Update submodules on 'wip/qt6' in qt5

Only qtmultimedia and qtwebengine in this round.

Change-Id: I82a7b1db76aa0074cd42eeaea96e4e0e4539a564
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>

.gitmodules

@@ -1,60 +1,60 @@
 [submodule "qtbase"]
 	path = qtbase
 	url = ../qtbase.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = essential
 [submodule "qtsvg"]
 	depends = qtbase
 	path = qtsvg
 	url = ../qtsvg.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtdeclarative"]
 	depends = qtbase
 	recommends = qtsvg
 	path = qtdeclarative
 	url = ../qtdeclarative.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = essential
 [submodule "qtactiveqt"]
 	depends = qtbase
 	path = qtactiveqt
 	url = ../qtactiveqt.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtscript"]
 	depends = qtbase
 	recommends = qttools
 	path = qtscript
 	url = ../qtscript.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = deprecated
 [submodule "qtmultimedia"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtmultimedia
 	url = ../qtmultimedia.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = essential
 [submodule "qttools"]
 	depends = qtbase
 	recommends = qtdeclarative qtactiveqt
 	path = qttools
 	url = ../qttools.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = essential
 [submodule "qtxmlpatterns"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtxmlpatterns
 	url = ../qtxmlpatterns.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = deprecated
 [submodule "qttranslations"]
 	depends = qttools
 	path = qttranslations
 	url = ../qttranslations.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = essential
 	priority = 30
 [submodule "qtdoc"]
@@ -62,7 +62,7 @@
 	recommends = qtmultimedia qtquickcontrols qtquickcontrols2
 	path = qtdoc
 	url = ../qtdoc.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = essential
 	priority = 40
 [submodule "qtrepotools"]
@@ -83,14 +83,14 @@
 	recommends = qtdeclarative qtquickcontrols qtquickcontrols2 qtserialport
 	path = qtlocation
 	url = ../qtlocation.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtsensors"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtsensors
 	url = ../qtsensors.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtsystems"]
 	depends = qtbase
@@ -123,99 +123,99 @@
 	recommends = qtdeclarative qtandroidextras
 	path = qtconnectivity
 	url = ../qtconnectivity.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtwayland"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtwayland
 	url = ../qtwayland.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qt3d"]
 	depends = qtbase
 	recommends = qtdeclarative qtimageformats qtgamepad
 	path = qt3d
 	url = ../qt3d.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtimageformats"]
 	depends = qtbase
 	path = qtimageformats
 	url = ../qtimageformats.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtgraphicaleffects"]
 	depends = qtdeclarative
 	path = qtgraphicaleffects
 	url = ../qtgraphicaleffects.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtquickcontrols"]
 	depends = qtdeclarative
 	recommends = qtgraphicaleffects
 	path = qtquickcontrols
 	url = ../qtquickcontrols.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtserialbus"]
 	depends = qtbase
 	recommends = qtserialport
 	path = qtserialbus
 	url = ../qtserialbus.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtserialport"]
 	depends = qtbase
 	path = qtserialport
 	url = ../qtserialport.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtx11extras"]
 	depends = qtbase
 	path = qtx11extras
 	url = ../qtx11extras.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtmacextras"]
 	depends = qtbase
 	path = qtmacextras
 	url = ../qtmacextras.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtwinextras"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtwinextras
 	url = ../qtwinextras.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtandroidextras"]
 	depends = qtbase
 	path = qtandroidextras
 	url = ../qtandroidextras.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtwebsockets"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtwebsockets
 	url = ../qtwebsockets.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtwebchannel"]
 	depends = qtbase
 	recommends = qtdeclarative qtwebsockets
 	path = qtwebchannel
 	url = ../qtwebchannel.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtwebengine"]
 	depends = qtdeclarative
 	recommends = qtquickcontrols qtquickcontrols2 qtlocation qtwebchannel qttools
 	path = qtwebengine
 	url = ../qtwebengine.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 	priority = 10
 [submodule "qtcanvas3d"]
@@ -229,98 +229,98 @@
 	recommends = qtwebengine
 	path = qtwebview
 	url = ../qtwebview.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtquickcontrols2"]
 	depends = qtgraphicaleffects
 	recommends = qtimageformats
 	path = qtquickcontrols2
 	url = ../qtquickcontrols2.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = essential
 [submodule "qtpurchasing"]
 	depends = qtbase
 	recommends = qtdeclarative qtandroidextras
 	path = qtpurchasing
 	url = ../qtpurchasing.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtcharts"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtcharts
 	url = ../qtcharts.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtdatavis3d"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtdatavis3d
 	url = ../qtdatavis3d.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtvirtualkeyboard"]
 	depends = qtbase qtdeclarative qtsvg
 	recommends = qtmultimedia qtquickcontrols
 	path = qtvirtualkeyboard
 	url = ../qtvirtualkeyboard.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtgamepad"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtgamepad
 	url = ../qtgamepad.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtscxml"]
 	depends = qtbase qtdeclarative
 	path = qtscxml
 	url = ../qtscxml.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtspeech"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtspeech
 	url = ../qtspeech.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtnetworkauth"]
 	depends = qtbase
 	path = qtnetworkauth
 	url = ../qtnetworkauth.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtremoteobjects"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtremoteobjects
 	url = ../qtremoteobjects.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtwebglplugin"]
 	depends = qtbase qtwebsockets
 	recommends = qtdeclarative
 	path = qtwebglplugin
 	url = ../qtwebglplugin.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = addon
 [submodule "qtlottie"]
 	depends = qtbase qtdeclarative
 	path = qtlottie
 	url = ../qtlottie.git
-	branch = 5.14.0
+	branch = wip/qt6
 	status = preview
 [submodule "qtquicktimeline"]
 	depends = qtbase qtdeclarative
 	path = qtquicktimeline
 	url = ../qtquicktimeline
-	branch = 5.14.0
+	branch = wip/qt6
 	status = preview
 [submodule "qtquick3d"]
 	depends = qtbase qtdeclarative
 	path = qtquick3d
 	url = ../qtquick3d.git
-	branch = 5.14.0
-	status = preview
+	branch = dev
+	status = ignore

coin/platform_configs/default.yaml

@@ -1,60 +1,12 @@
-Version: 2
-Module only: True
-Configurations:
--
-    Template: 'qtci-windows-10-x86_64-15'
-    Compiler: 'MSVC2015'
-    Features: ['DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -developer-build -release -angle -qtnamespace TestNamespace -qtlibinfix TestInfix -nomake tests -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -plugin-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64%'
 -
     Template: 'qtci-windows-7-x86-3'
     Compiler: 'Mingw73'
     Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -developer-build -release -nomake tests -opengl dynamic -nomake examples -openssl -I %OPENSSL_INCLUDE_x86% -L %OPENSSL_LIB_x86% -plugin-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x86% -L %MYSQL_LIB_x86% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x86% -L %POSTGRESQL_LIB_x86% -platform win32-g++'
 -
-    Template: 'qtci-windows-10-x86_64-15'
-    Target arch: 'x86'
-    Compiler: 'MSVC2017'
-    Features: ['Packaging']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -opengl dynamic -nomake examples -openssl -I %OPENSSL_INCLUDE_x86% -L %OPENSSL_LIB_x86% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x86% -L %MYSQL_LIB_x86% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x86% -L %POSTGRESQL_LIB_x86%'
--
-    Template: 'qtci-windows-10-x86_64-15'
-    Target arch: 'x86'
-    Compiler: 'MSVC2019'
-    Features: ['DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -opengl dynamic -nomake examples -openssl -I %OPENSSL_INCLUDE_x86% -L %OPENSSL_LIB_x86% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x86% -L %MYSQL_LIB_x86% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x86% -L %POSTGRESQL_LIB_x86%'
--
-    Template: 'qtci-windows-10-x86_64-15'
-    Compiler: 'MSVC2015'
-    Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -nomake examples -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64%'
--
-    Template: 'qtci-windows-10-x86_64-15'
-    Target os: 'WinRT_10'
-    Target arch: 'x86'
-    Compiler: 'MSVC2015'
-    Features: ['DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -nomake examples -no-sql-mysql -platform win32-msvc2015 -xplatform winrt-x86-msvc2015'
--
-    Template: 'qtci-windows-10-x86_64-15'
-    Target os: 'WinRT_10'
-    Target arch: 'armv7'
-    Compiler: 'MSVC2015'
-    Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -nomake examples -no-sql-mysql -platform win32-msvc2015 -xplatform winrt-arm-msvc2015'
--
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-windows-10-x86_64-14'
     Compiler: 'MSVC2017'
     Features: ['Packaging']
     Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -opengl dynamic -nomake examples -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64%'
--
-    Template: 'qtci-windows-10-x86_64-15'
-    Compiler: 'MSVC2019'
-    Features: ['DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -opengl dynamic -nomake examples -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64%'
--
-    Template: 'qtci-linux-Ubuntu-18.04-x86_64'
-    Compiler: 'GCC'
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -developer-build -nomake tests -R . -qtlibinfix TestInfix -qtnamespace TestNamespace -openssl -I {{.Env.OPENSSL_HOME}}/include -L {{.Env.OPENSSL_HOME}}/lib'
 -
     Template: 'qtci-linux-Ubuntu-18.04-x86_64'
     Compiler: 'GCC'
@@ -64,11 +16,6 @@ Configurations:
     Compiler: 'GCC'
     Features: ['OutOfSourceBuild', 'Documentation']
     Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -developer-build -nomake tests -R . -qtlibinfix TestInfix -qtnamespace TestNamespace -openssl -I {{.Env.OPENSSL_HOME}}/include -L {{.Env.OPENSSL_HOME}}/lib'
-
--
-    Template: 'qtci-linux-openSUSE-15.0-x86_64'
-    Compiler: 'GCC'
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -developer-build -nomake tests -nomake examples -no-pch -R . -openssl -I {{.Env.OPENSSL_HOME}}/include -L {{.Env.OPENSSL_HOME}}/lib'
 -
     Template: 'qtci-linux-openSUSE-15.0-x86_64'
     Compiler: 'ICC_18'
@@ -80,47 +27,32 @@ Configurations:
     Compiler: 'GCC'
     Features: ['Packaging', 'DisableTests']
     Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -developer-build -release -static -nomake tests -nomake examples -no-sql-mysql -no-pch -no-dbus -no-headersclean -no-ssl -no-warnings-are-errors -no-feature-thread -xplatform wasm-emscripten'
--
-    Template: 'qtci-linux-SLES-15-x86_64'
-    Compiler: 'GCC'
-    Features: ['DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -developer-build -no-sql-mysql -no-pch -R . -openssl -I {{.Env.OPENSSL_HOME}}/include -L {{.Env.OPENSSL_HOME}}/lib'
 -
     Template: 'qtci-linux-RHEL-7.6-x86_64'
     Compiler: 'GCC'
     Features: ['Packaging']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-libudev -no-use-gold-linker -force-debug-info -separate-debug-info -no-sql-mysql -plugin-sql-psql -plugin-sql-sqlite -qt-libjpeg -qt-libpng -qt-xcb -sysconfdir /etc/xdg -qt-pcre -qt-harfbuzz -R . -openssl -I {{.Env.OPENSSL_HOME}}/include -L {{.Env.OPENSSL_HOME}}/lib QMAKE_LFLAGS_APP+=-s'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-libudev -no-use-gold-linker -force-debug-info -separate-debug-info -no-sql-mysql -plugin-sql-psql -plugin-sql-sqlite -qt-libjpeg -qt-libpng -xcb -sysconfdir /etc/xdg -qt-pcre -qt-harfbuzz -R . -openssl -I {{.Env.OPENSSL_HOME}}/include -L {{.Env.OPENSSL_HOME}}/lib'
 -
     Template: 'qtci-macos-10.13-x86_64-2'
     Compiler: 'Clang'
     Features: ['Packaging']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /Users/qt/work/install -release -force-debug-info -separate-debug-info -nomake tests -nomake examples -no-sql-mysql -plugin-sql-psql -plugin-sql-sqlite -sysconfdir /Library/Preferences/Qt -I/usr/local/opt/openssl/include'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /Users/qt/work/install -debug-and-release -release -nomake tests -nomake examples -no-sql-mysql -plugin-sql-psql -plugin-sql-sqlite -xplatform macx-clang -separate-debug-info -sdk macosx -device-option QMAKE_APPLE_DEVICE_ARCHS=x86_64 -sysconfdir /Library/Preferences/Qt -I/usr/local/opt/openssl/include'
 -
-    Template: 'qtci-macos-10.14-x86_64'
-    Compiler: 'Clang'
-    Features: ['DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /Users/qt/work/install -debug-and-release -release -nomake tests -no-sql-mysql -plugin-sql-psql -plugin-sql-sqlite -sysconfdir /Library/Preferences/Qt -I/usr/local/opt/openssl/include'
--
-    Template: 'qtci-macos-10.14-x86_64'
-    Compiler: 'Clang'
-    Features: ['DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /Users/qt/work/install -developer-build -release -no-pch -no-framework -qtnamespace TestNamespace -nomake tests -nomake examples -I/usr/local/opt/openssl/include'
--
-    Template: 'qtci-macos-10.14-x86_64'
+    Template: 'qtci-macos-10.13-x86_64-2'
     Target os: 'IOS_ANY'
     Target arch: 'multi'
     Compiler: 'Clang'
     Features: ['Packaging', 'DisableTests']
     Configure arguments: '-opensource -confirm-license -verbose -prefix /Users/qt/work/install -debug-and-release -nomake tests -no-icu -nomake examples -no-sql-mysql -no-sql-psql -plugin-sql-sqlite -static -xplatform macx-ios-clang'
 -
-    Template: 'qtci-macos-10.14-x86_64'
+    Template: 'qtci-macos-10.13-x86_64-2'
     Target os: 'TvOS_ANY'
     Target arch: 'multi'
     Compiler: 'Clang'
     Features: ['DisableTests']
     Configure arguments: '-opensource -confirm-license -verbose -prefix /Users/qt/work/install -debug-and-release -nomake tests -nomake examples -no-sql-mysql -no-sql-psql -plugin-sql-sqlite -xplatform macx-tvos-clang'
 -
-    Template: 'qtci-macos-10.14-x86_64'
+    Template: 'qtci-macos-10.13-x86_64-2'
     Target os: 'WatchOS_ANY'
     Target arch: 'multi'
     Compiler: 'Clang'
@@ -129,47 +61,39 @@ Configurations:
 -
     Template: 'qtci-linux-RHEL-7.6-x86_64'
     Target os: 'Android_ANY'
-    Target arch: 'multi'
+    Target arch: 'armv7'
     Compiler: 'Clang'
     Target compiler: 'Clang'
     Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-sql-mysql -no-dbus -no-use-gold-linker -no-qpa-platform-guard -opengl es2 -sysconfdir /etc/xdg -openssl -I {{.Env.OPENSSL_ANDROID_HOME}}/include -xplatform android-clang -android-sdk /opt/android/sdk -android-ndk /opt/android/android-ndk-r20 -android-ndk-host linux-x86_64'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-sql-mysql -no-dbus -no-qpa-platform-guard -no-use-gold-linker -sysconfdir /etc/xdg -opengl es2 -openssl -I {{.Env.OPENSSL_ANDROID_HOME}}/include -android-sdk /opt/android/sdk -android-ndk /opt/android/android-ndk-r20 -android-ndk-host linux-x86_64 -android-arch armeabi-v7a -xplatform android-clang'
+-
+    Template: 'qtci-linux-RHEL-7.6-x86_64'
+    Target os: 'Android_ANY'
+    Target arch: 'arm64'
+    Compiler: 'Clang'
+    Target compiler: 'Clang'
+    Features: ['Packaging', 'DisableTests']
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-sql-mysql -no-dbus -no-qpa-platform-guard -no-use-gold-linker -sysconfdir /etc/xdg -opengl es2 -openssl -I {{.Env.OPENSSL_ANDROID_HOME}}/include -android-sdk /opt/android/sdk -android-ndk /opt/android/android-ndk-r20 -android-ndk-host linux-x86_64 -android-arch arm64-v8a -xplatform android-clang'
 -
     Template: 'qtci-linux-Ubuntu-18.04-x86_64'
     Target os: 'QEMU'
     Target arch: 'armv7'
     Compiler: 'GCC'
-    Environment variables: ['GST_PLUGIN_SCANNER=/opt/yocto-armv7/sysroots/armv7at2hf-neon-poky-linux-gnueabi/usr/libexec/gstreamer-1.0/gst-plugin-scanner']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-xcb -R . -openssl -device linux-imx7-g++ -device-option CROSS_COMPILE=/opt/yocto-armv7/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi- -device-option DISTRO_OPTS="hard-float boot2qt" -sysroot /opt/yocto-armv7/sysroots/armv7at2hf-neon-poky-linux-gnueabi -extprefix /home/qt/work/install -mysql_config /opt/yocto-armv7/sysroots/armv7at2hf-neon-poky-linux-gnueabi/usr/bin/mysql_config -psql_config /dev/null -tslib'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-xcb -R . -openssl -device linux-imx7-g++ -device-option CROSS_COMPILE=/opt/yocto-armv7/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi- -device-option DISTRO_OPTS="hard-float boot2qt" -sysroot /opt/yocto-armv7/sysroots/armv7ahf-neon-poky-linux-gnueabi -extprefix /home/qt/work/install -mysql_config /opt/yocto-armv7/sysroots/armv7ahf-neon-poky-linux-gnueabi/usr/bin/mysql_config -psql_config /dev/null -tslib'
 -
     Template: 'qtci-linux-Ubuntu-18.04-x86_64'
     Target os: 'QEMU'
     Target arch: 'arm64'
     Compiler: 'GCC'
-    Environment variables: ['GST_PLUGIN_SCANNER=/opt/yocto-arm64/sysroots/aarch64-poky-linux/usr/libexec/gstreamer-1.0/gst-plugin-scanner']
     Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-xcb -R . -openssl -device linux-generic-g++ -device-option CROSS_COMPILE=/opt/yocto-arm64/sysroots/x86_64-pokysdk-linux/usr/bin/aarch64-poky-linux/aarch64-poky-linux- -device-option DISTRO_OPTS=boot2qt -sysroot /opt/yocto-arm64/sysroots/aarch64-poky-linux -extprefix /home/qt/work/install -mysql_config /opt/yocto-arm64/sysroots/aarch64-poky-linux/usr/bin/mysql_config -psql_config /dev/null -tslib'
--
-    Template: 'qtci-linux-Ubuntu-18.04-x86_64'
-    Target os: 'QEMU'
-    Target arch: 'mips64'
-    Compiler: 'GCC'
-    Features: ['DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-xcb -R . -openssl -device linux-generic-g++ -device-option CROSS_COMPILE=/opt/yocto-mips64/sysroots/x86_64-pokysdk-linux/usr/bin/mips64-poky-linux/mips64-poky-linux- -device-option DISTRO_OPTS=boot2qt -sysroot /opt/yocto-mips64/sysroots/mips64-poky-linux -extprefix /home/qt/work/install -mysql_config /opt/yocto-mips64/sysroots/mips64-poky-linux/usr/bin/mysql_config -psql_config /dev/null -tslib'
 -
     Template: 'qtci-linux-Ubuntu-18.04-x86_64'
     Compiler: 'GCC'
     Features: ['TestOnly', 'LicenseCheck']
--
-    Template: 'qtci-linux-RHEL-7.6-x86_64'
-    Target os: 'INTEGRITY_11_04'
-    Target arch: 'armv7'
-    Compiler: 'GCC'
-    Features: ['DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-use-gold-linker -opengl es2 -xplatform integrity-armv7-imx6'
 -
     Template: 'qtci-linux-RHEL-7.6-x86_64'
     Target os: 'QNX_700'
     Target arch: 'armv7'
     Compiler: 'GCC'
     Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -extprefix /home/qt/work/install -release -nomake tests -nomake examples -no-use-gold-linker -opengl es2 -no-sql-mysql -qpa qnx -xplatform qnx-armle-v7-qcc'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-use-gold-linker -opengl es2 -no-sql-mysql -qpa qnx -xplatform qnx-armle-v7-qcc'

coin/platform_configs/flashing-wizard.yaml

@@ -1,23 +0,0 @@
-Version: 2
-Module only: True
-Configurations:
-    -
-        Template: 'qtci-windows-10-x86_64-14'
-        Compiler: 'MSVC2017'
-        Features: ['Packaging']
-        Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -opengl dynamic -nomake examples -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64% -static -no-icu'
-    -
-        Template: 'qtci-windows-10-x86_64-14'
-        Compiler: 'MSVC2017'
-        Target arch: 'x86'
-        Features: ['Packaging']
-        Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -nomake examples -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x86% -L %OPENSSL_LIB_x86% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x86% -L %MYSQL_LIB_x86% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x86% -L %POSTGRESQL_LIB_x86% -static -no-icu'
-    -
-        Template: 'qtci-linux-RHEL-7.6-x86_64'
-        Compiler: 'GCC'
-        Features: ['Packaging']
-        Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-libudev -no-use-gold-linker -force-debug-info -no-sql-mysql -plugin-sql-psql -plugin-sql-sqlite -qt-libjpeg -qt-libpng -qt-xcb -sysconfdir /etc/xdg -qt-pcre -qt-harfbuzz -openssl -I {{.Env.OPENSSL_HOME}}/include -L {{.Env.OPENSSL_HOME}}/lib QMAKE_LFLAGS_APP+=-s -static -no-icu'
-    -
-        Template: 'qtci-linux-Ubuntu-18.04-x86_64'
-        Compiler: 'GCC'
-        Features: ['TestOnly', 'LicenseCheck']

coin/platform_configs/qdb.yaml

@@ -1,23 +0,0 @@
-Version: 2
-Module only: True
-Configurations:
-    -
-        Template: 'qtci-windows-10-x86_64-14'
-        Compiler: 'MSVC2015'
-        Target arch: 'x86'
-        Features: ['Packaging']
-        Configure arguments: '-opensource -confirm-license -nomake tests -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -opengl dynamic -static -no-icu -nomake examples -openssl -I %OPENSSL_INCLUDE_x86% -L %OPENSSL_LIB_x86% -plugin-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x86% -L %MYSQL_LIB_x86%'
-    -
-        Template: 'qtci-windows-10-x86_64-14'
-        Compiler: 'MSVC2015'
-        Features: ['Packaging']
-        Configure arguments: '-opensource -confirm-license -nomake tests -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -opengl dynamic -static -no-icu -nomake examples -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -plugin-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64%'
-    -
-        Template: 'qtci-linux-RHEL-7.6-x86_64'
-        Compiler: 'GCC'
-        Features: ['Packaging']
-        Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-libudev -no-use-gold-linker -force-debug-info -no-sql-mysql -plugin-sql-psql -plugin-sql-sqlite -qt-libjpeg -qt-libpng -qt-xcb -sysconfdir /etc/xdg -qt-pcre -qt-harfbuzz -openssl -I {{.Env.OPENSSL_HOME}}/include -L {{.Env.OPENSSL_HOME}}/lib QMAKE_LFLAGS_APP+=-s -static -no-icu'
-    -
-        Template: 'qtci-linux-Ubuntu-18.04-x86_64'
-        Compiler: 'GCC'
-        Features: ['TestOnly', 'LicenseCheck']

coin/platform_configs/qt5.yaml

@@ -1,11 +1,11 @@
 -
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-windows-10-x86_64-14'
     Target os: 'WinRT_10'
     Compiler: 'MSVC2015'
     Features: ['Packaging', 'DisableTests']
     Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -debug-and-release -nomake tests -nomake examples -force-debug-info -no-sql-mysql -platform win32-msvc2015 -xplatform winrt-x64-msvc2015'
 -
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-windows-10-x86_64-14'
     Target os: 'WinRT_10'
     Target arch: 'x86'
     Compiler: 'MSVC2017'
@@ -15,89 +15,123 @@
     Template: 'qtci-windows-7-x86-3'
     Compiler: 'Mingw73'
     Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -force-debug-info -separate-debug-info -nomake tests -nomake examples -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x86% -L %OPENSSL_LIB_x86% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x86% -L %MYSQL_LIB_x86% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x86% -L %POSTGRESQL_LIB_x86% -platform win32-g++'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -nomake tests -nomake examples -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x86% -L %OPENSSL_LIB_x86% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x86% -L %MYSQL_LIB_x86% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x86% -L %POSTGRESQL_LIB_x86% -platform win32-g++'
 -
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-windows-10-x86_64-14'
     Compiler: 'Mingw73'
     Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -force-debug-info -separate-debug-info -nomake tests -nomake examples -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64% -platform win32-g++'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -nomake tests -nomake examples -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64% -platform win32-g++'
 -
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-windows-10-x86_64-14'
     Target os: 'WinRT_10'
     Target arch: 'armv7'
     Compiler: 'MSVC2017'
     Features: ['Packaging', 'DisableTests']
     Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -debug-and-release -nomake tests -nomake examples -force-debug-info -no-sql-mysql -platform win32-msvc2017 -xplatform winrt-arm-msvc2017'
 -
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-windows-10-x86_64-14'
     Target os: 'WinRT_10'
     Compiler: 'MSVC2017'
     Features: ['Packaging', 'DisableTests']
     Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -debug-and-release -nomake tests -nomake examples -force-debug-info -no-sql-mysql -platform win32-msvc2017 -xplatform winrt-x64-msvc2017'
 -
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-linux-RHEL-7.6-x86_64'
     Target os: 'Android_ANY'
-    Target arch: 'multi'
+    Target arch: 'x86'
+    Compiler: 'GCC'
+    Target compiler: 'Clang'
+    Features: ['Packaging', 'DisableTests']
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-sql-mysql -no-dbus -no-use-gold-linker -no-qpa-platform-guard -opengl es2 -sysconfdir /etc/xdg -openssl -I {{.Env.OPENSSL_ANDROID_HOME}}/include -xplatform android-clang -android-sdk /opt/android/sdk -android-ndk /opt/android/android-ndk-r20 -android-ndk-host linux-x86_64 -android-arch x86'
+-
+    Template: 'qtci-windows-10-x86_64-14'
+    Target os: 'Android_ANY'
+    Target arch: 'armv7'
     Compiler: 'Mingw73'
     Target compiler: 'Clang'
     Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -nomake tests -nomake examples -no-sql-mysql -no-dbus -opengl es2 -sysconfdir /etc/xdg -openssl -I c:\utils\openssl-android-master\include -xplatform android-clang -android-sdk C:\Utils\Android -android-ndk c:\Utils\Android\android-ndk-r20'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -nomake tests -nomake examples -no-sql-mysql -no-dbus -opengl es2 -sysconfdir /etc/xdg -openssl -I c:\utils\openssl-android-master\include -xplatform android-clang -android-sdk C:\Utils\Android -android-ndk c:\Utils\Android\android-ndk-r20 -android-arch armeabi-v7a'
+-
+    Template: 'qtci-windows-10-x86_64-14'
+    Target os: 'Android_ANY'
+    Target arch: 'arm64'
+    Compiler: 'Mingw73'
+    Target compiler: 'Clang'
+    Features: ['Packaging', 'DisableTests']
+    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -nomake tests -nomake examples -no-sql-mysql -no-dbus -opengl es2 -sysconfdir /etc/xdg -openssl -I c:\utils\openssl-android-master\include -xplatform android-clang -android-sdk C:\Utils\Android -android-ndk c:\Utils\Android\android-ndk-r20 -android-arch arm64-v8a'
+-
+    Template: 'qtci-windows-10-x86_64-14'
+    Target os: 'Android_ANY'
+    Target arch: 'x86'
+    Compiler: 'Mingw73'
+    Target compiler: 'Clang'
+    Features: ['Packaging', 'DisableTests']
+    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -nomake tests -nomake examples -no-sql-mysql -no-dbus -opengl es2 -sysconfdir /etc/xdg -openssl -I c:\utils\openssl-android-master\include -xplatform android-clang -android-sdk C:\Utils\Android -android-ndk c:\Utils\Android\android-ndk-r20 -android-arch x86'
 -
     Template: 'qtci-macos-10.13-x86_64-2'
     Target os: 'Android_ANY'
-    Target arch: 'multi'
+    Target arch: 'armv7'
     Compiler: 'Clang'
     Target compiler: 'Clang'
     Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /Users/qt/work/install -release -nomake tests -nomake examples -no-sql-mysql -no-dbus -no-qpa-platform-guard -opengl es2 -sysconfdir /etc/xdg -openssl -I /usr/local/opt/openssl/include -xplatform android-clang -android-sdk /opt/android/sdk -android-ndk /opt/android/android-ndk-r20 -android-ndk-host darwin-x86_64'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /Users/qt/work/install -release -nomake tests -nomake examples -no-sql-mysql -no-dbus -no-qpa-platform-guard -opengl es2 -sysconfdir /etc/xdg -openssl -I /usr/local/opt/openssl/include -xplatform android-clang -android-sdk /opt/android/sdk -android-ndk /opt/android/android-ndk-r20 -android-ndk-host darwin-x86_64 -android-arch armeabi-v7a'
+-
+    Template: 'qtci-macos-10.13-x86_64-2'
+    Target os: 'Android_ANY'
+    Target arch: 'arm64'
+    Compiler: 'Clang'
+    Target compiler: 'Clang'
+    Features: ['Packaging', 'DisableTests']
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /Users/qt/work/install -release -nomake tests -nomake examples -no-sql-mysql -no-dbus -no-qpa-platform-guard -opengl es2 -sysconfdir /etc/xdg -openssl -I /usr/local/opt/openssl/include -xplatform android-clang -android-sdk /opt/android/sdk -android-ndk /opt/android/android-ndk-r20 -android-ndk-host darwin-x86_64 -android-arch arm64-v8a'
+-
+    Template: 'qtci-macos-10.13-x86_64-2'
+    Target os: 'Android_ANY'
+    Target arch: 'x86'
+    Compiler: 'Clang'
+    Target compiler: 'Clang'
+    Features: ['Packaging', 'DisableTests']
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /Users/qt/work/install -release -nomake tests -nomake examples -no-sql-mysql -no-dbus -no-qpa-platform-guard -opengl es2 -sysconfdir /etc/xdg -openssl -I /usr/local/opt/openssl/include -xplatform android-clang -android-sdk /opt/android/sdk -android-ndk /opt/android/android-ndk-r20 -android-ndk-host darwin-x86_64 -android-arch x86'
 -
     Template: 'qtci-macos-10.13-x86_64-2'
     Target os: 'QNX_700'
     Target arch: 'x86'
     Compiler: 'GCC'
     Features: ['DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -extprefix /Users/qt/work/install -release -nomake tests -nomake examples -no-use-gold-linker -opengl es2 -qpa qnx -xplatform qnx-x86-qcc'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /Users/qt/work/install -release -nomake tests -nomake examples -no-use-gold-linker -opengl es2 -qpa qnx -xplatform qnx-x86-qcc'
 -
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-windows-10-x86_64-14'
     Target os: 'QNX_700'
     Target arch: 'armv7'
     Compiler: 'Mingw73'
     Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -extprefix c:\Users\qt\work\install -release -nomake tests -nomake examples -no-sql-mysql -opengl es2 -xplatform qnx-armle-v7-qcc'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -nomake tests -nomake examples -no-sql-mysql -opengl es2 -xplatform qnx-armle-v7-qcc'
 -
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-windows-10-x86_64-14'
     Target os: 'QNX_700'
     Target arch: 'armv8'
     Compiler: 'Mingw73'
     Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -extprefix c:\Users\qt\work\install -release -opengl es2 -nomake tests -nomake examples -no-sql-mysql -xplatform qnx-aarch64le-qcc'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -opengl es2 -nomake tests -nomake examples -no-sql-mysql -xplatform qnx-aarch64le-qcc'
 -
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-windows-10-x86_64-14'
     Target os: 'QNX_700'
     Target arch: 'x86_64'
     Compiler: 'Mingw73'
     Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -extprefix c:\Users\qt\work\install -release -nomake tests -nomake examples -no-sql-mysql -opengl es2 -xplatform qnx-x86-64-qcc'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -nomake tests -nomake examples -no-sql-mysql -opengl es2 -xplatform qnx-x86-64-qcc'
 -
     Template: 'qtci-linux-RHEL-7.6-x86_64'
     Target os: 'QNX_700'
     Target arch: 'armv8'
     Compiler: 'GCC'
     Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -extprefix /home/qt/work/install -release -nomake tests -nomake examples -no-sql-mysql -no-use-gold-linker -opengl es2 -qpa qnx -xplatform qnx-aarch64le-qcc'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-sql-mysql -no-use-gold-linker -opengl es2 -qpa qnx -xplatform qnx-aarch64le-qcc'
 -
     Template: 'qtci-linux-RHEL-7.6-x86_64'
     Target os: 'QNX_700'
     Target arch: 'x86_64'
     Compiler: 'GCC'
     Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -extprefix /home/qt/work/install -release -nomake tests -nomake examples -no-sql-mysql -no-use-gold-linker -opengl es2 -qpa qnx -xplatform qnx-x86-64-qcc'
--
-    Template: 'qtci-windows-10-x86_64-15'
-    Target os: 'WebAssembly'
-    Compiler: 'Mingw73'
-    Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -nomake examples -nomake tests -no-feature-thread -static -no-dbus -no-headersclean -no-ssl -no-warnings-are-errors -no-pch -platform win32-g++ -xplatform wasm-emscripten'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-sql-mysql -no-use-gold-linker -opengl es2 -qpa qnx -xplatform qnx-x86-64-qcc'
 -
     Template: 'qtci-macos-10.13-x86_64-2'
     Target os: 'WebAssembly'

coin/platform_configs/qtbase.yaml

@@ -4,7 +4,7 @@
     Target arch: 'armv7'
     Compiler: 'GCC'
     Features: ['DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -developer-build -nomake tests -nomake examples -no-xcb -R . -openssl -device linux-imx7-g++ -device-option CROSS_COMPILE=/opt/yocto-armv7/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi- -device-option DISTRO_OPTS="hard-float boot2qt" -sysroot /opt/yocto-armv7/sysroots/armv7at2hf-neon-poky-linux-gnueabi -extprefix /home/qt/work/install -mysql_config /opt/yocto-armv7/sysroots/armv7at2hf-neon-poky-linux-gnueabi/usr/bin/mysql_config -psql_config /dev/null -tslib'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -developer-build -nomake tests -nomake examples -no-xcb -R . -openssl -device linux-imx7-g++ -device-option CROSS_COMPILE=/opt/yocto-armv7/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi- -device-option DISTRO_OPTS="hard-float boot2qt" -sysroot /opt/yocto-armv7/sysroots/armv7ahf-neon-poky-linux-gnueabi -extprefix /home/qt/work/install -mysql_config /opt/yocto-armv7/sysroots/armv7ahf-neon-poky-linux-gnueabi/usr/bin/mysql_config -psql_config /dev/null -tslib'
 -
     Template: 'qtci-linux-Ubuntu-18.04-x86_64'
     Target os: 'QEMU'
@@ -12,12 +12,6 @@
     Compiler: 'GCC'
     Features: ['DisableTests']
     Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -developer-build -nomake tests -nomake examples -no-xcb -R . -openssl -device linux-generic-g++ -device-option CROSS_COMPILE=/opt/yocto-arm64/sysroots/x86_64-pokysdk-linux/usr/bin/aarch64-poky-linux/aarch64-poky-linux- -device-option DISTRO_OPTS=boot2qt -sysroot /opt/yocto-arm64/sysroots/aarch64-poky-linux -extprefix /home/qt/work/install -mysql_config /opt/yocto-arm64/sysroots/aarch64-poky-linux/usr/bin/mysql_config -psql_config /dev/null -tslib'
--
-    Template: 'qtci-windows-10-x86_64-15'
-    Target os: 'WinRT_10'
-    Target arch: 'x86_64'
-    Compiler: 'MSVC2015'
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -developer-build -static -nomake tests -nomake examples -no-icu -force-debug-info -platform win32-msvc2015 -xplatform winrt-x64-msvc2015'
 -
     Template: 'qtci-linux-openSUSE-15.0-x86_64'
     Target os: 'WebAssembly'

coin/platform_configs/qtconnectivity.yaml

@@ -1,5 +1,5 @@
 -
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-windows-10-x86_64-14'
     Target os: 'WinRT_10'
     Target arch: 'x86_64'
     Compiler: 'MSVC2015'

coin/platform_configs/qtdeclarative.yaml

@@ -3,7 +3,7 @@
     Target os: 'QEMU'
     Target arch: 'armv7'
     Compiler: 'GCC'
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -developer-build -nomake tests -nomake examples -no-xcb -R . -openssl -device linux-imx7-g++ -device-option CROSS_COMPILE=/opt/yocto-armv7/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi- -device-option DISTRO_OPTS="hard-float boot2qt" -sysroot /opt/yocto-armv7/sysroots/armv7at2hf-neon-poky-linux-gnueabi -extprefix /home/qt/work/install -mysql_config /opt/yocto-armv7/sysroots/armv7at2hf-neon-poky-linux-gnueabi/usr/bin/mysql_config -psql_config /dev/null -tslib'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -developer-build -nomake tests -nomake examples -no-xcb -R . -openssl -device linux-imx7-g++ -device-option CROSS_COMPILE=/opt/yocto-armv7/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi- -device-option DISTRO_OPTS="hard-float boot2qt" -sysroot /opt/yocto-armv7/sysroots/armv7ahf-neon-poky-linux-gnueabi -extprefix /home/qt/work/install -mysql_config /opt/yocto-armv7/sysroots/armv7ahf-neon-poky-linux-gnueabi/usr/bin/mysql_config -psql_config /dev/null -tslib'
 -
     Template: 'qtci-linux-Ubuntu-18.04-x86_64'
     Target os: 'QEMU'
@@ -15,7 +15,7 @@
     Target os: 'QEMU'
     Target arch: 'armv7'
     Compiler: 'GCC'
-    Configure arguments: '-opensource -confirm-license -R . -developer-build -device linux-imx7-g++ -device-option CROSS_COMPILE=/opt/yocto-armv7/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi- -device-option DISTRO_OPTS="hard-float boot2qt" -extprefix /home/qt/work/install -mysql_config /opt/yocto-armv7/sysroots/armv7at2hf-neon-poky-linux-gnueabi/usr/bin/mysql_config -no-xcb -nomake examples -nomake tests -openssl -prefix /home/qt/work/install -psql_config /dev/null -sysroot /opt/yocto-armv7/sysroots/armv7at2hf-neon-poky-linux-gnueabi -tslib -verbose'
+    Configure arguments: '-opensource -confirm-license -R . -developer-build -device linux-imx7-g++ -device-option CROSS_COMPILE=/opt/yocto-armv7/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi- -device-option DISTRO_OPTS="hard-float boot2qt" -extprefix /home/qt/work/install -mysql_config /opt/yocto-armv7/sysroots/armv7ahf-neon-poky-linux-gnueabi/usr/bin/mysql_config -no-xcb -nomake examples -nomake tests -openssl -prefix /home/qt/work/install -psql_config /dev/null -sysroot /opt/yocto-armv7/sysroots/armv7ahf-neon-poky-linux-gnueabi -tslib -verbose'
 -
     Template: 'qtci-linux-Ubuntu-18.04-x86_64'
     Target os: 'QEMU'

coin/platform_configs/qtsaferenderer.yaml

@@ -1,14 +1,13 @@
 -
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-windows-10-x86_64-14'
     Compiler: 'Mingw73'
     Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -developer-build -nomake tests -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -plugin-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64% -platform win32-g++'
 -
-    Template: 'qtci-windows-10-x86_64-15'
+    Template: 'qtci-windows-10-x86_64-14'
     Compiler: 'Mingw73'
-    Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -static -nomake tests -nomake examples -no-icu -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -plugin-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -platform win32-g++'
+    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -developer-build -static -nomake tests -nomake examples -no-icu -opengl dynamic -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -plugin-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -platform win32-g++'
 -
     Template: 'qtci-linux-RHEL-7.6-x86_64'
     Compiler: 'GCC'
-    Features: ['Packaging', 'DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -static -nomake tests -nomake examples -no-use-gold-linker -no-icu -no-fontconfig -qt-freetype -no-opengl -qpa offscreen -no-xcb -qt-libpng -no-vulkan'
+    Features: ['DisableTests']
+    Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -developer-build -static -nomake tests -nomake examples -no-use-gold-linker'

coin/platform_configs/qtsdk.yaml

@@ -6,8 +6,3 @@
     Template: 'qtci-linux-RHEL-6.6-x86_64'
     Compiler: 'GCC'
     Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -force-debug-info -nomake examples -nomake tests'
--
-    Template: 'qtci-windows-8.1-x86'
-    Compiler: 'MSVC2015'
-    Features: ['DisableTests']
-    Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -release -force-debug-info -opengl dynamic -nomake examples -nomake tests'

coin/platform_configs/tqtc-qt-config-gui.yaml

@@ -1,28 +0,0 @@
-Version: 2
-Module only: True
-Configurations:
-    -
-        Template: 'qtci-windows-10-x86_64-14'
-        Compiler: 'MSVC2017'
-        Features: ['Packaging']
-        Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -opengl dynamic -nomake examples -openssl -I %OPENSSL_INCLUDE_x64% -L %OPENSSL_LIB_x64% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x64% -L %MYSQL_LIB_x64% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x64% -L %POSTGRESQL_LIB_x64% -static -no-icu'
-    -
-        Template: 'qtci-windows-10-x86_64-14'
-        Compiler: 'MSVC2017'
-        Target arch: 'x86'
-        Features: ['Packaging']
-        Configure arguments: '-opensource -confirm-license -verbose -prefix c:\Users\qt\work\install -debug-and-release -release -force-debug-info -nomake tests -opengl dynamic -nomake examples -openssl -I %OPENSSL_INCLUDE_x86% -L %OPENSSL_LIB_x86% -no-sql-mysql -plugin-sql-sqlite -plugin-sql-odbc -I %MYSQL_INCLUDE_x86% -L %MYSQL_LIB_x86% -plugin-sql-psql -I %POSTGRESQL_INCLUDE_x86% -L %POSTGRESQL_LIB_x86% -static -no-icu'
-    -
-        Template: 'qtci-linux-RHEL-7.6-x86_64'
-        Compiler: 'GCC'
-        Features: ['Packaging']
-        Configure arguments: '-opensource -confirm-license -verbose -prefix /home/qt/work/install -release -nomake tests -nomake examples -no-libudev -no-use-gold-linker -force-debug-info -no-sql-mysql -plugin-sql-psql -plugin-sql-sqlite -qt-libjpeg -qt-libpng -qt-xcb -sysconfdir /etc/xdg -qt-pcre -qt-harfbuzz -openssl -I {{.Env.OPENSSL_HOME}}/include -L {{.Env.OPENSSL_HOME}}/lib QMAKE_LFLAGS_APP+=-s -static -no-icu'
-    -
-        Template: 'qtci-macos-10.13-x86_64-2'
-        Compiler: 'Clang'
-        Features: ['Packaging']
-        Configure arguments: '-opensource -confirm-license -verbose -prefix /Users/qt/work/install -debug-and-release -release -nomake tests -nomake examples -no-sql-mysql -plugin-sql-psql -plugin-sql-sqlite -sysconfdir /Library/Preferences/Qt -I/usr/local/opt/openssl/include -static -no-icu'
-    -
-        Template: 'qtci-linux-Ubuntu-18.04-x86_64'
-        Compiler: 'GCC'
-        Features: ['TestOnly', 'LicenseCheck']

coin/pre-provisioning/qtci-windows-10-x86_64/README_MANUAL_INSTALLATIONS

@@ -1,11 +0,0 @@
-# List about manual pre-installations to Tier1 image:
-
-Vmware tools: installed
-Resolution: 1280 X 800
-Coin setup (installed boostrap agent, disabled fast boot, disabled firewall (both public and private), disabled UAC, enabled autologin)
-Remote Desktop Connection: enabled
-Timezone: set to UTC
-Administrator tools - services - Windows search: stop & disable
-Power settings screen & slee: never
-Turn windows features on or off -> Check the "SMB 1.0/CIFS File Sharing Support"
-

coin/pre-provisioning/qtci-windows-10-x86_64/disable-defragment.ps1

@@ -1,72 +0,0 @@
-#############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# Windows 7 does not have Get-ScheduledTask and Unregister-ScheduledTask
-# thus needing its own version.
-Write-Host "Disabling defragmentation"
-$version = Get-CimInstance Win32_OperatingSystem | Select-Object -ExpandProperty Caption
-if ($version -like '*Windows 7*'){
-    $pi = New-Object System.Diagnostics.ProcessStartInfo
-    $pi.FileName = "C:\Windows\System32\schtasks.exe"
-    $pi.RedirectStandardError = $true
-    $pi.UseShellExecute  = $false
-    $pi.Arguments = "/Delete /TN `"\Microsoft\Windows\Defrag\ScheduledDefrag`" /F"
-    $prog = New-Object System.Diagnostics.Process
-    $prog.StartInfo = $pi
-    $prog.Start() | Out-Null
-    $err = $prog.StandardError.ReadToEnd()
-    $prog.WaitForExit()
-    if ($prog.ExitCode -eq 0){
-        Write-Host "Scheduled defragmentation removed"
-    } else {
-        if ($err -like '*cannot find the file*'){
-            Write-Host "No scheduled defragmentation task found"
-            exit 0
-        } else {
-            Write-Host "Error while deleting scheduled defragmentation task: $err"
-        }
-    }
-}
-else {
-    try {
-        $state = (Get-ScheduledTask -ErrorAction Stop -TaskName "ScheduledDefrag").State
-        Write-Host "Scheduled defragmentation task found in state: $state"
-    }
-    catch {
-        Write-Host "No scheduled defragmentation task found"
-        exit 0
-    }
-    Write-Host "Unregistering scheduled defragmentation task"
-    Unregister-ScheduledTask -ErrorAction Stop -Confirm:$false -TaskName ScheduledDefrag
-    Write-Host "Scheduled Defragmentation task was cancelled"
-}

coin/pre-provisioning/qtci-windows-10-x86_64/disable-ntp.ps1

@@ -1,4 +0,0 @@
-. "$PSScriptRoot\helpers.ps1"
-
-# Disable the NTP from syncing
-Run-Executable "w32tm.exe" "/config /syncfromflags:NO"

coin/pre-provisioning/qtci-windows-10-x86_64/disable-schedule-tasks.ps1

@@ -1,88 +0,0 @@
-. "$PSScriptRoot\helpers.ps1"
-
-# This script will remove unneeded Tasks from Task Scheduler
-
-# Application Experience 'Microsoft Compatibility Appraiser' - "Collects program telemetry information if opted-in to the Microsoft Customer Experience Improvement Program."
-DisableSchedulerTask "Application Experience\Microsoft Compatibility Appraiser"
-
-# Application Experience 'ProgramDataUpdater' - "Collects program telemetry information if opted-in to the Microsoft Customer Experience Improvement Program"
-DisableSchedulerTask "Application Experience\ProgramDataUpdater"
-
-# Autochk 'Proxy' - "This task collects and uploads autochk SQM data if opted-in to the Microsoft Customer Experience Improvement Program."
-DisableSchedulerTask "Autochk\Proxy"
-
-# Chkdsk 'ProactiveScan' - "NTFS Volume Health Scan"
-DisableSchedulerTask "Chkdsk\ProactiveScan"
-
-# Chkdsk 'SyspartRepair'
-DeleteSchedulerTask "Chkdsk\SyspartRepair"
-
-# Customer Experience Improvement Program 'Consolidator' - "If the user has consented to participate in the Windows Customer Experience Improvement Program, this job collects and sends usage data to Microsoft."
-DisableSchedulerTask "Customer Experience Improvement Program\Consolidator"
-
-# Customer Experience Improvement Program 'sbCeip' - "The USB CEIP (Customer Experience Improvement Program) task collects Universal Serial Bus related statistics and information about your machine and sends it to the Windows Device Connectivity engineering group at Microsoft.  The information received is used to help improve the reliability, stability, and overall functionality of USB in Windows.  If the user has not consented to participate in Windows CEIP, this task does not do anything."
-DisableSchedulerTask "Customer Experience Improvement Program\UsbCeip"
-
-# Device Information 'Device'
-DisableSchedulerTask "Device Information\Device"
-
-# Diagnosis 'Scheduled' - "The Windows Scheduled Maintenance Task performs periodic maintenance of the computer system by fixing problems automatically or reporting them through Security and Maintenance."
-DisableSchedulerTask "Diagnosis\Scheduled"
-
-# DiskDiagnostic 'Microsoft-Windows-DiskDiagnosticDataCollector' - "The Windows Disk Diagnostic reports general disk and system information to Microsoft for users participating in the Customer Experience Program."
-DisableSchedulerTask "DiskDiagnostic\Microsoft-Windows-DiskDiagnosticDataCollector"
-
-# ExploitGuard 'ExploitGuard MDM policy Refresh' - "Task for applying changes to the machine's Exploit Protection settings."
-DisableSchedulerTask "ExploitGuard\ExploitGuard MDM policy Refresh"
-
-# Feedback/Siuf 'DmClient'
-DisableSchedulerTask "Feedback\Siuf\DmClient"
-
-# Feedback/Siuf 'DmClient'OnScenarioDownload'
-DisableSchedulerTask "Feedback\Siuf\DmClientOnScenarioDownload"
-
-# File Classification Infrastructure 'Property Definition Sync'
-DisableSchedulerTask "File Classification Infrastructure\Property Definition Sync"
-
-# InstallService 'ScanForUpdates'
-DisableSchedulerTask "InstallService\ScanForUpdates"
-
-# InstallService 'ScanForUpdatesAsUser'
-DisableSchedulerTask "InstallService\ScanForUpdatesAsUser"
-
-# LanguageComponentsInstaller  'Installation' - "Install language components that match the user's language list."
-DisableSchedulerTask "LanguageComponentsInstaller\Installation"
-
-# LanguageComponentsInstaller 'ReconcileLanguageResources' - "Install language components that match the user's language list."
-DisableSchedulerTask "LanguageComponentsInstaller\ReconcileLanguageResources"
-
-# PI 'Secure-Boot-Update' - "This task updates the Secure Boot variables."
-DisableSchedulerTask "PI\Secure-Boot-Update"
-
-# PI 'Sqm-Tasks' - "This task gathers information about the Trusted Platform Module (TPM), Secure Boot, and Measured Boot."
-DisableSchedulerTask "PI\Sqm-Tasks"
-
-# Power Efficiency Diagnotics 'AnalyzeSystem' - "This task analyzes the system looking for conditions that may cause high energy use."
-DisableSchedulerTask "PushToInstall\Registration"
-
-# Servicing 'StartComponentCleanup'
-DisableSchedulerTask "Servicing\StartComponentCleanup"
-
-# SettingSync 'BackgroundUploadTask'
-DeleteSchedulerTask "SettingSync\BackgroundUploadTask"
-
-# SoftwareProtectionPlatform 'SvcRestartTask' - "This task restarts the Software Protection Platform service at the specified time"
-DeleteSchedulerTask "SoftwareProtectionPlatform\SvcRestartTask"
-
-# SoftwareProtectionPlatform 'SvcRestartTaskLogon' - "This task restarts the Software Protection Platform service at the specified time"
-DisableSchedulerTask "SoftwareProtectionPlatform\SvcRestartTaskLogon"
-
-# SoftwareProtectionPlatform 'SvcRestartTaskNetwork' - "This task restarts the Software Protection Platform service when a new network is detected"
-DisableSchedulerTask "SoftwareProtectionPlatform\SvcRestartTaskNetwork"
-
-# UNP 'RunUpdateNotificationMgr'
-DeleteSchedulerTask "UNP\RunUpdateNotificationMgr"
-
-
-
-

coin/pre-provisioning/qtci-windows-10-x86_64/disable-update-orchestrator.ps1

@@ -1,16 +0,0 @@
-# Disable UpdateOrchestrator
-
-$name = "UpdateOrchestrator"
-$path = "C:\Windows\System32\Tasks\Microsoft\Windows\$name"
-
-takeown /F $path /A /R
-icacls $path /grant Administrators:F /T
-SCHTASKS /Change /TN "Microsoft\Windows\$name\Reboot" /DISABLE
-del "$path\Schedule Scan"
-del "$path\Schedule Scan Static Task"
-del "$path\Backup Scan"
-del "$path\UpdateModelTask"
-del "$path\USO_UxBroker"
-
-# Disable Update orchestrator service
-reg.exe ADD "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UsoSvc" /V Start /T REG_dWORD /D 4 /F

coin/pre-provisioning/qtci-windows-10-x86_64/disable-windefender.ps1

@@ -1,59 +0,0 @@
-###########################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# Turning off win defender.
-#
-# If disabled manually, windows will automatically enable it after
-# some period of time. Disabling it speeds up the builds.
-
-. "$PSScriptRoot\helpers.ps1"
-
-Run-Executable "reg.exe" "ADD `"HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender`" /V DisableAntiSpyware /T REG_dWORD /D 1 /F"
-
-# 'Windows Defender Cache Maintenance' - "Periodic maintenance task."
-DisableSchedulerTask "Windows Defender\Windows Defender Cache Maintenance"
-
-# 'Windows Defender Cleanup' - "Periodic cleanup task."
-DisableSchedulerTask "Windows Defender\Windows Defender Cleanup"
-
-# 'Windows Defender Scheduled Scan' - "Periodic scan task."
-DisableSchedulerTask "Windows Defender\Windows Defender Scheduled Scan"
-
-# 'Windows Defender Verification' - "Periodic verification task."
-DisableSchedulerTask "Windows Defender\Windows Defender Verification"
-
-# Disable 'QueueReporting' - "Windows Error Reporting task to process queued reports."
-DisableSchedulerTask "Windows Error Reporting\QueueReporting"
-
-# Disable WindowsUpdate from Task Scheduler
-DisableSchedulerTask "WindowsUpdate\Scheduled Start"

coin/pre-provisioning/qtci-windows-10-x86_64/disable-windows-file-protector.ps1

@@ -1,4 +0,0 @@
-# Disable Windows File Protection
-# Windows File Protection feature in Microsoft Windows prevents programs from replacing critical Windows system files.
-
-reg.exe ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /V SFCDisable /T REG_dWORD /D 0xffffff9d /F

coin/pre-provisioning/qtci-windows-10-x86_64/disable-windows-update-medic.ps1

@@ -1,25 +0,0 @@
-# Windows Update Medic Service (WaaSMedicSvc)'PerformRemediation' helps recover update-related services to the supported configuration.
-# WaasMedicSvc keeps re-starting Windows Update, even if it disabled manually.
-# Even Admin user don't have privileged to disable PerformRemediation from Task Scheduler which means that WaaSMedicSvc.dll need's to be removed from the system
-
-$limit = (Get-Date).AddMinutes(20)
-$path = "C:\Windows\System32\WaaSMedicSvc.dll"
-
-DO {
-    takeown /F $path
-    icacls  $path /grant Administrators:f
-    Write-host "Deleting $path"
-
-    Try {
-        del $path
-    }
-    Catch [System.UnauthorizedAccessException] {
-        Write-host "Access to the path '$path' is denied."
-        Continue
-    }
-
-    if ((Get-Date) -gt $limit) {
-        exit 1
-    }
-
-}while (Test-Path -Path "$path")

coin/pre-provisioning/qtci-windows-10-x86_64/disable-windows-updates.ps1

@@ -1,54 +0,0 @@
-############################################################################
-##
-## Copyright (C) 2017 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script disables the automatic Windows updates
-
-$service = get-service wuauserv
-if (-not $service) {
-    Write-Host "Windows Update service not found."
-    exit 0
-}
-
-if ($service.Status -eq "Stopped") {
-    Write-Host "Windows Update service already stopped."
-} else {
-    Write-Host "Stopping Windows Update service."
-    Stop-Service -Name "wuauserv" -Force
-}
-
-$startup = Get-WmiObject Win32_Service | Where-Object {$_.Name -eq "wuauserv"} | Select -ExpandProperty "StartMode"
-if ($startup -ne "Disabled") {
-    set-service wuauserv -startup disabled
-} else {
-    Write-Host "Windows Update service startup already disabled."
-}

coin/pre-provisioning/qtci-windows-10-x86_64/msvc2017.ps1

@@ -34,8 +34,7 @@
 # Visual Studio $version version $version_number was installed manually using $installer.
 
 $version = "2017"
-# Current version was manually upgraded from the installer
-$version_number = "15.9.16"
+$version_number = "15.8.5"
 $installer = "http://ci-files01-hki.ci.local/input/windows/vs_professional__1312218103.1526017942.exe"
 
 # Following components were selected from installer:

coin/pre-provisioning/qtci-windows-10-x86_64/msvc2019.ps1

@@ -1,91 +0,0 @@
-############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# Visual Studio $version version $version_number was installed manually using $installer.
-
-$version = "2019"
-# Current version was manually upgraded from the installer
-$version_number = "16.3.2"
-$installer = "http://ci-files01-hki.ci.local/input/windows/vs_professional__505064367.1547034421.exe"
-
-.NET Framework 4.5 targeting pack
-.NET Framework 4.5.1 targeting pack
-.NET Framework 4.5.2 targeting pack
-.NET Framework 4.6.1 SDK
-.NET Framework 4.6.1 targeting pack
-.NET Framework 4.6.2 SDK
-.NET Framework 4.6.2 targeting pack
-.NET Framework 4.7.2 SDK
-.NET Framework 4.7.2 targeting pack
-.NET Native
-.NET Portable Library targeting pack
-CLR data typer for SQL Sever
-Connectivity and publishing tools
-Data sources for SQL Server support
-SQL ADAL runtime
-SQL Server Command Linne Utilities
-SQL Server Data Tools
-SQL Server Express 2016 LocalDB
-SQL Server ODBC Driver
-ClickOnce Publishing
-Developer Analytics tools
-NuGet package manager
-Text Template Transformation
-C# and Visual Basic Roslyn compilers
-C++ 2019 Redistributable Update
-C++ Cmake tools for Windows
-C++/CLI support for v142 build tools
-MSBuild
-MSVC v142 - VS 2019 C++ ARM build tools (v14.20)
-MSVC v142 - VS 2019 C++ ARM64 build tools (v14.20)
-MSVC v142 - VS 2019 C++ x64/x86 build tools (v14.20)
-.NET profiling tools
-C++ profiling tools
-JavaScript diagnostics
-Just-In-Time debugger
-C# and Visual Basic
-C++ core features
-JavaSript and TypeScript language support
-Razor Language Services
-Graphics debugger and GPU profiler for DirectX
-Image and 3D model editors
-C++ ATL for v142 build tools (x86 & x64)
-TypeScript 3.3 SDK
-Windows 10 SDK (10.0.16299.0)
-Windows 10 SDK (10.0.17134.0)
-Windows 10 SDK (10.0.17763.0)
-Windows 10 SDK (10.0.18362.0)
-
-# NOTE! Work loads were added during installation!
-
-echo "Visual Studio = $version version version_number" >> ~\versions.txt

coin/provisioning/common/linux/android_linux.sh

@@ -80,22 +80,14 @@ else
     sudo chown -R qt:users "$targetFolder"
 fi
 
-# Run the following command under `eval` or `sh -c` so that the shell properly splits it
-sdkmanager_no_progress_bar_cmd="tr '\r' '\n'  |  grep -v '^\[[ =]*\]'"
-
 echo "Running SDK manager for platforms;$sdkApiLevel, platform-tools and build-tools;$sdkBuildToolsVersion."
 # shellcheck disable=SC2031
 if [ "$http_proxy" != "" ]; then
     proxy_host=$(echo "$proxy" | cut -d'/' -f3 | cut -d':' -f1)
     proxy_port=$(echo "$proxy" | cut -d':' -f3)
-    echo "y" | "$sdkTargetFolder/tools/bin/sdkmanager"  \
-                   --no_https --proxy=http --proxy_host="$proxy_host" --proxy_port="$proxy_port"  \
-                   "platforms;$sdkApiLevel" "platform-tools" "build-tools;$sdkBuildToolsVersion"  \
-        | eval $sdkmanager_no_progress_bar_cmd
+    echo "y" |"$sdkTargetFolder/tools/bin/sdkmanager" --no_https --proxy=http --proxy_host="$proxy_host" --proxy_port="$proxy_port" "platforms;$sdkApiLevel" "platform-tools" "build-tools;$sdkBuildToolsVersion"
 else
-    echo "y" | "$sdkTargetFolder/tools/bin/sdkmanager"  \
-                   "platforms;$sdkApiLevel" "platform-tools" "build-tools;$sdkBuildToolsVersion"  \
-        | eval $sdkmanager_no_progress_bar_cmd
+    echo "y" |"$sdkTargetFolder/tools/bin/sdkmanager" "platforms;$sdkApiLevel" "platform-tools" "build-tools;$sdkBuildToolsVersion"
 fi
 
 echo "Checking the contents of Android SDK..."
@@ -114,11 +106,8 @@ echo "Android SDK API level = $sdkApiLevel" >> ~/versions.txt
 echo "Android NDK = $ndkVersion" >> ~/versions.txt
 
 cd "$sdkTargetFolder/tools/bin"
-./sdkmanager --install "emulator"  \
-    | eval $sdkmanager_no_progress_bar_cmd
-echo "y" | ./sdkmanager --install "system-images;android-21;google_apis;x86"  \
-    | eval $sdkmanager_no_progress_bar_cmd
-
+./sdkmanager --install "emulator"
+echo "y" | ./sdkmanager --install "system-images;android-21;google_apis;x86"
 
 echo "Checking the contents of Android SDK again..."
 ls -l "$sdkTargetFolder"

coin/provisioning/common/linux/cmake_linux.sh

@@ -33,7 +33,7 @@
 ##
 #############################################################################
 
-# This script installs CMake 3.7.2
+# This script installs CMake 3.6.2
 
 # CMake is needed for autotests that verify that Qt can be built with CMake
 
@@ -42,10 +42,10 @@ source "${BASH_SOURCE%/*}/../unix/InstallFromCompressedFileFromURL.sh"
 # shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
-version="3.7.2"
-PrimaryUrl="http://ci-files01-hki.intra.qt.io/input/cmake/cmake-3.7.2-Linux-x86_64.tar.gz"
-AltUrl="https://cmake.org/files/v3.7/cmake-3.7.2-Linux-x86_64.tar.gz"
-SHA1="915bc981aab354821fb9fd28374a720fdb3aa180"
+version="3.6.2"
+PrimaryUrl="http://ci-files01-hki.intra.qt.io/input/cmake/cmake-3.6.2-Linux-x86_64.tar.gz"
+AltUrl="https://cmake.org/files/v3.6/cmake-3.6.2-Linux-x86_64.tar.gz"
+SHA1="dd9d8d57b66109d4bac6eef9209beb94608a185c"
 targetFolder="/opt/cmake-$version"
 appPrefix="cmake-$version-Linux-x86_64"
 

coin/provisioning/common/linux/devel_languages_go.SUSE_repo_key.pub

@@ -1,19 +0,0 @@
------BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1.4.5 (GNU/Linux)
-
-mQGiBEyvJq8RBAD64FtKbU3VFsZ4PAzcSi9rETc1qXZLVQYtrE38niriIJUuT/tC
-kxGjkduD7ozP6rxL+M8fk9UdbbmzhHhXzQT2blyYy2iwpZP5+AFeQawz+oyMRVze
-x6IY5qO31TiRu+aEBptk6nco4DULlKABlvtjKI+gJ4buJm+TumyrPaxe9wCgpFwl
-O0fEjpOfQd+6Du0sCnPX7+8D/3xYVj9q5ILmrJ9zehBKjRYEcaP0rZVqudH51FUS
-I0LQNHsJdzKLzhT+Zj7TJU4KnCN4sX7amfYL3GT9qyZEBDx2alubvEsI36wtNq0i
-ewU4XmyZ+Rd7Q4mAPNoBGe5DsUA8wn/7iHGg9aJHu+GXvH7T3DVoUxW5W2KqPw+h
-jzqGBACWGuuCefa683uf6aKqpTS3JB+01BDPf+sG9qJ+k7xcJOsEiXIe1X5vH9ov
-kEvTM12kzY7SGwlsFsTDT1xioDl62g5nPlZMXErUBVnjoMtjl9bDwUPJY/vP1S9M
-VaONBMoJEON3HRui9jhdEK25LTdrcFlFpRzJI3AgdXwy8aQyiLRGZGV2ZWw6bGFu
-Z3VhZ2VzOmdvIE9CUyBQcm9qZWN0IDxkZXZlbDpsYW5ndWFnZXM6Z29AYnVpbGQu
-b3BlbnN1c2Uub3JnPohmBBMRAgAmBQJc9DoCAhsDBQkUY8NTBgsJCAcDAgQVAggD
-BBYCAwECHgECF4AACgkQr0z+TTB9e/lQZgCfXIjj30HyCPvUbSbSd6zOS0seAegA
-n3DXayMpRphNmyJgLvl5qKfsX7f6iEYEExECAAYFAkyvJq8ACgkQOzARt2udZSOg
-qQCeOba7kjk7CI+64GOkhhTGSdjnjdQAn2IC5tx+PW38XKwl3Jr5YVp0RyR0
-=AOj6
------END PGP PUBLIC KEY BLOCK-----

coin/provisioning/common/linux/disable-notifications.sh

@@ -1,4 +1,4 @@
 #!/usr/bin/env bash
 
-gsettings set org.gnome.desktop.notifications.application:/update-manager/ enable false
-gsettings set org.gnome.desktop.notifications show-banners false
+sudo gsettings set org.gnome.desktop.notifications.application:/update-manager/ enable false
+sudo gsettings set org.gnome.desktop.notifications show-banners false

coin/provisioning/common/linux/disable-ntp_linux.sh

@@ -41,8 +41,6 @@ if uname -a |grep -q "Ubuntu"; then
     sudo timedatectl set-ntp false
 elif cat /etc/os-release | grep "PRETTY_NAME" | grep -q "Leap 15"; then
     (sudo systemctl stop chronyd && sudo systemctl disable chronyd)
-elif cat /etc/os-release |grep "SUSE Linux Enterprise Server 15"; then
-    sudo timedatectl set-ntp false
 else
-    sudo systemctl disable ntpd || sudo /sbin/chkconfig ntpd off
+    (systemctl &>/dev/null && sudo systemctl disable ntpd) || sudo /sbin/chkconfig ntpd off
 fi

coin/provisioning/common/linux/docker.sh

@@ -33,40 +33,21 @@
 ##
 #############################################################################
 
-set -e
-
-
-. $(dirname "$0")/../../common/unix/DownloadURL.sh
-
-
-localRepo=http://ci-files01-hki.intra.qt.io/input/docker
-upstreamRepo=https://download.docker.com/linux/ubuntu/dists/bionic/pool/stable/amd64
-
-echo '
-    f4c941807310e3fa470dddfb068d599174a3daec containerd.io_1.2.10-3_amd64.deb
-    ee640d9258fd4d3f4c7017ab2a71da63cbbead55 docker-ce_19.03.4~3-0~ubuntu-bionic_amd64.deb
-    09402bf5dac40f0c50f1071b17f38f6584a42ad1 docker-ce-cli_19.03.4~3-0~ubuntu-bionic_amd64.deb
-' \
-    | xargs -n2 | while read  sha f
-do
-    DownloadURL  $localRepo/$f  $upstreamRepo/$f  $sha
-done
-
-sudo apt-get -y install  ./containerd.io*.deb ./docker-ce*.deb ./docker-ce-cli*.deb
-rm -f                    ./containerd.io*.deb ./docker-ce*.deb ./docker-ce-cli*.deb
+set -ex
 
+# Download and install the docker engine.
+sudo apt-get install curl -y
+curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
+sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
+sudo apt-get update
+sudo apt-get install docker-ce -y
 sudo usermod -a -G docker $USER
 sudo docker --version
 
-# Download and install the docker-compose extension from https://github.com/docker/compose/releases
-f=docker-compose-$(uname -s)-$(uname -m)
-DownloadURL  \
-    $localRepo/$f  \
-    https://github.com/docker/compose/releases/download/1.24.1/$f \
-    cfb3439956216b1248308141f7193776fcf4b9c9b49cbbe2fb07885678e2bb8a
-sudo install -m 755 ./docker-compose* /usr/local/bin/docker-compose
+# Download and install the docker-compose extension.
+sudo curl -L https://github.com/docker/compose/releases/download/1.21.0/docker-compose-$(uname -s)-$(uname -m) -o /usr/local/bin/docker-compose
+sudo chmod +x /usr/local/bin/docker-compose
 sudo docker-compose --version
-rm ./docker-compose*
 
 # Install Avahi to discover Docker containers in the test network
 sudo apt-get install avahi-daemon -y

coin/provisioning/common/linux/openssl_for_android_linux.sh

@@ -53,11 +53,11 @@ else
     rm -rf "$exports_file"
 fi
 
-version="1.1.1d"
+version="1.1.1b"
 officialUrl="https://www.openssl.org/source/openssl-$version.tar.gz"
 cachedUrl="http://ci-files01-hki.intra.qt.io/input/openssl/openssl-$version.tar.gz"
 targetFile="/tmp/openssl-$version.tar.gz"
-sha="056057782325134b76d1931c48f2c7e6595d7ef4"
+sha="e9710abf5e95c48ebf47991b10cbb48c09dae102"
 opensslHome="${HOME}/openssl/android/openssl-${version}"
 DownloadURL "$cachedUrl" "$officialUrl" "$sha" "$targetFile"
 mkdir -p "${HOME}/openssl/android/"

coin/provisioning/common/linux/qnx_660.sh

@@ -49,7 +49,7 @@ echo "$sha1  $targetFile" | sha1sum --check
 if [ ! -d "$targetFolder" ]; then
     mkdir -p $targetFolder
 fi
-sudo tar -C $targetFolder -xzf $targetFile
+sudo tar -C $targetFolder -xvzf $targetFile
 sudo chown -R qt:users "$targetFolder"/"$folderName"
 
 # Verify that we have last file in tar

coin/provisioning/common/linux/remove-update_notifier.sh

@@ -1,3 +1,3 @@
 #!/usr/bin/env bash
 
-sudo apt -q -y remove update-notifier update-manager python3-distupgrade python3-update-manager ubuntu-release-upgrader-core update-manager-core
+sudo apt -q -y remove update-notifier update-manager

coin/provisioning/common/linux/telegraf-coin.conf

@@ -1,47 +0,0 @@
-[global_tags]
-[agent]
-  interval = "10s"
-  round_interval = true
-  metric_batch_size = 100
-  metric_buffer_limit = 10000
-  collection_jitter = "0s"
-  flush_interval = "10s"
-  flush_jitter = "5s"
-  precision = ""
-  logfile = "/var/log/telegraf-coin.log"
-  hostname = "$COIN_UNIQUE_JOB_ID"
-  omit_hostname = false
-[[outputs.influxdb]]
-  urls= ["https://qtinfluxdb01.intra.qt.io:8086"]
-  insecure_skip_verify = true
-  database = "coin_vms"
-  skip_database_creation = true
-  username = "coin_vms_writer"
-  password = "COIN_VMS_WRITER_PASS"
-[[inputs.cpu]]
-  percpu = true
-  totalcpu = true
-  collect_cpu_time = false
-  report_active = false
-[[inputs.disk]]
-  ignore_fs = ["tmpfs", "devtmpfs", "devfs", "iso9660", "overlay", "aufs", "squashfs"]
-[[inputs.diskio]]
-[[inputs.kernel]]
-[[inputs.mem]]
-[[inputs.processes]]
-[[inputs.swap]]
-[[inputs.system]]
-[[inputs.kernel_vmstat]]        # linux-only
-[[inputs.netstat]]
-
-
-# Monitor Coin process
-[[inputs.procstat]]
-  exe = "coin-"
-  pid_finder = "native"
-
-
-# Monitor I/O latency
-[[inputs.exec]]
-  data_format = "influx"
-  commands = [ "/usr/bin/telegraf-ioping.sh /" ]

coin/provisioning/common/macos/homebrew.sh

@@ -1,12 +1,3 @@
 #!/usr/bin/env bash
-
-
-# Will install homebrew package manager for macOS.
-#     WARNING: Requires commandlinetools
-
-# TODO audit and cache this file locally, see QTQAINFRA-3134
-curl -L -o /tmp/homebrew_install  https://raw.githubusercontent.com/Homebrew/install/master/install
-
-/usr/bin/ruby /tmp/homebrew_install  </dev/null
-
-brew update
+# Will install homebrew package manager for macOS
+/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" </dev/null

coin/provisioning/common/macos/increase_limits.sh

@@ -1,70 +0,0 @@
-#!/bin/sh
-
-#############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-
-# Increase the soft and hard RLIMIT_NOFILE and RLIMIT_NPROC limits.
-# By default they are 256/unlimited and 709/1064
-# and they sometimes create problems to the build process and telegraf.
-
-
-set -e
-
-PROVISIONING_DIR="$(dirname "$0")/../../"
-. "$PROVISIONING_DIR"/common/unix/common.sourced.sh
-
-
-echo "Current limits are:"
-ulimit -a
-launchctl limit
-
-$CMD_INSTALL -m 644 -o root -g wheel  \
-    $PROVISIONING_DIR/common/macos/limit.maxfiles.plist  \
-    $PROVISIONING_DIR/common/macos/limit.maxproc.plist   \
-    /Library/LaunchDaemons/
-
-# Activate the new limits immediately (not for the current session though)
-sudo launchctl load -w /Library/LaunchDaemons/limit.maxfiles.plist
-sudo launchctl load -w /Library/LaunchDaemons/limit.maxproc.plist
-
-echo "After adjusting, limits are:"
-ulimit -a
-launchctl limit
-
-
-# NOTE: If the limits are not increased enough, it might be because of
-# restrictions set by the kernel. They can be temporarily altered with:
-
-# sudo sysctl -w kern.maxproc=xxxx
-# sudo sysctl -w kern.maxprocperuid=xxx

coin/provisioning/common/macos/install-commandlinetools.sh

@@ -50,7 +50,7 @@ function InstallCommandLineTools {
     hdiutil attach "/tmp/$packageName"
     cd "/Volumes/Command Line Developer Tools"
     echo "Installing"
-    sudo installer -pkg ./*.pkg -target / -allowUntrusted
+    sudo installer -verbose -pkg ./*.pkg -target /
     cd /
     # Let's fait for 5 second before unmounting. Sometimes resource is busy and cant be unmounted
     sleep 3

coin/provisioning/common/macos/install_openssl_111a.sh

@@ -0,0 +1,78 @@
+#!/usr/bin/env bash
+
+#############################################################################
+##
+## Copyright (C) 2019 The Qt Company Ltd.
+## Contact: http://www.qt.io/licensing/
+##
+## This file is part of the provisioning scripts of the Qt Toolkit.
+##
+## $QT_BEGIN_LICENSE:LGPL21$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and The Qt Company. For licensing terms
+## and conditions see http://www.qt.io/terms-conditions. For further
+## information use the contact form at http://www.qt.io/contact-us.
+##
+## GNU Lesser General Public License Usage
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 or version 3 as published by the Free
+## Software Foundation and appearing in the file LICENSE.LGPLv21 and
+## LICENSE.LGPLv3 included in the packaging of this file. Please review the
+## following information to ensure the GNU Lesser General Public License
+## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
+## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+##
+## As a special exception, The Qt Company gives you certain additional
+## rights. These rights are described in The Qt Company LGPL Exception
+## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+##
+## $QT_END_LICENSE$
+##
+#############################################################################
+
+# This script install OpenSSL
+
+set -ex
+
+# shellcheck source=../unix/InstallFromCompressedFileFromURL.sh
+source "${BASH_SOURCE%/*}/../unix/InstallFromCompressedFileFromURL.sh"
+# shellcheck source=../unix/SetEnvVar.sh
+source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
+
+opensslVersion="1.1.1a"
+opensslFile="openssl-$opensslVersion.tar.gz"
+opensslDlUrl="http://ci-files01-hki.intra.qt.io/input/openssl/$opensslFile"
+opensslAltDlUrl="https://www.openssl.org/source/$opensslFile"
+opensslSha1="8fae27b4f34445a5500c9dc50ae66b4d6472ce29"
+
+# Below target location has been hard coded into Coin.
+# QTQAINFRA-1195
+openssl_install_dir=/usr/local/openssl-$opensslVersion
+opensslTargetLocation="/usr/local/opt/openssl"
+
+InstallFromCompressedFileFromURL "$opensslDlUrl" "$opensslAltDlUrl" "$opensslSha1" "/tmp/openssl-$opensslVersion" "openssl-$opensslVersion"
+cd "/tmp/openssl-$opensslVersion"
+sudo ./Configure --prefix=$openssl_install_dir shared no-ssl3-method enable-ec_nistp_64_gcc_128 darwin64-x86_64-cc "-Wa,--noexecstack"
+
+sudo make install_sw install_ssldirs
+
+path=$(echo "$opensslTargetLocation" | sed -E 's/(.*)\/.*$/\1/')
+sudo mkdir -p "$path"
+sudo ln -s $openssl_install_dir $opensslTargetLocation
+
+SetEnvVar "PATH" "\"$opensslTargetLocation/bin:\$PATH\""
+SetEnvVar "MANPATH" "\"$opensslTargetLocation/share/man:\$MANPATH\""
+
+SetEnvVar "OPENSSL_DIR" "\"$openssl_install_dir\""
+SetEnvVar "OPENSSL_INCLUDE" "\"$openssl_install_dir/include\""
+SetEnvVar "OPENSSL_LIB" "\"$openssl_install_dir/lib\""
+
+security find-certificate -a -p /Library/Keychains/System.keychain | sudo tee -a $opensslTargetLocation/ssl/cert.pem > /dev/null
+security find-certificate -a -p /System/Library/Keychains/SystemRootCertificates.keychain | sudo tee -a $opensslTargetLocation/ssl/cert.pem > /dev/null
+
+sudo rm -rf /tmp/openssl-$opensslVersion
+
+echo "OpenSSL = $opensslVersion" >> ~/versions.txt

coin/provisioning/common/macos/libiodbc.rb

@@ -1,23 +0,0 @@
-class Libiodbc < Formula
-  desc "Database connectivity layer based on ODBC. (alternative to unixodbc)"
-  homepage "http://www.iodbc.org/dataspace/iodbc/wiki/iODBC/"
-  url "https://github.com/openlink/iODBC/archive/v3.52.12.tar.gz"
-  sha256 "b2cab4f8fbd5388344d7ee0deb1a32310795b1e631c3505a5b515d90186e2516"
-
-  depends_on "autoconf" => :build
-  depends_on "automake" => :build
-  depends_on "libtool" => :build
-
-  conflicts_with "unixodbc", :because => "both install 'odbcinst.h' header"
-
-  def install
-    system "./autogen.sh"
-    system "./configure", "--prefix=#{prefix}"
-    system "make", "install"
-  end
-
-  test do
-    system bin/"iodbc-config", "--version"
-  end
-end
-

coin/provisioning/common/macos/libiodbc.sh

@@ -40,7 +40,8 @@ set -ex
 # shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
-brew install ${BASH_SOURCE%/*}/libiodbc.rb
+brew update
+brew install libiodbc
 
 # CPLUS_INCLUDE_PATH is set so clang and configure can find libiodbc
 

coin/provisioning/common/macos/limit.maxfiles.plist

@@ -1,20 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
-<plist version="1.0">
-  <dict>
-    <key>Label</key>
-      <string>limit.maxfiles</string>
-    <key>ProgramArguments</key>
-      <array>
-        <string>launchctl</string>
-        <string>limit</string>
-        <string>maxfiles</string>
-        <string>65536</string>
-        <string>524288</string>
-      </array>
-    <key>RunAtLoad</key>
-      <true/>
-    <key>ServiceIPC</key>
-      <false/>
-  </dict>
-</plist>

coin/provisioning/common/macos/limit.maxproc.plist

@@ -1,20 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
-<plist version="1.0">
-  <dict>
-    <key>Label</key>
-      <string>limit.maxproc</string>
-    <key>ProgramArguments</key>
-      <array>
-        <string>launchctl</string>
-        <string>limit</string>
-        <string>maxproc</string>
-        <string>8192</string>
-        <string>32768</string>
-      </array>
-    <key>RunAtLoad</key>
-      <true/>
-    <key>ServiceIPC</key>
-      <false/>
-  </dict>
-</plist>

coin/provisioning/common/macos/telegraf-coin.conf

@@ -1,51 +0,0 @@
-[global_tags]
-[agent]
-  interval = "10s"
-  round_interval = true
-  metric_batch_size = 100
-  metric_buffer_limit = 10000
-  collection_jitter = "0s"
-  flush_interval = "10s"
-  flush_jitter = "5s"
-  precision = ""
-  logfile = "/var/log/telegraf-coin.log"
-  hostname = "$COIN_UNIQUE_JOB_ID"
-  omit_hostname = false
-[[outputs.influxdb]]
-  urls= ["https://qtinfluxdb01.intra.qt.io:8086"]
-  insecure_skip_verify = true
-  database = "coin_vms"
-  skip_database_creation = true
-  username = "coin_vms_writer"
-  password = "COIN_VMS_WRITER_PASS"
-#[[inputs.cpu]]    # linux-only
-#  percpu = true
-#  totalcpu = true
-#  collect_cpu_time = false
-#  report_active = false
-[[inputs.disk]]
-  ignore_fs = ["tmpfs", "devtmpfs", "devfs", "iso9660", "overlay", "aufs", "squashfs"]
-#[[inputs.diskio]]    # linux-only
-[[inputs.kernel]]
-[[inputs.mem]]
-[[inputs.processes]]
-[[inputs.swap]]
-[[inputs.system]]
-#[[inputs.kernel_vmstat]]        # linux-only
-[[inputs.netstat]]
-
-
-# Monitor Coin process
-[[inputs.procstat]]
-  exe = "coin-"
-  # Buggy on macOS if using the "native" pid_finder, see:
-  #    https://github.com/influxdata/telegraf/issues/6265
-  # Tested 1.12.1 version that "native" pid_finder has been fixed,
-  # but it is slow and times out frequently
-  pid_finder = "pgrep"
-
-
-# Monitor I/O latency
-[[inputs.exec]]
-  data_format = "influx"
-  commands = [ "/usr/bin/telegraf-ioping.sh /" ]

coin/provisioning/common/shared/telegraf/influxdb.repo_key.pub

@@ -1,52 +0,0 @@
------BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1
-
-mQINBFYJmwQBEADCw7mob8Vzk+DmkYyiv0dTU/xgoSlp4SQwrTzat8MB8jxmx60l
-QjmhqEyuB8ho4zzZF9KV+gJWrG6Rj4t69JMTJWM7jFz+0B1PC7kJfNM+VcBmkTnj
-fP+KJjqz50ETnsF0kQTG++UJeRYjG1dDK0JQNQJAM6NQpIWJI339lcDf15vzrMnb
-OgIlNxV6j1ZZqkle4fvScF1NQxYScRiL+sRgVx92SI4SyD/xZnVGD/szB+4OCzah
-+0Q/MnNGV6TtN0RiCDZjIUYiHoeT9iQXEONKf7T62T4zUafO734HyqGvht93MLVU
-GQAeuyx0ikGsULfOsJfBmb3XJS9u+16v7oPFt5WIbeyyNuhUu0ocK/PKt5sPYR4u
-ouPq6Ls3RY3BGCH9DpokcYsdalo51NMrMdnYwdkeq9MEpsEKrKIN5ke7fk4weamJ
-BiLI/bTcfM7Fy5r4ghdI9Ksw/ULXLm4GNabkIOSfT7UjTzcBDOvWfKRBLX4qvsx4
-YzA5kR+nX85u6I7W10aSqBiaLqk6vCj0QmBmCjlSeYqNQqSzH/6OoL6FZ7lP6AiG
-F2NyGveJKjugoXlreLEhOYp20F81PNwlRBCAlMC2Q9mpcFu0dtAriVoG4gVDdYn5
-t+BiGfD2rJlCinYLgYBDpTPcdRT3VKHWqL9fcC4HKmic0mwWg9homx550wARAQAB
-tDFJbmZsdXhEQiBQYWNrYWdpbmcgU2VydmljZSA8c3VwcG9ydEBpbmZsdXhkYi5j
-b20+iQI3BBMBCgAhBQJWCZsEAhsDBQsJCAcDBRUKCQgLBRYDAgEAAh4BAheAAAoJ
-EGhKFM8lguDF9XEQAK9rREnZt6ujh7GXfeNki35bkn39q8GYh0mouShFbFY9o0i3
-UJVChsxokJSRPgFh9GOhOPTupl3rzfdpD+IlWI2Myt6han2HOjZKNZ4RGNrYJ5UR
-uxt4dKMWlMbpkzL56bhHlx97RoXKv2d2zRQfw9nyZb6t3lw2k2kKXsMxjGa0agM+
-2SropwYOXdtkz8UWaGd3LYxwEvW3AuhI8EEEHdLetQaYe9sANDvUEofgFbdsuICH
-9QLmbYavk7wyGTPBKfPBbeyTxwW2rMUnFCNccMKLm1i5NpZYineBtQbX2cfx9Xsk
-1JLOzEBmNal53H2ob0kjev6ufzOD3s8hLu4KMCivbIz4YT3fZyeExn0/0lUtsQ56
-5fCxE983+ygDzKsCnfdXqm3GgjaI90OkNr1y4gWbcd5hicVDv5fD3TD9f0GbpDVw
-yDz8YmvNzxMILt5Glisr6aH7gLG/u8jxy0D8YcBiyv5kfY4vMI2yXHpGg1cn/sVu
-ZB01sU09VVIM2BznnimyAayI430wquxkZCyMx//BqFM1qetIgk1wDZTlFd0n6qtA
-fDmXAC4s5pM5rfM5V57WmPaIqnRIaESJ35tFUFlCHfkfl/N/ribGVDg1z2KDW08r
-96oEiIIiV4GfXl+NprJqpNS3Cn+aCXtd7/TsDScDEgs4sMaR29Lsf26cuWk8uQIN
-BFYJmwQBEADDPi3fmwn6iwkiDcH2E2V31cHlBw9OdJfxKVUdyAQEhTtqmG9P8XFZ
-ERRQF155XLQPLvRlUlq7vEYSROn5J6BAnsjdjsH9LmFMOEV8CIRCRIDePG/Mez2d
-nIK5yiU6GkS3IFaQg2T9/tOBKxm0ZJPfqTXbT4jFSfvYJ3oUqc+AyYxtb8gj1GRk
-X283/86/bA3C98u7re1vPtiDRyM8r0+lhEc59Yx/EAOL+X2gZyTgyUoH+LLuOWQK
-s1egI8y80R8NZfM1nMiQk2ywMsTFwQjSVimScvzqv5Nt8k8CvHUQ3a6R+6doXGNX
-5RnUqn9Qvmh0JY5sNgFsoaGbuk2PJrVaGBRnfnjaDqAlZpDhwkWhcCcguNhRbRHp
-N7/a0pQr70bAG9VikzLyGC17EU0sxney/hyNHkr4Uyy2OXHpuJvRjVKy/BwZ3fxA
-AYX2oZIOxQB3/OulzO/DppaCVhRtp1bt+Z5f+fpisiVb5DvZcMdeyAoQ4+oOr7v3
-EasIs2XYcQ+kOE3Y2kdlHWBeuXzxgWgJZ1OOpwGMjR3Uy6IwhuSWtreJBA4er+Df
-vgSPwKBsRLNLbPe3ftjArnC5GfMiGgikVdAUdN4OkEqvUbkRoAVGKTOMLUKm+ZkG
-OskJOVYS+JAina0qkYEFF7haycMjf9olhqLmTIC+6X7Ox9R2plaOhQARAQABiQIf
-BBgBCgAJBQJWCZsEAhsMAAoJEGhKFM8lguDF8ZIP/1q9Sdz8oMvf9AJXZ7AYxm77
-V+kJzJqi62nZLWJnrFXDZJpU+LkYlb3fstsZ1rvBhnrEPSmFxoj72CP0RtcyX7wJ
-dA7K1Fl9LpJi5H8300cC7UyG94MUYbrXijbLTbnFTfNr1tGx4a1T/7Yyxx/wZGrT
-H/X8cvNybkl33SxDdlQQ9kx3lFOwC41e3TkGsUWxn3TCfvDh8VdA6Py6JeSPFGOb
-MEO2/q7oUgvjfV+ivN5ayZi9bWgeqm1sgtmTHHQ4RqwwKrAb5ynXpn1b9QrkevgT
-b91uzMA22Prl4DuzKiaMYDcZOQ3vtf0eFBP0GOSSgUKS4bQ3dGgi1JmQ7VuAM4uj
-+Ug5TnGoLwclTwLksc7v89C5MMPgm2vVXvCUDzyzQA7bIHFeX+Rziby4nymec4Nr
-eeXYNBJWrEp8XR7UNWmEgroXRoN1x9/6esh5pnoUXGAIWuKzSLQM70/wWxS67+v2
-aC1GNb+pXXAzYeIIiyLWaZwCSr8sWMvshFT9REk2+lnb6sAeJswQtfTUWI00mVqZ
-dvI3Wys2h0IyIejuwetTUvGhr9VgpqiLLfGzGlt/y2sg27wdHzSJbMh0VrVAK26/
-BlvEwWDCFT0ZJUMG9Lvre25DD0ycbougLsRYjzmGb/3k3UktS3XTCxyBa/k3TPw3
-vqIHrEqk446nGPDqJPS5
-=9iF7
------END PGP PUBLIC KEY BLOCK-----

coin/provisioning/common/shared/telegraf/telegraf-ioping.sh

@@ -1,26 +0,0 @@
-#!/bin/sh
-
-# Measure I/O latency once, return data in InfluxDB format
-#
-# Run one ioping command for read, and one for write.
-# Each one sends 3 requests and reports the minimum time, in nanoseconds.
-# (Because of limitations of ioping, we can't just send one request and get
-#  the number back in the batch format. Additionally, the number seems to be
-#  fluctuating quite a bit so taking the smallest number out of 3 requests is
-#  stabilising it a bit.)
-
-
-set -e
-
-[ x"$1" = x ] && echo "$0 takes a path as a first argument" && exit 1
-
-# Try to run in high priority to avoid slow-downs because of
-# factors other than I/O.
-renice  -n -10 -p $$  >/dev/null 2>&1 ||  true
-
-
-rlatency="$(ioping -B -k -c 3 -i 0.1     "$1" | cut -d " " -f 5)"
-wlatency="$(ioping -B -k -c 3 -i 0.1 -W  "$1" | cut -d " " -f 5)"
-
-printf "ioping,path=$1 read_latency_ns=%u,write_latency_ns=%u\n"  \
-       $rlatency  $wlatency

coin/provisioning/common/shared/telegraf/telegraf_packages.sha256.txt

@@ -1,6 +0,0 @@
-https://dl.influxdata.com/telegraf/releases/telegraf-1.12.1_windows_i386.zip            d2dea67a28fd7a9e21395d14f0b7ce1b6413e85cc9ffd89cc7ff8f35e8af5837
-https://dl.influxdata.com/telegraf/releases/telegraf-1.12.1_windows_amd64.zip           88d8c8146b561f43726e61688b42d0b5ab88fc22607b94df5a2c8245bbb27e29
-https://dl.influxdata.com/telegraf/releases/telegraf-1.12.1_darwin_amd64.tar.gz         58a2b294c1b6408c396b5526719cf7cad557f7075fed10ff0b2a74141ea2d629
-https://dl.influxdata.com/telegraf/releases/telegraf-1.12.1_linux_amd64.tar.gz          070a76800d1a5f33413b8948286f75caa55ebd924f6fb6996a753b9979799ef5
-https://dl.influxdata.com/telegraf/releases/telegraf-1.12.1_linux_i386.tar.gz           964077b6846708f579a100d7ea6090e2d8350ace75ec735d539bc452bc551038
-https://dl.influxdata.com/telegraf/releases/telegraf-1.12.1-static_linux_amd64.tar.gz   bb03814c99c037ce0758e3884660910f2f6fd78f3d49a8e1ef531693b3cfe25d

coin/provisioning/common/unix/DownloadURL.sh

@@ -1,8 +1,8 @@
-#!/bin/sh
+#!/usr/bin/env bash
 
 #############################################################################
 ##
-## Copyright (C) 2019 The Qt Company Ltd.
+## Copyright (C) 2017 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
 ## This file is part of the provisioning scripts of the Qt Toolkit.
@@ -33,85 +33,31 @@
 ##
 #############################################################################
 
-
 # A helper script used for downloading a file from a URL or an alternative
-# URL. Also the SHA is checked for the file (SHA algorithm is autodetected
-# based on the SHA length). Target filename should also be given.
+# URL. Also the SHA1 is checked for the file. Target filename should also
+# be given.
+#
+# If called directly from another script, it will exit the parent script
+# as well, if not called in its own subshell with parentheses.
 
-############################ BOILERPLATE ###############################
-command -v sha1sum >/dev/null   ||  alias   sha1sum='shasum -a 1'
-command -v sha256sum >/dev/null ||  alias sha256sum='shasum -a 256'
-command -v sha384sum >/dev/null ||  alias sha384sum='shasum -a 384'
-command -v sha512sum >/dev/null ||  alias sha512sum='shasum -a 512'
-########################################################################
+set -ex
 
-
-Download () {
-    url="$1"
-    targetFile="$2"
-
-    command -v curl >/dev/null  \
-        && curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$url"  \
-        || wget --tries 5 -O "$targetFile" "$url"
-}
-
-VerifyHash () {
-    file=$1
-    expectedHash=$2
-
-    if [ ! -f "$file" ]
-    then  return 2              # file does not exist
-    fi
-
-
-    hashLength="$(echo "$expectedHash" | wc -c | sed 's/ *//g')"
-    # Use backticks because of bug with bash-3 (default on macOS),
-    # caused when there are unbalanced parentheses inside $()
-    # shellcheck disable=SC2006
-    hash=`case "$hashLength" in
-            41)  sha1sum    "$file"  ;;
-            65)  sha256sum  "$file"  ;;
-            97)  sha384sum  "$file"  ;;
-            129) sha512sum  "$file"  ;;
-            *) echo "FATAL! Unknown hash length:  $hashLength" 1>&2  &&  exit 1  ;;
-        esac | cut -d ' ' -f 1`
-
-    if [ ! "$expectedHash" = "$hash" ]
-    then
-        echo "FAIL! wrong file hash:  $file  $hash"  1>&2
-        return 1
-    fi
-    echo "OK verified integrity of:  $file"
-}
-
-# Check if file already exists and is good, otherwise download it
-DownloadURL () {
+function DownloadURL {
     url=$1
-    url2=$2
-    expectedHash=$3
-    # Optional argument $4: destination filename
-    if [ x"$4" = x ]
-    then
-        # defaults to the last component of $url
-        targetFile=$(echo $url | sed 's|^.*/||')
-    else
-        targetFile=$4
-    fi
+    url_alt=$2
+    expectedSha1=$3
+    targetFile=$4
 
-    if VerifyHash "$targetFile" "$expectedHash"
-    then
-        echo "Skipping download, found and validated existing file:  $targetFile"
-    else
-        echo "Downloading from primary URL:  $url"
-        if  ! Download "$url" "$targetFile"
-        then
-            echo "FAIL! to download, trying alternative URL:  $url2"  1>&2
-            if  ! Download "$url2" "$targetFile"
-            then
-                echo 'FAIL! to download even from alternative URL'  1>&2
-                return 1
-            fi
-        fi
-        VerifyHash "$targetFile" "$expectedHash"
-    fi
+    echo "Downloading from primary URL '$url'"
+    curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$url" ||  {
+        echo "Failed to download '$url' multiple times"
+        echo "Downloading from alternative URL '$url_alt'"
+        curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$url_alt" || { echo 'Failed to download even from alternative url'; exit 1; }
+    }
+
+    echo "Checking SHA1 on PKG '$targetFile'"
+    echo "$expectedSha1 *$targetFile" > "$targetFile.sha1"
+    sha1sum --check "$targetFile.sha1"
+    rm -f "$targetFile.sha1"
 }
+

coin/provisioning/common/unix/common.sourced.sh

@@ -1,159 +0,0 @@
-#!/bin/sh
-
-
-#############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-
-# Script to be sourced from everywhere you need a common environment. Defines:
-export PROVISIONING_DIR
-export PROVISIONING_OS
-export PROVISIONING_OS_ID
-export PROVISIONING_ARCH
-export CMD_PKG_INSTALL
-export CMD_PKG_LOCALINSTALL
-export CMD_INSTALL
-
-
-
-if [ x"$IS_PROVISIONING_COMMON_SOURCED" != x ]
-then
-    echo "common.sourced.sh has already been sourced, re-sourcing skipped"
-    return
-fi
-
-# Do not export; you want children to re-source, because they only inherit the
-# variables but not the functions
-IS_PROVISIONING_COMMON_SOURCED=1
-
-
-fatal () {
-    echo "$1" 1>&2
-    if [ x"$2" != x ]
-    then  exit "$2"
-    else  exit
-    fi
-}
-
-# Takes one argument which should be the filename of this script. Returns true
-# if the script is being sourced, false if the script is being executed.
-is_script_executed () {
-    [ x"$(basename $(echo "$0" | sed s/^-//))" = x"$1" ]
-}
-
-
-is_script_executed  common.sourced.sh  \
-    && fatal "Script common.sourced.sh should always be sourced, not executed"
-
-
-_detect_linux_OS_ID () {
-    if [ -f /etc/os-release ]
-    then
-        . /etc/os-release
-        PROVISIONING_OS_ID="$ID"
-    elif [ -f /etc/redhat-release ]
-    then
-         case "$(cat /etc/redhat-release)" in
-             "Red Hat Enterprise Linux"*)
-                 PROVISIONING_OS_ID="rhel"
-                 ;;
-             "CentOS Linux"*)
-                 PROVISIONING_OS_ID="centos"
-                 ;;
-             *) fatal "Unknown string in /etc/redhat-release" ;;
-         esac
-    fi
-}
-
-set_common_environment () {
-    # Unfortunately we can't find the provisioning directory from a sourced
-    # script in a portable way
-    # PROVISIONING_DIR="$(dirname "$0")/../../"
-
-    [ x"$PROVISIONING_DIR" = x ]  \
-        &&  fatal  "PROVISIONING_DIR variable needs to be set before calling set_common_environment"
-
-    uname_s="$(uname -s)"
-    case "$uname_s" in
-        Linux)
-            PROVISIONING_OS=linux
-            _detect_linux_OS_ID
-            case "$PROVISIONING_OS_ID" in
-                suse|sles|opensuse*)
-                    CMD_PKG_INSTALL="sudo zypper -nq install"
-                    CMD_PKG_LOCALINSTALL="sudo zypper --no-gpg-checks -nq install"
-                    ;;
-                debian|ubuntu)
-                    CMD_PKG_INSTALL="sudo apt -y install"
-                    CMD_PKG_LOCALINSTALL="sudo apt -y install"
-                    ;;
-                rhel|centos|fedora)
-                    CMD_PKG_INSTALL="sudo yum -y install"
-                    CMD_PKG_LOCALINSTALL="sudo yum -y --nogpgcheck localinstall"
-                    ;;
-                *)  fatal "Unknown ID in /etc/os-release: $PROVISIONING_OS_ID" ;;
-            esac
-            ;;
-        Darwin)
-            PROVISIONING_OS=macos
-            PROVISIONING_OS_ID=macos
-            CMD_PKG_INSTALL="brew install"
-            CMD_PKG_LOCALINSTALL="echo 'TODO how to install a package file on macOS'"
-            ;;
-        *)
-            fatal "Unknown system in uname: $uname_s" 42
-            ;;
-    esac
-
-    uname_m="$(uname -m)"
-    case "$uname_m" in
-        x86_64|amd64) PROVISIONING_ARCH=amd64 ;;
-        i[3456]86)    PROVISIONING_ARCH=x86  ;;
-        *) fatal "Unknown architecture in uname: $uname_m" 43 ;;
-    esac
-
-    CMD_INSTALL="sudo install"
-}
-
-set_common_environment
-
-set_dry_run () {
-    if [ x"$PROVISIONING_DRY_RUN" != x ]
-    then
-        CMD_PKG_INSTALL="echo DRYRUN:  $CMD_PKG_INSTALL"
-        CMD_PKG_LOCALINSTALL="echo DRYRUN:  $CMD_PKG_LOCALINSTALL"
-        CMD_INSTALL="echo DRYRUN:  $CMD_INSTALL"
-    fi
-}
-
-set_dry_run

coin/provisioning/common/unix/install-openssl.sh

@@ -42,11 +42,11 @@ source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
 # shellcheck source=../unix/SetEnvVar.sh
 source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
-version="1.1.1d"
+version="1.1.1b"
 officialUrl="https://www.openssl.org/source/openssl-$version.tar.gz"
 cachedUrl="http://ci-files01-hki.intra.qt.io/input/openssl/openssl-$version.tar.gz"
 targetFile="/tmp/openssl-$version.tar.gz"
-sha="056057782325134b76d1931c48f2c7e6595d7ef4"
+sha="e9710abf5e95c48ebf47991b10cbb48c09dae102"
 opensslHome="${HOME}/openssl-${version}"
 opensslSource="${opensslHome}-src"
 DownloadURL "$cachedUrl" "$officialUrl" "$sha" "$targetFile"

coin/provisioning/common/unix/install_protobuff.sh

@@ -64,7 +64,7 @@ if uname -a |grep -q Darwin; then
 else
     ./configure
 fi
-make -j5
+make
 sudo make install
 
 # Refresh shared library cache if OS isn't macOS

coin/provisioning/common/unix/python_modules.sh

@@ -1,38 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# needed by packaging scripts
-pip3 install bs4
-pip3 install sh

coin/provisioning/common/unix/squishInstall.sh

@@ -38,14 +38,14 @@ set -ex
 # This script will install squish package for Linux and Mac.
 # Squish is need by Release Test Automation (RTA)
 
-version="6.5"
+version="6.4.3"
 # Branch version without dot
-qtBranch="513x"
+qtBranch="512x"
 squishFolder="/opt/squish"
 squishUrl="ci-files01-hki.intra.qt.io:/hdd/www/input/squish/coin/$qtBranch/"
-squishFile="squish-nosignalhandler-$version-qt$qtBranch-linux64.run"
+squishFile="squish-$version-qt$qtBranch-linux64.run"
 if uname -a |grep -q Darwin; then
-     squishFile="squish-nosignalhandler-$version-qt$qtBranch-macx86_64.dmg"
+     squishFile="squish-$version-qt$qtBranch-macx86_64.dmg"
 fi
 
 squishLicenseUrl="ci-files01-hki.intra.qt.io:/hdd/www/input/squish/coin/"
@@ -122,7 +122,7 @@ function MountAndInstall {
         sudo cp $targetFileMount /tmp
         UnMount
         sudo hdiutil attach "/tmp/$targetFile"
-        sudo /Volumes/froglogic\ Squish/Install\ Squish.app/Contents/MacOS/Squish unattended=1 targetdir="$targetDirectory/package" qtpath="$targetDirectory" > /dev/null
+        sudo /Volumes/froglogic\ Squish/Install\ Squish.app/Contents/MacOS/Squish unattended=1 targetdir="$targetDirectory/package" qtpath="$targetDirectory" > /dev/null 2>&1
         mountFolder="/Volumes/froglogic Squish"
         UnMount
     elif [[ $targetFile == *.run ]]; then
@@ -130,7 +130,7 @@ function MountAndInstall {
         sudo cp $targetFileMount $targetDirectory
         UnMount
         sudo chmod +x $targetDirectory/$targetFile
-        sudo $targetDirectory/$targetFile unattended=1 targetdir="$targetDirectory/package" qtpath="$targetDirectory" > /dev/null
+        sudo $targetDirectory/$targetFile unattended=1 targetdir="$targetDirectory/package" qtpath="$targetDirectory" > /dev/null 2>&1
         sudo rm -fr "$targetDirectory/$targetFile"
         if uname -a |grep -q "Ubuntu"; then
             sudo mkdir /usr/lib/tcl8.6

coin/provisioning/common/unix/telegraf_install.sh

@@ -1,98 +0,0 @@
-#!/bin/sh
-
-#############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-
-# This script installs telegraf and ioping and our script telegraf-ioping.sh
-# to the /usr/bin directory.
-#
-# The reasons we don't install to /usr/local/bin are:
-# 1. On SLES and RHEL, the PATH of sudo (secure_path setting in /etc/sudoers)
-#    does not include /usr/local/bin.
-# 2. On macOS /usr/local/bin does not even exist early in provisioning.
-
-
-######################## BOILERPLATE ###########################
-set -e
-
-
-PROVISIONING_DIR="$(dirname "$0")/../../"
-. "$PROVISIONING_DIR"/common/unix/common.sourced.sh
-
-. "$PROVISIONING_DIR"/common/unix/DownloadURL.sh
-
-is_script_executed telegraf_install.sh  \
-    || fatal "Script telegraf_install.sh should be executed, not sourced"
-
-################################################################
-
-
-[ "$PROVISIONING_OS" = linux ]  \
-    && ioping_sha256=259abf04bcb84f4126ff97c04b6651e1cf5ea6d8a9ff364c769a26c95b6eeb44  \
-    || ioping_sha256=55de6a2f1a5343e0ce8df31d82d47a9e79c7e612edbc6dfb39b5fc6fb358b2e3
-DownloadURL "http://ci-files01-hki.intra.qt.io/input/ioping/ioping.${PROVISIONING_OS}-${PROVISIONING_ARCH}"  \
-    ''  "$ioping_sha256"  ioping
-$CMD_INSTALL -m 755 ./ioping /usr/bin/
-rm -f ioping
-
-# 2. Install custom ioping monitoring script
-$CMD_INSTALL -m 755  "$PROVISIONING_DIR"/common/shared/telegraf/telegraf-ioping.sh  /usr/bin/
-
-# 3. Download and install telegraf
-
-[ x"$PROVISIONING_OS"   = xmacos ] && os=darwin || os=linux
-[ x"$PROVISIONING_ARCH" = xx86   ] && arch=i386 || arch=amd64
-package_filename=telegraf-1.12.1_${os}_${arch}.tar.gz
-package_sha256_list="$PROVISIONING_DIR"/common/shared/telegraf/telegraf_packages.sha256.txt
-package_sha256=$(sed -n "s/.*$package_filename *//p" "$package_sha256_list")
-
-DownloadURL  \
-    http://ci-files01-hki.intra.qt.io/input/telegraf/"$package_filename"  \
-    https://dl.influxdata.com/telegraf/releases/"$package_filename"  \
-    "$package_sha256"  \
-    telegraf.tar.gz
-
-tar -xzf ./telegraf.tar.gz -C /tmp
-telegraf_binary=$(find /tmp/telegraf* -name telegraf -type f | grep /bin/ | head -1)
-$CMD_INSTALL -m 755  "$telegraf_binary"  /usr/bin/
-rm -rf /tmp/telegraf*
-
-# 4. Edit config file with passwords
-"$PROVISIONING_DIR"/common/unix/telegraf_password.sh
-
-# 5. Start telegraf in background (-b) and with retaining the environment (-E)
-#    in order to report as hostname = $COIN_UNIQUE_JOB_ID.
-/usr/bin/sudo -b -E telegraf --config /etc/telegraf-coin.conf >/dev/null 2>&1
-
-echo DONE: "Installed and started telegraf: $package_filename"

coin/provisioning/common/unix/telegraf_password.sh

@@ -1,60 +0,0 @@
-#!/bin/sh
-
-#############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-
-######################## BOILERPLATE ###########################
-set -e
-
-
-PROVISIONING_DIR="$(dirname "$0")/../../"
-. "$PROVISIONING_DIR"/common/unix/common.sourced.sh
-
-is_script_executed telegraf_password.sh  \
-    || fatal "Script telegraf_password.sh should be executed, not sourced, to avoid leaking secrets in the logs"
-# Avoid leaking secrets in the logs
-set +x
-################################################################
-
-
-# Provisioning should run even without the secrets repository
-influxdb_password=$(cut -d : -f 2  ~qt/work/influxdb/coin_vms_writer.auth)  \
-   || influxdb_password=no_password_provided
-
-rm -f ~qt/work/influxdb/coin_vms_writer.auth
-sed "s|COIN_VMS_WRITER_PASS|$influxdb_password|"  \
-    "$PROVISIONING_DIR"/common/"$PROVISIONING_OS"/telegraf-coin.conf  \
-    > .telegraf-coin.conf.final
-$CMD_INSTALL -m 600 .telegraf-coin.conf.final /etc/telegraf-coin.conf
-rm -f .telegraf-coin.conf.final

coin/provisioning/common/windows/50-openssl_for_android_linux.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 #############################################################################
 ##
@@ -33,5 +33,7 @@
 ##
 #############################################################################
 
-# shellcheck source=../common/unix/mqtt_broker.sh
-source "${BASH_SOURCE%/*}/../common/unix/mqtt_broker.sh"
+set -ex
+
+# shellcheck source=../common/linux/openssl_for_android_linux.sh
+source "${BASH_SOURCE%/*}/../common/linux/openssl_for_android_linux.sh"

coin/provisioning/common/windows/android-openssl.ps1

@@ -1,6 +1,6 @@
 ############################################################################
 ##
-## Copyright (C) 2019 The Qt Company Ltd.
+## Copyright (C) 2018 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
 ## This file is part of the provisioning scripts of the Qt Toolkit.
@@ -45,9 +45,9 @@ if (Is64BitWinHost) {
 # Msys need to be installed to target machine
 # More info and building instructions can be found from http://doc.qt.io/qt-5/opensslsupport.html
 
-$version = "1.1.1d"
+$version = "1.1.1b"
 $zip = Get-DownloadLocation ("openssl-$version.tar.gz")
-$sha1 = "056057782325134b76d1931c48f2c7e6595d7ef4"
+$sha1 = "e9710abf5e95c48ebf47991b10cbb48c09dae102"
 $destination = "C:\Utils\openssl-android-master"
 
 # msys unix style paths
@@ -65,25 +65,8 @@ Remove-Item -Path $zip
 Write-Host "Configuring OpenSSL $version for Android..."
 Push-Location $destination
 # $ must be escaped in powershell...
-
-function CheckExitCode {
-
-    param (
-        $p
-    )
-
-    if ($p.ExitCode) {
-        Write-host "Process failed with exit code: $($p.ExitCode)"
-        exit 1
-    }
-}
-
-$configure = Start-Process -NoNewWindow -Wait -PassThru -ErrorAction Stop -FilePath "$msys_bash" -ArgumentList ("-lc", "`"pushd $openssl_path; ANDROID_NDK_HOME=$ndkPath PATH=${cc_path}:`$PATH CC=clang $openssl_path/Configure shared android-arm`"")
-CheckExitCode $configure
-
-$make = Start-Process -NoNewWindow -Wait -PassThru -ErrorAction Stop -FilePath "$msys_bash" -ArgumentList ("-lc", "`"pushd $openssl_path; ANDROID_NDK_HOME=$ndkPath PATH=${cc_path}:`$PATH CC=clang make -f $openssl_path/Makefile build_generated`"")
-CheckExitCode $make
-
+Start-Process -NoNewWindow -Wait -ErrorAction Stop -FilePath "$msys_bash" -ArgumentList ("-lc", "`"pushd $openssl_path; ANDROID_NDK_HOME=$ndkPath PATH=${cc_path}:`$PATH CC=clang $openssl_path/Configure shared android-arm`"")
+Start-Process -NoNewWindow -Wait -ErrorAction Stop -FilePath "$msys_bash" -ArgumentList ("-lc", "`"pushd $openssl_path; ANDROID_NDK_HOME=$ndkPath PATH=${cc_path}:`$PATH CC=clang make -f $openssl_path/Makefile build_generated`"")
 Pop-Location
 
 Set-EnvironmentVariable "OPENSSL_ANDROID_HOME" "$destination"

coin/provisioning/common/windows/cmake.ps1

@@ -33,8 +33,8 @@
 
 . "$PSScriptRoot\helpers.ps1"
 
-$majorminorversion = "3.7"
-$version = "3.7.2"
+$majorminorversion = "3.6"
+$version = "3.6.2"
 
 $zip = Get-DownloadLocation ("cmake-" + $version + "-win32-x86.zip")
 $officialurl = "https://cmake.org/files/v" + $majorminorversion + "/cmake-" + $version + "-win32-x86.zip"
@@ -44,7 +44,7 @@ Write-Host "Removing old cmake"
 Remove-Item "C:\CMake" -Force -Recurse -ErrorAction SilentlyContinue
 
 Download $officialurl $cachedurl $zip
-Verify-Checksum $zip "c80c17e858ecfebfaf16fe8af18b174d2600c4e6"
+Verify-Checksum $zip "541F6E7EFD228E46770B8631FFE57097576E4D4E"
 
 Extract-7Zip $zip C:
 $defaultinstallfolder = "C:\cmake-" + $version + "-win32-x86"

coin/provisioning/common/windows/disable-clean-manager.ps1

@@ -1,8 +0,0 @@
-# This script will disable automatic disk cleanup
-
-. "$PSScriptRoot\helpers.ps1"
-
-Run-Executable "reg.exe" "ADD `"HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\StorageSense\Parameters\StoragePolicy`" /V 04 /T REG_dWORD /D 0 /F"
-
-# Maintenance task used by the system to launch a silent auto disk cleanup when running low on free disk space.
-DisableSchedulerTask "DiskCleanup\SilentCleanup"

coin/provisioning/common/windows/disable-windefender.ps1

@@ -1,36 +1,3 @@
-###########################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
 # Turning off win defender.
 #
 # If disabled manually, windows will automatically enable it after
@@ -39,21 +6,3 @@
 . "$PSScriptRoot\helpers.ps1"
 
 Run-Executable "reg.exe" "ADD `"HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender`" /V DisableAntiSpyware /T REG_dWORD /D 1 /F"
-
-# 'Windows Defender Cache Maintenance' - "Periodic maintenance task."
-DisableSchedulerTask "Windows Defender\Windows Defender Cache Maintenance"
-
-# 'Windows Defender Cleanup' - "Periodic cleanup task."
-DisableSchedulerTask "Windows Defender\Windows Defender Cleanup"
-
-# 'Windows Defender Scheduled Scan' - "Periodic scan task."
-DisableSchedulerTask "Windows Defender\Windows Defender Scheduled Scan"
-
-# 'Windows Defender Verification' - "Periodic verification task."
-DisableSchedulerTask "Windows Defender\Windows Defender Verification"
-
-# Disable 'QueueReporting' - "Windows Error Reporting task to process queued reports."
-DisableSchedulerTask "Windows Error Reporting\QueueReporting"
-
-# Disable WindowsUpdate from Task Scheduler
-DisableSchedulerTask "WindowsUpdate\Scheduled Start"

coin/provisioning/common/windows/disable-windows-module-installer.ps1

@@ -1,4 +0,0 @@
-# Disable Windows Module Installer (Trusted Installer).
-# Trusted Installe enables installation, modification, and removal of Windows updates and optional components.
-# If this service is disabled, install or uninstall of Windows updates might fail for this computer.
-sc.exe config TrustedInstaller start=disabled

coin/provisioning/common/windows/helpers.ps1

@@ -3,7 +3,7 @@ function Verify-Checksum
     Param (
         [string]$File=$(throw("You must specify a filename to get the checksum of.")),
         [string]$Expected=$(throw("Checksum required")),
-        [ValidateSet("sha256","sha1","md5")][string]$Algorithm="sha1"
+        [ValidateSet("sha1","md5")][string]$Algorithm="sha1"
     )
     Write-Host "Verifying checksum of $File"
     $fs = new-object System.IO.FileStream $File, "Open"
@@ -254,23 +254,3 @@ function Remove {
         }
     }
 }
-
-function DisableSchedulerTask {
-
-    Param (
-        [string]$Task = $(BadParam("a task"))
-    )
-
-    Write-Host "Disabling $Task from Task Scheduler"
-    SCHTASKS /Change /TN "Microsoft\Windows\$Task" /DISABLE
-}
-
-function DeleteSchedulerTask {
-
-   Param (
-        [string]$Task = $(BadParam("a task"))
-    )
-
-    Write-Host "Disabling $Task from Task Scheduler"
-    SCHTASKS /DELETE /TN "Microsoft\Windows\$Task" /F
-}

coin/provisioning/common/windows/install-gnuwin32.ps1

@@ -44,4 +44,3 @@ Verify-Checksum "$temp\$zipPackage" "d7a34a385ccde2374b8a2ca3369e5b8a1452c5a5"
 Extract-7Zip "$temp\$zipPackage" C:\Utils
 
 Write-Output "$prog qt5 commit sha = 98c4f1bbebfb3cc6d8e031d36fd1da3c19e634fb" >> ~\versions.txt
-Prepend-Path "C:\Utils\gnuwin32\bin"

coin/provisioning/common/windows/install-jdk.ps1

@@ -68,7 +68,8 @@ try {
 Verify-Checksum $javaPackage $sha1
 
 Run-Executable "$javaPackage" "/s SPONSORS=0"
-Remove "$javaPackage"
+Write-Host "Cleaning $javaPackage.."
+Remove-Item -Recurse -Force -Path "$javaPackage"
 
 Write-Host "Remove Java update from startup"
 reg delete "HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Run" /v SunJavaUpdateSched /f

coin/provisioning/common/windows/install_telegraf.ps1

@@ -1,68 +0,0 @@
-#############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-. "$PSScriptRoot\..\..\common\windows\helpers.ps1"
-
-
-# Install a specific version of Telegraf
-# https://github.com/influxdata/telegraf/releases
-
-$version = "1.12.1"
-
-if (Is64BitWinHost) {
-    $arch = "amd64"
-    $sha256 = "88d8c8146b561f43726e61688b42d0b5ab88fc22607b94df5a2c8245bbb27e29"
-} else {
-    $arch = "i386"
-    $sha256 = "d2dea67a28fd7a9e21395d14f0b7ce1b6413e85cc9ffd89cc7ff8f35e8af5837"
-}
-
-$filename = "telegraf-" + $version + "_windows_" + $arch + ".zip"
-
-$url_cache = "http://ci-files01-hki.intra.qt.io/input/telegraf/" + $filename
-$url_official = "https://dl.influxdata.com/telegraf/releases/" + $filename
-$tempfile = "C:\Windows\Temp\" + $filename
-
-Write-Host "Fetching Telegraf $version..."
-Download $url_official $url_cache $tempfile
-Verify-Checksum $tempfile $sha256 sha256
-
-Write-Host "Installing telegraf.exe under C:\Utils\telegraf"
-Extract-7Zip $tempfile C:\Utils "telegraf"
-Copy-Item "$PSScriptRoot\..\..\common\windows\telegraf-coin.conf" C:\telegraf-coin.conf
-
-. "$PSScriptRoot\telegraf_password.ps1"
-
-Start-Process -FilePath C:\Utils\telegraf\telegraf.exe -ArgumentList "--config C:\telegraf-coin.conf"
-
-Write-Output "Telegraf = $version" >> ~\versions.txt

coin/provisioning/common/windows/openssl.ps1

@@ -36,7 +36,7 @@
 # This script installs OpenSSL $version.
 # Both x86 and x64 versions needed when x86 integrations are done on x64 machine
 
-$version = "1_1_1d"
+$version = "1_1_1b"
 $packagex64 = "C:\Windows\Temp\Win64OpenSSL-$version.exe"
 $packagex86 = "C:\Windows\Temp\Win32OpenSSL-$version.exe"
 
@@ -47,7 +47,7 @@ if (Is64BitWinHost) {
     $installFolder = "C:\openssl"
     $externalUrl = "https://slproweb.com/download/Win64OpenSSL-$version.exe"
     $internalUrl = "\\ci-files01-hki.intra.qt.io\provisioning\openssl\Win64OpenSSL-$version.exe"
-    $sha1 = "df9c40e9e82edf693c15302cbc8e8a057857a13c"
+    $sha1 = "5b50819dd84aa9219e0cad9cdddf78285bdd1bbb"
 
     Write-Host "Fetching from URL ..."
     Download $externalUrl $internalUrl $packagex64
@@ -74,7 +74,7 @@ if (Is64BitWinHost) {
 
 $externalUrl = "https://slproweb.com/download/Win32OpenSSL-$version.exe"
 $internalUrl = "\\ci-files01-hki.intra.qt.io\provisioning\openssl\Win32OpenSSL-$version.exe"
-$sha1 = "5c49ccd3a5d17f63d25fb819963978f50c7966d0"
+$sha1 = "1ae5ad4fe5dae01dd056274979cce26945c9e86c"
 
 Write-Host "Fetching from URL ..."
 Download $externalUrl $internalUrl $packagex86

coin/provisioning/common/windows/python.ps1

@@ -1,6 +1,6 @@
 #############################################################################
 ##
-## Copyright (C) 2019 The Qt Company Ltd.
+## Copyright (C) 2016 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
 ## This file is part of the provisioning scripts of the Qt Toolkit.
@@ -75,9 +75,6 @@ if (($archVer -eq 32) -And (Is64BitWinHost)) {
 
 Run-Executable "$targetDir\python.exe" "-m ensurepip"
 
-Write-Host "Upgrade pip to the latest version available."
-Run-Executable "$targetDir\python.exe" "-m pip install --upgrade pip"
-
 # Install python virtual env
 if (IsProxyEnabled) {
     $proxy = Get-Proxy

coin/provisioning/common/windows/python3.ps1

@@ -1,6 +1,6 @@
 #############################################################################
 ##
-## Copyright (C) 2019 The Qt Company Ltd.
+## Copyright (C) 2017 The Qt Company Ltd.
 ## Copyright (C) 2017 Pelagicore AG
 ## Contact: http://www.qt.io/licensing/
 ##
@@ -79,10 +79,6 @@ if (IsProxyEnabled) {
     Write-Host "Using proxy ($proxy) with pip"
     $pip_args = "--proxy=$proxy"
 }
-
-Write-Host "Upgrade pip3 to the latest version available."
-Run-Executable "$install_path\python.exe" "-m pip install --upgrade pip"
-
 Run-Executable "$install_path\Scripts\pip3.exe" "$pip_args install virtualenv wheel"
 
 # Install all needed packages in a special wheel cache directory

coin/provisioning/common/windows/squishInstall.ps1

@@ -1,6 +1,6 @@
 #############################################################################
 ##
-## Copyright (C) 2019 The Qt Company Ltd.
+## Copyright (C) 2018 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
 ## This file is part of the provisioning scripts of the Qt Toolkit.
@@ -38,10 +38,10 @@
 # NOTE! Make sure 64bit versions are always installed before 32bit,
 # because they use same folder name before a rename
 
-$version = "6.5"
+$version = "6.4.3"
 
 # Qt branch without dot (*.*)
-$qtBranch = "513x"
+$qtBranch = "512x"
 # So far Squish built with Qt5.12 works also with 5.13, but we have to be prepared that on some point
 # the compatibility breaks, and we may need to have separate Squish packages for different Qt versions.
 
@@ -62,16 +62,18 @@ Function DownloadAndInstallSquish {
         [string]$bit,
         [string]$squishPackage
     )
-    $SquishUrl = $squishBranchUrl + "\squish-nosignalhandler-" + $version + "-qt" + $qtBranch + "-" + $bit + "-" + $squishPackage + ".exe"
+    # MinGW x86 available only with Qt5.11, to be updated when Squish is supporting 5.13
+    if ("$bit" -eq "win32" -and $squishPackage.StartsWith("mingw")) {
+        $qtBranch = "511x"
+    }
+    $SquishUrl = $squishBranchUrl + "\squish-" + $version + "-qt" + $qtBranch + "-" + $bit + "-" + $squishPackage + ".exe"
     $SquishInstaller = "$targetDir\$squishPackage.exe"
     $SquishParameters = "unattended=1 targetdir=$targetDir\$squishPackage"
 
     Write-Host "Fetching from URL $squishUrl"
     Copy-Item "$SquishUrl" "$SquishInstaller"
     Write-Host "Installing Squish"
-    $stdoutFile = [System.IO.Path]::GetTempFileName()
-    $stderrFile = [System.IO.Path]::GetTempFileName()
-    Start-Process -FilePath "$SquishInstaller" -Wait -ArgumentList $SquishParameters -PassThru -RedirectStandardOutput $stdoutFile -RedirectStandardError $stderrFile | Out-Null
+    Run-Executable "$SquishInstaller" "$SquishParameters"
     Remove-Item -Path $SquishInstaller
     if ("$bit" -eq "win64") {
         if ($squishPackage.StartsWith("mingw")) {

coin/provisioning/common/windows/telegraf-coin.conf

@@ -1,41 +0,0 @@
-[global_tags]
-[agent]
-  interval = "10s"
-  round_interval = true
-  metric_batch_size = 100
-  metric_buffer_limit = 10000
-  collection_jitter = "0s"
-  flush_interval = "10s"
-  flush_jitter = "5s"
-  precision = ""
-  logfile = "C:\\telegraf-coin.log"
-  hostname = "$COIN_UNIQUE_JOB_ID"
-  omit_hostname = false
-[[outputs.influxdb]]
-  urls= ["https://qtinfluxdb01.intra.qt.io:8086"]
-  insecure_skip_verify = true
-  database = "coin_vms"
-  skip_database_creation = true
-  username = "coin_vms_writer"
-  password = "COIN_VMS_WRITER_PASS"
-[[inputs.cpu]]
-  percpu = true
-  totalcpu = true
-  collect_cpu_time = false
-  report_active = false
-[[inputs.disk]]
-  ignore_fs = ["tmpfs", "devtmpfs", "devfs", "iso9660", "overlay", "aufs", "squashfs"]
-[[inputs.diskio]]
-[[inputs.kernel]]
-[[inputs.mem]]
-#[[inputs.processes]]
-[[inputs.swap]]
-[[inputs.system]]
-#[[inputs.kernel_vmstat]]        # linux-only
-[[inputs.netstat]]
-
-
-# Monitor Coin process
-[[inputs.procstat]]
-  exe = "coin-"
-  pid_finder = "native"

coin/provisioning/common/windows/telegraf_password.ps1

@@ -1,46 +0,0 @@
-#############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-$auth_file = "C:\Users\qt\work\influxdb\coin_vms_writer.auth"
-
-# Provisioning should run even without the secrets repository
-if (Test-Path $auth_file) {
-    $auth_content = Get-Content $auth_file
-    $influxdb_password = $auth_content.Substring($auth_content.LastIndexOf(':') + 1)
-    Remove-Item $auth_file
-} else {
-    $influxdb_password = "no_password_provided"
-}
-
-$telegraf_conf = "C:\telegraf-coin.conf"
-(Get-Content $telegraf_conf) | ForEach-Object { $_.Replace("COIN_VMS_WRITER_PASS", $influxdb_password) } | Out-File -Encoding UTF8 $telegraf_conf

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/01-disable-mlocate.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env bash
+BASEDIR=$(dirname "$0")
+# shellcheck source=../common/linux/disable-mlocate.sh
+"$BASEDIR/../common/linux/disable-mlocate.sh"

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/01-refresh-subscription-manager.sh

@@ -1,7 +1,8 @@
 #!/usr/bin/env bash
+
 #############################################################################
 ##
-## Copyright (C) 2017 The Qt Company Ltd.
+## Copyright (C) 2018 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
 ## This file is part of the provisioning scripts of the Qt Toolkit.
@@ -34,6 +35,9 @@
 
 set -ex
 
-# Having proxy set while running autotests makes them fail
-sudo sed -i 's/PROXY_ENABLED=\"yes\"/PROXY_ENABLED=\"no\"/' /etc/sysconfig/proxy
+# refresh local certificates
+sudo subscription-manager refresh
+
+# Attach available subscriptions to system. This is needed when subscriptions are renewed.
+sudo subscription-manager attach --auto
 

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/01-systemsetup.sh

@@ -1,4 +1,5 @@
 #!/usr/bin/env bash
+
 #############################################################################
 ##
 ## Copyright (C) 2017 The Qt Company Ltd.
@@ -34,6 +35,12 @@
 
 set -ex
 
-# Having proxy set while running autotests makes them fail
-sudo sed -i 's/PROXY_ENABLED=\"yes\"/PROXY_ENABLED=\"no\"/' /etc/sysconfig/proxy
+# shellcheck source=../common/unix/check_and_set_proxy.sh
+source "${BASH_SOURCE%/*}/../common/unix/check_and_set_proxy.sh"
 
+# shellcheck disable=SC2031
+if [ "$http_proxy" != "" ]; then
+    echo "proxy=$proxy" | sudo tee -a /etc/yum.conf
+fi
+
+sudo yum update -y nss curl

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/02-disable-ntp.sh

@@ -1,3 +1,4 @@
 #!/usr/bin/env bash
+
 # shellcheck source=../common/linux/disable-ntp_linux.sh
 source "${BASH_SOURCE%/*}/../common/linux/disable-ntp_linux.sh"

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/03-install-rhel-epel.sh

@@ -33,16 +33,17 @@
 ##
 #############################################################################
 
-# This script needs to be called last during provisioning so that the software information will show up last in provision log.
+# shellcheck source=../common/unix/DownloadURL.sh
+source "${BASH_SOURCE%/*}/../common/unix/DownloadURL.sh"
 
-# Storage installed RPM packages information
+package="epel-release-6-8.noarch.rpm"
+primaryUrl="https://dl.fedoraproject.org/pub/epel/6/x86_64/Packages/e/$package"
+cacheUrl="http://ci-files01-hki.intra.qt.io/input/rhel6/$package"
+sha1="2b2767a5ae0de30b9c7b840f2e34f5dd9deaf19a"
+targetFile="/tmp/$package"
 
-set -ex
+DownloadURL "$primaryUrl" "$cacheUrl" "$sha1" "$targetFile"
 
-# shellcheck disable=SC2129
-echo "*********************************************" >> ~/versions.txt
-echo "***** All installed RPM packages *****" >> ~/versions.txt
-rpm -q -a | sort >> ~/versions.txt
-echo "*********************************************" >> ~/versions.txt
+sudo rpm -ivh "$targetFile"
+rm "$targetFile"
 
-"$(dirname "$0")/../common/linux/version.sh"

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/04-install-packages.sh

@@ -35,5 +35,12 @@
 
 set -ex
 
-# shellcheck source=../common/unix/emsdk.sh
-source "${BASH_SOURCE%/*}/../common/unix/emsdk.sh"
+installPackages=()
+
+# For Jenkins
+installPackages+=(java-1.8.0-openjdk-devel)
+# For Qt Creator
+installPackages+=(openssl-devel)
+
+sudo yum -y install "${installPackages[@]}"
+

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/05-subscription-manager-tooling.sh

@@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+# provides: fix for possible bug in the subscription manager
+# version: provided by RedHat
+# needed for yum to work properly in case there is incorrect data in
+# the sslclientkey repository parameter value
+
+set -ex
+
+sudo rm -f /etc/pki/entitlement/*
+sudo subscription-manager refresh

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/06-odbc.sh

@@ -0,0 +1,8 @@
+#!/usr/bin/env bash
+# provides: odbc devel packages on RHEL
+# version: provided by default Linux distribution repository
+# needed for configure -plugin-sql-odbc in qtbase
+
+set -ex
+
+sudo yum install -y unixODBC-devel

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/08-pythondev.sh

@@ -2,7 +2,7 @@
 
 #############################################################################
 ##
-## Copyright (C) 2019 The Qt Company Ltd.
+## Copyright (C) 2018 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
 ## This file is part of the provisioning scripts of the Qt Toolkit.
@@ -33,7 +33,19 @@
 ##
 #############################################################################
 
+# provides: python development libraries
+# version: provided by default Linux distribution repository
+# needed to build pyside
+
 set -ex
 
-# shellcheck source=../common/unix/python-modules.sh
-source "${BASH_SOURCE%/*}/../common/unix/python-modules.sh"
+sudo yum install -y python-devel python-virtualenv
+
+# install python3
+sudo yum install -y python34-devel
+
+# install pip3
+wget https://bootstrap.pypa.io/get-pip.py
+sudo python3 get-pip.py
+sudo rm -f get-pip.py
+sudo pip3 install virtualenv

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/09-cmake.sh

@@ -1,5 +1,4 @@
 #!/usr/bin/env bash
-
 set -ex
 
 "$(dirname "$0")/../common/linux/cmake_linux.sh"

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/20-libusb.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env bash
+# Required for tqtc-boot2qt/qdb
+
+set -ex
+
+sudo yum install -y libusb1-devel

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/22-mqtt_broker.sh

@@ -5,7 +5,7 @@
 ## Copyright (C) 2017 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
-## This file is part of the provisioning scripts of the Qt Toolkit.
+## This file is part of the test suite of the Qt Toolkit.
 ##
 ## $QT_BEGIN_LICENSE:LGPL21$
 ## Commercial License Usage

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/30-install_icu.sh

@@ -2,10 +2,10 @@
 
 #############################################################################
 ##
-## Copyright (C) 2019 The Qt Company Ltd.
+## Copyright (C) 2016 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
-## This file is part of the provisioning scripts of the Qt Toolkit.
+## This file is part of the test suite of the Qt Toolkit.
 ##
 ## $QT_BEGIN_LICENSE:LGPL21$
 ## Commercial License Usage
@@ -33,37 +33,42 @@
 ##
 #############################################################################
 
+# This script installs the right ICU version
+
 set -ex
+icuVersion="56.1"
+icuLocation="/usr/lib64"
+sha1="f2eab775c04ce5f3bdae6c47d06b62158b5d6753"
 
-BASEDIR=$(dirname "$0")
-# shellcheck source=../common/shared/network_test_server_ip.txt
-source "$BASEDIR/../common/shared/network_test_server_ip.txt"
-# shellcheck source=../common/unix/check_and_set_proxy.sh
-source "${BASH_SOURCE%/*}/../common/unix/check_and_set_proxy.sh"
+function Install7ZPackageFromURL {
+    url=$1
+    expectedSha1=$2
+    targetDirectory=$3
 
-echo "Set timezone to UTC."
-sudo timedatectl set-timezone Etc/UTC
-echo "Timeout for blanking the screen (0 = never)"
-gsettings set org.gnome.desktop.session idle-delay 0
-echo "Prevents screen lock when screesaver goes active."
-gsettings set org.gnome.desktop.screensaver lock-enabled false
-gsettings set org.gnome.desktop.lockdown disable-lock-screen 'true'
+    targetFile=$(mktemp)
+    wget --tries=5 --waitretry=5 --output-document="$targetFile" "$url"
+    echo "$expectedSha1  $targetFile" | sha1sum --check
+    sudo /usr/local/bin/7z x -yo"$targetDirectory" "$targetFile"
+    rm "$targetFile"
+}
 
-sudo sed -i 's|GRUB_TIMEOUT=8|GRUB_TIMEOUT=0|g' /etc/default/grub
-sudo grub2-mkconfig -o /boot/grub2/grub.cfg
+echo "Installing custom ICU $icuVersion $sha1 packages on RHEL to $icuLocation"
 
-echo "Set Network Test Server address to $network_test_server_ip in /etc/hosts"
-echo "$network_test_server_ip    qt-test-server qt-test-server.qt-test-net" | sudo tee -a /etc/hosts
-echo "Set DISPLAY"
-echo 'export DISPLAY=":0"' >> ~/.bashrc
+baseBinaryPackageURL="http://master.qt.io/development_releases/prebuilt/icu/prebuilt/$icuVersion/icu-linux-g++-Rhel6.6-x64.7z"
+Install7ZPackageFromURL "$baseBinaryPackageURL" "$sha1" "/usr/lib64"
 
-while sudo fuser /usr/lib/packagekitd >/dev/null 2>&1 ; do
-    echo "Waiting for PackageKit to finish..."
-    sleep 0.5
-done
+echo "Installing custom ICU devel packages on RHEL"
 
-# shellcheck disable=SC2031
-if [ "$http_proxy" != "" ]; then
-    sudo sed -i 's/PROXY_ENABLED=\"no\"/PROXY_ENABLED=\"yes\"/' /etc/sysconfig/proxy
-    sudo sed -i "s|HTTP_PROXY=\".*\"|HTTP_PROXY=\"$proxy\"|" /etc/sysconfig/proxy
-fi
+sha1Dev="82f8b216371b848b8d36ecec7fe7b6e9b0dba0df"
+develPackageURL="http://master.qt.io/development_releases/prebuilt/icu/prebuilt/$icuVersion/icu-linux-g++-Rhel6.6-x64-devel.7z"
+tempDir=$(mktemp -d)
+# shellcheck disable=SC2064
+trap "sudo rm -fr $tempDir" EXIT
+Install7ZPackageFromURL "$develPackageURL" "$sha1Dev" "$tempDir"
+sudo cp -a "$tempDir/lib"/* /usr/lib64
+sudo cp -a "$tempDir"/* /usr/
+
+sudo /sbin/ldconfig
+
+# Storage version information to ~/versions.txt, which is used to print version information to provision log.
+echo "ICU = $icuVersion" >> ~/versions.txt

coin/provisioning/qtci-linux-RHEL-6.6-x86_64/99-version.sh

@@ -2,10 +2,10 @@
 
 #############################################################################
 ##
-## Copyright (C) 2018 The Qt Company Ltd.
+## Copyright (C) 2016 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
-## This file is part of the provisioning scripts of the Qt Toolkit.
+## This file is part of the test suite of the Qt Toolkit.
 ##
 ## $QT_BEGIN_LICENSE:LGPL21$
 ## Commercial License Usage

coin/provisioning/qtci-linux-RHEL-7.6-x86_64/01-install_telegraf.sh

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-"$(dirname "$0")"/../common/unix/telegraf_install.sh

coin/provisioning/qtci-linux-RHEL-7.6-x86_64/02-enable-repos.sh

@@ -38,7 +38,6 @@ set -ex
 echo "set WritePreparedUpdates=false" | sudo tee -a /etc/PackageKit/PackageKit.conf
 sudo systemctl stop packagekit
 sudo systemctl disable packagekit
-sudo yum -y remove PackageKit gnome-software
 
 sudo subscription-manager config --rhsm.manage_repos=0
 sudo subscription-manager refresh

coin/provisioning/qtci-linux-RHEL-7.6-x86_64/03-install-rhel-epel.sh

@@ -38,13 +38,14 @@ set -ex
 # shellcheck source=../common/unix/DownloadURL.sh
 source "${BASH_SOURCE%/*}/../common/unix/DownloadURL.sh"
 
-package="epel-release-7-12.noarch.rpm"
+package="epel-release-7-11.noarch.rpm"
 primaryUrl="https://dl.fedoraproject.org/pub/epel/7/x86_64/Packages/e/$package"
 cacheUrl="http://ci-files01-hki.intra.qt.io/input/rhel7/$package"
-sha256="d6bb83c00ab3af26ded56459e7d6fceabfef66efbe0780b4dedbe81d62c07cd5"
+sha1="5512b80e5b71f2370d8419fa16a0bc14c5edf854"
 targetFile="/tmp/$package"
 
-DownloadURL "$cacheUrl" "$primaryUrl" "$sha256" "$targetFile"
+DownloadURL "$primaryUrl" "$cacheUrl" "$sha1" "$targetFile"
 
-sudo yum -y install "$targetFile"
+sudo rpm -ivh "$targetFile"
 rm "$targetFile"
+

coin/provisioning/qtci-linux-SLES-12-x86_64/01-install_telegraf.sh

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-"$(dirname "$0")"/../common/unix/telegraf_install.sh

coin/provisioning/qtci-linux-SLES-12-x86_64/02-disable-gnome-notifications.sh

@@ -1,4 +0,0 @@
-#!/usr/bin/env bash
-
-# shellcheck source=../common/linux/disable-notifications.sh
-source "${BASH_SOURCE%/*}/../common/linux/disable-notifications.sh"

coin/provisioning/qtci-linux-SLES-12-x86_64/02-disable-ntp.sh

@@ -1,3 +0,0 @@
-#!/usr/bin/env bash
-# shellcheck source=../common/linux/disable-ntp_linux.sh
-source "${BASH_SOURCE%/*}/../common/linux/disable-ntp_linux.sh"

coin/provisioning/qtci-linux-SLES-12-x86_64/02-zypperpackages.sh

@@ -1,96 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-set -ex
-
-sudo zypper -nq install git gcc gcc-c++
-
-sudo zypper -nq install bison flex gperf \
-        zlib-devel \
-        libudev-devel \
-        glib2-devel \
-        libopenssl-devel \
-        freetype2-devel \
-        fontconfig-devel \
-        sqlite3-devel \
-        libxkbcommon-devel \
-        libxkbcommon-x11-devel
-
-sudo zypper -nq install p7zip
-
-# EGL support
-sudo zypper -nq install Mesa-libEGL-devel Mesa-libGL-devel
-
-# gtk3 style for QtGui/QStyle
-sudo zypper -nq install gtk3-devel
-
-# Xinput2
-sudo zypper -nq install libXi-devel postgresql10 postgresql10-devel mysql-devel mysql mysql-server
-
-# system provided XCB libraries
-sudo zypper -nq install xcb-util-devel xcb-util-image-devel xcb-util-keysyms-devel \
-         xcb-util-wm-devel xcb-util-renderutil-devel
-
-# ICU
-sudo zypper -nq install libicu-devel libicu52_1
-
-# qtwebengine
-sudo zypper -nq install alsa-devel dbus-1-devel \
-         libXcomposite-devel libXcursor-devel libXrandr-devel libXtst-devel \
-         mozilla-nspr-devel mozilla-nss-devel
-
-# qtwebkit
-sudo zypper -nq install libxml2-devel libxslt-devel
-
-# GStreamer (qtwebkit and qtmultimedia), pulseaudio (qtmultimedia)
-sudo zypper -nq install gstreamer-devel gstreamer-plugins-base-devel libpulse-devel
-
-# cups
-sudo zypper -nq install cups-devel
-
-# speech-dispatcher
-sudo zypper -nq install libspeechd-devel
-# https://bugzilla.suse.com/show_bug.cgi?id=1129586
-sudo mv /usr/include/speech-dispatcher/speech-dispatcher/* /usr/include/speech-dispatcher/
-
-# ODBC support
-sudo zypper -nq install unixODBC-devel unixODBC
-
-# freetds support
-sudo zypper -nq install libfreetds freetds-devel
-
-# sqlite2 support
-sudo zypper -nq install sqlite2 sqlite2-devel
-

coin/provisioning/qtci-linux-SLES-12-x86_64/08-libclang.sh

@@ -1,7 +0,0 @@
-#!/usr/bin/env bash
-
-set -ex
-
-BASEDIR=$(dirname "$0")
-# shellcheck source=../common/unix/libclang.sh
-"$BASEDIR/../common/unix/libclang.sh"

coin/provisioning/qtci-linux-SLES-12-x86_64/18-icc.sh

@@ -1,86 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2017 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script install Intel Parallel Studio XE Composer Edition for C++ Linux
-
-# shellcheck source=../common/unix/DownloadURL.sh
-source "${BASH_SOURCE%/*}/../common/unix/DownloadURL.sh"
-
-set -ex
-
-mainStorage="ci-files01-hki.intra.qt.io:/hdd/www/input"
-localMount="/mnt/storage/"
-
-iccPackage="parallel_studio_xe_2018_update1_composer_edition_for_cpp.tgz"
-iccPackageSource="$localMount/intel/$iccPackage"
-iccInstallPath="/opt/intel"
-iccTmpPath="/tmp/icc"
-
-iccLicense="l_icc_2018.lic"
-iccLicenseSource="$localMount/semisecure/$iccLicense"
-iccLicenseTarget="/home/qt/$iccLicense"
-
-iccInstallInstructions="$iccTmpPath/instructions.txt"
-
-sudo mkdir -p "$localMount"
-sudo mount "$mainStorage" "$localMount"
-mkdir -p "$iccTmpPath"
-tar -zxf "$iccPackageSource" -C "$iccTmpPath" --strip 1
-
-cp "$iccLicenseSource" "$iccLicenseTarget"
-
-sudo umount "$localMount"
-
-cat >"$iccInstallInstructions" <<EOT
-ACCEPT_EULA=accept
-CONTINUE_WITH_OPTIONAL_ERROR=yes
-PSET_INSTALL_DIR=$iccInstallPath
-CONTINUE_WITH_INSTALLDIR_OVERWRITE=yes
-PSET_MODE=install
-ACTIVATION_LICENSE_FILE=$iccLicenseTarget
-ACTIVATION_TYPE=license_file
-PHONEHOME_SEND_USAGE_DATA=no
-ARCH_SELECTED=ALL
-COMPONENTS=;intel-comp__x86_64;intel-comp-32bit__x86_64;intel-comp-doc__noarch;intel-comp-l-all-common__noarch;intel-comp-l-all-vars__noarch;intel-comp-nomcu-vars__noarch;intel-comp-ps-32bit__x86_64;intel-comp-ps__x86_64;intel-comp-ps-ss__x86_64;intel-comp-ps-ss-bec__x86_64;intel-comp-ps-ss-bec-32bit__x86_64;intel-openmp__x86_64;intel-openmp-32bit__x86_64;intel-openmp-common__noarch;intel-openmp-common-icc__noarch;intel-tbb-libs-32bit__x86_64;intel-tbb-libs__x86_64;intel-idesupport-icc-common-ps__noarch;intel-icc__x86_64;intel-icc-32bit__x86_64;intel-c-comp-common__noarch;intel-icc-common__noarch;intel-icc-common-ps__noarch;intel-icc-common-ps-ss-bec__noarch;intel-icc-doc__noarch;intel-icc-doc-ps__noarch;intel-icc-ps__x86_64;intel-icc-ps-ss__x86_64;intel-icc-ps-ss-bec__x86_64;intel-icc-ps-ss-bec-32bit__x86_64;intel-tbb-devel-32bit__x86_64;intel-tbb-devel__x86_64;intel-tbb-common__noarch;intel-tbb-doc__noarch;intel-ism__noarch;intel-ccompxe__noarch;intel-psxe-common__noarch;intel-psxe-doc__noarch;intel-psxe-common-doc__noarch;intel-ccompxe-doc__noarch;intel-psxe-licensing__noarch;intel-psxe-licensing-doc__noarch;intel-icsxe-pset
-EOT
-
-(cd "$iccTmpPath" && sudo ./install.sh --silent $iccInstallInstructions --ignore-cpu)
-
-# Export LD_LIBRARY_PATH to Coin
-echo "export ICC64_18_LDLP=$iccInstallPath/lib/intel64" >>~/.bashrc
-echo "export ICC64_18_PATH=$iccInstallPath/compilers_and_libraries_2018.1.163/linux/bin/intel64:$iccInstallPath/bin" >>~/.bashrc
-echo "ICC = 18.0.1 20171018" >> ~/versions.txt
-
-rm -rf "$iccTmpPath"

coin/provisioning/qtci-linux-SLES-15-x86_64/01-install_telegraf.sh

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-"$(dirname "$0")"/../common/unix/telegraf_install.sh

coin/provisioning/qtci-linux-SLES-15-x86_64/01-systemsetup.sh

@@ -1,71 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-set -ex
-
-BASEDIR=$(dirname "$0")
-# shellcheck source=../common/shared/network_test_server_ip.txt
-source "$BASEDIR/../common/shared/network_test_server_ip.txt"
-# shellcheck source=../common/unix/check_and_set_proxy.sh
-source "${BASH_SOURCE%/*}/../common/unix/check_and_set_proxy.sh"
-
-echo "Set timezone to UTC."
-sudo timedatectl set-timezone Etc/UTC
-echo "Timeout for blanking the screen (0 = never)"
-gsettings set org.gnome.desktop.session idle-delay 0
-echo "Prevents screen lock when screesaver goes active."
-gsettings set org.gnome.desktop.screensaver lock-enabled false
-gsettings set org.gnome.desktop.lockdown disable-lock-screen 'true'
-
-sudo sed -i 's|GRUB_TIMEOUT=8|GRUB_TIMEOUT=0|g' /etc/default/grub
-sudo grub2-mkconfig -o /boot/grub2/grub.cfg
-
-echo "Set Network Test Server address to $network_test_server_ip in /etc/hosts"
-echo "$network_test_server_ip    qt-test-server qt-test-server.qt-test-net" | sudo tee -a /etc/hosts
-echo "Set DISPLAY"
-echo 'export DISPLAY=":0"' >> ~/.bashrc
-
-sudo systemctl stop packagekit
-sudo systemctl disable packagekit
-while sudo fuser /usr/lib/packagekitd >/dev/null 2>&1 ; do
-    echo "Waiting for PackageKit to finish..."
-    sleep 5
-done
-
-# shellcheck disable=SC2031
-if [ "$http_proxy" != "" ]; then
-    sudo sed -i 's/PROXY_ENABLED=\"no\"/PROXY_ENABLED=\"yes\"/' /etc/sysconfig/proxy
-    sudo sed -i "s|HTTP_PROXY=\".*\"|HTTP_PROXY=\"$proxy\"|" /etc/sysconfig/proxy
-fi

coin/provisioning/qtci-linux-SLES-15-x86_64/02-disable-gnome-notifications.sh

@@ -1,4 +0,0 @@
-#!/usr/bin/env bash
-
-# shellcheck source=../common/linux/disable-notifications.sh
-source "${BASH_SOURCE%/*}/../common/linux/disable-notifications.sh"

coin/provisioning/qtci-linux-SLES-15-x86_64/02-zypperpackages.sh

@@ -1,94 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2019 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-set -ex
-
-sudo zypper -nq install git gcc gcc-c++
-
-sudo zypper -nq install bison flex gperf \
-        zlib-devel \
-        libudev-devel \
-        glib2-devel \
-        libopenssl-devel \
-        freetype2-devel \
-        fontconfig-devel \
-        sqlite3-devel \
-        libxkbcommon-devel \
-        libxkbcommon-x11-devel
-
-sudo zypper -nq install cmake
-
-sudo zypper -nq install p7zip
-
-# EGL support
-sudo zypper -nq install Mesa-libEGL-devel Mesa-libGL-devel
-
-# gtk3 style for QtGui/QStyle
-sudo zypper -nq install gtk3-devel
-
-# Xinput2
-sudo zypper -nq install libXi-devel postgresql10 postgresql10-devel mysql-devel mysql mysql-server
-
-# system provided XCB libraries
-sudo zypper -nq install xcb-util-devel xcb-util-image-devel xcb-util-keysyms-devel \
-         xcb-util-wm-devel xcb-util-renderutil-devel
-
-# ICU
-sudo zypper -nq install libicu-devel libicu60_2
-
-# qtwebengine
-sudo zypper -nq install alsa-devel dbus-1-devel \
-         libXcomposite-devel libXcursor-devel libXrandr-devel libXtst-devel \
-         mozilla-nspr-devel mozilla-nss-devel
-
-# qtwebkit
-sudo zypper -nq install libxml2-devel libxslt-devel
-
-# GStreamer (qtwebkit and qtmultimedia), pulseaudio (qtmultimedia)
-sudo zypper -nq install gstreamer-devel gstreamer-plugins-base-devel libpulse-devel
-
-# cups
-sudo zypper -nq install cups-devel
-
-# speech-dispatcher
-sudo zypper -nq install libspeechd-devel
-#sudo sed -i 's:includedir=/usr/include:includedir=/usr/include/speech-dispatcher:' /usr/lib64/pkgconfig/speech-dispatcher.pc
-
-# ODBC support
-sudo zypper -nq install unixODBC-devel unixODBC
-
-# sqlite support
-sudo zypper -nq install sqlite3 sqlite3-devel
-

coin/provisioning/qtci-linux-SLES-15-x86_64/18-icc.sh

@@ -1,86 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2017 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script install Intel Parallel Studio XE Composer Edition for C++ Linux
-
-# shellcheck source=../common/unix/DownloadURL.sh
-source "${BASH_SOURCE%/*}/../common/unix/DownloadURL.sh"
-
-set -ex
-
-mainStorage="ci-files01-hki.intra.qt.io:/hdd/www/input"
-localMount="/mnt/storage/"
-
-iccPackage="parallel_studio_xe_2018_update1_composer_edition_for_cpp.tgz"
-iccPackageSource="$localMount/intel/$iccPackage"
-iccInstallPath="/opt/intel"
-iccTmpPath="/tmp/icc"
-
-iccLicense="l_icc_2018.lic"
-iccLicenseSource="$localMount/semisecure/$iccLicense"
-iccLicenseTarget="/home/qt/$iccLicense"
-
-iccInstallInstructions="$iccTmpPath/instructions.txt"
-
-sudo mkdir -p "$localMount"
-sudo mount "$mainStorage" "$localMount"
-mkdir -p "$iccTmpPath"
-tar -zxf "$iccPackageSource" -C "$iccTmpPath" --strip 1
-
-cp "$iccLicenseSource" "$iccLicenseTarget"
-
-sudo umount "$localMount"
-
-cat >"$iccInstallInstructions" <<EOT
-ACCEPT_EULA=accept
-CONTINUE_WITH_OPTIONAL_ERROR=yes
-PSET_INSTALL_DIR=$iccInstallPath
-CONTINUE_WITH_INSTALLDIR_OVERWRITE=yes
-PSET_MODE=install
-ACTIVATION_LICENSE_FILE=$iccLicenseTarget
-ACTIVATION_TYPE=license_file
-PHONEHOME_SEND_USAGE_DATA=no
-ARCH_SELECTED=ALL
-COMPONENTS=;intel-comp__x86_64;intel-comp-32bit__x86_64;intel-comp-doc__noarch;intel-comp-l-all-common__noarch;intel-comp-l-all-vars__noarch;intel-comp-nomcu-vars__noarch;intel-comp-ps-32bit__x86_64;intel-comp-ps__x86_64;intel-comp-ps-ss__x86_64;intel-comp-ps-ss-bec__x86_64;intel-comp-ps-ss-bec-32bit__x86_64;intel-openmp__x86_64;intel-openmp-32bit__x86_64;intel-openmp-common__noarch;intel-openmp-common-icc__noarch;intel-tbb-libs-32bit__x86_64;intel-tbb-libs__x86_64;intel-idesupport-icc-common-ps__noarch;intel-icc__x86_64;intel-icc-32bit__x86_64;intel-c-comp-common__noarch;intel-icc-common__noarch;intel-icc-common-ps__noarch;intel-icc-common-ps-ss-bec__noarch;intel-icc-doc__noarch;intel-icc-doc-ps__noarch;intel-icc-ps__x86_64;intel-icc-ps-ss__x86_64;intel-icc-ps-ss-bec__x86_64;intel-icc-ps-ss-bec-32bit__x86_64;intel-tbb-devel-32bit__x86_64;intel-tbb-devel__x86_64;intel-tbb-common__noarch;intel-tbb-doc__noarch;intel-ism__noarch;intel-ccompxe__noarch;intel-psxe-common__noarch;intel-psxe-doc__noarch;intel-psxe-common-doc__noarch;intel-ccompxe-doc__noarch;intel-psxe-licensing__noarch;intel-psxe-licensing-doc__noarch;intel-icsxe-pset
-EOT
-
-(cd "$iccTmpPath" && sudo ./install.sh --silent $iccInstallInstructions --ignore-cpu)
-
-# Export LD_LIBRARY_PATH to Coin
-echo "export ICC64_18_LDLP=$iccInstallPath/lib/intel64" >>~/.bashrc
-echo "export ICC64_18_PATH=$iccInstallPath/compilers_and_libraries_2018.1.163/linux/bin/intel64:$iccInstallPath/bin" >>~/.bashrc
-echo "ICC = 18.0.1 20171018" >> ~/versions.txt
-
-rm -rf "$iccTmpPath"

coin/provisioning/qtci-linux-Ubuntu-18.04-x86_64/01-install_telegraf.sh

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-"$(dirname "$0")"/../common/unix/telegraf_install.sh

coin/provisioning/qtci-linux-Ubuntu-18.04-x86_64/02-apt.sh

@@ -46,15 +46,12 @@ for service in apt-daily.timer apt-daily-upgrade.timer apt-daily.service apt-dai
 done
 
 function set_internal_repo {
-
-    # Stop fetching the dep-11 metadata, since our mirrors do not handle them well
-    sudo mv /etc/apt/apt.conf.d/50appstream{,.disabled}
-
     sudo tee "/etc/apt/sources.list" > /dev/null <<-EOC
-    deb [arch=amd64] http://repo-clones.ci.qt.io/apt-mirror/mirror/ubuntu/ bionic main restricted universe multiverse
-    deb [arch=amd64] http://repo-clones.ci.qt.io/apt-mirror/mirror/ubuntu/ bionic-updates main restricted universe multiverse
-    deb [arch=amd64] http://repo-clones.ci.qt.io/apt-mirror/mirror/ubuntu/ bionic-backports main restricted universe
-    deb [arch=amd64] http://repo-clones.ci.qt.io/apt-mirror/mirror/ubuntu/ bionic-security main restricted universe multiverse
+    deb [arch=amd64] http://repo-clones.ci.qt.io/apt-mirror/mirror/ubuntu.trumpetti.atm.tut.fi/ubuntu/ bionic main restricted universe multiverse
+    deb [arch=amd64] http://repo-clones.ci.qt.io/apt-mirror/mirror/ubuntu.trumpetti.atm.tut.fi/ubuntu/ bionic main restricted universe multiverse
+    deb [arch=amd64] http://repo-clones.ci.qt.io/apt-mirror/mirror/ubuntu.trumpetti.atm.tut.fi/ubuntu/ bionic-updates main restricted universe multiverse
+    deb [arch=amd64] http://repo-clones.ci.qt.io/apt-mirror/mirror/ubuntu.trumpetti.atm.tut.fi/ubuntu/ bionic-backports main restricted universe
+    deb [arch=amd64] http://repo-clones.ci.qt.io/apt-mirror/mirror/ubuntu.trumpetti.atm.tut.fi/ubuntu/ bionic-security main restricted universe multiverse
 EOC
 }