Update submodules on '5.10' in qt5

Change-Id: I550202469e06a974a942fbc7f207a09236f84a7d
Reviewed-by: Liang Qi <liang.qi@qt.io>

.gitmodules

@@ -1,66 +1,66 @@
 [submodule "qtbase"]
 	path = qtbase
 	url = ../qtbase.git
-	branch = 5.9.5
+	branch = 5.10
 	status = essential
 [submodule "qtsvg"]
 	depends = qtbase
 	path = qtsvg
 	url = ../qtsvg.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtdeclarative"]
 	depends = qtbase
 	recommends = qtsvg qtxmlpatterns
 	path = qtdeclarative
 	url = ../qtdeclarative.git
-	branch = 5.9.5
+	branch = 5.10
 	status = essential
 [submodule "qtactiveqt"]
 	depends = qtbase
 	path = qtactiveqt
 	url = ../qtactiveqt.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtscript"]
 	depends = qtbase
 	recommends = qttools
 	path = qtscript
 	url = ../qtscript.git
-	branch = 5.9.5
+	branch = 5.10
 	status = deprecated
 [submodule "qtmultimedia"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtmultimedia
 	url = ../qtmultimedia.git
-	branch = 5.9.5
+	branch = 5.10
 	status = essential
 [submodule "qttools"]
 	depends = qtbase
 	recommends = qtdeclarative qtactiveqt
 	path = qttools
 	url = ../qttools.git
-	branch = 5.9.5
+	branch = 5.10
 	status = essential
 [submodule "qtxmlpatterns"]
 	depends = qtbase
 	path = qtxmlpatterns
 	url = ../qtxmlpatterns.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qttranslations"]
 	depends = qttools
 	path = qttranslations
 	url = ../qttranslations.git
-	branch = 5.9.5
+	branch = 5.10
 	status = essential
 	priority = 30
 [submodule "qtdoc"]
 	depends = qtdeclarative
 	path = qtdoc
 	url = ../qtdoc.git
-	branch = 5.9.5
+	branch = 5.10
 	status = essential
 	priority = 40
 [submodule "qtrepotools"]
@@ -81,14 +81,14 @@
 	recommends = qtdeclarative qtquickcontrols qtquickcontrols2 qtserialport
 	path = qtlocation
 	url = ../qtlocation.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtsensors"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtsensors
 	url = ../qtsensors.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtsystems"]
 	depends = qtbase
@@ -121,27 +121,27 @@
 	recommends = qtdeclarative qtandroidextras
 	path = qtconnectivity
 	url = ../qtconnectivity.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtwayland"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtwayland
 	url = ../qtwayland.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qt3d"]
 	depends = qtbase
 	recommends = qtdeclarative qtimageformats qtgamepad
 	path = qt3d
 	url = ../qt3d.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtimageformats"]
 	depends = qtbase
 	path = qtimageformats
 	url = ../qtimageformats.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtquick1"]
 	depends = qtscript
@@ -154,51 +154,51 @@
 	depends = qtdeclarative
 	path = qtgraphicaleffects
 	url = ../qtgraphicaleffects.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtquickcontrols"]
 	depends = qtdeclarative
 	recommends = qtgraphicaleffects
 	path = qtquickcontrols
 	url = ../qtquickcontrols.git
-	branch = 5.9.5
+	branch = 5.10
 	status = essential
 [submodule "qtserialbus"]
 	depends = qtserialport
 	path = qtserialbus
 	url = ../qtserialbus.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtserialport"]
 	depends = qtbase
 	path = qtserialport
 	url = ../qtserialport.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtx11extras"]
 	depends = qtbase
 	path = qtx11extras
 	url = ../qtx11extras.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtmacextras"]
 	depends = qtbase
 	path = qtmacextras
 	url = ../qtmacextras.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtwinextras"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtwinextras
 	url = ../qtwinextras.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtandroidextras"]
 	depends = qtbase
 	path = qtandroidextras
 	url = ../qtandroidextras.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtenginio"]
 	depends = qtdeclarative
@@ -211,101 +211,109 @@
 	recommends = qtdeclarative
 	path = qtwebsockets
 	url = ../qtwebsockets.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtwebchannel"]
 	depends = qtbase
 	recommends = qtdeclarative qtwebsockets
 	path = qtwebchannel
 	url = ../qtwebchannel.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtwebengine"]
 	depends = qtquickcontrols qtwebchannel
 	recommends = qtlocation qttools
 	path = qtwebengine
 	url = ../qtwebengine.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 	priority = 10
 [submodule "qtcanvas3d"]
 	depends = qtdeclarative
 	path = qtcanvas3d
 	url = ../qtcanvas3d.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtwebview"]
 	depends = qtdeclarative
 	recommends = qtwebengine
 	path = qtwebview
 	url = ../qtwebview.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtquickcontrols2"]
 	depends = qtgraphicaleffects
+	recommends = qtimageformats
 	path = qtquickcontrols2
 	url = ../qtquickcontrols2.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtpurchasing"]
 	depends = qtbase qtandroidextras
 	recommends = qtdeclarative
 	path = qtpurchasing
 	url = ../qtpurchasing.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtcharts"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtcharts
 	url = ../qtcharts.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtdatavis3d"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtdatavis3d
 	url = ../qtdatavis3d.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtvirtualkeyboard"]
 	depends = qtbase qtdeclarative qtsvg
 	recommends = qtmultimedia qtquickcontrols
 	path = qtvirtualkeyboard
 	url = ../qtvirtualkeyboard.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtgamepad"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtgamepad
 	url = ../qtgamepad.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtscxml"]
 	depends = qtbase qtdeclarative
 	path = qtscxml
 	url = ../qtscxml.git
-	branch = 5.9.5
+	branch = 5.10
 	status = addon
 [submodule "qtspeech"]
 	depends = qtbase
 	recommends = qtdeclarative qtmultimedia
 	path = qtspeech
 	url = ../qtspeech.git
-	branch = 5.9.5
-	status = preview
+	branch = 5.10
+	status = addon
 [submodule "qtnetworkauth"]
 	depends = qtbase
 	recommends = qtwebview
 	path = qtnetworkauth
 	url = ../qtnetworkauth.git
-	branch = 5.9.5
-	status = preview
+	branch = 5.10
+	status = addon
 [submodule "qtremoteobjects"]
 	depends = qtbase
 	recommends = qtdeclarative
 	path = qtremoteobjects
 	url = ../qtremoteobjects.git
-	branch = 5.9.5
+	branch = 5.10
+	status = preview
+[submodule "qtwebglplugin"]
+	depends = qtbase qtwebsockets
+	recommends = qtdeclarative
+	path = qtwebglplugin
+	url = ../qtwebglplugin.git
+	branch = 5.10
 	status = preview

coin/platform_configs/default.txt

@@ -1,25 +1,22 @@
 Template                            Target OS           Target arch Compiler    Features
 ----------------------------------- ------------------- ----------- ----------- -------------------------------------------------------------------------------------
 qtci-windows-8.1-x86_64                                             MSVC2013    DeveloperBuild Release DisableTests
-qtci-windows-10-x86_64-10                                           MSVC2015    DeveloperBuild Release QtNamespace QtLibInfix BuildExamples
-qtci-windows-7-x86-3                                                Mingw53     DeveloperBuild Release OpenGLDynamic
-qtci-windows-10-x86_64-10                               x86         MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic
-qtci-windows-10-x86_64-10                                           MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic
-qtci-windows-10-x86_64-10           WinRT_10            x86         MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
-qtci-windows-10-x86_64-10           WinRT_10            armv7       MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
-qtci-linux-Ubuntu-16.04-x86_64-2                                    GCC         NoWidgets ForceDebugInfo
-qtci-linux-Ubuntu-16.04-x86_64-2                                    GCC         DeveloperBuild OutOfSourceBuild QtLibInfix QtNamespace BuildExamples Documentation
+qtci-windows-10-x86_64-7                                            MSVC2015    DeveloperBuild Release QtNamespace QtLibInfix BuildExamples
+qtci-windows-7-x86-2                                                Mingw53     DeveloperBuild Release OpenGLDynamic
+qtci-windows-10-x86_64-7                                x86         MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic
+qtci-windows-10-x86_64-7                                            MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic
+qtci-windows-10-x86_64-7            WinRT_10            x86         MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
+qtci-windows-10-x86_64-7            WinRT_10            armv7       MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
+qtci-linux-Ubuntu-16.04-x86_64-1                                    GCC         NoWidgets ForceDebugInfo
+qtci-linux-Ubuntu-16.04-x86_64-1                                    GCC         DeveloperBuild OutOfSourceBuild QtLibInfix QtNamespace BuildExamples Documentation
 qtci-linux-openSUSE-42.3-x86_64                                     GCC         DeveloperBuild NoPch
-qtci-linux-openSUSE-42.3-x86_64                                     ICC_18      DeveloperBuild NoPch DisableTests
 qtci-linux-RHEL-6.6-x86_64                                          GCC         Release ForceDebugInfo
-qtci-linux-RHEL-7.4-x86_64                                          GCC         Packaging Release NoUseGoldLinker
+qtci-linux-RHEL-7.2-x86_64                                          GCC         Packaging Release NoUseGoldLinker
 qtci-macos-10.12-x86_64-8                                           Clang       Packaging DebugAndRelease Release
 qtci-osx-10.11-x86_64-3                                             Clang       DeveloperBuild Release QtNamespace NoPch
 qtci-osx-10.10-x86_64                                               Clang       Release NoFramework DisableTests
 qtci-macos-10.12-x86_64-8           IOS_ANY             x86_64      Clang       Release DisableTests Static
-qtci-linux-RHEL-7.4-x86_64          Android_ANY         armv7       GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
-qtci-linux-Ubuntu-16.04-x86_64-2    QEMU                armv7       GCC         Release
-qtci-linux-Ubuntu-16.04-x86_64-2    QEMU                arm64       GCC         Release
-qtci-linux-Ubuntu-16.04-x86_64-2                                    GCC         TestOnly LicenseCheck
+qtci-linux-RHEL-7.2-x86_64          Android_ANY         armv7       GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
+qtci-linux-Ubuntu-16.04-x86_64-1    Boot2Qt_Pyro        armv7       GCC         Release
+qtci-linux-Ubuntu-16.04-x86_64-1                                    GCC         TestOnly LicenseCheck
 qtci-linux-RHEL-6.6-x86_64          QNX_660             armv7       GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
-qtci-linux-RHEL-7.4-x86_64          INTEGRITY_11_04     armv7       GCC         Release DisableTests OpenGLES2 NoUseGoldLinker

coin/platform_configs/qt5.txt

@@ -1,24 +1,25 @@
 Template                    Target OS           Target arch Compiler    Features
 --------------------------- ------------------- ----------- ----------- -------------------------------------------------------------------------------------
-qtci-windows-8.1-x86_64                         x86         MSVC2013    DebugAndRelease Release ForceDebugInfo OpenGLDynamic DisableTests
+qtci-windows-8.1-x86_64                         x86         MSVC2013    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic DisableTests
 qtci-windows-8.1-x86_64                                     MSVC2013    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic DisableTests
-qtci-windows-10-x86_64-10   WinRT_10                        MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
-qtci-windows-10-x86_64-10                       x86         MSVC2017    DebugAndRelease Release ForceDebugInfo OpenGLDynamic
-qtci-windows-10-x86_64-10                                   MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic
-qtci-windows-10-x86_64-10   WinRT_10            x86         MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
-qtci-windows-7-x86-3                                        Mingw53     Packaging DebugAndRelease Release OpenGLDynamic DisableTests
-qtci-windows-10-x86_64-10   WinRT_10            armv7       MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
-qtci-windows-10-x86_64-10   WinRT_10                        MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
-qtci-linux-RHEL-7.4-x86_64  Android_ANY         x86         GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
-qtci-windows-7-x86-3        Android_ANY         armv7       Mingw53     Packaging Release DisableTests OpenGLES2
-qtci-windows-7-x86-3        Android_ANY         x86         Mingw53     Packaging Release DisableTests OpenGLES2
+qtci-windows-10-x86_64-7    WinRT_10                        MSVC2015    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
+qtci-windows-10-x86-6                                       MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic
+qtci-windows-10-x86_64-7                                    MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic
+qtci-windows-10-x86_64-7    WinRT_10            x86         MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
+qtci-windows-7-x86-2                                        Mingw53     Packaging DebugAndRelease Release OpenGLDynamic DisableTests
+qtci-windows-10-x86_64-7    WinRT_10            armv7       MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
+qtci-windows-10-x86_64-7    WinRT_10                        MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo DisableTests
+qtci-linux-RHEL-7.2-x86_64  Android_ANY         x86         GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
+qtci-windows-7-x86-2        Android_ANY         armv7       Mingw53     Packaging Release DisableTests OpenGLES2
+qtci-windows-7-x86-2        Android_ANY         x86         Mingw53     Packaging Release DisableTests OpenGLES2
 qtci-macos-10.12-x86_64-8   Android_ANY         armv7       GCC         Packaging Release DisableTests OpenGLES2
 qtci-macos-10.12-x86_64-8   Android_ANY         x86         GCC         Packaging Release DisableTests OpenGLES2
 qtci-linux-RHEL-6.6-x86_64  QNX_660             x86         GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
+qtci-linux-RHEL-7.2-x86_64  QNX_700             x86         GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
+qtci-linux-RHEL-7.2-x86_64  QNX_700             armv7       GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker
+qtci-windows-10-x86_64-7    QNX_700             armv7       Mingw53     Packaging Release DisableTests OpenGLES2
+qtci-windows-10-x86_64-7    QNX_700             x86         Mingw53     Packaging Release DisableTests OpenGLES2
 qtci-macos-10.12-x86_64-8   IOS_ANY             multi       Clang       Packaging DebugAndRelease DisableTests Static
-qtci-windows-10-x86_64-10   QNX_700             armv7       Mingw53     Release DisableTests OpenGLES2
-qtci-windows-10-x86_64-10   QNX_700             x86         Mingw53     Release DisableTests OpenGLES2
-qtci-windows-10-x86_64-10   QNX_660             armv7       Mingw53     Packaging Release DisableTests OpenGLES2
-qtci-windows-10-x86_64-10   QNX_660             x86         Mingw53     Packaging Release DisableTests OpenGLES2
-qtci-linux-RHEL-7.4-x86_64  QNX_700             x86         GCC         Release DisableTests OpenGLES2 NoUseGoldLinker
-qtci-linux-RHEL-7.4-x86_64  QNX_700             armv7       GCC         Release DisableTests OpenGLES2 NoUseGoldLinker
+qtci-macos-10.12-x86_64-8   TvOS_ANY            multi       Clang       DebugAndRelease DisableTests
+qtci-macos-10.12-x86_64-8   WatchOS_ANY         multi       Clang       DebugAndRelease DisableTests
+qtci-linux-RHEL-7.2-x86_64  INTEGRITY_11_04     armv7       GCC         Packaging Release DisableTests OpenGLES2 NoUseGoldLinker

coin/platform_configs/qtbase.txt

@@ -1,4 +0,0 @@
-Template                          Target OS           Target arch Compiler    Features
---------------------------------- ------------------- ----------- ----------- -------------------------------------------------------------------------------------
-qtci-linux-Ubuntu-16.04-x86_64-2  QEMU                armv7       GCC         DeveloperBuild DisableTests
-qtci-linux-Ubuntu-16.04-x86_64-2  QEMU                arm64       GCC         DeveloperBuild DisableTests

coin/platform_configs/qtdeclarative.txt

@@ -1,4 +1,3 @@
 Template                          Target OS           Target arch Compiler    Features
 --------------------------------- ------------------- ----------- ----------- -------------------------------------------------------------------------------------
-qtci-linux-Ubuntu-16.04-x86_64-2  QEMU                armv7       GCC         DeveloperBuild
-qtci-linux-Ubuntu-16.04-x86_64-2  QEMU                arm64       GCC         DeveloperBuild
+qtci-linux-Ubuntu-16.04-x86_64-1  Boot2Qt_Pyro        armv7       GCC         DeveloperBuild

coin/platform_configs/qtwebkit.txt

@@ -1,5 +1,5 @@
 Template                    Target OS           Target arch Compiler    Features
 --------------------------- ------------------- ----------- ----------- -------------------------------------------------------------------------------------
-qtci-windows-10-x86_64-10                       x86         MSVC2017    DebugAndRelease Release ForceDebugInfo OpenGLDynamic DisableTests
-qtci-windows-10-x86_64-10                                   MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic DisableTests
-qtci-windows-7-x86-3                                        Mingw53     Packaging DebugAndRelease Release OpenGLDynamic DisableTests
+qtci-windows-10-x86_64-7                        x86         MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic DisableTests
+qtci-windows-10-x86_64-7                                    MSVC2017    Packaging DebugAndRelease Release ForceDebugInfo OpenGLDynamic DisableTests
+qtci-windows-7-x86-2                                        Mingw53     Packaging DebugAndRelease Release OpenGLDynamic DisableTests

coin/pre-provisioning/qtci-windows-10-x86/06-msvc_2017_build_tools.ps1

@@ -36,7 +36,7 @@
 # https://www.visualstudio.com/downloads/#build-tools-for-visual-studio-2017
 
 $version = "2017_version_15.0"
-$url_cache = "http://ci-files01-hki.intra.qt.io/input/windows/mu_build_tools_for_visual_studio_" + $version + "_x86_x64_10254482.exe"
+$url_cache = "http://ci-files01-hki.ci.local/input/windows/mu_build_tools_for_visual_studio_" + $version + "_x86_x64_10254482.exe"
 $sha1 = "a31e099e5114fef80a21654689e6864afc544a16"
 $msvcPackage = "C:\Windows\Temp\$version.exe"
 

coin/pre-provisioning/qtci-windows-10-x86/msvc2015_update.ps1

@@ -44,7 +44,7 @@ $parameters = "/OverrideFeedURI http://download.microsoft.com/download/6/B/B/6BB
 
 $msvc_web_installer = "vs" + $version + "_" + $update_version
 $package = "C:\Windows\temp\$msvc_web_installer.exe"
-$url_cache = "http://ci-files01-hki.intra.qt.io/input/windows/$msvc_web_installer.exe"
+$url_cache = "http://ci-files01-hki.ci.local/input/windows/$msvc_web_installer.exe"
 $url_official = "https://go.microsoft.com/fwlink/?LinkId=691129"
 $sha1 = "68abf90424aff604a04d6c61fb52adcd2cab2266"
 

coin/pre-provisioning/qtci-windows-10-x86/msvc2017.ps1

@@ -36,7 +36,7 @@
 # This script will install Visual Studio 2017
 
 $version = "2017"
-$url_cache = "http://ci-files01-hki.intra.qt.io/input/windows/mu_visual_studio_professional_" + $version + "_x86_x64_10049787.exe"
+$url_cache = "http://ci-files01-hki.ci.local/input/windows/mu_visual_studio_professional_" + $version + "_x86_x64_10049787.exe"
 $sha1 = "8d678d27735018a99dc22ddb5412e4e6868991ae"
 $msvcPackage = "C:\Windows\Temp\$version.exe"
 

coin/pre-provisioning/qtci-windows-10-x86_64/06-msvc_2017_build_tools.ps1

@@ -36,7 +36,7 @@
 # https://www.visualstudio.com/downloads/#build-tools-for-visual-studio-2017
 
 $version = "2017_version_15.0"
-$url_cache = "http://ci-files01-hki.intra.qt.io/input/windows/mu_build_tools_for_visual_studio_" + $version + "_x86_x64_10254482.exe"
+$url_cache = "http://ci-files01-hki.ci.local/input/windows/mu_build_tools_for_visual_studio_" + $version + "_x86_x64_10254482.exe"
 $sha1 = "a31e099e5114fef80a21654689e6864afc544a16"
 $msvcPackage = "C:\Windows\Temp\$version.exe"
 

coin/pre-provisioning/qtci-windows-10-x86_64/msvc2015_update.ps1

@@ -44,7 +44,7 @@ $parameters = "/OverrideFeedURI http://download.microsoft.com/download/6/B/B/6BB
 
 $msvc_web_installer = "vs" + $version + "_" + $update_version
 $package = "C:\Windows\temp\$msvc_web_installer.exe"
-$url_cache = "http://ci-files01-hki.intra.qt.io/input/windows/$msvc_web_installer.exe"
+$url_cache = "http://ci-files01-hki.ci.local/input/windows/$msvc_web_installer.exe"
 $url_official = "https://go.microsoft.com/fwlink/?LinkId=691129"
 $sha1 = "68abf90424aff604a04d6c61fb52adcd2cab2266"
 

coin/pre-provisioning/qtci-windows-10-x86_64/msvc2017.ps1

@@ -36,7 +36,7 @@
 # This script will install Visual Studio 2017
 
 $version = "2017"
-$url_cache = "http://ci-files01-hki.intra.qt.io/input/windows/mu_visual_studio_professional_" + $version + "_x86_x64_10049787.exe"
+$url_cache = "http://ci-files01-hki.ci.local/input/windows/mu_visual_studio_professional_" + $version + "_x86_x64_10049787.exe"
 $sha1 = "8d678d27735018a99dc22ddb5412e4e6868991ae"
 $msvcPackage = "C:\Windows\Temp\$version.exe"
 

coin/provisioning/common/01-macos-removethemall.sh

@@ -1,7 +1,7 @@
-#!/usr/bin/env bash
+#!/bin/sh
 #############################################################################
 ##
-## Copyright (C) 2017 The Qt Company Ltd.
+## Copyright (C) 2016 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
 ##
 ## This file is part of the test suite of the Qt Toolkit.
@@ -32,19 +32,18 @@
 ##
 #############################################################################
 
-source "${BASH_SOURCE%/*}/try_catch.sh"
-source "${BASH_SOURCE%/*}/http_proxy.txt"
+function RemoveDir {
+    param=$1
 
-try
-(
-  wget -q -e "http_proxy=$proxy" --spider proxy.intra.qt.io
-)
-
-if [ $? -eq 0 ]; then
-    echo "Setting http_proxy to $proxy"
-    export http_proxy=$proxy
-
-else
-    echo "Proxy not detected at $proxy"
-fi
+    if [ ! -d $param ]
+    then
+        echo "'$param' don't exists"
+    else
+        echo "Removing $param..."
+        sudo rm -fr $param
+    fi
+}
 
+# Remove Android
+param="/opt/android"
+RemoveDir $param

coin/provisioning/common/3dstudio_3rdparty.ps1

@@ -2,7 +2,7 @@
 
 $zip = "c:\users\qt\downloads\Qt3DStudio-3rdparty-win64-CI.zip"
 
-Invoke-WebRequest -UseBasicParsing http://ci-files01-hki.intra.qt.io/input/3rdparty/Qt3DStudio-3rdparty-win64-CI.zip -OutFile $zip
+Invoke-WebRequest -UseBasicParsing http://ci-files01-hki.ci.local/input/3rdparty/Qt3DStudio-3rdparty-win64-CI.zip -OutFile $zip
 Verify-Checksum $zip "08D740D2EFB4CBCDE7D012908B89AA48DE5CD4E1"
 Extract-Zip $zip C:\Utils\Qt3DStudio3rdparty
 Remove-Item $zip

coin/provisioning/common/DownloadURL.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 #############################################################################
 ##

coin/provisioning/common/InstallAppFromCompressedFileFromURL.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 #############################################################################
 ##
@@ -38,11 +38,10 @@
 # to /Applications/. This can be overridden by a target parameter.
 
 # shellcheck source=try_catch.sh
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
+source "${BASH_SOURCE%/*}/try_catch.sh"
 # shellcheck source=DownloadURL.sh
-source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
+source "${BASH_SOURCE%/*}/DownloadURL.sh"
 
-ExceptionDownload=99
 ExceptionCreateTmpFile=100
 ExceptionCreateTmpDirectory=101
 ExceptionUncompress=102
@@ -81,7 +80,7 @@ function InstallAppFromCompressedFileFromURL {
         else
             targetDirectory=$(mktemp -d) || throw $ExceptionCreateTmpDirectory
         fi
-        (DownloadURL "$url" "$url_alt" "$expectedSha1" "$targetFile") || throw $ExceptionDownload
+        DownloadURL "$url" "$url_alt" "$expectedSha1" "$targetFile"
         echo "Uncompress $targetFile"
         case $extension in
             "tar.gz")
@@ -104,9 +103,6 @@ function InstallAppFromCompressedFileFromURL {
 
     catch || {
         case $ex_code in
-            $ExceptionDownload)
-                exit 1;
-            ;;
             $ExceptionCreateTmpFile)
                 echo "Failed to create temporary file"
                 exit 1;

coin/provisioning/common/InstallFromCompressedFileFromURL.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 #############################################################################
 ##
@@ -38,7 +38,6 @@ source "${BASH_SOURCE%/*}/try_catch.sh"
 # shellcheck source=DownloadURL.sh
 source "${BASH_SOURCE%/*}/DownloadURL.sh"
 
-ExceptionDownload=99
 ExceptionCreateTmpFile=100
 ExceptionCreateTmpDirectory=101
 ExceptionUncompress=102
@@ -67,7 +66,7 @@ function InstallFromCompressedFileFromURL {
         echo "Creating temporary file and directory"
         targetFile=$(mktemp "$TMPDIR$(uuidgen)XXXXX.$extension") || throw $ExceptionCreateTmpFile
         targetDirectory=$(mktemp -d) || throw $ExceptionCreateTmpDirectory
-        (DownloadURL "$url" "$url_alt" "$expectedSha1" "$targetFile") || throw $ExceptionDownload
+        DownloadURL "$url" "$url_alt" "$expectedSha1" "$targetFile"
         echo "Uncompress $targetFile"
         case $extension in
             "tar.gz")
@@ -91,9 +90,6 @@ function InstallFromCompressedFileFromURL {
 
     catch || {
         case $ex_code in
-            $ExceptionDownload)
-                exit 1;
-            ;;
             $ExceptionCreateTmpFile)
                 echo "Failed to create temporary file"
                 exit 1;

coin/provisioning/common/InstallPKGFromURL.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 #############################################################################
 ##
@@ -34,7 +34,7 @@
 #############################################################################
 
 # shellcheck source=try_catch.sh
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
+source "${BASH_SOURCE%/*}/try_catch.sh"
 
 ExceptionCreateTmpFile=100
 ExceptionDownloadPrimaryUrl=101

coin/provisioning/common/cmake.ps1

@@ -40,13 +40,16 @@ $zip = "c:\users\qt\downloads\cmake-" + $version + "-win32-x86.zip"
 $officialurl = "https://cmake.org/files/v" + $majorminorversion + "/cmake-" + $version + "-win32-x86.zip"
 $cachedurl = "\\ci-files01-hki.intra.qt.io\provisioning\cmake\cmake-" + $version + "-win32-x86.zip"
 
-echo "Removing old cmake"
-Remove-Item "C:\CMake" -Force -Recurse -ErrorAction SilentlyContinue
-
 Download $officialurl $cachedurl $zip
 Verify-Checksum $zip "541F6E7EFD228E46770B8631FFE57097576E4D4E"
 
 Extract-Zip $zip C:
+# TODO: Remove line below after all Windows TIER2 VMs are based on vanilla OS
+if((Test-Path -Path "C:\CMake" )){
+    try {
+        Rename-Item -ErrorAction 'Stop' "C:\CMake" C:\CMake_old
+    } catch {}
+}
 $defaultinstallfolder = "C:\cmake-" + $version + "-win32-x86"
 Rename-Item $defaultinstallfolder C:\CMake
 

coin/provisioning/common/cmake.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 #############################################################################
 ##
@@ -39,8 +39,6 @@
 
 # shellcheck source=./InstallAppFromCompressedFileFromURL.sh
 source "${BASH_SOURCE%/*}/InstallAppFromCompressedFileFromURL.sh"
-# shellcheck source=../unix/SetEnvVar.sh
-source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
 PrimaryUrl="http://ci-files01-hki.intra.qt.io/input/mac/osx_10.11_el_capitan/cmake-3.6.2-Darwin-x86_64.tar.gz"
 AltUrl="https://cmake.org/files/v3.6/cmake-3.6.2-Darwin-x86_64.tar.gz"
@@ -49,6 +47,5 @@ appPrefix="cmake-3.6.2-Darwin-x86_64"
 
 InstallAppFromCompressedFileFromURL "$PrimaryUrl" "$AltUrl" "$SHA1" "$appPrefix"
 
-SetEnvVar "PATH" "/Applications/CMake.app/Contents/bin:\$PATH"
-
+echo "export PATH=/Applications/CMake.app/Contents/bin:\$PATH" >> ~/.bashrc
 echo "CMake = 3.6.2" >> ~/versions.txt

coin/provisioning/common/cmake_linux.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 #############################################################################
 ##
@@ -37,8 +37,8 @@
 
 # CMake is needed for autotests that verify that Qt can be built with CMake
 
-source "${BASH_SOURCE%/*}/../unix/InstallFromCompressedFileFromURL.sh"
-source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
+# shellcheck source=../common/InstallFromCompressedFileFromURL.sh
+source "${BASH_SOURCE%/*}/../common/InstallFromCompressedFileFromURL.sh"
 
 version="3.6.2"
 PrimaryUrl="http://ci-files01-hki.intra.qt.io/input/cmake/cmake-3.6.2-Linux-x86_64.tar.gz"
@@ -49,4 +49,5 @@ appPrefix="cmake-$version-Linux-x86_64"
 
 InstallFromCompressedFileFromURL "$PrimaryUrl" "$AltUrl" "$SHA1" "$targetFolder" "$appPrefix"
 
-SetEnvVar "PATH" "$targetFolder/bin:\$PATH"
+echo "Adding $targetFolder/bin to PATH"
+echo "export PATH=$targetFolder/bin:\$PATH" >> ~/.bashrc

coin/provisioning/common/disable-windows-updates.ps1

@@ -1,6 +1,4 @@
-#!/usr/bin/env bash
-
-#############################################################################
+############################################################################
 ##
 ## Copyright (C) 2017 The Qt Company Ltd.
 ## Contact: http://www.qt.io/licensing/
@@ -33,6 +31,7 @@
 ##
 #############################################################################
 
-set -ex
+# This script disables the automatic Windows updates
 
-source "${BASH_SOURCE%/*}/../common/linux/qnx_700.sh"
+stop-service wuauserv
+set-service wuauserv –startup disabled

coin/provisioning/common/helpers.ps1

@@ -28,10 +28,7 @@ function Extract-7Zip
         if (-not (test-path $zipExe)) {
             $zipExe = join-path ${env:ProgramW6432} '7-zip\7z.exe'
             if (-not (test-path $zipExe)) {
-                $zipExe = "C:\Utils\sevenzip\7z.exe"
-                if (-not (test-path $zipExe)) {
-                    throw "Could not find 7-zip."
-                }
+                throw "Could not find 7-zip."
             }
         }
     } else {
@@ -127,19 +124,3 @@ function is64bitWinHost
         return 0
     }
 }
-
-Function Execute-Command
-{
-    Param (
-       [string]$command
-    )
-    Try {
-        echo "Executing command '$command'..."
-        $process = Start-Process -FilePath "cmd" -ArgumentList "/c $command" -PassThru -Wait -WindowStyle Hidden
-        if ($process.ExitCode) {throw "Error running command: '$command'"}
-    }
-    Catch {
-        $_.Exception.Message
-        exit 1
-    }
-}

coin/provisioning/common/icu.ps1

@@ -39,12 +39,29 @@ $version = "53_1"
 
 if(($env:PROCESSOR_ARCHITECTURE -eq "AMD64") -or ($env:PROCESSOR_ARCHITEW6432 -eq "AMD64")) {
 
+   $url_official_2012 = "http://download.qt.io/development_releases/prebuilt/icu/prebuilt/msvc2012/icu_" + $version + "_msvc_2012_64_devel.7z"
+   $url_cache_2012 = "\\ci-files01-hki.intra.qt.io\provisioning\windows\icu_" + $version + "_msvc_2012_64_devel.7z"
+   $sha1_2012 = "8A8C371F3ED58E81BBCF58CF5F8388CEF51FA9AC"
+
    $url_official_2013 = "http://download.qt.io/development_releases/prebuilt/icu/prebuilt/msvc2013/icu_" + $version + "_msvc_2013_64_devel.7z"
    $url_cache_2013 = "\\ci-files01-hki.intra.qt.io/provisioning/windows/icu_" + $version + "_msvc_2013_64_devel.7z"
    $sha1_2013 = "7267CF8C5BD39C4218F2CCFE31ECA81B7644ED6F"
 
+   $icuPackage_msvc2012_64 = "C:\Windows\Temp\icu-$version-msvc2012_64.7z"
    $icuPackage_msvc2013_64 = "C:\Windows\Temp\icu-$version-msvc2013_64.7z"
 
+   if (!(Test-Path C:\Utils\icu_"$version"_msvc_2012_64_devel\)) {
+      echo "Fetching from URL ..."
+      Download $url_official_2012 $url_cache_2012 $icuPackage_msvc2012_64
+      Verify-Checksum $icuPackage_msvc2012_64 $sha1_2012
+      Get-ChildItem $icuPackage_msvc2012_64 | % {& "C:\Utils\sevenzip\7z.exe" "x" $_.fullname -o""C:\Utils\icu_"$version"_msvc_2012_64_devel\""}
+
+      echo "Cleaning $icuPackage_msvc2012_64..."
+      Remove-Item -Recurse -Force $icuPackage_msvc2012_64
+
+      echo "ICU MSVC2012 = $version" >> ~\versions.txt
+   }
+
    if (!(Test-Path C:\Utils\icu_"$version"_msvc_2013_64_devel\)) {
       echo "Fetching from URL ..."
       Download $url_official_2013 $url_cache_2013 $icuPackage_msvc2013_64
@@ -58,6 +75,7 @@ if(($env:PROCESSOR_ARCHITECTURE -eq "AMD64") -or ($env:PROCESSOR_ARCHITEW6432 -e
    }
 
 # FIXME: do we really want to have it per MSVC version? What about MSVC2015?
+[Environment]::SetEnvironmentVariable("CI_ICU_PATH_MSVC2012", "C:\\Utils\\icu_53_1_msvc_2012_64_devel\\icu53_1", "Machine")
 [Environment]::SetEnvironmentVariable("CI_ICU_PATH_MSVC2013", "C:\\Utils\\icu_53_1_msvc_2013_64_devel\\icu53_1", "Machine")
 
 # FIXME: do we really want to use the 4.8.2 ICU build?
@@ -65,12 +83,29 @@ if(($env:PROCESSOR_ARCHITECTURE -eq "AMD64") -or ($env:PROCESSOR_ARCHITEW6432 -e
 
 } else {
 
+   $url_official_2012_32 = "http://download.qt.io/development_releases/prebuilt/icu/prebuilt/msvc2012/icu_" + $version + "_msvc_2012_32_devel.7z"
+   $url_cache_2012_32 = "\\ci-files01-hki.intra.qt.io\provisioning\windows\icu_" + $version + "_msvc_2012_32_devel.7z"
+   $sha1_2012_32 = "F2FF287EEB0163B015D37AE08871165FBA87BCF0"
+
    $url_official_2013_32 = "http://download.qt.io/development_releases/prebuilt/icu/prebuilt/msvc2013/icu_" + $version + "_msvc_2013_32_devel.7z"
    $url_cache_2013_32 = "\\ci-files01-hki.intra.qt.io/provisioning/windows/icu_" + $version + "_msvc_2013_32_devel.7z"
    $sha1_2013_32 = "D745A5F0F6A3817AE989501A01A5A0BA53FDB800"
 
+   $icuPackage_msvc2012_32 = "C:\Windows\Temp\icu-$version-msvc2012_32.7z"
    $icuPackage_msvc2013_32 = "C:\Windows\Temp\icu-$version-msvc2013_32.7z"
 
+   if (!(Test-Path C:\Utils\icu_"$version"_msvc_2012_32_devel\)) {
+      echo "Fetching from URL ..."
+      Download $url_official_2012_32 $url_cache_2012_32 $icuPackage_msvc2012_32
+      Verify-Checksum $icuPackage_msvc2012_32 $sha1_2012_32
+      Get-ChildItem $icuPackage_msvc2012_32 | % {& "C:\Utils\sevenzip\7z.exe" "x" $_.fullname -o""C:\Utils\icu_"$version"_msvc_2012_32_devel\""}
+
+      echo "Cleaning $icuPackage_msvc2012_32..."
+      Remove-Item -Recurse -Force $icuPackage_msvc2012_32
+
+      echo "ICU MSVC2012 = $version" >> ~\versions.txt
+   }
+
    if (!(Test-Path C:\Utils\icu_"$version"_msvc_2013_32_devel\)) {
       echo "Fetching from URL ..."
       Download $url_official_2013_32 $url_cache_2013_32 $icuPackage_msvc2013_32
@@ -84,6 +119,7 @@ if(($env:PROCESSOR_ARCHITECTURE -eq "AMD64") -or ($env:PROCESSOR_ARCHITEW6432 -e
    }
 
 # FIXME: do we really want to have it per MSVC version? What about MSVC2015?
+[Environment]::SetEnvironmentVariable("CI_ICU_PATH_MSVC2012", "C:\\Utils\\icu_53_1_msvc_2012_32_devel\\icu53_1", "Machine")
 [Environment]::SetEnvironmentVariable("CI_ICU_PATH_MSVC2013", "C:\\Utils\\icu_53_1_msvc_2013_32_devel\\icu53_1", "Machine")
 
 }

coin/provisioning/common/install-dependencywalker.ps1

@@ -31,7 +31,7 @@
 ##
 #############################################################################
 
-. "$PSScriptRoot\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
 # This script will install Dependency Walker 2.2.6000
 

coin/provisioning/common/install-git.ps1

@@ -30,7 +30,7 @@
 ## $QT_END_LICENSE$
 ##
 #############################################################################
-. "$PSScriptRoot\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
 # Install Git version 2.13.0
 

coin/provisioning/common/install-java.ps1

@@ -31,21 +31,26 @@
 ##
 #############################################################################
 
-. "$PSScriptRoot\..\common\windows\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
-# This script will install VirtualBox
+# This script will install Java RE
+# Official Java RE 7 downloads require Oracle accounts. Using local mirrors only.
 
-$version = "5.2.4"
-$sha1 = "71df4474a5e94918728b62d1f6bc036674ef0e96"
-$url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\VirtualBox-" + $version + "-119785-Win.exe"
-$url_official = "http://download.virtualbox.org/virtualbox/" + $version + "/VirtualBox-" + $version + "-119785-Win.exe"
-$virtualboxPackage = "C:\Windows\Temp\virtualbox-$version.exe"
+$version = "7u7"
+if( (is64bitWinHost) -eq 1 ) {
+    $arch = "x64"
+    $sha1 = "9af03460c416931bdee18c2dcebff5db50cb8cb3"
+}
+else {
+    $arch = "i586"
+    $sha1 = "f76b1be20b144b1ee1d1de3255edb0a6b57d0219"
+}
 
-Download $url_official $url_cache $virtualboxPackage
-Verify-Checksum $virtualboxPackage $sha1
-Start-Process $virtualboxPackage -ArgumentList "--silent" -Wait
+$url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\jre-" + $version + "-windows-" + $arch + ".exe"
+$javaPackage = "C:\Windows\Temp\java-$version.exe"
 
-echo "Cleaning $virtualboxPackage.."
-Remove-Item -Recurse -Force "$virtualboxPackage"
-
-echo "VirtualBox = $version" >> ~\versions.txt
+Copy-Item $url_cache $javaPackage
+cmd /c "$javaPackage /s SPONSORS=0"
+echo "Cleaning $javaPackage.."
+Remove-Item -Recurse -Force "$javaPackage"
+echo "Java = $version $arch" >> ~\versions.txt

coin/provisioning/common/install-mingw.ps1

@@ -31,7 +31,7 @@
 ##
 ############################################################################
 
-. "$PSScriptRoot\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
 function InstallMinGW
 {

coin/provisioning/common/install-notepad++.ps1

@@ -31,7 +31,7 @@
 ##
 #############################################################################
 
-. "$PSScriptRoot\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
 # This script will install Notepad++
 
@@ -57,6 +57,11 @@ Remove-Item -Recurse -Force "$nppPackage"
 
 echo "Notepad++ = $version" >> ~\versions.txt
 
-Rename-Item -Path "C:\Program Files\Notepad++\updater" -NewName "updater_disabled"
+if( (is64bitWinHost) -eq 1 ) {
+    Rename-Item -Path "C:\Program Files (x86)\Notepad++\updater" -NewName "updater_disabled"
+}
+else {
+    Rename-Item -Path "C:\Program Files\Notepad++\updater" -NewName "updater_disabled"
+}
 
 echo "Auto-updating disabled."

coin/provisioning/common/install-ruby.ps1

@@ -31,28 +31,30 @@
 ##
 #############################################################################
 
-. "$PSScriptRoot\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
 # This script will install Ruby
 
-$version = "2.4.2-2"
+$version = "2.2.6"
 if( (is64bitWinHost) -eq 1 ) {
     $arch = "-x64"
-    $sha1 = "c961c2752a183487bc42ed24beb7e931230fa7d5"
+    $sha1 = "4D0E366F0264CDED174E5842B2435E22B81FB57A"
 }
 else {
-    $arch = "-x86"
-    $sha1 = "2639a481c3b5ad11f57d5523cc41ca884286089e"
+    $arch = ""
+    $sha1 = "8649309fffe9c746ad5549d3f7b70490806e95df"
 }
 $url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\rubyinstaller-" + $version + $arch + ".exe"
-$url_official = "https://github.com/oneclick/rubyinstaller2/releases/download/rubyinstaller-" + $version + "/rubyinstaller-" + $version + $arch + ".exe"
+$url_official = "https://bintray.com/oneclick/rubyinstaller/download_file?file_path=rubyinstaller-" + $version + $arch + ".exe"
 $rubyPackage = "C:\Windows\Temp\rubyinstaller-$version.exe"
 
 Download $url_official $url_cache $rubyPackage
 Verify-Checksum $rubyPackage $sha1
-Start-Process -FilePath $rubyPackage -ArgumentList "/dir=C:\Ruby-$version$arch /tasks=modpath /verysilent" -Wait
+cmd /c "$rubyPackage /silent"
 
 echo "Cleaning $rubyPackage.."
 Remove-Item -Recurse -Force "$rubyPackage"
 
+Add-Path "C:\Ruby22-x64\bin"
+
 echo "Ruby = $version" >> ~\versions.txt

coin/provisioning/common/install-sevenzip.ps1

@@ -31,12 +31,11 @@
 ##
 #############################################################################
 
-. "$PSScriptRoot\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
 # This script installs 7-Zip
 
-$version = "16.04"
-$nonDottedVersion = "1604"
+$version = "1604"
 
 if( (is64bitWinHost) -eq 1 ) {
     $arch = "-x64"
@@ -47,18 +46,15 @@ else {
     $sha1 = "dd1cb1163c5572951c9cd27f5a8dd550b33c58a4"
 }
 
-$url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\7z" + $nonDottedVersion + $arch + ".exe"
-$url_official = "http://www.7-zip.org/a/7z" + $nonDottedVersion + $arch + ".exe"
-$7zPackage = "C:\Windows\Temp\7zip-$nonDottedVersion.exe"
-$7zTargetLocation = "C:\Utils\sevenzip\"
+$url_cache = "\\ci-files01-hki.intra.qt.io\provisioning\windows\7z" + $version + $arch + ".exe"
+$url_official = "http://www.7-zip.org/a/7z" + $version + $arch + ".exe"
+$7zPackage = "C:\Windows\Temp\7zip-$version.exe"
 
 Download $url_official $url_cache $7zPackage
 Verify-Checksum $7zPackage $sha1
-Start-Process -FilePath $7zPackage -ArgumentList "/S","/D=$7zTargetLocation" -Wait
+cmd /c "$7zPackage /S /D=C:\Utils\sevenzip\"
 
 echo "Cleaning $7zPackage.."
 Remove-Item -Recurse -Force "$7zPackage"
 
-Add-Path $7zTargetLocation
-
 echo "7-Zip = $version" >> ~\versions.txt

coin/provisioning/common/install-strawberry-perl.ps1

@@ -31,7 +31,7 @@
 ##
 #############################################################################
 
-. "$PSScriptRoot\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
 # This script installs Strawberry Perl
 

coin/provisioning/common/install_xcode.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 #############################################################################
 ##
@@ -44,8 +44,8 @@
 
 
 
-# shellcheck source=../common/unix/try_catch.sh
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
+# shellcheck source=../common/try_catch.sh
+source "${BASH_SOURCE%/*}/try_catch.sh"
 
 function InstallXCode()
 {

coin/provisioning/common/libclang.ps1

@@ -1,10 +1,10 @@
 param([Int32]$archVer=32)
-. "$PSScriptRoot\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
 # PySide versions following 5.6 use a C++ parser based on Clang (http://clang.org/).
 # The Clang library (C-bindings), version 3.9 or higher is required for building.
 
-Get-Content "$PSScriptRoot\..\shared\sw_versions.txt" | Foreach-Object {
+Get-Content "$PSScriptRoot\..\common\sw_versions.txt" | Foreach-Object {
     $var = $_.Split('=')
     New-Variable -Name $var[0] -Value $var[1]
     $libclang_version = $libclang_version -replace '["."]'

coin/provisioning/common/libclang.sh

@@ -40,10 +40,8 @@
 # In case of Linux, we expect to get the values as args
 set -e
 
-source "${BASH_SOURCE%/*}/check_and_set_proxy.sh"
-
 BASEDIR=$(dirname "$0")
-. $BASEDIR/../shared/sw_versions.txt
+. $BASEDIR/sw_versions.txt
 url=$1
 sha1=$2
 version=$3

coin/provisioning/common/linux-removethemall.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/env bash
 
 #############################################################################
 ##
@@ -33,10 +33,17 @@
 ##
 #############################################################################
 
-set -ex
+# This script removes preinstalled sw.
+# NOTE! Make sure that ALL software which are removed here have provision script under platrom folders which calls this script
 
-sudo yum-config-manager --enable rhel-server-rhscl7-rpms
-sudo yum -y install devtoolset-4
+function RemoveDir {
+    targetFolder=$1
 
-echo "source /opt/rh/devtoolset-4/enable" >> ~/.bashrc
+    if [ -d "$targetFolder" ]; then
+        echo "Removing existing $targetFolder..."
+        sudo rm -fr "$targetFolder"
+    fi
+}
 
+# Android
+RemoveDir /opt/android

coin/provisioning/common/linux/android_linux.sh

@@ -1,136 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2017 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script install Android sdk and ndk.
-
-# It also runs update for SDK API, latest SDK tools, latest platform-tools and build-tools version
-
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
-source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
-source "${BASH_SOURCE%/*}/../unix/check_and_set_proxy.sh"
-source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
-
-targetFolder="/opt/android"
-sdkTargetFolder="$targetFolder/sdk"
-
-basePath="http://ci-files01-hki.intra.qt.io/input/android"
-
-toolsVersion="r25.2.5"
-toolsFile="tools_$toolsVersion-linux.zip"
-ndkVersion="r10e"
-ndkFile="android-ndk-$ndkVersion-linux-x86_64.zip"
-sdkBuildToolsVersion="25.0.2"
-sdkApiLevel="android-21"
-
-toolsSha1="72df3aa1988c0a9003ccdfd7a13a7b8bd0f47fc1"
-ndkSha1="f692681b007071103277f6edc6f91cb5c5494a32"
-
-toolsTargetFile="/tmp/$toolsFile"
-toolsSourceFile="$basePath/$toolsFile"
-ndkTargetFile="/tmp/$ndkFile"
-ndkSourceFile="$basePath/$ndkFile"
-
-ExceptionDownload=99
-ExceptionUnzipTools=100
-ExceptionUnzipNdk=101
-ExceptionRmTools=102
-ExceptionRmNdk=103
-ExceptionSdkManager=104
-
-try
-(
-    (DownloadURL "$toolsSourceFile" "$toolsSourceFile" "$toolsSha1" "$toolsTargetFile") || throw $ExceptionDownload
-    (DownloadURL "$ndkSourceFile" "$ndkSourceFile" "$ndkSha1" "$ndkTargetFile") || throw $ExceptionDownload
-    echo "Unzipping Android NDK to '$targetFolder'"
-    sudo unzip -q "$ndkTargetFile" -d "$targetFolder" || throw $ExceptionUnzipNdk
-    echo "Unzipping Android Tools to '$sdkTargetFolder'"
-    sudo unzip -q "$toolsTargetFile" -d "$sdkTargetFolder" || throw $ExceptionUnzipTools
-    rm "$ndkTargetFile" || throw $ExceptionRmNdk
-    rm "$toolsTargetFile" || throw $ExceptionRmTools
-
-    echo "Changing ownership of Android files."
-    if uname -a |grep -q "el6\|el7"; then
-        sudo chown -R qt:wheel "$targetFolder"
-    else
-        sudo chown -R qt:users "$targetFolder"
-    fi
-
-    echo "Running SDK manager for platforms;$sdkApiLevel, tools, platform-tools and build-tools;$sdkBuildToolsVersion."
-    if [ "$http_proxy" != "" ]; then
-        proxy_host=$(echo $proxy | cut -d'/' -f3 | cut -d':' -f1)
-        proxy_port=$(echo $proxy | cut -d':' -f3)
-        echo "y" |"$sdkTargetFolder/tools/bin/sdkmanager" --no_https --proxy=http --proxy_host=$proxy_host --proxy_port=$proxy_port "platforms;$sdkApiLevel" "tools" "platform-tools" "build-tools;$sdkBuildToolsVersion" || throw $ExceptionSdkManager
-    else
-        echo "y" |"$sdkTargetFolder/tools/bin/sdkmanager" "platforms;$sdkApiLevel" "tools" "platform-tools" "build-tools;$sdkBuildToolsVersion" || throw $ExceptionSdkManager
-    fi
-
-    SetEnvVar "ANDROID_SDK_HOME" "$sdkTargetFolder"
-    SetEnvVar "ANDROID_NDK_HOME" "$targetFolder/android-ndk-$ndkVersion"
-    SetEnvVar "ANDROID_NDK_HOST" "linux-x86_64"
-    SetEnvVar "ANDROID_API_VERSION" "$sdkApiLevel"
-
-    echo "Android SDK tools = $toolsVersion" >> ~/versions.txt
-    echo "Android SDK Build Tools = $sdkBuildToolsVersion" >> ~/versions.txt
-    echo "Android SDK API level = $sdkApiLevel" >> ~/versions.txt
-    echo "Android NDK = $ndkVersion" >> ~/versions.txt
-)
-catch || {
-        case $ex_code in
-            $ExceptionDownload)
-                exit 1;
-            ;;
-            $ExceptionUnzipTools)
-                echo "Failed to unzip Android SDK Tools."
-                exit 1;
-            ;;
-            $ExceptionUnzipNdk)
-                echo "Failed to unzip Android NDK."
-                exit 1;
-            ;;
-            $ExceptionRmTools)
-                echo "Failed to remove temporary tools package '$toolsTargetFile'."
-                exit 1;
-            ;;
-            $ExceptionRmNdk)
-                echo "Failed to remove temporary NDK package '$ndkTargetFile'."
-                exit 1;
-            ;;
-            $ExceptionSdkManager)
-                echo "Failed to run sdkmanager."
-                exit 1;
-            ;;
-        esac
-}
-

coin/provisioning/common/linux/disable-ntp_linux.sh

@@ -1,44 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2018 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-set -ex
-
-echo "Disable Network Time Protocol (NTP)"
-
-if uname -a |grep -q "Ubuntu"; then
-    sudo timedatectl set-ntp false
-else
-    systemctl &>/dev/null && sudo systemctl disable ntpd || sudo /sbin/chkconfig ntpd off
-fi

coin/provisioning/common/linux/fbx_linux.sh

@@ -1,62 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2017 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script installs FBX SDK
-source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
-source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
-
-set -e
-tarballName="fbx20161_2_fbxsdk_linux.tar.gz"
-targetFolder="/opt/fbx"
-cachedUrl="http://ci-files01-hki.intra.qt.io/input/fbx/$tarballName"
-officialUrl="http://download.autodesk.com/us/fbx_release_older/2016.1.2/$tarballName"
-sha1="b0a08778de025e2c6e90d6fbdb6531f74a3da605"
-tmpFolder="/tmp"
-targetFile="$tmpFolder/$tarballName"
-installer="$tmpFolder/fbx20161_2_fbxsdk_linux"
-
-DownloadURL "$cachedUrl" "$officialUrl" "$sha1" "$targetFile"
-
-sudo tar -C $tmpFolder -xf "$targetFile"
-sudo mkdir -p $targetFolder
-(echo "yes"; echo "n") | sudo "$installer" -w "$tmpFolder" "$targetFolder"
-
-rm -rf "$targetFile"
-
-# Set env variables
-SetEnvVar "FBXSDK" "$targetFolder"
-
-echo "FBX SDK = 2016.1.2" >> ~/versions.txt
-

coin/provisioning/common/linux/openssl_for_android_linux.sh

@@ -1,87 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2017 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script install OpenSSL from sources.
-# Requires GCC and Perl to be in PATH.
-
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
-source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
-source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
-
-version="1.0.2g"
-officialUrl="https://www.openssl.org/source/openssl-$version.tar.gz"
-cachedUrl="http://ci-files01-hki.intra.qt.io/input/openssl/openssl-$version.tar.gz"
-targetFile="/tmp/openssl-$version.tar.gz"
-installFolder="/home/qt/"
-sha="36af23887402a5ea4ebef91df8e61654906f58f2"
-# Until every VM doing Linux Android builds have provisioned the env variable
-# OPENSSL_ANDROID_HOME, we can't change the hard coded path that's currently in Coin.
-# QTQAINFRA-1436
-opensslHome="${installFolder}openssl-1.0.2"
-
-ExceptionDownload=99
-ExceptionTar=100
-ExceptionConfig=101
-
-try
-(
-    (DownloadURL "$cachedUrl" "$officialUrl" "$sha" "$targetFile") || throw $ExceptionDownload
-
-    tar -xzf "$targetFile" -C "$installFolder" || throw $ExceptionTar
-    # This rename should be removed once hard coded path from Coin is fixed. (QTQAINFRA-1436)
-    mv "${opensslHome}g" "${opensslHome}"
-    pushd "$opensslHome"
-    perl Configure shared android || throw $ExceptionConfig
-
-    SetEnvVar "OPENSSL_ANDROID_HOME" "$opensslHome"
-
-    echo "OpenSSL for Android = $version" >> ~/versions.txt
-)
-catch || {
-    case $ex_code in
-        $ExceptionDownload)
-            exit 1;
-        ;;
-        $ExceptionTar)
-            echo "Failed to extract $targetFile"
-            exit 1;
-        ;;
-        $ExceptionConfig)
-            echo "Failed to run 'config'."
-            exit 1;
-        ;;
-    esac
-
-}

coin/provisioning/common/macos/fbx_macos.sh

@@ -1,82 +0,0 @@
-#!/usr/bin/env bash
-#############################################################################
-##
-## Copyright (C) 2017 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script installs FBX SDK
-
-# shellcheck source=./../unix/try_catch.sh
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
-# shellcheck source=../unix/SetEnvVar.sh
-source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
-
-fileName="fbx20161_2_fbxsdk_clang_mac.pkg.tgz"
-targetFolder="/opt/fbx"
-cachedUrl="/net/ci-files01-hki.intra.qt.io/hdd/www/input/fbx/$fileName"
-officialUrl="http://download.autodesk.com/us/fbx_release_older/2016.1.2/$fileName"
-sha1="f82535423c700c605320c52e13e781c92208ec6b"
-targetFolder="/tmp"
-targetFile="$targetFolder/$fileName"
-installer="$targetFolder/fbx20161_2_fbxsdk_clang_macos.pkg"
-
-ExceptionExtractPrimaryUrl=100
-
-try
-(
-    echo "Extracting '$cachedUrl'"
-    tar -xzf "$cachedUrl" -C "$targetFolder" || throw $ExceptionExtractPrimaryUrl
-)
-catch || {
-    case $ex_code in
-        $ExceptionExtractPrimaryUrl)
-        set -e
-        echo "Failed to uncompress from '$cachedUrl'"
-        echo "Downloading from '$officialUrl'"
-        curl --fail -L --retry 5 --retry-delay 5 -o "$targetFile" "$officialUrl" || exit 1;
-        echo "Checking SHA1 on PKG '$targetFile'"
-        echo "$sha1 *$targetFile" > $targetFile.sha1
-        shasum --check $targetFile.sha1
-        echo "Extracting '$targetFile'"
-        tar -xzf "$targetFile" -C "$targetFolder" || exit 1;
-        ;;
-    esac
-}
-set -e
-rm -rf "$targetFile"
-echo "Running installer for '$installer'"
-sudo installer -pkg "$installer" -target "/"
-
-# Set env variables
-SetEnvVar "FBXSDK" "/Applications/Autodesk/FBX\ SDK/2016.1.2/"
-
-echo "FBX SDK = 2016.1.2" >> ~/versions.txt
-

coin/provisioning/common/macos/install-commandlinetools.sh

@@ -1,88 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2017 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the test suite of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-source "${BASH_SOURCE%/*}/../unix/DownloadURL.sh"
-source "${BASH_SOURCE%/*}/../unix/try_catch.sh"
-set -ex
-
-# Command line tools is need by homebrew
-
-function InstallCommandLineTools {
-
-    ExceptionMount=101
-    ExceptionInstall=102
-    ExceptionUnmount=103
-
-    url=$1
-    url_alt=$2
-    expectedSha1=$3
-    packageName=$4
-    version=$5
-
-    try
-    (
-        DownloadURL $url $url_alt $expectedSha1 /tmp/$packageName
-        echo "Mounting $packageName"
-        hdiutil attach /tmp/$packageName || throw $ExceptionMount
-        cd "/Volumes/Command Line Developer Tools"
-        echo "Installing"
-        sudo installer -verbose -pkg *.pkg -target / || throw $ExceptionInstall
-        cd /
-        # Let's fait for 5 second before unmounting. Sometimes resource is busy and cant be unmounted
-        sleep 3
-        echo "Unmounting"
-        umount /Volumes/Command\ Line\ Developer\ Tools/ || throw $ExceptionUnmount
-        echo "Removing $packageName"
-        rm /tmp/$packageName
-
-        echo "Command Line Tools = $version" >> ~/versions.txt
-    )
-    catch || {
-        case $ex_code in
-            $ExceptionMount)
-                echo "Failed to mount"
-                exit 1;
-            ;;
-            $ExceptionInstall)
-                echo "Failed to install"
-                exit 1;
-            ;;
-            $ExceptionUnmount)
-                echo "Failed to unmount"
-                exit 1;
-
-        esac
-    }
-
-}

coin/provisioning/common/macos/python2.sh

@@ -1,52 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2018 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-# This script installs python2
-
-source "${BASH_SOURCE%/*}/InstallPKGFromURL.sh"
-source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
-
-PrimaryUrl="http://ci-files01-hki.intra.qt.io/input/mac/python-2.7.14-macosx10.6.pkg"
-AltUrl="https://www.python.org/ftp/python/2.7.14/python-2.7.14-macosx10.6.pkg"
-SHA1="fa2bb77243ad0cb611aa3295204fab403bb0fa09"
-DestDir="/"
-
-InstallPKGFromURL "$PrimaryUrl" "$AltUrl" "$SHA1" "$DestDir"
-
-/Library/Frameworks/Python.framework/Versions/2.7/bin/pip install virtualenv
-
-SetEnvVar "PATH" "/Library/Frameworks/Python.framework/Versions/2.7/bin/:\$PATH"
-
-echo "python2 = 2.7.14" >> ~/versions.txt

coin/provisioning/common/mesa_llvmpipe.ps1

@@ -30,7 +30,7 @@
 ## $QT_END_LICENSE$
 ##
 #############################################################################
-. "$PSScriptRoot\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
 $version = "11_2_2"
 $package = "C:\Windows\temp\opengl32sw.7z"
@@ -55,7 +55,7 @@ function Extract-Mesa
 }
 
 if ( Test-Path C:\Windows\SysWOW64 ) {
-    Extract-Mesa $mesaOpenglUrl_64 $mesaOpenglSha1_64 "C:\Windows\System32"
+    Extract-Mesa $mesaOpenglUrl_64 $mesaOpenglSha1_64 "C:\Windows\sysnative"
     Extract-Mesa $mesaOpenglUrl_32 $mesaOpenglSha1_32 "C:\Windows\SysWOW64"
 } else {
     Extract-Mesa $mesaOpenglUrl_32 $mesaOpenglSha1_32 "C:\Windows\system32"

coin/provisioning/common/mqtt_broker.ps1

@@ -1,5 +1,3 @@
-#!/usr/bin/env bash
-
 #############################################################################
 ##
 ## Copyright (C) 2017 The Qt Company Ltd.
@@ -33,14 +31,20 @@
 ##
 #############################################################################
 
-set -ex
+. "$PSScriptRoot\helpers.ps1"
 
-source "${BASH_SOURCE%/*}/../common/macos/install-commandlinetools.sh"
+echo "MQTT: Downloading Paho test broker..."
+$zip = "c:\users\qt\downloads\pahotest.zip"
+$externalUrl = "https://github.com/eclipse/paho.mqtt.testing/archive/c342c09dadc7a664d0a8befad1ca031f5a0b0bc0.zip"
+$internalUrl = "http://ci-files01-hki.ci.local/input/mqtt_broker/paho.mqtt.testing-c342c09dadc7a664d0a8befad1ca031f5a0b0bc0.zip"
+$sha1 = "532fe145096cdd8d679f425cbfd883289150c968"
 
-version="8.3.2"
-packageName="CommandLineToolsforXcode$version.dmg"
-url="http://ci-files01-hki.intra.qt.io/input/mac/$packageName"
-sha1="da74b2bbf3058a0805c2d9f41ee5cf381d0e0ebe"
+Download $externalUrl $internalUrl $zip
+Verify-Checksum $zip $sha1
 
-InstallCommandLineTools $url $url $sha1 $packageName $version
+echo "MQTT: Installing $zip..."
+Extract-Zip $zip C:\Utils
+Remove-Item $zip
 
+echo "MQTT: Updating environment..."
+[Environment]::SetEnvironmentVariable("MQTT_TEST_BROKER_LOCATION", "C:\Utils\paho.mqtt.testing-c342c09dadc7a664d0a8befad1ca031f5a0b0bc0\interoperability\startbroker.py", "Machine")

coin/provisioning/common/mqtt_broker.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 #############################################################################
 ##
@@ -33,14 +33,20 @@
 ##
 #############################################################################
 
-set -ex
+# This script installs paho testing broker
 
-source "${BASH_SOURCE%/*}/../common/macos/install-commandlinetools.sh"
+# shellcheck source=../common/InstallFromCompressedFileFromURL.sh
+source "${BASH_SOURCE%/*}/../common/InstallFromCompressedFileFromURL.sh"
 
-version="8.2"
-packageName="Command_Line_Tools_macOS_10.11_for_Xcode_$version.dmg"
-url="http://ci-files01-hki.intra.qt.io/input/mac/$packageName"
-sha1="4df615ca765ac1a1e681ddcbca79fc15990e3b25"
+CommitSHA="c342c09dadc7a664d0a8befad1ca031f5a0b0bc0"
+PrimaryUrl="https://github.com/eclipse/paho.mqtt.testing/archive/$CommitSHA.zip"
+AltUrl="http://ci-files01-hki.ci.local/input/mqtt_broker/paho.mqtt.testing-$CommitSHA.zip"
+SHA1="532fe145096cdd8d679f425cbfd883289150c968"
+targetFolder="/opt/paho_broker"
+appPrefix="paho.mqtt.testing-$CommitSHA"
 
-InstallCommandLineTools $url $url $sha1 $packageName $version
+sudo rm -fr "$targetFolder"
+InstallFromCompressedFileFromURL "$PrimaryUrl" "$AltUrl" "$SHA1" "$targetFolder" "$appPrefix"
 
+echo "Adding MQTT broker path to environment"
+sed -i "1iexport MQTT_TEST_BROKER_LOCATION=$targetFolder/interoperability/startbroker.py" ~/.bashrc

coin/provisioning/common/msvc_2015_update3_patch.ps1

@@ -30,7 +30,7 @@
 ## $QT_END_LICENSE$
 ##
 #############################################################################
-. "$PSScriptRoot\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
 # Install Cumulative Servicing Release Visual Studio 2015 update 3
 # Original download page: https://msdn.microsoft.com/en-us/library/mt752379.aspx

coin/provisioning/common/mysql.ps1

@@ -57,6 +57,11 @@ function DownloadAndInstall
     Remove-Item $package
 }
 
+# Remove any leftovers
+try {
+    Rename-Item -ErrorAction 'Stop' c:\utils\my_sql c:\utils\mysql_deleted
+} catch {}
+
 if( (is64bitWinHost) -eq 1 ) {
     # Install x64 bit version
     $architecture = "x64"

coin/provisioning/common/ninja.ps1

@@ -0,0 +1,12 @@
+. "$PSScriptRoot\helpers.ps1"
+
+$zip = "c:\users\qt\downloads\ninja-1.6.0-win-x86.zip"
+
+Download https://github.com/ninja-build/ninja/releases/download/v1.6.0/ninja-win.zip \\ci-files01-hki.ci.local\provisioning\ninja\ninja-1.6.0-win-x86.zip $zip
+Verify-Checksum $zip "E01093F6533818425F8EFB0843CED7DCAABEA3B2"
+
+Extract-Zip $zip C:\Utils\Ninja
+Remove-Item $zip
+
+$machinePath = [Environment]::GetEnvironmentVariable('Path', [EnvironmentVariableTarget]::Machine)
+[Environment]::SetEnvironmentVariable("Path", $machinePath + ";C:\Utils\Ninja", [EnvironmentVariableTarget]::Machine)

coin/provisioning/common/openssl.ps1

@@ -31,7 +31,7 @@
 ##
 #############################################################################
 
-. "$PSScriptRoot\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
 # This script installs OpenSSL $version.
 # Both x86 and x64 versions needed when x86 integrations are done on x64 machine

coin/provisioning/common/postgresql.ps1

@@ -48,6 +48,11 @@ if( (is64bitWinHost) -eq 1 ) {
     $internalUrl = "\\ci-files01-hki.intra.qt.io\provisioning\windows\postgresql-$version-windows-x64-binaries.zip"
     $sha1 = "4da0453cdfda335e064d4437cf5bb9d356054cfd"
 
+    # Delete any leftovers
+    try {
+        Rename-Item -ErrorAction 'Stop' c:\utils\postgresql c:\utils\postgresql-deleted
+    } catch {}
+
     echo "Fetching from URL ..."
     Download $externalUrl $internalUrl $packagex64
     Verify-Checksum $packagex64 $sha1

coin/provisioning/common/python3.ps1

@@ -46,12 +46,12 @@ $install_path = "C:\Python36"
 if ( $archVer -eq 64 ) {
     echo "Running in 64 bit system"
     $externalUrl = "https://www.python.org/ftp/python/$version/python-$version-amd64.exe"
-    $internalUrl = "http://ci-files01-hki.intra.qt.io/input/windows/python-$version-amd64.exe"
+    $internalUrl = "http://ci-files01-hki.ci.local/input/windows/python-$version-amd64.exe"
     $sha1 = "bf54252c4065b20f4a111cc39cf5215fb1edccff"
 }
 else {
     $externalUrl = "https://www.python.org/ftp/python/$version/python-$version.exe"
-    $internalUrl = "http://ci-files01-hki.intra.qt.io/input/windows/python-$version.exe"
+    $internalUrl = "http://ci-files01-hki.ci.local/input/windows/python-$version.exe"
     $sha1 = "76c50b747237a0974126dd8b32ea036dd77b2ad1"
 }
 

coin/provisioning/common/python3.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 #############################################################################
 ##
@@ -37,9 +37,8 @@
 # This script installs python3
 
 source "${BASH_SOURCE%/*}/InstallPKGFromURL.sh"
-source "${BASH_SOURCE%/*}/../unix/SetEnvVar.sh"
 
-PrimaryUrl="http://ci-files01-hki.intra.qt.io/input/mac/python-3.6.1-macosx10.6.pkg"
+PrimaryUrl="http://ci-files01-hki.ci.local/input/mac/python-3.6.1-macosx10.6.pkg"
 AltUrl="https://www.python.org/ftp/python/3.6.1/python-3.6.1-macosx10.6.pkg"
 SHA1="ae0c749544c2d573c3cc29c4c2d7d9a595db28f9"
 DestDir="/"
@@ -48,7 +47,6 @@ InstallPKGFromURL "$PrimaryUrl" "$AltUrl" "$SHA1" "$DestDir"
 
 /Library/Frameworks/Python.framework/Versions/3.6/bin/pip3 install virtualenv
 
-SetEnvVar "PYTHON3_PATH" "/Library/Frameworks/Python.framework/Versions/3.6/bin"
-SetEnvVar "PIP3_PATH" "/Library/Frameworks/Python.framework/Versions/3.6/bin"
-
+echo "export PYTHON3_PATH=/Library/Frameworks/Python.framework/Versions/3.6/bin" >> ~/.bashrc
+echo "export PIP3_PATH=/Library/Frameworks/Python.framework/Versions/3.6/bin" >> ~/.bashrc
 echo "python3 = 3.6.1" >> ~/versions.txt

coin/provisioning/common/ruby.ps1

@@ -0,0 +1,7 @@
+. "$PSScriptRoot\helpers.ps1"
+
+$installer = "c:\users\qt\downloads\rubyinstaller-2.3.1.exe"
+
+Download https://dl.bintray.com/oneclick/rubyinstaller/rubyinstaller-2.3.1.exe http://ci-files01-hki.ci.local/input/ruby/rubyinstaller-2.3.1.exe $installer
+Verify-Checksum $installer "FF377F6F313849C3B0CD72EEC1EFFA436F0E4A36"
+& $installer /DIR=C:\ruby /VERYSILENT

coin/provisioning/common/set-network-test-server.ps1

@@ -31,11 +31,11 @@
 ##
 #############################################################################
 
-. "$PSScriptRoot\helpers.ps1"
+. "$PSScriptRoot\..\common\helpers.ps1"
 
 # This script will set the network test server IP in to hosts file
 
-$n = Get-Content "$PSScriptRoot\..\shared\network_test_server_ip.txt"
+$n = Get-Content "$PSScriptRoot\network_test_server_ip.txt"
 $n = $n.Split('=')
 New-Variable -Name $n[0] -Value $n[1]
 

coin/provisioning/common/system_updates.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 #############################################################################
 ##

coin/provisioning/common/try_catch.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 #############################################################################
 ##

coin/provisioning/common/unix/disable-ntp_macos.sh

@@ -1,40 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2018 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-set -ex
-
-echo "Disable Network Time Protocol (NTP)"
-echo "sudo launchctl unload /System/Library/LaunchDaemons/org.ntp.ntpd.plist" >> /Users/qt/.bash_profile
-

coin/provisioning/common/unix/http_proxy.txt

@@ -1,2 +0,0 @@
-proxy="http://proxy.intra.qt.io:3128"
-

coin/provisioning/common/unix/squishInstall.sh

@@ -1,211 +0,0 @@
-#!/usr/bin/env bash
-
-#############################################################################
-##
-## Copyright (C) 2017 The Qt Company Ltd.
-## Contact: http://www.qt.io/licensing/
-##
-## This file is part of the provisioning scripts of the Qt Toolkit.
-##
-## $QT_BEGIN_LICENSE:LGPL21$
-## Commercial License Usage
-## Licensees holding valid commercial Qt licenses may use this file in
-## accordance with the commercial license agreement provided with the
-## Software or, alternatively, in accordance with the terms contained in
-## a written agreement between you and The Qt Company. For licensing terms
-## and conditions see http://www.qt.io/terms-conditions. For further
-## information use the contact form at http://www.qt.io/contact-us.
-##
-## GNU Lesser General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU Lesser
-## General Public License version 2.1 or version 3 as published by the Free
-## Software Foundation and appearing in the file LICENSE.LGPLv21 and
-## LICENSE.LGPLv3 included in the packaging of this file. Please review the
-## following information to ensure the GNU Lesser General Public License
-## requirements will be met: https://www.gnu.org/licenses/lgpl.html and
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-##
-## As a special exception, The Qt Company gives you certain additional
-## rights. These rights are described in The Qt Company LGPL Exception
-## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-##
-## $QT_END_LICENSE$
-##
-#############################################################################
-
-source "${BASH_SOURCE%/*}/try_catch.sh"
-
-set -ex
-
-# This script will install squish package for Linux and Mac.
-# Squish is need by Release Test Automation (RTA)
-
-version="6.3.0"
-# Branch version without dot
-qtBranch="59x"
-squishFolder="/opt/squish"
-squishUrl="ci-files01-hki.intra.qt.io:/hdd/www/input/squish/coin/$qtBranch/"
-squishFile="squish-$version-qt$qtBranch-linux64.run"
-if uname -a |grep -q Darwin; then
-     squishFile="squish-$version-qt$qtBranch-macx86_64.dmg"
-fi
-
-squishLicenseUrl="ci-files01-hki.intra.qt.io:/hdd/www/input/squish/coin/"
-squishLicenseFile=".squish-3-license.tar.gz"
-
-# These checks can be removed when Vanilla OS for all linux and Mac are in
-if [ -d "$squishFolder" ]; then
-    echo "Move old squish to /tmp"
-    sudo mv "$squishFolder" "/tmp/squish_$(date)"
-fi
-
-if [ -f "/etc/profile.d/squish_env.sh" ]; then
-    echo "Remove /etc/profile.d/squish_env.sh"
-    sudo rm -f "/etc/profile.d/squish_env.sh"
-    export SQUISH_LICENSEKEY_DIR=$HOME
-fi
-
-ExceptionMount=100
-ExceptionCreateFolder=101
-ExceptionUncompress=102
-ExceptionUnknownFormat=103
-ExceptionCopy=104
-ExceptionUmount=105
-ExceptionHdiutilAttach=106
-ExceptionInstallSquish=107
-ExceptionChangeOwnership=108
-
-function MountAndInstall {
-
-    url=$1
-    targetDirectory=$2
-    targetFile=$3
-
-    # Check which platform
-    if uname -a |grep -q Darwin; then
-        usersGroup="staff"
-        mountFolder="/Volumes"
-        squishLicenseDir="/Users/qt"
-    elif uname -a |grep -q "el6\|el7"; then
-        usersGroup="qt"
-        mountFolder="/tmp"
-        squishLicenseDir="/root"
-    elif uname -a |grep -q "Ubuntu"; then
-        usersGroup="users"
-        mountFolder="/tmp"
-        squishLicenseDir="/home/qt"
-    else
-        usersGroup="users"
-        mountFolder="/tmp"
-        squishLicenseDir="/root"
-    fi
-
-    targetFileMount="$mountFolder"/"$targetFile"
-
-    try
-    (
-        echo "Mounting $url to $mountFolder"
-        sudo mount "$url" $mountFolder || throw $ExceptionMount
-        echo "Create $targetDirectory if needed"
-        if [ !  -d "/opt" ]; then
-            sudo mkdir "/opt" || throw $ExceptionCreateFolder
-        fi
-        if [ !  -d "$targetDirectory" ]; then
-            sudo mkdir "$targetDirectory" || throw $ExceptionCreateFolder
-        fi
-        echo "Uncompress $targetFile"
-        if [[ $targetFile == *.tar.gz ]]; then
-            if [[ $targetFile == .squish-3-license.* ]]; then
-                target="$squishLicenseDir"
-                # Squish license need to be exists also in users home directory, because squish check it before it starts running tests
-                sudo tar -xzf "$targetFileMount" --directory "$HOME" || throw $ExceptionUncompress
-            else
-                target="$targetDirectory"
-            fi
-            sudo tar -xzf "$targetFileMount" --directory "$target" || throw $ExceptionUncompress
-            echo "Unmounting $mountFolder"
-            sudo umount $mountFolder || throw $ExceptionUmount
-        elif [[ $targetFile == *.dmg ]]; then
-            echo "'dmg-file', no need to uncompress"
-            sudo cp $targetFileMount /tmp || throw $ExceptionCopy
-            sudo umount $mountFolder || throw $ExceptionUmount
-            sudo hdiutil attach "/tmp/$targetFile" || throw $ExceptionHdiutilAttach
-            sudo /Volumes/froglogic\ Squish/Install\ Squish.app/Contents/MacOS/Squish unattended=1 targetdir="$targetDirectory/package" qtpath="$targetDirectory" || throw $ExceptionInstallSquish
-            sudo hdiutil unmount /Volumes/froglogic\ Squish/
-        elif [[ $targetFile == *.run ]]; then
-            echo "'run-file', no need to uncompress"
-            sudo cp $targetFileMount $targetDirectory || throw $ExceptionCopy
-            sudo umount $mountFolder || throw $ExceptionUmount
-            sudo $targetDirectory/$targetFile unattended=1 targetdir="$targetDirectory/package" qtpath="$targetDirectory" > /dev/null 2>&1 || throw $ExceptionInstallSquish
-            sudo rm -fr "$targetDirectory/$targetFile"
-            if uname -a |grep -q "Ubuntu"; then
-                sudo mkdir /usr/lib/tcl8.6 || throw $ExceptionCreateFolder
-                sudo cp "$targetDirectory/package/tcl/lib/tcl8.6/init.tcl" /usr/lib/tcl8.6/ || throw $ExceptionCopy
-            fi
-        else
-            throw $ExceptionUnknownFormat
-        fi
-
-        echo "Changing ownerships"
-        sudo chown -R qt:$usersGroup "$targetDirectory" || throw $ExceptionChangeOwnership
-        sudo chown qt:$usersGroup "$HOME/.squish-3-license"
-
-    )
-
-    catch || {
-        case $ex_code in
-            $ExceptionMount)
-                echo "Failed to mount $url to $mountFolder."
-                exit 1;
-            ;;
-            $ExceptionCreateFolder)
-                echo "Failed to create folder"
-                exit 1;
-            ;;
-            $ExceptionUncompress)
-                echo "Failed extracting compressed file."
-                exit 1;
-            ;;
-            $ExceptionUnknownFormat)
-                echo "Unknown file format."
-                exit 1;
-            ;;
-            $ExceptionCopy)
-                echo "Failed to copy"
-                exit 1;
-            ;;
-            $ExceptionUmount)
-                echo "Failed to unmount $mountFolder."
-                exit 1;
-            ;;
-            $ExceptionHdiutilAttach)
-                echo "Failed to hdituli attach $mountFolder/$targetFile."
-                exit 1;
-            ;;
-            $ExceptionInstallSquish)
-                echo "Failed to install squish"
-                exit 1;
-            ;;
-            $ExceptionChangeOwnership)
-                echo "Failed to change ownership of $targetDirectory."
-                exit 1;
-            ;;
-        esac
-    }
-}
-
-echo "Set commands for environment variables in .bashrc"
-
-if uname -a |grep -q "Ubuntu"; then
-    echo "export SQUISH_PATH=$squishFolder/package" >> ~/.profile
-    echo "export PATH=\$PATH:$quishFolder/squish-$version/bin" >> ~/.profile
-else
-    echo "export SQUISH_PATH=$squishFolder/package" >> ~/.bashrc
-    echo "export PATH=\$PATH:$quishFolder/squish-$version/bin" >> ~/.bashrc
-fi
-
-echo "Installing squish license to home directory.."
-MountAndInstall "$squishLicenseUrl" "$squishFolder" "$squishLicenseFile"
-
-echo "Installing squish $version.."
-MountAndInstall "$squishUrl" "$squishFolder" "$squishFile"

coin/provisioning/common/vc_redist.ps1

@@ -43,13 +43,13 @@ if ( $archVer -eq 64 ) {
     echo "Running in 64 bit system"
     $arch = "x64"
     $externalUrl = "https://download.microsoft.com/download/9/3/F/93FCF1E7-E6A4-478B-96E7-D4B285925B00/vc_redist.x64.exe"
-    $internalUrl = "http://ci-files01-hki.intra.qt.io/input/windows/vc_redist.x64.exe"
+    $internalUrl = "http://ci-files01-hki.ci.local/input/windows/vc_redist.x64.exe"
     $sha1 = "3155cb0f146b927fcc30647c1a904cd162548c8c"
 }
 else {
     $arch = "x86"
     $externalUrl = "https://download.microsoft.com/download/9/3/F/93FCF1E7-E6A4-478B-96E7-D4B285925B00/vc_redist.x86.exe"
-    $internalUrl = "http://ci-files01-hki.intra.qt.io/input/windows/vc_redist.x86.exe"
+    $internalUrl = "http://ci-files01-hki.ci.local/input/windows/vc_redist.x86.exe"
     $sha1 = "bfb74e498c44d3a103ca3aa2831763fb417134d1"
 }
 

coin/provisioning/common/version.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/env bash
 
 #############################################################################
 ##