With value 100 the sccache would provision between 10 and 20, which
might lead to unexpected behavior.
Change-Id: I3143d2102ff03c744476910dffdb924ca3164d26
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
"_ARCH_" was dynamically replaced by either 32 or 64 in
qttools/configure.pri. Anyhow, this is not supported by the
CMake build, and not needed, since we only build with 64
toolchains on Windows.
the qmake builds can still automatically select the "right"
toolchain by either loading LLVM_INSTALL_DIR_msvc,
LLVM_INSTALL_DIR_mingw. But for CMake builds
we now explicitly set LLVM_INSTALL_DIR in each configuration.
Fixes: QTBUG-87215
Change-Id: Iaa7e6eab676c03b34ea723d9f71888ca9ee7bb1f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Replicate the instructions that Coin does for qmake configurations.
Build all of qttools and its dependencies and then build the top-level
docs.
Task-number: QTBUG-87012
Change-Id: Iac70172cf13d8943e60c26a1f2ee3ddf5bae6667
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This is the top-level counterpart change that uses the infra
introduced in qtbase.
Task-number: QTBUG-88086
Change-Id: I2524cd88da43cffb2b3742caedd1cd2f3130dff5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Builds are passing, but tests still failing
Task-number: QTQAINFRA-3949
Change-Id: Ieca2512e06ca09cabf042ee3c966dae65c9e5e86
Reviewed-by: Simo Fält <simo.falt@qt.io>
This change will upgrade the msys2 package
Change also updates the script to use cached
prebuilt package if available.
This will also remove unneeded x86 installation
Pick-to: 5.15
Pick-to: 5.12
Task-number: QTQAINFRA-3986
Change-Id: Ia6299f9d4750376676276a75613e7f1098de4102
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Need to include a fix in qtquick3d for cmake developer build on
Ubuntu 20.04.
Change-Id: I18b87aef320fc3b36d1383ff58efff51a605bc71
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
Builds are passing now with Ubuntu 20.04, but tests are still failing.
Let's set Insignificant flag to affect only to test phase.
Change-Id: Ib9b4d652c9518d59d6a36c58b3a11f40ce777a74
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Builds are passing now and almost all autotests. Let's set insignificant
flag to affect only test phase for now.
Task-number: QTQAINFRA-3065
Change-Id: Icd233ef58bf92ec9ebfb6b56e163c16aad045bbd
Reviewed-by: Toni Saario <toni.saario@qt.io>
Ipv6 link local becomes tentative and dadfailed if two systems
has the same secret_key. New unique secret key will be generated
automatically during boot up
Task-number: QTBUG-84254
Change-Id: Ic229c4e0ffd5bb708894131238a70c04eb1b5b98
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This doubles the amount of processor power given to the VMs. This
mirrors what Coin does when it detects a -debug-and-release flag in
the configure flags when doing a qmake Qt build.
Change-Id: I33a5c6a50a4ac279d097664d145439c856f132ec
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Toni Saario <toni.saario@qt.io>
...to prepare switching the default from qmake to CMake.
Task-number: QTBUG-87049
Change-Id: I0f17e65cead99d2b7bf3191b1bfc96cee7d089e9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The power-shell scripts don't need to be executable (MS-Win doesn't
care and we don't run them on Unix).
The shbang line in a shell script only works if it's at the start of
the file, not after a blank line.
Change-Id: I12a927f414621187f867864617276528a59652e5
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Needed by webengine which broke from the switch from RHEL to CentOS.
Change-Id: I1f0b855b73716e0e2133be895e55000d72658962
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Windows don't allow insecure guest login anymore by default. It need
to be enabled through Group Policy restrictions
Pick-to: 5.15
Pick-to: 5.12
Task-number: QTQAINFRA-3980
Change-Id: I767e9c87ca3ee4737e312142ecefb94ee2b2b828
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Also disable warnings_are_errors. That's the way it is in the qmake CI
config. It was probably an oversight.
Fixes: QTBUG-85438
Change-Id: Id6e6a778dca1bfc5c13289e3f55048ce515e923f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Windows don't allow insecure guest login anymore by default. It need
to be enabled through Group Policy restrictions
Pick-to: 5.15
Pick-to: 5.12
Task-number: QTQAINFRA-3974
Change-Id: I5fd918882c51c01985cd4c1b9f9ed4dec62e07dd
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Pass -DFEATURE_msvc_obj_debug_info=ON to enable the /Z7 flag
compilation flag, which will embed debug info into the .obj files,
thus enabling usage of sccache for MSVC CI configs.
Task-number: QTQAINFRA-3934
Change-Id: I151eece0e35ebee8df0c58641727219ee40a7409
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Toni Saario <toni.saario@qt.io>
Insignificant flag is added for two targets. RedHat 7.6
will be kept as parallel until insignificant flag can be
removed from CentOS
Task-number: QTQAINFRA-2760
Task-number: QTQAINFRA-3065
Change-Id: If124600309644e6a066805cd728bf12862006a21
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
To ensure that examples can be built with an xcode project
generated by qmake, we have to ship both debug and release
libraries.
So use Ninja Muli-Config to build both configs.
Note we build Release and not RelWithDebInfo on purpose, so we
don't inflate the package size too much due to the embedded debug
information.
We can probably switch to RelWithDebInfo once we implement the
separate_debug_info feature for static builds.
Fixes: QTBUG-87638
Change-Id: I3e26cd0e47fc96fbdee8b3b0177f78fa266b8cc4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
While building Clang 11 for Qt the tests failed due to missing Perl
Digest-MD5 package.
Pick-to: 5.15
Change-Id: Iba4156db65ec53bf465ca5b132e6983f1176bc41
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Target are already ported to cmake and qmake
target is failing with CentOS which will replace
Redhat
Change-Id: I792ae826c96012a10050ca07a071e01780f54f0c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
qt3d, qtimageformats and qtnetworkaut will be delivered via package
manager so those shouldn't be in qt5.git integrations from Qt 6.0 ->
Task-number: QTBUG-87255
Change-Id: I2ddaf561123153b78b4bd972c22a90ba1309a91d
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
This is needed to ensure that the auto-detection runs before any
toolchain file is loaded, like in a stand-alone qtbase build.
This fixes the issue that we had to specify ANDROID_STL=c++_shared in a
top-level build, even though it's properly defaulted in
QtAutoDetect.cmake.
Task-number: QTBUG-87309
Change-Id: I8ced2213ca2e5a877bfd210e59da4ef4d6c8ac74
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The subdirectories, the top-level CMakeLists.txt adds, contain
find_package(Qt6 COMPONENTS ...) calls. When cross-compiling to Android,
the toolchain file sets CMAKE_FIND_ROOT_PATH and
CMAKE_FIND_ROOT_PATH_MODE to ONLY. That means, the packages that are
created in qtbase can never be found by other Qt repositories, e.g.
qtdeclarative.
Append the qtbase build dir to CMAKE_FIND_ROOT_PATH to find the Qt
packages of the build dir when cross-compiling. Because of some CMake
idiosyncracy, we need to append "${QtBase_BINARY_DIR}/lib/cmake" to
CMAKE_PREFIX_PATH and not just "${QtBase_BINARY_DIR}". See
qtbase/ec90f9013b4c6b63d7e03a964f66f97329be7885 for details.
Task-number: QTBUG-85080
Change-Id: I799f851316538c310d73f5ab59c809229e16e8a8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is a left-over from before the bin, lib, ... directories were moved
to the qtbase build directory.
Change-Id: I24bfa36289648288b2b44cc809e0c390cd2c043b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
While bulding on CentOS with Red Hat libclang packages we end up with
linker errors due to differences in C++ ABI used.
Ubuntu 18.04 package works fine with CentOS 8.1.
Task-number: QTBUG-86968
Change-Id: Idf0435a06046fb791b8ca1086e6465521ba6006a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
To get at least some build coverage in CI, otherwise it fails to build
in qtbase.
Task-number: QTBUG-83968
Change-Id: Ifc67d3e98c0a00ad94211f8d73efa30a35eb0e14
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Toni Saario <toni.saario@qt.io>
qemu can't emulate the feature properly, and that causes many tests
that use QProcess to fail. Use the newly introduced feature in qtbase
to disable the feature for qemu configurations.
Task-number: QTBUG-86285
Task-number: QTBUG-86187
Task-number: QTBUG-86198
Change-Id: Iecd5c64f6f2e98e5c5ab893b50a1fee2bc10108f
Reviewed-by: Toni Saario <toni.saario@qt.io>
Visual Studio 2019 can be updated with version specific online installer
Change-Id: I1ec1f96e68e8e3440d85240d09eec59a421708db
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Currently GCC versions which comes with the system are missing from
versions.txt. This change will add those
Task-number: QTQAINFRA-3933
Change-Id: I1934e6257acf92d72dcb382884aad60503b7b32f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The license should be GPLv3-EXCEPT, like for the same file in qtbase.
Pick-to: 5.15
Change-Id: I59c63c0a693394dc9f8de4706c2e113fe2ea4130
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The sccache can also be used to speed up building tests. Test related
Environment variables are read by instructions and appended to tests
CMake call by: 7545511e37d69a119bbec861226700832799331f
Change-Id: I9b350f73b89e15d6b372417335acbf2312b67691
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The open-vm-tools causes segfault during boot and dumping the core
freezes agent execution for the time being causing failures on
commands with short timeout.
Change-Id: Iff8807d1332b7a6d046b5a5d7d606552ebe48807
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
This causes VM slowness during the boot and the agent initialization.
Change-Id: I08ab4d56131f12af85847802230a5446a5e6fa29
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Android targets, QEMU and the Ubuntu are capable of caching artifacts.
Change-Id: I417b7e9b7bd85fb21cce6dfbb2ac8985faba58eb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This version should fix the iOS PCH builds and Ninja Multi-Config,
as well as the issues with AUTOMOC and Ninja.
Temporarily explicitly disable the pkg_config feature on Windows
hosts, because otherwise the configuration will break. The
FindPkgConfig module in 3.18 has some additional behavior for checking
if the found pkg-config works, and that's not handled by our
qt_build_internals_disable_pkg_config_if_needed function in qtbase.
Fixes: QTBUG-86862
Change-Id: I80514d3d7896ae09ab252aed10e86725fae0cc9c
Reviewed-by: Toni Saario <toni.saario@qt.io>
This will install STM32CubeProgrammer to Windows 10 needed by
MCU RTA
Task-number: UL-3091
Change-Id: I97f7df33af9bf4c56849c1cf3c93b3a413ba6f44
Reviewed-by: Milla Pohjanheimo <milla.pohjanheimo@qt.io>
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
Based on default with a few unsupported platforms removed
Change-Id: I8edfa83f3cc09172c041e8dd6adaf96666d0238d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
MCUXpresso IDE provides the tools for flashing and onboard debugging
Task-number: UL-3091
Change-Id: I05224af4ae7528f219f1b682ecd14bd0e331e3bf
Reviewed-by: Milla Pohjanheimo <milla.pohjanheimo@qt.io>
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
Cloned VM generate same IPv6 link local addresses as the original host.
The approach of generating link-local IPv6 address can be changed
per-interface from stable-secret to based on MAC. This change will
remove IPV6_ADDR_GEN_MODE line which should be enough to change
default stable-secret to based on MAC.
Task-number: QTBUG-84254
Change-Id: I9455a8b11902d35517f43228b4ef63a884ca7522
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Adds the missing Windows host Android target configurations.
Each android architecture we support is re-added as a separate
configuration, because CMake builds currently don't support multi-abi
builds as tracked in QTBUG-80943.
Task-number: QTBUG-86053
Task-number: QTBUG-85911
Change-Id: I421c6fc726a4813dbab5fcd67961ae4124eccb13
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This partially reverts 37cb787dc1
because it reintroduces the macOS host Android configs which were
removed due to qtbase std::pair shenanigans.
Each android architecture we support is re-added as a separate
configuration, because CMake builds currently don't support multi-abi
builds as tracked in QTBUG-80943.
Task-number: QTBUG-84924
Task-number: QTBUG-86053
Change-Id: Iac48ab41a1eb9cf1e4219f62683355d1bb9a9891
Reviewed-by: Liang Qi <liang.qi@qt.io>
It wasn't added before, because it didn't build due to an issue
in qtbase regarding qdrawhelper.cpp and avx2, which is now fixed
in ff1a44be33f4bc05d502a2ca49171e0408992f61 in qtbase.
Task-number: QTBUG-86053
Change-Id: I425e6a81840276a850bd95db45d5ecdfae5487a8
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
* Update libjpeg-turbo to 2.0.5
* Replace MinGW 7 packages with MinGW 8
* Remove zlib packages as Qt is consistently built with -qt-zlib now
Task-bumber: QTQAINFRA-3916
Change-Id: Ib3355265dc35326d30eacb60d0e3c97f06e6f9be
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Btrfs use lot's of CPU while running
Task-number: QTQAINFRA-3919
Change-Id: I08b89b57c92d90f752dde76375711e61ed173c2c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
fstrim scans the filesystem and sends 'UNMAP' commands for each
unused block it finds. Let's disable it so it won't cause unexpected
situations.
Task-number: QTQAINFRA-3919
Change-Id: I20c97441fd47728a3063ae50f87fe6347186bdbd
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Win10 x86 archive was missing msvc142 x86 package.
Pick-to: 5.15
Change-Id: I532c3a1129d75968c22b721390ff474548e642bf
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
QtWayland looks for WaylandScanner. If QtBase is installed our CMake
find files will be installed and everything will work correctly.
If QtBase is not installed yet or out of date, we need to add our source
cmake files to the search path. We currently add one of the 3rd party
directories, but not the subdirectories.
Change-Id: I53ce26b5b21b7e5e74752c730bca90295147f851
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Apparently qmake doesn't actually use the env var, but this failed
the WIP CMake Android configurations.
Amends e3600116b3
Change-Id: I30866af0eb63efefe72b709182f8cb5ba3250b12
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
In Qt 5 times, qmake was able to build libraries for multiple Android
ABIs in one build tree.
In Qt 6.0 + CMake we can't do that yet, which is tracked in
QTBUG-80943.
We still need to build and ship libraries for all the ABIs, so use the
old style approach of one configuration per ABI.
Add some of the missing ABIs for the Linux host case:
arm64-v8a, armeabi-v7a, x86.
The x86_64 ABI will be added in a separate change, due to a bug in
qtbase regarding Gui's qdrawhelper.cpp and avx2.
Because it's a lot of copy pasting, move the configs into a separate
yaml file so it's easier to search and replace in the future.
Task-number: QTBUG-86053
Change-Id: If8419ce20ac033b644c49c0bac70196cd30fd679
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Toni Saario <toni.saario@qt.io>
Now that we reuse host artifacts, there's no point in specifying host
configure arguments on target configurations, they aren't used.
Remove them to avoid confusion.
Change-Id: I176fe421bc36772cb29929c082ea76946210f98b
Reviewed-by: Toni Saario <toni.saario@qt.io>
Python installation is flaky and we haven't be able to determine the
root cause for it. Re-running the installation might help.
(Might) because we can't reproduce this manually.
Task-number: QTQAINFRA-3875
Change-Id: Id46d250a02e01007f03dfbb886d75b23c23a6216
Reviewed-by: Toni Saario <toni.saario@qt.io>
Add Squish for Web installation, update Squish license.
Pick-to:5.15
Change-Id: Id418830e82718afc20ac7390400342a6b0401a64
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
This reverts commit 59f141ec3c.
Reason for revert: Provisioning will continue even if python installation fails
Change-Id: Iaa0a48a2179c2198a32fb9a4feb55266cc64c396
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Print verbose, debugging and error messages to log in case of installer
failure.
Task-number: QTQAINFRA-3875
Change-Id: I2a701a655bd5e9b434011d3c68a2d8a31e119103
Reviewed-by: Toni Saario <toni.saario@qt.io>
Add a new Ubuntu 20.04 host to be used for the qemu configs.
We might be able to use the RHEL 7.6 host artifacts for qemu target
configs, but i'd rather we test on the same distro / OS for both
host and target.
Use the macOS host for iOS builds.
Task-number: QTBUG-85623
Change-Id: I6305f924b843a5a832bd94e5060211583c9c7f98
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Latest Windows 10 v2004 needs more sleep for msys2 installation so that
gpg-agent will be killed after the installation process is finished.
Otherwise the provisioning won't continue and it will fail to timeout.
Task-number: QTQAINFRA-3691
Change-Id: I8b214415e777845e9ff711c1de9b09553b715d92
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
These are missing from the initial patch:
716144073c
And currently block qtbase integrations.
Change-Id: Ife192aebf93b6344ff0341aed275ea2e104c6799
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This CMake version among other things, fixes a bug with
Ninja Multi-Config writing into the same response file
on Windows, which can cause wrong libraries to be linked
(mixing Debug and Release libs).
Also disable PCH for iOS configs, because that seems to be broken
again.
We can't upgrade to 3.18.2 because that breaks iOS PCH in a different
way than 3.17.4, and because of an AUTOMOC regression introduced when
using Ninja Multi-Config.
Fixes: QTBUG-85586
Change-Id: I04c08d3a8bfb88433f2d50f4d41d11fc0df3d7ec
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Add various CMake configuration flags to enable building of the same
sql plugins that the qmake configurations do.
While qmake has various introspection mechanisms for finding plugins
inside
qtbase/src/plugins/sqldrivers/configure.json and configure.pri,
in CMake-land we sometimes need to be explicit and pass 3rd party lib
paths, so that the FindFoo.cmake modules successfully find the
libraries.
Sometimes it's not necessary because the find modules also do some
introspection in default paths like looking /usr on Linux, or
'C:\Program Files' on Windows.
While some qmake configs provide mysql path hints (like on Windows),
the plugin is actually disabled on purpose due to licensing issues
as per a05bd71ede and QTBUG-76081.
Also the qmake configs specifying arguments like -plugin-sql-sqlite
and -plugin-sql-odbc is redundant. These switches force enable the
corresponding features in src/plugins/sqldrivers/configure.json,
but it's actually not necessary because all the features (except
system sqlite3) are auto-detected and enabled if the actual 3rd party
library is found. The same is the case for the CMake build, so there's
no need to manually enable the features.
While the qmake qemu configs don't explicitly disable the mysql plugin
and actually provide a Yocto SDK mysql path via -mysql_config,
the library does not end up being found. It's unclear whether this is
a bug (despite the licensing issue mentioned above) or on purpose.
But the CMake build doesn't find it either, so it's consistent.
And I suppose -psql_config /dev/null is meant to disable the
postgresql plugin on QEMU configs. The QEMU CMake build doesn't find
the postgresql library by default anyway, so the result is also
consistent.
Sql plugins built per packaging config:
macOS: odbc, postgres, bundled sqlite
RHEL: odbc, postgres, bundled sqlite
Win10 MSVC x64: odbc, postgres, bundled sqlite
Win10 MinGW x64: odbc, postgres, bundled sqlite
Android any arch: bundled sqlite
iOS: bundled sqlite
QEMU any arch: bundled sqlite
Task-number: QTBUG-86053
Change-Id: Ic759eb29fc5350cbdfe2825817af74767c4fb12a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The -no-qpa-platform-guard configure argument is deprecated and has no
effect.
Pick-to: 5.15
Change-Id: I132ccdf036c52baf54cf0c789fa063cc0455ce09
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The sccache may significantly reduce build times.
We need to evaluate real cases to see how much is to gain.
This patch enables sccache only on cmake, exluding one msvc target
with debug flag -Zi, which creates separate debug symbols.
Related sccache issue:
https://github.com/mozilla/sccache/issues/242
Task-number: COIN-130
Done-with: Aapo Keskimolo <aapo.keskimolo@qt.io>
Change-Id: Ic1f599c5194bcdee9528a548dabead1097821cd1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We will ship pre-built binaries for minGW in Qt6 as well so add
packaging feature in it as well
Change-Id: I7b506fd0c8227cef478f461e02ae1d4549f0a507
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Earlier we set the env variable point to latest Python install. It
did work by accident, while the default python was installed as last.
Now each python install has its own matching ENV variable that can
be used buildtime. The PYTHON3_WHEEL_CACHE will now point to 64 bit
default Python3, while the variable is already used in Qt codebase.
Pick-to: 5.15
Change-Id: I6a67936c06ed0209ef9e903120f2416aaa8eb3ff
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Move the configuration from qtbase into a new
cmake_platforms_qemu.yaml file, and include it in qtbase and qtsvg.
Also enable CMAKE_AUTOGEN_VERBOSE to see what moc is being called
and with what parameters.
Task-number: QTBUG-83968
Change-Id: Ib893c6f8cb498b9b5c7da79218de22a28ffdb83f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In many cases without waiting, next script would be missing network
and fails.
Pick-to: 5.15
Change-Id: Iab50945716860618b495029ce179183d844dc98a
Reviewed-by: Simo Fält <simo.falt@qt.io>
There is no 32 bit win10 configurations in CI, so we do not verify
any of the provisioning changes on it.
Pick-to: 5.15
Change-Id: I1c1e183908ffb09be4e2992ccbd1da7af2640181
Reviewed-by: Toni Saario <toni.saario@qt.io>
This installs Python 3.8.1 to be used with Qt for Python. It keeps
the old 3.6 as a default python3.
Pick-to: 5.15
Change-Id: I8ea121514f6a4092f700688363c282cbea37a75b
Reviewed-by: Toni Saario <toni.saario@qt.io>
CMake is picking up libtiff from the provisioned Strawberry Perl location.
Specify -DFEATURE_system_tiff=OFF in the NON_QTBASE_CONFIGURE_ARGS to
disable usage of that library, and thus fix the crashing test.
Amends 4b4f0be08d
Task-number: QTBUG-84886
Change-Id: Iecc880d367db76e91f8c5f92b0849f1ad43382a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The qtbase Coin instructions will start reading the values of the
environment variables NON_QTBASE_CONFIGURE_ARGS and
NON_QTBASE_TARGET_CONFIGURE_ARGS.
These are used to pass configure args to repositories other
than qtbase to allow disabling certain features per-repo.
Unfortunately we have to explicitly set the env var values to empty
strings so that the instructions work correctly, otherwise Coin
replaces them with a '<no value>' token, which breaks the
CMake configuration phase.
For some reason the issue only happens on the Windows MSVC
configuration, but we set them for the other configurations as well
to avoid any future breakages.
Task-nunber: QTBUG-84886
Change-Id: I4b095f71c6e484a0e67a53eb6ea9d5ca4f2a6a0c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Updated to match new default configurations.
Change-Id: I536454b5c3de4a4917cb8d1f0b391fbb20e6f8d1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The cmake platform was not updated when other platform were updated
to use -17 image.
Change-Id: Ide69d7d6119f472529570960021de9f05e53d8bd
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Disabling LSO from the adapter gives us huge performance boosts
on Windows. In our tests 2 VMs within the same hosts had transfer
speeds of 30 Mbit/s with this enabled, and 2Gbit/s with this disabled.
Change-Id: Id794e7559c9e9005043361289a3db246a8528dd4
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
(cherry picked from commit 97aa7a0031)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Disabling LSO from the adapter gives us huge performance boosts
on Windows. In our tests 2 VMs within the same hosts had transfer
speeds of 30 Mbit/s with this enabled, and 2Gbit/s with this disabled.
Pick-to: 5.15
Pick-to: 5.12
Change-Id: Id794e7559c9e9005043361289a3db246a8528dd4
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Remove the DisableTests feature to force the qtbase instructions
to build and run the tests.
Task-number: QTBUG-84423
Task-number: QTBUG-83968
Change-Id: Ic904c7b0f3d6d6ab8a546d683b0110b0704bf42c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Switch the configuration to have release + developer-build similar
to the qmake configurations.
Add debug info for extra spiciness.
Specify a new env variable called QT_SYSROOT_FOR_RUNNING_TESTS which
will be used by the qtbase instructions to set QEMU_LD_PREFIX, which
is needed to run the tests via qemu.
Specify the QT_QUICK_BACKEND=software env var as well as the
GST_PLUGIN_SCANNER env var, because the qmake configurations do it.
Make sure to cross-build tools, because some of the tests like
tst_uic and tst_rcc expect the tools to be there.
Note that DisableTests feature is left on purpose, so we can decouple
the building from the testing in 2 different steps.
Task-number: QTBUG-84423
Task-number: QTBUG-83968
Change-Id: Icf6b12e6942c6ae6a0445eeac3f88704ca797148
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
CMake was picking up libtiff and libfreetype from Strawberry Perl
MinGW distribution. By specifying -DFEATURE_system_tiff=OFF and
-DFEATURE_system_freetype=OFF we should fix these problems.
-DFEATURE_system_jpeg=OFF was also added, even though tests are
not failing.
Task-number: QTBUG-84886
Change-Id: I324304bfbf8fcdb2de04ad0481eca1c7534a3cfd
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Fix empty lines in .gitmodules, rather than failing to configure
with an error message that the line is malformed.
Quote all relevant values, to avoid errors that string REGEX does
not have enough arguments in cases when the parsed content is
malformed.
Remove some dead code.
Change-Id: I300a76f82fe174290442c659ca2e84391db361a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove the "Packaging" feature from the qmake configurations in
qt5.yaml and default.yaml.
Note that "Packaging" configurations in other .yaml files are not
touched yet, because there are no CMake ports for those. These are
qdb.yaml, qtwebkit.yaml. qtwebengine.yaml, etc.
Assign the "Packaging" feature to the closest equivalent CMake
configurations we have.
MinGW is not tagged with Packaging for now, because a decision needs
to be made what will the Windows7 32 bit configuration be replaced
with.
At the moment, not every qmake configuration will have an equivalent
CMake configuraiton. As a result WebAssembly goes away as a
Packaging configuration for Qt 6.0.
Task-number: QTBUG-85047
Change-Id: I09b6956b6b9c7393b5e095f826d72e92b81594d0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In Qt 6 things get more complicated because we have Vulkan, Metal and
D3D in addition to OpenGL. Qt Quick will only default to the software
backend when no graphics API was available at build time - and this
not true for the QEMU configs because the Ubuntu env has both OpenGL
and Vulkan headers, so they both are enabled, but are not usable at run
time. To simplify life, just state the Qt Quick backend we want the
tests run with.
Change-Id: I63cd9534bc8cd5d0568235bc2035f5613d29ced4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change the ubuntu developer build to a namespace build.
We need to have namespace build coverage in CMake configurations
like in the qmake ones.
Task-number: QTBUG-84881
Change-Id: I429a11486bd9a0c60a3d0423a9a41dc436f32f1e
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This is needed for consistency.
Previously if you scheduled a test build for a qt5.git change, the
cmake cross compiling configurations would not appear and not be
tested.
But when staging the change, each repo WOULD start building the
cross-compiling configurations, except for the qt5.git top-level
builds.
The current change will make sure that configurations is done both
during scheduled test builds and actual staged builds.
Change-Id: Ia2cbb08cee97414c39287a2ab9ff8d312dcd813a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Liang Qi <liang.qi@qt.io>
After Coin commit 60a6f795f5923c7c206b3fec4ebad991ce30d633 it is
possible to include other intermediate configuration files.
Create a new cmake_platforms.yaml file which will contain the default
list of platform configurations to be tested in all cmake-enabled
repos and qt5.git.
Task-number: QTBUG-85044
Change-Id: I10e4dff8793a1ffb5776e00dac80f43394d18578
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For releasing purposes, we should align the configure arguments
(actually CMake arguments) of the Packaging configurations with the
ones we used for Qt 5.15.x releases.
In particular for linux builds this means disabling the use of a few
system libraries (a new one that needs to be disabled is
double-conversion, it was not provisioned for Qt 5.15.x builds, but
was installed for dev builds).
Apply the changes across all repos, to be consistent and build the
same for qt5.git and per-repo builds.
Task-number: QTBUG-85047
Change-Id: I784abc6367bcda574691758942f89257e891647e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When building a RelWithDebInfo configuration, the debug symbols for
the libraries are embedded into the .dlls. This causes the file size
to be really big (around 400MB for libQt6Gui.dll). On a 32-bit system,
the Windows loader failed to map such big libraries into memory,
and thus certain tests failed with exit code 0xc0000017
which means STATUS_NO_MEMORY.
The solution is to enable the separate debug info feature, to split
the debug files into separate files, just making they dlls nice and
small.
This should fix quite a few of the failing MinGW 32-bit tests for
qtdeclarative, qtquickcontrols2, etc.
Task-number: QTBUG-84886
Change-Id: I10ae0acca5d7d5523d3ae2f0c49587ace239f301
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
All the qmake MSVC Windows configurations are debug_and_release ones,
so the equivalent CMake configurations should be the same for all
repositories.
Task-number: QTBUG-80900
Task-number: QTBUG-84883
Change-Id: I083d7a355558666a5f66efdffb592f5e93705547
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Everyone forgot to enable it after finishing the port.
We should enable it, so it's tested for per-repo integrations as well.
Task-number: QTBUG-78171
Change-Id: I8e024809b4ece5d0775817e072968b7162d7a38c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Just to be consistent with the rest of the files.
Amends 803eb987ad
Task-number: QTBUG-80899
Change-Id: I26212c5367da7b8bf14e4a7d46b96ffb82bf9aab
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Add simple instructions to only configure and not build top-level
builds, similar to what the qmake configurations do.
The CMake configurations need to be copy-pasted again into qt5.yaml.
We can't use default.yaml because that would enable CMake
configurations for repositories that are not ported to CMake, and
thus break the integrations.
Update qtqa sha1 to a dev branch one which contains the
module_config.yaml instructions to build qtqa with CMake.
Task-number: QTBUG-84874
Task-number: QTBUG-84918
Change-Id: I8c64f5e0acc96e14a4952abb6c77fe5c8e27a0ec
Reviewed-by: Liang Qi <liang.qi@qt.io>
Coin now has CMake 3.17, so iOS multi-arch builds should
successfully build.
Switch the iOS CMake configurations to simulator_and_device ones.
Task-number: QTBUG-80899
Change-Id: I9c8bde9f1a3c483ea296f3d9d06f089cbfdf2416
Reviewed-by: Liang Qi <liang.qi@qt.io>
Sometimes some process is locking the mounted folder (/tmp) so that
it can't be unmounted untill the process has been ended.
Let's create squish folder under tmp and use that for mounting
instead
Task-number: QTQAINFRA-3709
Change-Id: I49ab8fd90af37a670e45764a176b62d7a732cc6c
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
(cherry picked from commit c671c2352e)
Reviewed-by: Johanna Äijälä <johanna.aijala@qt.io>
We can re-add them later when issue got fixed.
Task-number: QTBUG-84924
Task-number: QTBUG-84925
Change-Id: I2545e5fe03fd44a6016305723b57db8c0d6e9470
Reviewed-by: Liang Qi <liang.qi@qt.io>
There's a new dev branch for qtqa, so we can re-enable CMake builds
of qtqa using that branch, without breaking builds of other branches.
This reverts commit 33e8275ee5.
Task-number: QTBUG-84233
Change-Id: I1e4ca39717768303eca8435d175aa562fcd6f0f5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Node.js is needed by QtWebengine
Task-number: QTQAINFRA-3729
Change-Id: I23ece8567c569d8376eff52b7845589c60d069b8
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from commit 122cf4cc0e)
Sometimes some process is locking the mounted folder (/tmp) so that
it can't be unmounted untill the process has been ended.
Let's create squish folder under tmp and use that for mounting
instead
Task-number: QTQAINFRA-3709
Change-Id: I49ab8fd90af37a670e45764a176b62d7a732cc6c
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
(cherry picked from commit c671c2352e)
Reviewed-by: Antti Kokko <antti.kokko@qt.io>
Node.js is needed by QtWebengine
Pick-to: 5.15
Task-number: QTQAINFRA-3729
Change-Id: I23ece8567c569d8376eff52b7845589c60d069b8
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Currently we have wrong resolution (1024x768) for 64-bit Windows.
Correct one is 1280x800
Change-Id: Ifc17933a5901681a917f973cab4d7c1ca1dfbd9f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
(cherry picked from commit fa58a227cd)
Reviewed-by: Toni Saario <toni.saario@qt.io>
Squish installation is flaky so the installation phase has been
moved from provisioning to Jenkins. Jenkins job will install the
squish to target VM and copy it to local cache. This change only
fetch the installed squish packages from local cache and
uncompress those to VMs.
Task-number: QTQAINFRA-3510
Task-number: QTQAINFRA-3107
Change-Id: I862da3250120dc6a43d9c04d973a25a691ca66a1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
(cherry picked from commit b0286d6cd6)
Reviewed-by: Toni Saario <toni.saario@qt.io>
Squish installation is flaky so the installation phase has been
moved from provisioning to Jenkins. Jenkins job will install the
squish to target VM and copy it to local cache. This change only
fetch the installed squish packages from local cache and
uncompress those to VMs.
Task-number: QTQAINFRA-3510
Task-number: QTQAINFRA-3107
Change-Id: I862da3250120dc6a43d9c04d973a25a691ca66a1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
(cherry picked from commit b0286d6cd6)
Reviewed-by: Toni Saario <toni.saario@qt.io>
Mostly duplicate anyway, and not currently possible to install node.js
on.
Change-Id: I23a81ddb45b0597f31b1402e362f83957b5be8ae
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Revert the change because the qtqa instructions have been
temporarily removed to unblock other branches.
This reverts commit a10584e57c.
Change-Id: I76646026b099d3b039eec6cdaecfbbce6df43aa2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is only a cosmetic fix. That value is not used anywhere anymore.
Task-number: QTQAINFRA-3757
Change-Id: Iabba6202e7ddbb08e58901a591ba0171e8dd1fc9
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Only includes one MinGW configuration, to mirror what Coin does
with the qmake builds of qtqa.
Switching the Coin instructions to do license checking and binary
compatibility testing using CMake will require a different change.
Most likely this change will have to wait until all of qt5.git/dev
is moved to use yaml instructions for building, rather than the
hardcoded instructions provided by Coin.
Besides, the binary compatibility test still depends on finding
qmake to run its test, which might have to be changed in the future.
Task-number: QTBUG-84233
Change-Id: I5ab7120e965f7729968697abf9e0db602c216cd9
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This should fix the ninja deps issue we had on Windows with the
Ninja Multi-Config generator, where calling ninja a second time to
rebuild the project failed.
More details at https://gitlab.kitware.com/cmake/cmake/-/issues/20723
Change-Id: I0029e57fbc704120d2241499a87cad0ad40c2e50
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
And configure with two configurations, RelWithDebInfo and Debug.
This is equivalent to qmake's
--debug-and-release --force-debug-info
This should give us minimal coverage for debug-and-release builds,
as well as avoid regressions with NMC aka multiple configurations.
If the qtbase builds successfully, we can try to extend the rest of
the repositories to also build with NMC on Windows.
We can't add such a configuration to macOS for now, because it
requires CMake 3.18, which is not released yet.
Disable PCH because it seems to fail the build when used together
with Ninja Multi-Config.
Task-number: QTBUG-80900
Change-Id: I71a9584ddb1d48ed22925f67b50891e102036c97
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The Material style uses its own shader effects, and
recent patches did the same for the Imagine style.
There were some auto tests that have been made to only
run if qtgraphicaleffects is available.
Change-Id: Ifcfcad9591d2a0a8d5ebed505566cd0103dd9176
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Currently we have wrong resolution (1024x768) for 64-bit Windows.
Correct one is 1280x800
Change-Id: Ifc17933a5901681a917f973cab4d7c1ca1dfbd9f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This is in preparation to turning this off by default in configure,
as it increases build times significantly.
Change-Id: I2d601595ce8c093765194f36ec5235f79dd4dd7d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The qtnetworkauth test was fixed, so we can re-enable the module.
Bump the sha1 to the latest version of qtnetworkauth.
This reverts commit a8d3591327.
Task-number: QTBUG-84071
Change-Id: I68c953fa97cf0f28a391b496fb321aefe9d8e7d6
Reviewed-by: Liang Qi <liang.qi@qt.io>
This reverts commit 48ff0140de.
Reason for revert: QtBase WinRT test qcoreapplication needs mpssvc service to be enabled
Change-Id: I523b668d9d7292aaaf7462585dc03819a3973010
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The 419f42903154489e2dace8d1eba183036275448b commit in qtbase
introduced a regression where the tst_fusion test in qtqtuickcontrols2
hits a deadlock while trying to print a warning about a non-UTF-8
locale.
The warning is due to the fact that the agent executed in Coin's VM
does not have an explicit locale set, and thus it defaults to "C".
There is no explicit locale set in any .bashrc (or similar files),
and neither in any launchd configuration (because the agent is
executed at macOS startup via launchd).
The deadlock is due to trying to acquire the same lock twice while
trying to write output to stdout.
The test only deadlocks on CMake configurations, and not qmake
configurations, because Coin has a hardcoded instruction to set the
locale to UTF-8 when running qmake tests.
Until the deadlock situation is addressed in another change, the issue
can be fixed by setting the macOS configuration locale to UTF-8
explicitly, by assigning the LANG environment variable
into ~/.bashrc at provisioning time, like we do with other environment
variables like PATH.
Fixes: COIN-578
Change-Id: Ib6a5849a6868c1776dd425aeb8b5e7d6faa8cde0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Service is still running. It need to be disabled.
Change-Id: I4742f97c93d118a1a98b4107f1597d332c3f1391
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Also include debug info. This is the equivalent of qmake's
--release --framework --force-debug-info --separate-debug-info
Change-Id: I2778b4998890146c82552f9c721a48174a764839
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
It should be a developer build, but due to some features
that are not ported in src/gui/configure.cmake (directwrite)
there are compilation errors due to unused arguments in
static bool QWindowsFontDatabaseBase::init(QSharedPointer)
in platformsupport/fontdatabases/windows/qwindowsfontdatabasebase.cpp
So it's not a developer build for now.
Task-number: QTBUG-75578
Change-Id: Ieb6daca45473ea42748a39f3e9e33a9db087a0e0
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
This adds the basic armv7 configuration and passes through two
additional variables for use in the build instructions:
* QT_YOCTO_ENVSETUP points to the environment-setup script that the
Yocto SDK expects to be sourced before building against the target
sysroot.
* QT_CMAKE_DIR points to the directory that contains our cmake
installation. Since the environment-setup prepends the Yocto host
bin dir to the PATH, we'd end up picking the wrong cmake.
Also the choice of system Harfbuzz is disabled as Qt does not build
against the version shipping in Yocto.
Change-Id: I8d657e773143c4db0e2437d029d62372f7b7e638
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We can't build the wasm version of qtbase any longer
Change-Id: I7436640941702ba2479c7e73f3d1d9ccaf2e7709
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Modern conan will retry downloads on its own. Change default number of
attempts to 5 for more reliability.
Change-Id: Iafd4845b31c3e5fb296ba0b897cbf2030c412b04
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Modified qdb.yaml and created and pkgconfig and libusb relates .sh
files so that QDB can be build for Mac OS due to USB Ethernet CDCECM enabling.
Task-number: QTBUG-82531
Change-Id: Ia5f970e5940b7d9116831c8174db0ea1b9231234
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
Notifications and warnings in UI might affect RTA and autotests results
Change-Id: I447dab3ba839d2c577f633cbf96fc7f3e5fdfe25
Reviewed-by: Johanna Äijälä <johanna.aijala@qt.io>
Needed for enabling all the various OpenSSL classes in Qt.
Change-Id: Ic20ab464552317a2753ae0e35043e16cc6c60ab3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
These are also updated to tier1 image:
msvc 2017: Not installed
msvc 2019: version 16.4.4
msvc 2019 build tools: version 16.4.4
Task-number: QTQAINFRA-3623
Task-number: QTQAINFRA-3417
Change-Id: I006204ca090c4e2cf0d2ffc2309ab6b94f9b7d47
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
(cherry picked from commit 10e843566e)
The upstream URLs have changed:
- emscripten packages now at github.com/emscripten-core/emscripten/archive/
- binaries (llvm/binaryen/node) now at storage.googleapis.com/webassembly/emscripten-releases-builds/
Add support for unpacking tbz2 files. Keep caching as
before, update .emscripten config file with new paths.
Task-number: QTQAINFRA-3577
Change-Id: I239aaf89bc199e5f6267519861f9b2ab54f10b0f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It doesn't even compile against c++17 anymore (uses auto_ptr),
and the JavaScript engine is now more than 10 years outdated.
Change-Id: I56cc36aa5aeb4dfa6b19b699886f6e34fe1eecbd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Having notifications enabled will eat VM resources (CPU).
Change-Id: I2af7fbc7afeb9436164915353998abf219d495ed
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Commit 89fceff6a4 added -qt-zlib to all Windows configure lines.
This also affected QNX. Instead, only pass -qt-zlib to native builds.
Fixes: QTBUG-82254
Change-Id: I116cae82ab971170e633b5a8602dd573407be96f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is needed to include various fixes to allow building the CMake port
against the contained sysroots.
Change-Id: I42fc055a0e1e2abe5567b9ac3e1bc5e20fcd9900
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch mimics the behavior of qt.pro, where the module list is
extracted from the .gitmodules file and then topologically sorted
based on the modules dependencies.
This patch also introduces a small check to make sure all the required
dependencies are met and will be built.
Change-Id: Idd3df9b618805ca0b2347eac57aaa39c1bcdb3dd
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
(cherry picked from commit b01225fb32)
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Also import and use ECMOptionalAddSubdirectory.cmake to add other
module's as subdirectories, in case the directories exist. Additionally
this module allows to disable the build of submodules by passing e.g.
BUILD_qtsvg=OFF.
This probably needs more though on how to hande the intermodule dependencies,
but it's a start.
Task-number: QTBUG-75582
Change-Id: Ic3de9711d9b865b2d96bdaee0089f570408b9693
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
(cherry picked from commit 7509458d5f)
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The upstream URLs have changed:
- emscripten packages now at github.com/emscripten-core/emscripten/archive/
- binaries (llvm/binaryen/node) now at storage.googleapis.com/webassembly/emscripten-releases-builds/
Add support for unpacking tbz2 files. Keep caching as
before, update .emscripten config file with new paths.
Task-number: QTQAINFRA-3577
Change-Id: I53e72f19d3eefa0e2155493db4f93c8730c60334
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
We want to test debug_and_release builds with CMake as soon
as possible.
Change-Id: I7d4c0a4e33adc26129844ff34ea8df6b149e184f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Apparently standalone Debug iOS builds are not supported in qmake
at the moment as per QTBUG-71990.
While we keep the same configure.json error reports for both qmake and CMake
it's simpler to switch the config to Release.
Once we get Ninja Multi-Config in Coin working, we can switch to
debug_and_release.
Change-Id: I406012918fd402ad0ff29bbdc151e247699eea72
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Now that qtbase supports building bundled 3rd party libraries, we
should have no need for vcpkg in Coin anymore.
Change-Id: I7aa7b0323416b60ffb0cd70eec287e5f25963d9a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It is used for compression of QtWebKit debug info, saving
about 1Gb (~40%) for non-compressed debug file of
libQt5WebKit.so, and ~50% of 7z-compressed debug package.
Version 0.12 provided in RedHat devtoolset exposes a bug
when applied to QtWebKit debug info:
https://sourceware.org/bugzilla/show_bug.cgi?id=24251
Change-Id: I0395aadfb7babbbc150f367f8b5dd296dc6d2064
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
* Add 64-bit MinGW config
* Don't use DisableTests for 64-bit MinGW, as it's necessary for at
least for the purpose of JS engine smoke check
* Sync configure flags with qt5.yaml, but not enable forced debug info
which causes build issues for both 32-bit and 64-bit configs
Change-Id: Iad5ff1459f8b39f17223da75b3319ab0cfc033d8
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Change will enable tests for MSVC 2019 and replace MSVC2017 as packaging
target.
Task-number: QTQAINFRA-2875
Task-number: QTQAINFRA-3432
Change-Id: Ifef3bd02b5fae6225a6c0ecdc412edbb488e25b1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
GCC bug which breaks Webengine build should be fixed in GCC 9.2
Task-number: QTQAINFRA-3534
Change-Id: Ie0df7c67e0e96cca5632bcd0e6a3db822fcbffbe
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Data:dumper is critical for release script build.pl. Currently data:dumper
is installed by devtoolset as a dependency for autoconf. But, it seems,
that in earlier version of devtoolset the autoconf wasn't installed by
devtoolset which caused the failure with build.pl.
Change-Id: I487a17ca0eb37c5984eb2f195e1024ed019b80d2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
We update to the latest 3.7.x maintenance release for security/stability.
Change-Id: Ic2c251ab8e0db2c5e622f685e54e5cdd715723fc
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
+ Use DownloadURL to download from local cache
+ Verify download SHA
+ Silence the tarball extraction
+ Install some generic packages in 02-zypper.sh
+ Use some other generic facilities from common.sourced.sh
+ Other minor changes
Task-number: QTQAINFRA-3528
Change-Id: Ic085d43381e220a0a4a52ef6d5bb0cf8a9bf7032
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
For a short time after boot, macos sometimes mounts a filesystem of type
"msdos" at the unique path /Volumes/firmwaresyncd.XXXXXX.
Telegraf [inputs.disk] plug-in stores records to InfluxDB, with the unique
mount path under "path" tag. The uniqueness of the path blows up the
cardinality of the database.
So exclude "msdos" filesystems from being monitored by telegraf. Additionally
exclude "cd9660" filesystems that appear always as 100% full.
Change-Id: I4cdd3fca57b3db6157df168cc8a5314e64528b2d
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The exact same method is already in use on all Linux provisions,
it was just copied to macos.
Change-Id: I873f6efd99b147c5364e0dda6c26c7dad7dee480
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
sdkmanager is already silenced on the other OSes, as it prints thousands
of lines of progress bars in the logfiles.
Change-Id: I4a2aa422a83cfe5fc6a3a7ba7be69e1e9c01acc0
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Fixes a flaky conflict between zypper and packagekitd.
packagekit is a *static* unit, that means it is missing an [Install] section,
so it can't be enabled or disabled. It is started as a dependency by other
units, or by dbus activation.
We *mask* the unit to make it impossible to start in any way.
For that we had replace a few occurrences of "pkcon" with the native package
manager.
Finally the package "libpython3_4m1_0" is not being installed any longer
because it never was: this package does not exist. It's just that pkcon does
not fail on invalid package names.
Fixes: QTQAINFRA-3523
Change-Id: I6ff580afb05aa508042c444b2ce777c3a9443dfe
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The important bits of the script were copied and modified.
NOTE that we no longer build openssl from source, the distro (SLES15) provides
a version that works well.
Task-number: QTQAINFRA-3528
Change-Id: Iad63d75055a7efc3e104789e4a515b8511cf0880
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Save some seconds or even minutes during provisioning, by avoiding copying
many files across filesystems, from /tmp to /usr/local. We now install
directly to /usr/local.
Change-Id: I3a8f545f1400995095193c4eb337f9dd8534ef72
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Sometimes we pre-create the target filename using mktemp. In that case of
course the hash will not match, so avoid comparing.
Change-Id: Id0feb0178d659e03f5ceb000f738167cdc28a3ec
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
It happened that old bash version on macOS the alias was not being expanded
for non-interactive shells running under "bash" but was being expanded fine
when under "sh". Using functions is the recommended way.
Here we define a function conditionally.
Change-Id: I607b265cb9e88b2b529ed170121e5a0833003acd
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Also first try to download it from local mirror.
This install script appears to be doing a lot of git-cloning and downloading
itself though, so it is still far from the ideal solution: to only download
from locally cached endpoints.
Task-number: QTQAINFRA-3134
Change-Id: I32131045d6e62f302ec666b4ac055ca5ee9662d5
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
This makes sure we don't run into CVE-2019-10906 when using
jinja2 in QtIvis Autogenerator.
Change-Id: If51bf54bd26858c6b5faa3dd6a6627f2979b862d
Reviewed-by: Robert Griebl <robert.griebl@qt.io>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Disable a no-gui build on Ubuntu 18.04 for 5.15.
Conflicts:
coin/platform_configs/default.yaml
Task-number: QTQAINFRA-3406
Change-Id: Ida5271d29b89375c045de0c4e6dc20840a0bc748
It will be reinstated later once confirmed that all the necessary
bits are there.
Change-Id: I04ca0dda3f9feece8acc9039c8372d346b4f3cd4
Reviewed-by: Liang Qi <liang.qi@qt.io>
From Qt 5.15 ->
- QtQuick3D will be officially supported
- QtLottie will be officially supported
- QtQuickTimeline will be officially supported
Task-number: QTBUG-81818
Task-number: QTBUG-81834
Task-number: QTBUG-81922
Change-Id: I5e6efd5ccaf0bb25c83c9b88cc6cc2f8146993e2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adjust the SDK root path to match what's on the system. This should
ideally not be hardcoded here but detected, but for now fixing the build
is highest priority.
Change-Id: I317fe9a4e038cb62cf6cdf06f10a60aa9d975e15
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add missing dependencies that were there on 10.13.
Change-Id: I1d81e9f50a83486784bef02bf904e3e8c53c4f11
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is a workaround for Coin issues where it combines both
Legacy instruction platforms from default.yaml and module_config.yaml
platforms from meta-boot2qt.yaml.
Task-number: COIN-508
Change-Id: I970400cd7d326788ec274c38789d61b4a524989b
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
We've switched the qmake configs as well, so cmake should follow.
Change-Id: Ib0cf4b3ade56714b4437afd5ce301204e5b31d24
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This change enables building a few CMake configurations of qtbase in
Coin.
It should only be merged once qtbase wip/cmake -> dev change is
merged.
Change-Id: I7542af91c7f0004219d0155cad485582883e8e95
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
meta-boot2qt is already using module_config.yaml to define
the CI instructions.
Change-Id: I67e4f8005dce55aea0143236c4aad0bbedaa8def
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Upstream changes of binutils or elfutils broke the build. Error was:
/usr/lib64/gcc/x86_64-suse-linux/7/../../../../x86_64-suse-linux/bin/ld: /usr/lib64/libc_nonshared.a(elf-init.oS): unable to initialize decompress status for section .debug_info
/usr/lib64/gcc/x86_64-suse-linux/7/../../../../x86_64-suse-linux/bin/ld: /usr/lib64/libc_nonshared.a: error adding symbols: file format not recognized
collect2: error: ld returned 1 exit status
Task-number: QTQAINFRA-3527.
Change-Id: I50b677598b4415a281abbf0ddb2db39613646b36
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
We want to run all tests on macOS 10.14, which requires some more fixes
in qtquickcontrols2. That however isn't passing due to unrelated changes
in base/declarative blocking us from moving forward. So to decouple the
two, this change limits macOS tests to qtbase and declarative but on
10.14. This will allow us to switch qtbase over to C++17 and once we've
got qqc2 updated in qt5.git, we can globally re-enable tests for 10.14.
Task-number: QTQAINFRA-3108
Change-Id: I0f835a1da87187c6bb69e3d4019196e1411095fd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Update QtWebengine for Qt 5.15 Alpha: We need to have
4455081eabc8610112d1cce56a6f6fc64c0be236 in alpha
Task-number: QTBUG-81128
Change-Id: I0030bb44bbb24813e6bb57d8c4b05c83defb6d57
Reviewed-by: Akseli Salovaara <akseli.salovaara@qt.io>
This change is preparation for merging qtbase wip/cmake -> dev,
because that will bring in the new yaml instructions on how
to build the CMake configurations, which means that legacy
instructions provided by Coin itself need to be used for all
the existing qmake configurations.
Change-Id: I7005835719b83b7186138292a2e1baf4d2a4a3e0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
PostreSQL 9.6 version creates emtpy unistd.h file which will cause
failure in Qt Safe Renderer' MinGW build. By removing it the system
should use the one from the MinGW environment.
Task-number: COIN-488
Change-Id: I76d3f34dd9726dc4f0aac06c410f306dffc8f365
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
We're not really interested in catching the C++ warnings at this late
stage (Qt5 build), especially not for building documentation.
Change-Id: I48c621ce6de199de61fab8de6517f4c0b099bf11
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The compiler fails to pass the c++14 configure test.
Change-Id: I2253d1654eda19351154467cd3b076ba726c10d7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is needed to use the bundled zlib in windows builds. In Qt 5.14.0
windows packages were using bundled one but in Qt 5.14.1 not anymore. So
this change is to restore same behavior than in Qt 5.14.0.
Linux and macOS packages seems to use system zlib also in 5.14.0; that's
why no changes needed there
Task-number: QTBUG-81724
Change-Id: Ife531d96c8438491e5d7b1f97f5338c4627be7e8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Qt Quick Controls 2 styles use webp, which in turn is instantiated by
tests.
Change-Id: I7a9a98f96beecb1f214e9e2caef0062a5716d31e
Reviewed-by: Liang Qi <liang.qi@qt.io>
Change the amount of modules that are tested together by the CI (and
then used for initial Qt 6 snapshots) to the core essential modules. All
others are set to "ignore" and the objective is to bring them back later
when qtbase/declarative/quick3d development has settled.
Notable exceptions are svg and graphicaleffects due to their strong
dependency from qtvirtualkeyboard as well as qtquickcontrols2.
Change-Id: I972d7b353add1f5dbad5104ce84c4cc5b8c6f616
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
PostreSQL 9.6 version creates emtpy unistd.h file which will cause
failure in Qt Safe Renderer' MinGW build. By removing it the system
should use the one from the MinGW environment.
Task-number: COIN-488
Change-Id: Id7f2f5024998cc5fbeb61e144bcd87f6e09b2bb1
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
ICC 18 doesn't support C++17, so let's remove it.
Change-Id: If87010fe73111324f78ccd26f25e55ec7e6afbca
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
macOS 10.13 doesn't support C++17, and will get removed soon.
Change-Id: I5ed50df99d8582349adfd04e59ce89dd49701f76
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Those configurations don't support a C++17 compliant compiler.
Fixes: QTBUG-81576
Change-Id: I87499e21e7532856fdd4c41b1e162e3566d5f130
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Also bump qtbase to pull in the latest fixes for 10.14 testing.
Task-number: QTQAINFRA-3108
Change-Id: I7a198c74a4f7e537d95053bfad25a905029aa2db
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For Conan python needs to be built from sources.
Task-number: QTBUG-81014
Change-Id: I8d14d65ce2f1c57a7fa370b93aa61bc156d617ca
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
They were originally removed in commit
5677a43a25 but re-added through a merge.
Change-Id: I821fb955745dfc5e982cdbf2264af3345ec03252
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Removing the default hostname makes system create unique hostname
based on the IP address. This is needed to make NFS operations
reliable.
Task-number: QTQAINFRA-3257
Change-Id: I9e4dc4950f5d1a1b7f85372674f79d1701d1eab6
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Follow the approach for Linux (see 269387), and do set the -s ln flag to
make sure the linker does not include debug information in host tools.
From ld documentation:
-s: Omit all symbol information from the output file.
Fixes: QTBUG-81301
Change-Id: I21f828adec4a93855331d8b833cfa708b73baafd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Apparently libpq version 9.1.9 is no longer supported.
Let's use version 9.6 to keep maximum compatibility and align
the version with MacOS.
Task-number: QTBUG-79555
Change-Id: Iea98a1eb821f103e3a610ed602746407bfe5ea97
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Depending on different external URLs makes our provisioning scripts flaky,
because they can fail if any one of the external servers goes down.
In this patch
* the docker images qt_ubuntu_16.04 and qt_ubuntu_18.04 are being built first,
they apt-get from the internal ubuntu mirror
* all the existing docker images have been rebased to these two images, so
they inherit this behavior
* images that fetch files from the internet have been modified to not do the
fetching themselves; insted URLs are fetched in advance using "DownloadURL"
which accepts internal mirrored URLs, and the downloaded files are ADDed to
the images with a local copy
* previously existing git clone commands have been modified to fetch
internally mirrored tarballs
Task-number: QTQAINFRA-3343
Change-Id: Ic4640a4f7776e38623edba90f0eba7cb68631223
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
That happened because docker-ce* was installing both docker-ce and
docker-ce-cli, so apt was printing a warning.
Change-Id: I0cad82243c8c3d5c0b9f26fc7b24673268259aa4
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
QEMU cloning and building with each provisioning takes
time, thus installing it from a prebuilt installable package
can save lots of time in provisioning.
Task-number: QTQAINFRA-3396
Change-Id: I3e9b0fedeecb6ddbae3997742827552ce9419399
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Add indentation for preprocessor directives if/ifdef/endif
as this is commonly used across Qt.
Change-Id: I0ce9851cc0861b8d18cb3717d695c871169db239
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This merges merely the provisioning changes needed to perform cmake
builds in the CI. The platform configuration changes will be applied
incremental as we merge support in the individual modules.
Conflicts:
coin/provisioning/qtci-linux-Ubuntu-18.04-x86_64/02-apt.sh
Added ninja to
coin/provisioning/qtci-linux-SLES-15-x86_64/02-zypperpackages.sh
just to force re-provisioning.
Removed module_config.yaml because that breaks license check in
qmake builds.
Change-Id: Ic074c0c881404f4361e61f66130c0cb07f5e8b84
The snapshot uses the previous snapshot as a based. It was rebased
on latest master as of 2019-12-05, and also contains cherry-picked
patches to target iOS.
Change-Id: I9fc0c39856fdb255533f6c71d27f5749894b6bea
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Change will upgrade Visual studios to the latest ones. Also MSVC 2019
build tools are installed for RTA.
MSVC 2019 version 16.3.10
MSVC 2017 version 15.9.17
MSVC 2019 build tools version 16.3.10
Task-number: QTQAINFRA-3389
Change-Id: Ic21645f96f8d4e6abc38951bd6bab519b4864418
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
There seems to be own copy of QT LICENSE AGREEMENT in qt5 root as well.
That's why we need to update it to currently used version (4.2). At same
time let's remove version from file name to make update easier in the
future
Task-number: QTBUG-80485
Change-Id: I286390a0754dcba79927f4d74abaf06d761bedc1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We will use this tag in qtbase to refer to the image to run, because
with the current sha1tree() tag, every minor change in the docker images
requires synchronized changes between repositories.
Task-number: QTBUG-79867
Change-Id: If94eb6dd8b97526b589e58064837bc6554fed79c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Poppler test requires this package
Task-number: QTQAINFRA-3253
Change-Id: Ifc0904ca020a8606b06a4032d5145fbf2f8063f1
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Also update the Windows config to use MSVC2019 instead of 2017
to circumvent the issue that vcpkg is building libraries with the
latest compiler it finds (MSVC 2019), but Qt is building with 2017.
Conflicts:
coin/platform_configs/default.yaml
coin/platform_configs/qt5.yaml
coin/platform_configs/qtsaferenderer.yaml
Change-Id: I88deb114e171046b50fc617ab6bc18b707d61486
There is no need to install as sudo for qt user. Using sudo will
change the cache dir's permissions preventing us from
installing anything with pip as normal user.
Change-Id: Id45bf3805ce4d772a6c82e429d4e1948289f076e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Update with custom build of Squish to be able to launch Qt5.14
applications in RTA tests.
Change-Id: Ic420656852ae885b057de937baabf01135526764
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Same flag is used in windows and linux ones and it seems that is needed
to enable dSYM files for release builds
Task-number: QTBUG-3934
Change-Id: I3f60ea68ba0f4d755e411215efa4cec1d0a46d83
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also updated the docker-compose binary to the latest one.
Task-number: QTQAINFRA-3279
Change-Id: Ie09a772ca8247aa5f5bd6d36774b68b6bb846386
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Some patches were upstreamed and this beings the version in line with
what we need for Android. This patch also centralizes the version into a
shared file, for future use.
Change-Id: I90973f9bfcbc1bfeb2d11e2ee7a7fa4e4f6a58a2
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
Update required as there's a bug with setting the CXX_STANDARD on
android. Updating to this version fixes the issue.
Change-Id: I50b0bc2941e0919232b46bbf5b28133149878649
Reviewed-by: Liang Qi <liang.qi@qt.io>
Under coin/pre-provisioning can be found information what have been
provisioned to tier1 image
Visual studios are updated to versions:
MSVC 2019: version 16.3.1
MSVC 2017: version 15.9.16
Task-number: QTQAINFRA-2875
Change-Id: I3a9748296dcf088bb312dec8f78bdc59dfb281d1
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Apple's certification was expired so Xcode 10.2.1 package needs to be
updated from the Apple's download server. Old one causing problems with
RTA tests.
Task-number: QTQAINFRA-3317
Change-Id: I5006f95ab420e26523d2621800d80322a52bb9a2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The old mirror host Qt company used to sync their local mirror
from, stopped syncing from Ubuntu in October 2018.
The mirror mechanism was changed so that in the future if
addresses change, we don't have to touch the provisioning scripts
as the address is more general. Also a duplicate entry was removed.
Task-number: QTQAINFRA-3279
Change-Id: I65ada052d308eaef0411eb9caad893304eb05ab6
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
From 5.14 -> we will have combined android builds for all android
targets. So remove all separate android builds as those are covered by
multi ones.
Task-number: QTQAINFRA-3310
Change-Id: Ia00222cf56e85ed207ad01d5d00a81849196176d
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Apple has signed their packages with certificate which has been
expired 24.11.2019. Packages are unusable without allowUntrusted
parameter
Also Xcode package for macOS10.13 needs to be refetched from
Apple's download to local cache
Task-number: QTQAINFRA-3317
Change-Id: Iebbe81ee0c360e5f0b49d422b38fe1a148424891
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
By provisioning the path to gnuwin32, we can remove the
hard coded paths from Coin.
Task-number: QTBUG-73422
Change-Id: Ice96fcd992e22ed39b66496403b9eaa99a6865a0
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Now that the cmake port landed
Change-Id: I5218a23fffd8de736ffcf5e039d369aec0827f42
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
As per https://gitlab.kitware.com/cmake/cmake/issues/19515, the version
of CMake we're currently using in the CI has an issue detecting clang as
GNU compatible C++ frontend and thus fails to convert the values in the
CMAKE_C/CXX_STANDARD variables to compiler flags correctly. Work around
this for now as suggested in the upstream ticket. We can remove this
when upgrading to a newer cmake version.
Change-Id: I0ea37503c086ff86e05c50b812474522a7737b20
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use extprefix instead of prefix, so that the target deployment
path won't contain host paths. Especially needed to avoid Windows
host paths on target. Prefix will default to /usr/local/Qt-x.x.x
Task-number: COIN-48
Change-Id: Ie888dace694294b72a32913b65a191b4bcb78371
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
The online repo only contains the latest version.
Change-Id: I2dfbc3c2a873ed3758672682b09c0205bfa19549
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Configuring modules in specific files removes their dependency for
coin creating their configurations.
Task-number: COIN-259
Task-number: QTBUG-78942
Change-Id: I8f2a9a5672ca2261c8949baf49f2d0d093bf1c5b
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
QtCreator requires Cmake minimal version to be at least 3.7.0
Task-number: QTQAINFRA-3272
Change-Id: Id7f2d38ad0581c1aead4b5bac860ac193488ae1b
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@qt.io>
This now fixes the hook, so that it can actually be used.
Change-Id: Ib47ae7df580eb21654f634be387d44d2f8ad0148
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Since we stopped the separate debug builds for MinGW in 5.14, we should
include debug symbols for the release libraries as separate files to
give our users something.
Change-Id: Idf8a6748056cd9da03eddc37aebd77b4c190aedf
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This makes git-hooks/clang-format-pre-commit available which is needed
for accc0af6e4 .
Change-Id: I9674b737fb32031552d51129be5541fbd1624c6a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A preparing for having android build later.
* install gcc 7.x
* install git 2.x
* install a few other dependencies
Change-Id: I18f05bdfb78c92b7f05f67609613b5271b400f91
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
This will prevent the output of unwanted information
Change-Id: I5f1824a6bbe98c673ef04dc2daa0db0536d27828
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
During powershell process error is not caught and provisioning
continues even if the exitcode is something else that '0'
Task-number: QTQAINFRA-3214
Change-Id: I91116a78d0c4defe6ba4287913c2394e199be958
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
All libs, expect xcb-xinput have been dropped from 3rd party sources
in qtbase. When building default binaries for releases we used to have
"qt-xcb" switch to reduce dynamic depenendies of the binary. We still
need to do that for xcb-xinput (via -bundled-xcb-xinput) as this library
is not available on some of the supported distributions.
Change-Id: Iece12bc38978ddb66f84928f661924f076c3647e
Reviewed-by: Liang Qi <liang.qi@qt.io>
It used to return error when tested inside a login shell, because $0 is
"-bash" and `basename` was trying to interpret -b as an option.
Change-Id: I5faa2dc01e50c7d5bcfc0ab1fcfd910b2538afc2
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
It seems RHEL 6.6 does not provide /etc/os-release.
Change-Id: I01ba2bb17b89c01f9991944a11eeaa9c2eba6f20
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
WinRT was tested by default and removed in commit
5677a43a25 globally.
Change-Id: I4878266cd25a05b74a4a3427840c3aaef0029032
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Having a few windows specific tools in qt5.git was always strange. We
now provision the utilities to the machines, so remove them from
qt5.git.
[ChangeLog][General] GnuWin32 is no longer part of the Qt source code repositories.
Instead it can be downloaded from the upstream project at https://gnuwin32.sourceforge.net .
For convenience we also make a copy available here:
https://download.qt.io/development_releases/gnuwin32/gnuwin32.zip
The GnuWin32 tools are needed for building Qt from source on Windows.
Binary package downloads are not affected.
Task-number: QTBUG-73424
Change-Id: I9212cc2923343f4f84bcba9d1444a90e446dfb8a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reduce verbosity in order to shorten logs and make them more readable.
In two cases we just remove the verbose flag.
In one other case we undo inlining of a huge script in the command line.
Because we run the provisioning scripts in trace mode, this caused the
script to be logged, and it was rather long and meaningless since it
comes from an external project.
Change-Id: I078ee3b3ab2db9425204375deb5815b6526a4466
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
In that module tests were broken since oauthbin.com is gone.
See 639800ccfe85daecd4432f8b7f64b258e7d2e6dc in qtnetworkauth.
This unblocks qt5.git.
Change-Id: I475a43c5b2ec3ce2021199c37bec4e10d8c1bb0e
Reviewed-by: Liang Qi <liang.qi@qt.io>
Ubuntu Linux in this case.
Change-Id: Ic17b3f4880105e639340ffc07c52de27245612d7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The reason is that Ubuntu does not have curl at the very beginning of
provisioning scripts, and also does not have the repositories configured
in order to install it.
Change-Id: Ia485c1672f894bc800f199b742d238b2945938e5
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
so that we can extract zip files early and install telegraf.
Also moved disabling Windows defender, to keep it at
the very beginning of provisioning.
Change-Id: I6c2039ebd20e541bdd7d437dd56ccb06a1619a5f
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Install binaries as early as possible in the provisioning process, and
start them, in order to monitor provisioning too.
To achieve this, some OS auto-detection logic is introduced in shell
script common.sourced.sh. The script can be sourced and used in all kind
of other generic scripts.
ioping is also installed from custom-compiled binaries in order to
monitor the disk latency of the VMs. Reason we don't use ioping from the
repositories, is that the units differ between ioping versions (new
ioping reports latencies in nanoseconds, old in microseconds).
Fixes: QTQAINFRA-3092
Change-Id: I9d9afb791955725d4bd0b32dae97dfc0bd4a76a3
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Auto-detects and verifies all kinds of hashes, not only SHA1.
Hash verification is now an autonomous function.
If the file is found at the destination, skip redownloading it if the
hash is OK.
Runs on POSIX sh, not requiring bash.
Retain compatibility with previous version.
Change-Id: I9930336030aa776f49dc460fe766f3e831700255
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Provisioning was failing and the logs did not provide any useful
information because of the silenced squish install command. So I went
through all the scripts and I re-enabled stderr logging where I found it
silenced (with the exception of where it was purposeful or harmless).
Change-Id: I5fa0b0ba4362970b214c150d399b6720b1780e1e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
yum install supports a local filename on RHEL 6 or newer.
Change-Id: I873ab3dfab56003ded45bc6c4099aae150f423dd
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
It seems that disabling it is not enough, it has to be fully removed.
It is also removed later in the scripts but it wasn't enough apparently,
so no harm done removing it twice.
Change-Id: If1a4f032240e66100b68bca3196a700cb570701e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Cleans up many thousands of useless lines from the logs.
Change-Id: I2673f65b713996637d2161da4db726823e17c0df
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
which is not in use when ninja got selected.
Change-Id: I1841471dee0f58e4a54cd05f33f4ba7c3a1a8251
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
From 5.14 -> android builds are done by default at one go. Add new builds
for doing that.
Removing old, separate builds will be removed in a follow-up patch to
give time for packaging to adapt that new system
Change-Id: I42f094c7940f3914d7e00feda71cc74f7a26655f
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The module has received its initial port
Change-Id: Ie5814be1f52965cb2393ec331e12751472890abc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CMake Build Bot
Windows have lot's of tasks and services running which are slowing
the performance of build machine. Also 'windows' and 'windows
defender' updates need's to be "permanently" disabled.
Task-number: QTQAINFRA-3182
Change-Id: I8f6b237fcdc6e38fa9a06836d349821d86c58afc
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Maurice ported the module and we can add it to the Qt5 set now.
Change-Id: I146e60f6f18dcf7a00775e532e715e3718644edc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Only qtmultimedia and qtwebengine in this round.
Change-Id: I82a7b1db76aa0074cd42eeaea96e4e0e4539a564
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
.gitmodules
Ignore qtquick3d for now.
coin/platform_configs/default.txt
coin/platform_configs/default.yaml
coin/platform_configs/qtbase.txt
coin/platform_configs/qtbase.yaml
We use yaml files for configurations now.
Adjust the configurations for Qt6 as it was
done before in the .txt files.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: Ica164f8865aed011c550ba7e1e8137e2bf9fdda9
Arm targets from default change places with clang-x86 from qt5
Task-number: QTQAINFRA-3153
Change-Id: I642f5c07fd5c36bf675676d82f5f200bce4beccf
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Because we don't run tests on static build.
Change-Id: I10c7851ecebcfa3691690c6bc26a352fd5799965
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add build flag '-no-opengl' to remove xcb from static build
Add build flag '-no-vulkan' to disable vulkan
Task-number: QSR-517
Change-Id: I7d6f5c507bd96aed024d3cf74029feb12ad77bca
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
... and not qtscript accidentally, like in the previous change.
Change-Id: Ic8cd85ef7b149ffee7bc85ffa3fc9075f8a77c1b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
libiodbc latest version (3.52.13) was automatically installed causing
qt-config-gui to fail build, this installs version 3.52.12.
Task-number: QTQAINFRA-3188
Change-Id: I5b87ff04c2301a5471cc9abfa0849b6073a1bdd4
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Add build flag '-no-xcb' to remove xcb from static build
Task-number: QSR-517
Change-Id: I9b77cd0ada41490233ec2aedb877a37bf2648a1b
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
The build shall be empty for now, but this allow testing module wide
updates.
Change-Id: I47bcdae274edb2ec000bb57480d74614d3b55833
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Hopefully this pulls in the last fixes to make declarative work.
Change-Id: I7c4765be631b917ee51e200977a01a913bc619b2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Currently we are provisioning older Android NDK version than the one
used in macOS 10.13. Let's keep these sync even though we don't currently
make Android builds with macOS 10.14
Change-Id: I6c284d50bac395eb474c0f7e34cd90eda3f180c3
Reviewed-by: Johanna Äijälä <johanna.aijala@qt.io>
Add build flag '-qpa offscreen' to remove dependency to xcb libraries
Task-number: QSR-510
Change-Id: Icc87face742abe775147d9bf931dbbdaee81fab1
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
Add build flag '-no-icu' to remove dependency to icu libraries
Task-number: QSR-499
Change-Id: I788de8dfdeb9845e9135e83a424468d2f5ca20d2
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
Conflicts:
coin/platform_configs/default.yaml
coin/provisioning/common/linux/disable-ntp_linux.sh
coin/provisioning/qtci-linux-SLES-12-x86_64/55-emsdk.sh
coin/provisioning/qtci-linux-SLES-15-x86_64/55-emsdk.sh
emsdk.sh was moved from linux to unix, see
38e416be66
Change-Id: I5b06dde2860a4e4869960ae2a5be1d6a1396e957
... as we are removing -qt-xcb switch from qtbase as part of
stopping to bundle xcb sources.
Change-Id: I33d58b78a1d7f53d5941ebda7131bf35a71cc8e6
Reviewed-by: Simo Fält <simo.falt@qt.io>
DisableTests on qtci-windows-10-x86_64-10
Add flag '-qt-libpng' to qtci-linux-RHEL-7.4-x86_64
Task-number: QSR-432
Change-Id: I3efc7f84f6c2eed49602e491f20f5a4f47512524
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
Adds QtQuick3D as a preview module in dev
Task-number: QTBUG-77724
Change-Id: I53d45bf5e823e3dac1acab9390121cbd1ad6352a
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This configuration verifies big endian builds.
The build was accidentally removed in merge
a94696ccd5.
See also 9b84c7135b.
Task-number: QTQAINFRA-2492
Change-Id: I2616f918591758b4cfee244a0a5414a61322f7d3
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
Compile QEMU with "Unsupported syscall" and "Unsupported ioctl" messages
suppressed, those can be shown by set/unset environment variable QEMU_SYSCALL_DEBUG.
Task-number: QTQAINFRA-2808
Change-Id: If0b28c47f2599c4ebca9cae6a6d38f9a4fd00458
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
new apple id is required with notarization
Task-number: QTBUG-77359
Change-Id: I2aafda37d40608296d598b1d9ade83a025bcac8d
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
Bump qtwebengine sha1 and re-enable qtwebengine and qtwebview to
be built.
Change-Id: I5f9f57b1083629e4294b4a34b74780a862d9e873
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It seems those build targets were accidentally deleted when
yaml change was merged in. Targets were there in Qt 5.13.0 release
(before yaml change)
This amends a94696ccd5.
See also ebcfcbe69a.
Task-number: QTBUG-47672
Change-Id: If2c22a8b995fdaa967f81062d0fae6dc725829dd
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Point qt3d, qtdeclarative, qtgraphicaleffects, qtimageformats,
qtnetworkauth, qtquickcontrols2, qtsvg to latest wip/qt6.
Also re-enable the qt3d build.
Change-Id: If9d122e064021b500a423376b991edbb5c1903fc
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These packages are required for building b2qt module.
Needed also on 5.12 branch as meta-qt5 follows Qt branching
and will take provisionings from here.
Change-Id: Ia6c5ffd95d4f778b23f381a6f1f5473aa11971e3
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
(cherry picked from commit ee9dd0d860)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Point qtbase to latest wip/qt6.
Temporarily disable building qt3d because it fails with the new qtbase
version, but updating it with old SHA1 of qtbase is also not possible.
Change-Id: I232920be48f01608f196c24370c684eccbd3994f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Point qtbase to wip/qt6.
And use new sha1s for other repositories when needed.
And update .gitmodules branch to point to wip/qt6.
Change-Id: Ic12a106d1b491f77277419a27b61396ba07f1737
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
After adding "-force-debug-info" and "-separate-debug-info" debug information
is going in the binaries accidentally & so on exploding binary size.
Debug symbols are wanted for libraries and adding QMAKE_LFLAGS_APP+=-s as
configure argument will prevent debug information not to go inside binaries.
Task-number: QTBUG-69767
Change-Id: Ieec205402b34870901aeb26d9ca98fa9edb159c6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add empty linux targets that are used by the yaml file from
meta-boot2qt and meta-qt5
Fixes: COIN-320
Change-Id: I574185345a3c3dec0a033e7faed45091b89d4959
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
qtbase pointing to dev branch, and other repos pointing to
wip/qt6.
qtwebengine and qtwebview are not built at the moment. The build of
the mentioned repos will be restored after bumping qtbase version
to 6.0.0, and after the subsequent qt/qt5 wip/qt6 integration is
merged.
Change-Id: I9b6b8136b2f58b181ae2d2dadb8a96b9c1103225
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The requirement to separate debug and release DLLs on Windows stems from
the Visual Studio C run-time library appearing in two different variants
(debug and release) and not mixing well. It's possible to perform builds
without optimzations and with debug symbols while linking against the
release version of the C run-time, but at the same time the debug
version of the run-time brings other developer visible advantages.
MinGW on the other hand does not have this distinction, does not ship
with separate DLLS and does also not require the VS C runtime library.
Therefore we do not need this separation for MinGW, which means that our
packages can be reduced in size and application developers wishing to
debug their applications do not have to use debug builds of the Qt
libraries or run into Qt internal debug code.
This change is in preparation for turning off debug-and-release in qtbase.
Since coin overrides the Qt defaults, this change needs to be applied first.
Change-Id: I2ed6e2c0ae54cf23f78119d115f8d21906859e35
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This change includes:
- Docker image for the test server to test non-secure and PSK-based
CoAP security modes.
- Docker image for the test server to test X.509 certificate-based
CoAP security mode.
Change-Id: Ice661917591ecaee8ebc3500209bcffc08981f65
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
qtbase, qtremoteobjects, qtquickcontrols, qtquickcontrols2
qtlocation and qttools are updated to latest dev HEAD.
qtimageformats, qtnetworkauth, qtsvg, qtdeclarative are updated to
point to latest wip/qt6 HEAD.
Change-Id: I70938d0d258208670c7d3e3f73fe3e3b274c2eb2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This reverts commit 84ff024609.
Reason for revert: <Some VM crashed again when running docker tests>
Change-Id: Iad753c1c4728c6eddc53816e2c51947ce724bf6b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is not needed. QtBase build instructions add it explicitly, as
the tests are build with a separate cmake call (to compile tests
against differently installed Qt).
Change-Id: I22fe26d4bdb9dd237df76246607d823f4b4fa315
Reviewed-by: Liang Qi <liang.qi@qt.io>
We have a code that handles that implicitly so it is not needed anymore.
Change-Id: I4aea2f55f9efd24ec7cf22cb8b413789ec3e7fea
Reviewed-by: Liang Qi <liang.qi@qt.io>
Skip qttools in this round.
Temporarily ignore qtwebengine due to QTBUG-76549.
Change-Id: I93afa1bedb18392a3f6c7ae676690b87f07aeaf9
Reviewed-by: Liang Qi <liang.qi@qt.io>
That way we can simplify product level configuration.
Change-Id: Ib855c1873d3b4566b437845ab18182a0db8e45b9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use the latest snapshot, fetch the package set from the repo itself and
set the VCPKG_ROOT environment variable as that's the vcpkg documented
interface.
The qt specific triplet defaults to static linkage, which allows
removing the %PATH% handling and resembles the same setup as in Qt 5
where we linked the 3rd-party code statically into qt.
Change-Id: I789d61b5c7258674c2dd80403efaeb891c8f75c7
Reviewed-by: Liang Qi <liang.qi@qt.io>
There is already other place in which we compile with GCC on Linux.
As we use ninja now, it has to be installed on open suse too.
Cmake port depends on system libraries therefore pcre2 needs to be
installed.
Change-Id: I92e16cc31fa60b4c591e71b58cd7235540065ac6
Reviewed-by: Liang Qi <liang.qi@qt.io>
It amends a6d159c9e7. Seems that I
computed sha1 for a wrong file.
Change-Id: Ie524b2c825189a91cd6b809ff7991af20bd301b1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The script contains a bit of data duplication, one of the fields was
not updated.
This amends 463235a0bc.
Change-Id: Idb9e88eba1f1415a0ca29f2c3a003c8a844bb024
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The from-source installation originates from a point in time where there
was no cmake release with binaries that were sufficient. That is not the
case with 3.15-rc1.
Change-Id: I385016969f21c194b25334e3af8af7283fc5873f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This reverts commit 577d01e9df.
Reason for revert: force vmx instructions to Coin level B virtual machine
Change-Id: I54a97fb6dc96315768c8047d487f1ed354ab4aac
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
These arguments are specific to the build and changes to them are _not_
affecting configuration.
Change-Id: I701b7d83511c5f80b88c5aab09eae3ecb6df74a1
Reviewed-by: Liang Qi <liang.qi@qt.io>
It is needed by new coin to support cmake build as only
there configuration arguments are separated from features.
Change-Id: I960ec693f80803fd86de472efc953a38358ae14e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
DISTRO_OPTS was missing quotes.
The same thing is also done in 3e6a04c09d.
Change-Id: Ibb237b791fedea4edde2ca0ef152553502462129
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
(cherry picked from commit 04fa1bf4ef)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Get to a smaller set to reduce load on the CI and have faster
turnaround times while developing. Remove some older compilers
that do not support the minimum C++ feature set we want to require
for Qt 6.
We'll need to revisit and probably expand this set when we get closer
to releasing Qt 6.
Change-Id: I6afba8b3caca0fac5bbf80efdcde7714b8d1ab76
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This external dependency is now required by QtCore on macOS.
Change-Id: I4eef98e8e54f00861c1e9469dfbac61979d652e8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This external dependency is now required by QtCore on Linux.
Change-Id: I47ba758e86e110c33f9e2bc7607ff9352892470a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Split the creation of the test images and the creation of the
docker environment. This way, one can easily recreate the test
images, without requiring to re-provision everything.
Change-Id: I35bbe8d8bf497f16d9be92cbaa2d9001f8eee247
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
This external dependency is now required by QtCore on Linux.
Change-Id: I910a3e17ec4d6c10ad4e1a9dfc31d1340fe110de
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This change disables all modules except qtbase from the build and also
reduces the build to one configuration. This is not intended to be
merged back to qt5/dev but rather a starting point to build up cmake
builds in the CI platform by platform and module by module.
Change-Id: I899da885dacb32188a0d02b2301df3d4450c0589
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Used for dropping packets on a specific port.
Needs to be launched with the NET_ADMIN and NET_RAW capabilities to be
able to actually be able to interact with iptables, this is done in
docker-compose.
Change-Id: I5093d19fbc269f42fe3e314e9344866fa5b79999
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
For its imap server, needed in various tests
Change-Id: I7ad11342f362392edec2f15c781f4c48deeeff30
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Needed in the QUdpSocket test for the echo service and in the QSslSocket
test for the daylight service.
Change-Id: Ic7143eb7abd37dbf2c20ddb4b52cdd5ea3f0d193
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Sometimes when trying to stop windows update service it fails.
Will now retry disabling wuauserv
Task-number: QTQAINFRA-2632
Change-Id: I5b6bf40aa15bb1f5225dc51e2f7212a01a13e9a6
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Comparing to the previous release, Ubuntu 18.04 includes dante-server
1.4.2 by default. Therefore, it doesn't rely on the Third-party PPA.
The SHA-1 of the provisioned images in docker cache:
qt-test-server-apache2_18.04:69478e75b362d57691a53700434a7034d471459e
qt-test-server-squid_18.04:cd5a5e2ff5d23c9a7adef1bd82847e027c090e5b
qt-test-server-vsftpd_18.04:a40425c0494f8f4e8ba27ac9fb5cc02aaedd62d8
qt-test-server-ftp-proxy_18.04:5f78e23a0579a579fcae7f3e5704bb5eec0e2f6d
qt-test-server-danted_18.04:d590b915cda9d524620d18a0398fdfa4d5876f97
Change-Id: Iffb4abe144a957465a2daab657c6259f0b75e800
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
After the system reboots, the docker machine is created, but in a
stopped state. To handle the case that a developer may rerun the
provisioning scripts for the missed docker images, make sure the
docker machine is both started and running with new TLS certificates.
Change-Id: Ibdb58152cac860132a77d6d094f9bca20a5e95e8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Build and cache docker images to VirtualBox virtual machine.
1. Download and install the docker tool kits and Apple Bonjour
2. Deploy boot2docker image into VirtualBox via docker-machine commands
3. Use Git Bash to run the shared provisioning scripts
4. Print CPU features to verify that CI has enabled VT-X/AMD-v support
5. Disable Hyper-V from Windows 10 Pro/Enterprise editions
Change-Id: I5520e4a28376aba14f880c077bd7b083be971f0a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For debug purpose, print the installed version of docker,
docker-compose, and docker-engine. Because 'docker info' is related to
the docker-engine, postpone calling the command until docker virtual
machine has been created.
Change-Id: I4c869b7122b831b7f22c9c3846ac9cbe47c3b355
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
To reuse the provisioning scripts for all platforms, they are moved to a
shared folder (coin/common/shared/testserver). The scripts of macOS and
linux are combined and controlled by an input parameter (macos/linux).
Change-Id: Ibf9a438d1825d01d707c2fc8fbcf2bc70a8b4902
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
2019-02-02 12:23:07 +00:00
747 changed files with 11254 additions and 33362 deletions
# This script will remove unneeded Tasks from Task Scheduler
# Application Experience 'Microsoft Compatibility Appraiser' - "Collects program telemetry information if opted-in to the Microsoft Customer Experience Improvement Program."
# Application Experience 'ProgramDataUpdater' - "Collects program telemetry information if opted-in to the Microsoft Customer Experience Improvement Program"
# Autochk 'Proxy' - "This task collects and uploads autochk SQM data if opted-in to the Microsoft Customer Experience Improvement Program."
DisableSchedulerTask"Autochk\Proxy"
# Chkdsk 'ProactiveScan' - "NTFS Volume Health Scan"
DisableSchedulerTask"Chkdsk\ProactiveScan"
# Chkdsk 'SyspartRepair'
DeleteSchedulerTask"Chkdsk\SyspartRepair"
# Customer Experience Improvement Program 'Consolidator' - "If the user has consented to participate in the Windows Customer Experience Improvement Program, this job collects and sends usage data to Microsoft."
# Customer Experience Improvement Program 'sbCeip' - "The USB CEIP (Customer Experience Improvement Program) task collects Universal Serial Bus related statistics and information about your machine and sends it to the Windows Device Connectivity engineering group at Microsoft. The information received is used to help improve the reliability, stability, and overall functionality of USB in Windows. If the user has not consented to participate in Windows CEIP, this task does not do anything."
# Diagnosis 'Scheduled' - "The Windows Scheduled Maintenance Task performs periodic maintenance of the computer system by fixing problems automatically or reporting them through Security and Maintenance."
DisableSchedulerTask"Diagnosis\Scheduled"
# DiskDiagnostic 'Microsoft-Windows-DiskDiagnosticDataCollector' - "The Windows Disk Diagnostic reports general disk and system information to Microsoft for users participating in the Customer Experience Program."
# Windows Update Medic Service (WaaSMedicSvc)'PerformRemediation' helps recover update-related services to the supported configuration.
# WaasMedicSvc keeps re-starting Windows Update, even if it disabled manually.
# Even Admin user don't have privileged to disable PerformRemediation from Task Scheduler which means that WaaSMedicSvc.dll need's to be removed from the system
# Install Visual Studio $version with $update_version
# Original download page: https://www.visualstudio.com/en-us/news/releasenotes/vs2015-update3-vs
$version="2015"
$update_version="3"
# Only way to install specific Visual studio release is to use feed.xml.
# Visual Studio $version setup will use the feed.xml that was available when $update_version released -> 'https://msdn.microsoft.com/en-us/library/mt653628.aspx'
# These parameters will install Visual Studio Enterprise Update $update_version (the original Update $update_version without any further Update $update_version-era updates)
# This script will remove unneeded Tasks from Task Scheduler
# Application Experience 'Microsoft Compatibility Appraiser' - "Collects program telemetry information if opted-in to the Microsoft Customer Experience Improvement Program."
# Application Experience 'ProgramDataUpdater' - "Collects program telemetry information if opted-in to the Microsoft Customer Experience Improvement Program"
# Autochk 'Proxy' - "This task collects and uploads autochk SQM data if opted-in to the Microsoft Customer Experience Improvement Program."
DisableSchedulerTask"Autochk\Proxy"
# Chkdsk 'ProactiveScan' - "NTFS Volume Health Scan"
DisableSchedulerTask"Chkdsk\ProactiveScan"
# Chkdsk 'SyspartRepair'
DeleteSchedulerTask"Chkdsk\SyspartRepair"
# Customer Experience Improvement Program 'Consolidator' - "If the user has consented to participate in the Windows Customer Experience Improvement Program, this job collects and sends usage data to Microsoft."
# Customer Experience Improvement Program 'sbCeip' - "The USB CEIP (Customer Experience Improvement Program) task collects Universal Serial Bus related statistics and information about your machine and sends it to the Windows Device Connectivity engineering group at Microsoft. The information received is used to help improve the reliability, stability, and overall functionality of USB in Windows. If the user has not consented to participate in Windows CEIP, this task does not do anything."
# Diagnosis 'Scheduled' - "The Windows Scheduled Maintenance Task performs periodic maintenance of the computer system by fixing problems automatically or reporting them through Security and Maintenance."
DisableSchedulerTask"Diagnosis\Scheduled"
# DiskDiagnostic 'Microsoft-Windows-DiskDiagnosticDataCollector' - "The Windows Disk Diagnostic reports general disk and system information to Microsoft for users participating in the Customer Experience Program."
# Windows Update Medic Service (WaaSMedicSvc)'PerformRemediation' helps recover update-related services to the supported configuration.
# WaasMedicSvc keeps re-starting Windows Update, even if it disabled manually.
# Even Admin user don't have privileged to disable PerformRemediation from Task Scheduler which means that WaaSMedicSvc.dll need's to be removed from the system
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
