f9f5e2894c"
-}
-else {
+} else {
     $arch = ""
     $sha1 = "7e3b54236dbdbea8fe2458db501176578a4d59c0"
 }
@@ -48,19 +51,36 @@ $package = "C:\Windows\temp\python-$version.msi"
 $externalUrl = "https://www.python.org/ftp/python/$version/python-$version" + $arch + ".msi"
 $internalUrl = "\\ci-files01-hki.intra.qt.io\provisioning\windows\python-$version" + $arch + ".msi"
 
-echo "Fetching from URL..."
+Write-Host "Fetching from URL..."
 Download $externalUrl $internalUrl $package
 Verify-Checksum $package $sha1
-echo "Installing $package..."
-cmd /c "msiexec /passive /i $package ALLUSERS=1"
+Write-Host "Installing $package..."
+Run-Executable "msiexec" "/passive /i $package TARGETDIR=$targetDir ALLUSERS=1"
+
 # We need to change allowZip64 from 'False' to 'True' to be able to create ZIP files that use the ZIP64 extensions when the zipfile is larger than 2 GB
-echo "Chancing allowZip64 value to 'True'..."
-(Get-Content C:\Python27\lib\zipfile.py) | ForEach-Object { $_ -replace "allowZip64=False", "allowZip64=True" } | Set-Content C:\Python27\lib\zipfile.py
-echo "Remove $package..."
-del $package
+Write-Host "Changing allowZip64 value to 'True'..."
+(Get-Content $targetDir\lib\zipfile.py) | ForEach-Object { $_ -replace "allowZip64=False", "allowZip64=True" } | Set-Content $targetDir\lib\zipfile.py
+Write-Host "Remove $package..."
+Remove-Item -Path $package
 
-Add-Path "C:\Python27;C:\Python27\Scripts"
+# When installing 32 bit python to 64 bit host, we want to keep only default python in path
+# For cross-compilation we export some helper env variable
+if (($archVer -eq 32) -And (Is64BitWinHost)) {
+    Set-EnvironmentVariable "PYTHON2_32_PATH" "$targetDir"
+    Set-EnvironmentVariable "PIP2_32_PATH" "$targetDir\Scripts"
+} else {
+    Add-Path "$targetDir;$targetDir\Scripts"
+}
+
+
+Run-Executable "$targetDir\python.exe" "-m ensurepip"
 
-C:\Python27\python.exe -m ensurepip
 # Install python virtual env
-C:\Python27\Scripts\pip.exe install virtualenv
+if (IsProxyEnabled) {
+    $proxy = Get-Proxy
+    Write-Host "Using proxy ($proxy) with pip"
+    $pip_args = "--proxy=$proxy"
+}
+Run-Executable "$targetDir\Scripts\pip.exe" "$pip_args install virtualenv"
+
+Write-Output "Python-$archVer = $version" >> ~/versions.txt

coin/provisioning/common/windows/python3.ps1

@@ -32,39 +32,54 @@
 ##
 #############################################################################
 
-param([Int32]$archVer=32)
-. "$PSScriptRoot\helpers.ps1"
-
 # This script installs Python $version.
 # Python3 is required for building some qt modules.
+param(
+    [Int32]$archVer=32,
+    [string]$install_path = "C:\Python36"
+)
+. "$PSScriptRoot\helpers.ps1"
 
 $version = "3.6.1"
 $package = "C:\Windows\temp\python-$version.exe"
-$install_path = "C:\Python36"
 
 # check bit version
 if ( $archVer -eq 64 ) {
-    echo "Running in 64 bit system"
+    Write-Host "Installing 64 bit Python"
     $externalUrl = "https://www.python.org/ftp/python/$version/python-$version-amd64.exe"
     $internalUrl = "http://ci-files01-hki.intra.qt.io/input/windows/python-$version-amd64.exe"
     $sha1 = "bf54252c4065b20f4a111cc39cf5215fb1edccff"
-}
-else {
+} else {
     $externalUrl = "https://www.python.org/ftp/python/$version/python-$version.exe"
     $internalUrl = "http://ci-files01-hki.intra.qt.io/input/windows/python-$version.exe"
     $sha1 = "76c50b747237a0974126dd8b32ea036dd77b2ad1"
 }
 
-echo "Fetching from URL..."
+Write-Host "Fetching from URL..."
 Download $externalUrl $internalUrl $package
 Verify-Checksum $package $sha1
-echo "Installing $package..."
-cmd /c "$package /q TargetDir=$install_path"
-echo "Remove $package..."
-del $package
+Write-Host "Installing $package..."
+Run-Executable "$package" "/q TargetDir=$install_path"
+Write-Host "Remove $package..."
+Remove-Item -Path $package
+
+# For cross-compilation we export some helper env variable
+if (($archVer -eq 32) -And (Is64BitWinHost)) {
+    Set-EnvironmentVariable "PYTHON3_32_PATH" "$install_path"
+    Set-EnvironmentVariable "PIP3_32_PATH" "$install_path\Scripts"
+} else {
+    Set-EnvironmentVariable "PYTHON3_PATH" "$install_path"
+    Set-EnvironmentVariable "PIP3_PATH" "$install_path\Scripts"
+}
 
-[Environment]::SetEnvironmentVariable("PYTHON3_PATH", "$install_path", [EnvironmentVariableTarget]::Machine)
-[Environment]::SetEnvironmentVariable("PIP3_PATH", "$install_path\Scripts", [EnvironmentVariableTarget]::Machine)
 
 # Install python virtual env
-cmd /c "$install_path\Scripts\pip3.exe install virtualenv"
+if (IsProxyEnabled) {
+    $proxy = Get-Proxy
+    Write-Host "Using proxy ($proxy) with pip"
+    $pip_args = "--proxy=$proxy"
+}
+Run-Executable "$install_path\Scripts\pip3.exe" "$pip_args install virtualenv"
+
+Write-Output "Python3-$archVer = $version" >> ~/versions.txt
+

coin/provisioning/common/windows/set-proxy.ps1

@@ -0,0 +1,61 @@
+#############################################################################
+##
+## Copyright (C) 2017 The Qt Company Ltd.
+## Contact: http://www.qt.io/licensing/
+##
+## This file is part of the provisioning scripts of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL21$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and The Qt Company. For licensing terms
+## and conditions see http://www.qt.io/terms-conditions. For further
+## information use the contact form at http://www.qt.io/contact-us.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 or version 3 as published by the Free
+## Software Foundation and appearing in the file LICENSE.LGPLv21 and
+## LICENSE.LGPLv3 included in the packaging of this file. Please review the
+## following information to ensure the GNU Lesser General Public License
+## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## As a special exception, The Qt Company gives you certain additional
+## rights. These rights are described in The Qt Company LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
+
+$n = Get-Content "$PSScriptRoot\..\shared\http_proxy.txt"
+$n = $n.Split('=')
+New-Variable -Name $n[0] -Value $n[1]
+
+if ([string]::IsNullOrEmpty($proxy)) {
+    Write-Host "No proxy is defined."
+} else {
+    Write-Host "Checking proxy @ $proxy"
+    $proxy = $proxy -replace '"', ""
+    $webclient = New-Object System.Net.WebClient
+    $proxy_obj = New-Object System.Net.WebProxy($proxy)
+    $webclient.proxy = $proxy_obj
+    try {
+        $webpage = $webclient.DownloadData("http://proxy.intra.qt.io")
+    } catch {
+        $ErrorMessage = $_.Exception.Message
+        $FailedItem = $_.Exception.ItemName
+        $iserror = $true
+    }
+    if ($iserror -eq $true) {
+        Write-Host "Testing download with proxy does not work: $ErrorMessage, $FailedItem. Not setting proxy."
+    } else {
+        Write-Host "Setting proxy to: $proxy"
+        Set-ItemProperty -Path "HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings" -Name ProxyServer -Value "$proxy"
+        Set-ItemProperty -Path "HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings" -Name ProxyEnable -Value 1
+        Set-ItemProperty -Path "HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings" -Name ProxyOverride -Value 10.215
+    }
+}

coin/provisioning/common/windows/squishInstall.ps1

@@ -1,6 +1,6 @@
 #############################################################################
 ##
-## Copyright (C) 2017 The Qt Company Ltd.
+## Copyright (C) 2018 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
 ## This file is part of the provisioning scripts of the Qt Toolkit.
@@ -33,131 +33,117 @@
 
 . "$PSScriptRoot\helpers.ps1"
 
-
 # This script will install squish package for Windows.
 # Squish is need by Release Test Automation (RTA)
+# NOTE! Make sure 64bit versions are always installed before 32bit,
+# because they use same folder name before a rename
 
 $version = "6.3.0"
+
 # Qt branch without dot (*.*)
 $qtBranch = "59x"
+# So far Squish built with Qt5.9 works also with 5.10 and 5.11, but we have to be prepared that on some point
+# the compatibility breaks, and we may need to have separate Squish packages for different Qt versions.
+
 $targetDir = "C:\Utils\squish"
 $squishUrl = "\\ci-files01-hki.intra.qt.io\provisioning\squish\coin"
 $squishBranchUrl = "$squishUrl\$qtBranch"
+$testSuite = "suite_test_squish"
+$testSuiteUrl = "\\ci-files01-hki.intra.qt.io\provisioning\squish\coin\$testSuite.7z"
 
 # Squish license
 $licensePackage = ".squish-3-license"
 
 $OSVersion = (get-itemproperty -Path "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion" -Name ProductName).ProductName
 
-# This can be removed when using vanilla os
-if((Test-Path -Path "$targetDir" )){
-    try {
-        echo "Renaming old Squish"
-        echo "Rename-Item -ErrorAction 'Stop' $targetDir $targetDir_deleted"
-        Rename-Item -ErrorAction 'Stop' "$targetDir" squish_deleted
-    } catch {}
-}
-
 Function DownloadAndInstallSquish {
-
     Param (
         [string]$version,
-        [string]$squishBranchUrl,
-        [string]$qtBranch,
         [string]$bit,
-        [string]$targetDir,
         [string]$squishPackage
     )
 
     $SquishUrl = $squishBranchUrl + "\squish-" + $version + "-qt" + $qtBranch + "-" + $bit + "-" + $squishPackage + ".exe"
     $SquishInstaller = "$targetDir\$squishPackage.exe"
     $SquishParameters = "unattended=1 targetdir=$targetDir\$squishPackage"
-    $Command = "$SquishInstaller $SquishParameters"
 
-    echo "Fetching from URL ..."
+    Write-Host "Fetching from URL $squishUrl"
     Copy-Item "$SquishUrl" "$SquishInstaller"
-    echo "Installing Squish"
-    Execute-Command $Command
-    remove-item $SquishInstaller
+    Write-Host "Installing Squish"
+    Run-Executable "$SquishInstaller" "$SquishParameters"
+    Remove-Item -Path $SquishInstaller
+    if ("$bit" -eq "win64") {
+        if ($squishPackage.StartsWith("mingw")) {
+            $squishPackage64bit = "mingw_64"
+        } else {
+            $squishPackage64bit = "$squishPackage`_64"
+        }
+        Rename-Item $targetDir\$squishPackage $targetDir\$squishPackage64bit
+        TestSquish $squishPackage64bit
+    } else {
+        if ($squishPackage.StartsWith("mingw")) {
+            Rename-Item $targetDir\$squishPackage $targetDir\mingw
+            TestSquish mingw
+        } else {
+            TestSquish $squishPackage
+        }
+    }
 }
 
 Function DownloadSquishLicence {
-
     Param (
-        [string]$licensePackage,
-        [string]$squishUrl,
-        [string]$targetDir
+        [string]$squishUrl
     )
 
-    # This can be removed when using vanilla os
-    if ($Env:SQUISH_LICENSEKEY_DIR)
-    {
-        echo "Removing SQUISH_LICENSEKEY_DIR env variable"
-        Remove-Item Env:\SQUISH_LICENSEKEY_DIR
-    }
-
-    echo "Installing Squish license to home directory"
+    Write-Host "Installing Squish license to home directory"
     Copy-Item $squishUrl\$licensePackage ~\$licensePackage
 }
 
-echo "Creating $targetDir"
+Function TestSquish {
+    Param (
+        [string]$squishPackage
+    )
+
+    Write-Host "Verifying Squish Installation"
+    if (cmd /c "$targetDir\$squishPackage\bin\squishrunner.exe --testsuite $targetDir\$testSuite" |Select-String -Pattern "Squish test run successfully") {
+        Write-Host "Squish installation tested successfully!"
+    } else {
+        Write-Host "Squish test failed! $squishPackage wasn't installed correctly."
+        [Environment]::Exit(1)
+    }
+}
+
+Write-Host "Creating $targetDir"
 New-Item -ErrorAction Ignore -ItemType directory -Path "$targetDir"
 
-DownloadSquishLicence $licensePackage $squishUrl $targetDir
+Write-Host "Download and install Test Suite for squish"
+Copy-Item $testSuiteUrl $targetDir/$testSuite.7z
+Extract-7Zip $targetDir/$testSuite.7z $targetDir
 
-if(($OSVersion -eq "Windows 10 Enterprise") -or ($OSVersion -eq "Windows 8.1 Enterprise"))
-{
-    # Squish for Visual Studio 2015
-    $squishPackage = "msvc14"
-    $squishPackage64bit = "msvc14_64"
+DownloadSquishLicence $squishUrl
 
-    if(($env:PROCESSOR_ARCHITECTURE -eq "AMD64") -or ($env:PROCESSOR_ARCHITEW6432 -eq "AMD64"))
-    {
-        echo "Installing $squishPackage_64"
-        DownloadAndInstallSquish $version $squishBranchUrl $qtBranch win64 $targetDir $squishPackage
-        mv $targetDir\$squishPackage $targetDir\$squishPackage64bit
+if ($OSVersion -eq "Windows 10 Enterprise") {
+
+    if (Is64BitWinHost) {
+        DownloadAndInstallSquish $version win64 msvc14
     }
+    DownloadAndInstallSquish $version win32 "mingw_gcc53_posix_dwarf"
+    DownloadAndInstallSquish $version win32 "msvc14"
 
-    echo "Installing $squishPackage"
-    DownloadAndInstallSquish $version $squishBranchUrl $qtBranch win32 $targetDir $squishPackage
-}
-if($OSVersion -eq "Windows 8.1 Enterprise")
-{
-    # Squish for Visual Studio 2013
-    $squishPackage64bit = "msvc12_64"
-
-    if(($env:PROCESSOR_ARCHITECTURE -eq "AMD64") -or ($env:PROCESSOR_ARCHITEW6432 -eq "AMD64"))
-    {
-        echo "Installing $squishPackage_64"
-        DownloadAndInstallSquish $version $squishBranchUrl $qtBranch win64 $targetDir $squishPackage
-        mv $targetDir\$squishPackage $targetDir\$squishPackage64bit
-    }
-    else
-    {
-        echo "Change secret file to normal one"
-        attrib -h C:\Users\qt\.squish-3-license
-    }
-}
-else
-{
-    # Windows 7
-
-    # Squish for MinGW
-    $squishPackageMingw = "mingw_gcc53_posix_dwarf"
-    echo "Installing $squishPackageMingw"
-    DownloadAndInstallSquish $version $squishBranchUrl $qtBranch win32 $targetDir $squishPackageMingw
-    mv $targetDir\$squishPackageMingw $targetDir\mingw
-
-    # Squish for Visual Studio 2015
-    $squishPackage = "msvc14"
-    $squishPackage64bit = "msvc14_64"
-
-    if(($env:PROCESSOR_ARCHITECTURE -eq "AMD64") -or ($env:PROCESSOR_ARCHITEW6432 -eq "AMD64"))
-    {
-        echo "Installing $squishPackage64bit"
-        DownloadAndInstallSquish $version $squishBranchUrl $qtBranch win64 $targetDir $squishPackage
-        mv $targetDir\$squishPackage $targetDir\$squishPackage64bit
-    }
-
-
+} elseif ($OSVersion -eq "Windows 8.1 Enterprise") {
+
+    if (Is64BitWinHost) {
+        DownloadAndInstallSquish $version win64 "msvc12"
+        DownloadAndInstallSquish $version win64 "msvc14"
+    }
+    DownloadAndInstallSquish $version win32 "msvc14"
+
+} elseif ($OSVersion -eq "Windows 7 Enterprise") {
+
+    if (Is64BitWinHost) {
+        DownloadAndInstallSquish $version win64 "msvc12"
+        DownloadAndInstallSquish $version win64 "msvc14"
+    }
+    DownloadAndInstallSquish $version win32 "mingw_gcc53_posix_dwarf"
+    DownloadAndInstallSquish $version win32 "msvc14"
 }

coin/provisioning/common/windows/unset-proxy.ps1

@@ -0,0 +1,43 @@
+#############################################################################
+##
+## Copyright (C) 2017 The Qt Company Ltd.
+## Contact: http://www.qt.io/licensing/
+##
+## This file is part of the provisioning scripts of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL21$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and The Qt Company. For licensing terms
+## and conditions see http://www.qt.io/terms-conditions. For further
+## information use the contact form at http://www.qt.io/contact-us.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 or version 3 as published by the Free
+## Software Foundation and appearing in the file LICENSE.LGPLv21 and
+## LICENSE.LGPLv3 included in the packaging of this file. Please review the
+## following information to ensure the GNU Lesser General Public License
+## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## As a special exception, The Qt Company gives you certain additional
+## rights. These rights are described in The Qt Company LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
+
+Write-Host "Disabling proxy"
+# A bit-mask is needed to disable "Automatically detect settings" from LAN
+# settings that disturb and re-enable proxy even after disabling it.
+$dcs = (Get-ItemProperty -Path "HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections").DefaultConnectionSettings
+$dcs[8] = $_ -band 0xF7
+Set-ItemProperty -Path "HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections" -Name DefaultConnectionSettings -Value $dcs
+Set-ItemProperty -Path "HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings" -Name ProxyEnable -Value 0
+Remove-ItemProperty -Path "HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings" -Name ProxyServer
+Remove-ItemProperty -Path "HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings" -Name ProxyOverride
+

coin/provisioning/common/windows/vc_redist.ps1

@@ -32,21 +32,18 @@
 ##
 #############################################################################
 
-param([Int32]$archVer=32)
 . "$PSScriptRoot\helpers.ps1"
 
 # This script installs Visual C++ Redistributable for Visual Studio 2015
 # This is a dependency of the current python3 version
 
-# check bit version
-if ( $archVer -eq 64 ) {
-    echo "Running in 64 bit system"
+if (Is64BitWinHost) {
+    Write-Host "Running in 64 bit system"
     $arch = "x64"
     $externalUrl = "https://download.microsoft.com/download/9/3/F/93FCF1E7-E6A4-478B-96E7-D4B285925B00/vc_redist.x64.exe"
     $internalUrl = "http://ci-files01-hki.intra.qt.io/input/windows/vc_redist.x64.exe"
     $sha1 = "3155cb0f146b927fcc30647c1a904cd162548c8c"
-}
-else {
+} else {
     $arch = "x86"
     $externalUrl = "https://download.microsoft.com/download/9/3/F/93FCF1E7-E6A4-478B-96E7-D4B285925B00/vc_redist.x86.exe"
     $internalUrl = "http://ci-files01-hki.intra.qt.io/input/windows/vc_redist.x86.exe"
@@ -55,10 +52,10 @@ else {
 
 $package = "C:\Windows\temp\vc_redist.$arch.exe"
 
-echo "Fetching from URL..."
+Write-Host "Fetching from URL..."
 Download $externalUrl $internalUrl $package
 Verify-Checksum $package $sha1
-echo "Installing $package..."
-Start-Process -FilePath $package -ArgumentList "/q" -Wait
-echo "Remove $package..."
-del $package
+Write-Host "Installing $package..."
+Run-Executable $package "/q"
+Write-Host "Remove $package..."
+Remove-Item -Force -Path $package

coin/provisioning/common/windows/vulkansdk.ps1

@@ -40,9 +40,9 @@ $url_cache = "\\ci-files01-hki.ci.local\provisioning\windows\VulkanSDK-" +$versi
 $vulkanPackage = "C:\Windows\Temp\vulkan-installer-$version.exe"
 
 Copy-Item $url_cache $vulkanPackage
-cmd /c "$vulkanPackage /S"
+Run-Executable $vulkanPackage "/S"
 
-echo "Cleaning $vulkanPackage.."
-Remove-Item -Recurse -Force "$vulkanPackage"
+Write-Host "Cleaning $vulkanPackage.."
+Remove-Item -Recurse -Force -Path "$vulkanPackage"
 
-echo "Vulkan SDK = $version" >> ~\versions.txt
+Write-Output "Vulkan SDK = $version" >> ~\versions.txt

coin/provisioning/common/windows/win10-enable-devmode.ps1

@@ -0,0 +1,14 @@
+# Turning on developer mode.
+#
+# In order to run auto tests for UWP, we have to enable developer mode on Windows 10 machines.
+# https://docs.microsoft.com/en-us/windows/uwp/get-started/enable-your-device-for-development
+
+. "$PSScriptRoot\helpers.ps1"
+
+if (Is64BitWinHost) {
+    $bitness = "/reg:64"
+} else {
+    $bitness = "/reg:32"
+}
+
+Run-Executable "reg.exe" "ADD `"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\AppModelUnlock`" /V  AllowDevelopmentWithoutDevLicense /T REG_DWORD /D 1 /F $bitness"

coin/provisioning/common/windows/win10sdk.ps1

@@ -0,0 +1,50 @@
+############################################################################
+##
+## Copyright (C) 2018 The Qt Company Ltd.
+## Contact: http://www.qt.io/licensing/
+##
+## This file is part of the provisioning scripts of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL21$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and The Qt Company. For licensing terms
+## and conditions see http://www.qt.io/terms-conditions. For further
+## information use the contact form at http://www.qt.io/contact-us.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 or version 3 as published by the Free
+## Software Foundation and appearing in the file LICENSE.LGPLv21 and
+## LICENSE.LGPLv3 included in the packaging of this file. Please review the
+## following information to ensure the GNU Lesser General Public License
+## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## As a special exception, The Qt Company gives you certain additional
+## rights. These rights are described in The Qt Company LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
+
+. "$PSScriptRoot\helpers.ps1"
+
+# This script will install Windows 10 SDK
+
+$url_cache = "\\ci-files01-hki.ci.local\provisioning\windows\winsdksetup.exe"
+$url_official = "https://download.microsoft.com/download/8/C/3/8C37C5CE-C6B9-4CC8-8B5F-149A9C976035/windowssdk/winsdksetup.exe"
+$package = "C:\Windows\Temp\winsdksetup.exe"
+$sha1 = "db237323f1779fb143e7cdc558e4345e7004489e"
+
+Copy-Item $url_cache $package
+Verify-Checksum $package $sha1
+Run-Executable $package "/features + /q"
+
+Write-Host "Cleaning $package.."
+Remove-Item -Recurse -Force -Path "$package"
+
+Write-Output "Windows 10 SDK = 10.0.16229.91" >> ~\versions.txt

coin/provisioning/common/windows/winrtrunner.ps1

@@ -1,10 +1,12 @@
 . "$PSScriptRoot\helpers.ps1"
 
-$zip = "c:\users\qt\downloads\winrtrunner.zip"
+$zip = Get-DownloadLocation "winrtrunner.zip"
+$url = "http://download.qt.io/development_releases/prebuilt/winrtrunner/winrtrunner_2018-07-06.zip"
+$url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\winrtrunner\winrtrunner_2018-07-06.zip"
 
-Invoke-WebRequest -UseBasicParsing http://download.qt.io/development_releases/prebuilt/winrtrunner/winrtrunner.zip -OutFile $zip
-Verify-Checksum $zip "C19098A4C9DBD20EDEB4E5E0D3E6A5BBBCA73C42"
-Extract-Zip $zip C:\Utils\winrtrunner
-Remove-Item $zip
+Download $url $url_cache $zip
+Verify-Checksum $zip "93548e8c3fb8fded2474996ef5e0163f489ce8cf"
+Extract-7Zip $zip C:\Utils\winrtrunner
+Remove-Item -Path $zip
 
-[Environment]::SetEnvironmentVariable("CI_WINRTRUNNER_PATH", "C:\Utils\winrtrunner", "Machine")
+Set-EnvironmentVariable "CI_WINRTRUNNER_PATH" "C:\Utils\winrtrunner"

coin/provisioning/common/windows/wsearch-off.ps1

@@ -1,3 +1,4 @@
+. "$PSScriptRoot\helpers.ps1"
 
 # Disable the windows search indexing service
-sc.exe config WSearch start= disabled
+Run-Executable "sc.exe" "config WSearch start= disabled"

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/01-disable-mlocate.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env bash
+BASEDIR=$(dirname "$0")
+# shellcheck source=../common/linux/disable-mlocate.sh
+"$BASEDIR/../common/linux/disable-mlocate.sh"

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/01-systemsetup.sh

@@ -35,8 +35,10 @@
 
 set -ex
 
+# shellcheck source=../common/unix/check_and_set_proxy.sh
 source "${BASH_SOURCE%/*}/../common/unix/check_and_set_proxy.sh"
 
-if [ "$proxy" != "" ]; then
+# shellcheck disable=SC2031
+if [ "$http_proxy" != "" ]; then
     echo "proxy=$proxy" | sudo tee -a /etc/yum.conf
 fi

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/02-disable-ntp.sh

@@ -1,3 +1,4 @@
 #!/usr/bin/env bash
 
+# shellcheck source=../common/linux/disable-ntp_linux.sh
 source "${BASH_SOURCE%/*}/../common/linux/disable-ntp_linux.sh"

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/03-install-rhel-epel.sh

@@ -0,0 +1,49 @@
+#!/usr/bin/env bash
+
+#############################################################################
+##
+## Copyright (C) 2018 The Qt Company Ltd.
+## Contact: http://www.qt.io/licensing/
+##
+## This file is part of the provisioning scripts of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL21$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and The Qt Company. For licensing terms
+## and conditions see http://www.qt.io/terms-conditions. For further
+## information use the contact form at http://www.qt.io/contact-us.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 or version 3 as published by the Free
+## Software Foundation and appearing in the file LICENSE.LGPLv21 and
+## LICENSE.LGPLv3 included in the packaging of this file. Please review the
+## following information to ensure the GNU Lesser General Public License
+## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## As a special exception, The Qt Company gives you certain additional
+## rights. These rights are described in The Qt Company LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
+
+# shellcheck source=../common/unix/DownloadURL.sh
+source "${BASH_SOURCE%/*}/../common/unix/DownloadURL.sh"
+
+package="epel-release-6-8.noarch.rpm"
+primaryUrl="https://dl.fedoraproject.org/pub/epel/6/x86_64/Packages/e/$package"
+cacheUrl="http://ci-files01-hki.intra.qt.io/input/rhel6/$package"
+sha1="2b2767a5ae0de30b9c7b840f2e34f5dd9deaf19a"
+targetFile="/tmp/$package"
+
+DownloadURL "$primaryUrl" "$cacheUrl" "$sha1" "$targetFile"
+
+sudo rpm -ivh "$targetFile"
+rm "$targetFile"
+

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/08-libclang.sh

@@ -1,11 +1,39 @@
 #!/usr/bin/env bash
 
+#############################################################################
+##
+## Copyright (C) 2018 The Qt Company Ltd.
+## Contact: http://www.qt.io/licensing/
+##
+## This file is part of the test suite of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL21$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and The Qt Company. For licensing terms
+## and conditions see http://www.qt.io/terms-conditions. For further
+## information use the contact form at http://www.qt.io/contact-us.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 or version 3 as published by the Free
+## Software Foundation and appearing in the file LICENSE.LGPLv21 and
+## LICENSE.LGPLv3 included in the packaging of this file. Please review the
+## following information to ensure the GNU Lesser General Public License
+## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## As a special exception, The Qt Company gives you certain additional
+## rights. These rights are described in The Qt Company LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
 set -ex
 
 BASEDIR=$(dirname "$0")
-. $BASEDIR/../common/shared/sw_versions.txt
-VERSION=$libclang_version
-URL="https://download.qt.io/development_releases/prebuilt/libclang/libclang-release_${VERSION//\./}-linux-Rhel6.6-gcc4.9-x86_64.7z"
-SHA1="c7466109628418a6aa3db8b3f5825f847f1c4952"
-
-$BASEDIR/../common/unix/libclang.sh "$URL" "$SHA1" "$VERSION"
+# shellcheck source=../common/unix/libclang.sh
+"$BASEDIR/../common/unix/libclang.sh" "$URL" "$SHA1" "$VERSION"

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/08-pythondev.sh

@@ -7,11 +7,6 @@ set -ex
 
 sudo yum install -y python-devel python-virtualenv
 
-# install the EPEL repository which provides python3
-wget https://dl.fedoraproject.org/pub/epel/epel-release-latest-6.noarch.rpm
-sudo rpm -Uvh epel-release-latest-6.noarch.rpm
-sudo rm -f epel-release-latest-6.noarch.rpm
-
 # install python3
 sudo yum install -y python34-devel
 

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/09-cmake.sh

@@ -1,4 +1,4 @@
 #!/usr/bin/env bash
 set -ex
 
-$(dirname $0)/../common/linux/cmake_linux.sh
+"$(dirname "$0")/../common/linux/cmake_linux.sh"

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/22-mqtt_broker.sh

@@ -33,4 +33,5 @@
 ##
 #############################################################################
 
+# shellcheck source=../common/unix/mqtt_broker.sh
 source "${BASH_SOURCE%/*}/../common/unix/mqtt_broker.sh"

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/30-install_icu.sh

@@ -2,7 +2,7 @@
 
 #############################################################################
 ##
-## Copyright (C) 2016 The Qt Company Ltd.
+## Copyright (C) 2018 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
 ## This file is part of the test suite of the Qt Toolkit.
@@ -33,6 +33,9 @@
 ##
 #############################################################################
 
+# shellcheck source=../common/unix/DownloadURL.sh
+source "${BASH_SOURCE%/*}/../common/unix/DownloadURL.sh"
+
 # This script installs the right ICU version
 
 set -ex
@@ -42,32 +45,36 @@ sha1="f2eab775c04ce5f3bdae6c47d06b62158b5d6753"
 
 function Install7ZPackageFromURL {
     url=$1
-    expectedSha1=$2
-    targetDirectory=$3
+    urlExt=$2
+    expectedSha1=$3
+    targetDirectory=$4
 
-    targetFile=`mktemp`
-    wget --tries=5 --waitretry=5 --output-document=$targetFile $url
-    echo "$expectedSha1  $targetFile" | sha1sum --check
-    sudo /usr/local/bin/7z x -yo$targetDirectory $targetFile
-    rm $targetFile
+    targetFile=$(mktemp)
+    DownloadURL "$url" "$urlExt" "$expectedSha1" "$targetFile"
+    sudo /usr/local/bin/7z x -yo"$targetDirectory" "$targetFile"
+    rm "$targetFile"
 }
 
 echo "Installing custom ICU $icuVersion $sha1 packages on RHEL to $icuLocation"
 
-baseBinaryPackageURL="http://master.qt.io/development_releases/prebuilt/icu/prebuilt/$icuVersion/icu-linux-g++-Rhel6.6-x64.7z"
-Install7ZPackageFromURL $baseBinaryPackageURL $sha1 "/usr/lib64"
+baseBinaryPackageURL="http://ci-files01-hki.intra.qt.io/input/icu/$icuVersion/icu-linux-g++-Rhel6.6-x64.7z"
+baseBinaryPackageExternalUrl="http://master.qt.io/development_releases/prebuilt/icu/prebuilt/$icuVersion/icu-linux-g++-Rhel6.6-x64.7z"
+Install7ZPackageFromURL "$baseBinaryPackageURL" "$baseBinaryPackageExternalUrl" "$sha1" "/usr/lib64"
 
 echo "Installing custom ICU devel packages on RHEL"
 
 sha1Dev="82f8b216371b848b8d36ecec7fe7b6e9b0dba0df"
-develPackageURL="http://master.qt.io/development_releases/prebuilt/icu/prebuilt/$icuVersion/icu-linux-g++-Rhel6.6-x64-devel.7z"
-tempDir=`mktemp -d`
+develPackageURL="http://ci-files01-hki.intra.qt.io/input/icu/$icuVersion/icu-linux-g++-Rhel6.6-x64-devel.7z"
+develPackageExternalUrl="http://master.qt.io/development_releases/prebuilt/icu/prebuilt/$icuVersion/icu-linux-g++-Rhel6.6-x64-devel.7z"
+tempDir=$(mktemp -d)
+# shellcheck disable=SC2064
 trap "sudo rm -fr $tempDir" EXIT
-Install7ZPackageFromURL $develPackageURL $sha1Dev $tempDir
-sudo cp -a $tempDir/lib/* /usr/lib64
-sudo cp -a $tempDir/* /usr/
+Install7ZPackageFromURL "$develPackageURL" "$develPackageExternalUrl" "$sha1Dev" "$tempDir"
+sudo cp -a "$tempDir/lib"/* /usr/lib64
+sudo cp -a "$tempDir"/* /usr/
 
 sudo /sbin/ldconfig
 
 # Storage version information to ~/versions.txt, which is used to print version information to provision log.
 echo "ICU = $icuVersion" >> ~/versions.txt
+