Set the VCPKG_INSTALLED_DIR, VCPKG_HOST_TRIPLET, VCPGK_TARGET_TRIPLET
environment variables after vcpkg ports installation. These variables
will be used when building Qt modules to setup the correct build
environment.
(This commit extends original f41e72adc6)
Change-Id: I7956fc828d6c490f19bfa5222d7db29d1550687e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The flite plugin for QtSpeech wasn't tested on CI as the development
files weren't installed.
Pick-to: 6.8 6.9 6.10
Change-Id: Ieefe42f67009b99cc95f54567f224972d12c1538
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Tim Blechmann <tim.blechmann@qt.io>
Files were prebuild by cloning emsdk repo in their respective VM
produced by Coin provisioning, and running './emsdk install 4.0.7' and
'./emsdk activate 4.0.7' in macOS 15 and OpenSUSE 15.6. And just
'./emsdk install 4.0.7' in Windows 10.
This amends 5510396f4d9f175e7f61a953ea0722ce57d059d4
Pick-to: 6.10
Task-number: COIN-1232
Change-Id: Ifa768173093c4b6b90599d0fff8b34a1db8b1bbc
Reviewed-by: Lorn Potter <lorn.potter@qt.io>
Emscripten 4.0.7 requires Python +3.8, OpenSUSE does have Python 3.11
but its path is only set to PYTHON3_EXECUTABLE envvar defined in
08-pythondev.sh.
OpenSUSE 15.6 comes with Python 3.6.15 which the previous emscripten
3.1.70 used.
Pick-to: 6.10
Change-Id: Ied63ace32b7fb252d124ad447bc56dba353ff403
Reviewed-by: Lorn Potter <lorn.potter@qt.io>
Native WoA builds are done with -no-opengl switch,
therefore native test coin nodes do not need to have
openglsw installed.
(ms-windows-store://pdp/?productid=9NQPSL29BFFF)
However, when trying to run cross compiled WoA on native
test nodes this ends up with:
tst_QOpenGLWindow::create() Failed to load opengl32sw (%1 is not a valid
tst_QOpenGLWindow::create() Failed to load and resolve WGL/OpenGL
function
However, adding no-opengl flag would affect our release binaries
and would remove qt3d and qtdatavisualisation from packaging.
Use run-opengl-test feature instead.
Pick-to: 6.10
Task-number: COIN-1211
Change-Id: Id21051bc69e431a9d3773c4b4e0c8c2e63315b42
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This change removes 'InsignificantTests' from all 24H2 targets and also
adds 'Packaging' to 24H2 targets that have 'Packaging' in equivalent
23H2 targets. [CI Platforms]
Pick-to: 6.10
Task-number: QTQAINFRA-6734
Change-Id: I6056ddafcb351875d297ab52565e6b20ba75bb2b
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
This path will be used as CMAKE_MAKE_PROGRAM explicitly.
Change-Id: Ic15253f837b798c468f782ad4116d1ba4cc7c934
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Ubuntu 24.04 GNOME X11 still has too many flaky issues in our
CI, which blocks integrations too much.
This reverts commit 365860ce42.
Pick-to: 6.10 6.9 6.8
Task-number: QTBUG-137909
Change-Id: I058c5d9c5e67bbea4a5ea88a915270ef00110d7a
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Ubuntu 24.04 GNOME X11 still has too many flaky issues in our
CI, which blocks integrations too much.
This reverts commit e2e25e8a66.
Pick-to: 6.10 6.9 6.8
Task-number: QTBUG-137909
Change-Id: Ifcb56d0172b7bd0e66d1fe6e764ea6643b8e4834
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Ubuntu 24.04 GNOME X11 still has too many flaky issues in our
CI, which blocks integrations too much.
This reverts commit 6db000ab67.
Pick-to: 6.10 6.9 6.8
Task-number: QTBUG-137909
Change-Id: Iec2323da11354b3176c2428e441965b77fd768a1
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Previous patch 75fea893b1 introduced
a small bug where multiple nightly builds of FFmpeg were being
outputted into the same directory, effectively causing them to
overwrite each other.
This patch gives the nightly builds their own subfolder for outputted
library files.
Pick-to: 6.10
Task-number: QTQAINFRA-7069
Change-Id: I5f7e111708aecedd2817888948b77b8163f0452d
Reviewed-by: Artem Dyomin <artem.dyomin@qt.io>
Set the latest NDK envvars for android-quick-minimal and Android 16.
Pick-to: 6.10
Task-number: QTQAINFRA-7069
Change-Id: Ib533eeb08a31437967485cc35f40e434c2880108
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Bug reports from the nightly target are updated to the ticket.
Task-number: QTQAINFRA-5945
Change-Id: I9e0622b3da4909dc72af1da8c0deb260f6cd5a3e
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Multiple Android NDKs are installed in provisoning. FFmpeg build uses
NDK in its build process for Android, so this change makes provisioning
build multiple Android FFmpeg builds, so each Android nightly can use a
FFmpeg build where its corresponding NDK version was used.
Pick-to: 6.10
Task-number: QTQAINFRA-7069
Change-Id: Ie4457c87b7b75e0c711a76bd8170e718cbda445d
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This change makes macOS provisioning also install older NDKs for
Android (if set), which will be used in nightly targets.
Pick-to: 6.10
Task-number: QTQAINFRA-7069
Change-Id: Ie176c5ea69a1398afa69691ad6f37b7af2f66dfc
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This change makes provisioning also install older NDKs for Android,
which will be used in nightly targets.
Pick-to: 6.10
Task-number: QTQAINFRA-7069
Change-Id: Ia8695383e94df282822da9019c33f1004a879bf6
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
When you use the helper to set an envvar in provisioning, you can not
reference the machine scoped variable in a later .ps1 script in the same
provisoning run using the direct/static reference '$env:NAME', instead
you have to use a more verbose method with e.g. 'Get-Item' cmdlet and/or
set the envvar additionally to the process scope yourself.
This change makes the helper also add process scope to the envvars, this
way envvars set in provisioning can be simply referenced with
'$env:NAME' in later provisioning scripts, which is consistent with the
way you can use SetEnvVar helper in Unix and directly reference the
envvar with just its variable name in later .sh scripts.
This change also removes duplicate local scope envvar definitions now
that Set-EnvironmentVariable helper does it.
Pick-to: 6.10
Change-Id: I804fa8f8dfce742a84e8b4bc077f466820589f7e
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
It's easier to see what submodules fail to synchronize and make
the actions on them, rather than looking into full log.
Change-Id: I98bb3b42783e431a53e536e8104a460ba6bc63e9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Disabling HarfBuzz causes tst_qglyphrun and tst_qfontdatabase to fail.
Also without HarfBuzz, tst_qxmlstream is too slow and always times out.
Task-number: QTBUG-137809
Change-Id: I5794c7f2f3b371f80dcfbb9d53f95572d874bf2a
Reviewed-by: Toni Saario <toni.saario@qt.io>
Qt Multimedia needs correct permissions set in order to run automated
tests. This is currently being done on our macOS ARM targets, but not
x86 targets.
This patch runs the scripts on relevant x86 targets.
Pick-to: 6.10 6.9 6.8
Task-number: QTBUG-137582
Change-Id: Ia13b8f190938b44b8a14fc8c796912910a8d6d88
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This script has previously failed under some configurations, while
also failing to stop provisioning.
This patch enables fast-fail behavior, catches potential issues with
missing executables early with a descriptive error message. This
should allow us to detect if the required packages are missing
in the future, and stop provisioning accordingly.
This patch also installs the necessary packages on the relevant
CI build targets.
Task-number: QTBUG-136930
Pick-to: 6.10 6.9 6.8
Change-Id: I7c781264ad67508d19fd44556a9caf0f201638d4
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
with Qt Wayland QPA/client were moved into qtbase.
[CI Platforms]
Pick-to: 6.10
Change-Id: Ia268f974784c8f2cc0b4245041801a6442eaabce
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
Large Send Offload (LSO) was originally disabled because it caused
deterioration in network throughput but the cause of that deterioration
is now fixed in infra and LSO should be enabled back as it improves
network performance. LSO is enabled in Windows by default.
Pick-to: 6.10 6.9 6.8 6.5
Task-number: QTQAINFRA-7236
Change-Id: I243632d958007142792df0cbd9a341fb2b86df69
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
We are going to run test suite twice with qtwebview, with
different backends on windows. Therefore install
webview2 to build plugin also on other nodes.
Task-number: QTBUG-128447
Task-number: QTBUG-75747
Pick-to: 6.10
Change-Id: I88da09eb9bf9e58f630ed65071d33bd4a89ac094
Reviewed-by: Toni Saario <toni.saario@qt.io>
This makes the qemu virtualize the target rather than emulating
it. Virtualization allows few times better performance in tests.
Pick-to: 6.9 6.10
Change-Id: I7a5f7e3e2b04c52034325459ef05bfc0dce5d0b7
Reviewed-by: Simo Fält <simo.falt@qt.io>
Moved the name construction to a dedicated function so that it can be
reused in `call_cmake_in_qt_build_dir`
Change-Id: Iace4130e79cd08f622e762e2861948db5f2bd972
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
After all repos are configured and built, do another round of
reconfigure.
This can catch issues in the find_package of plugins. E.g. when running
the builds for qtbase -> qtdeclarative -> qtmultimedia, during the
first pass qtdeclarative is reconfigured without any plugins present,
but in the second pass additional plugins will be added in the
`find_package` chain.
Change-Id: I298492463e38e57f250ee22f1e8c7f880ce9940a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is enabled by default and replaces the hard-coded qtdeclarative
dependencies.
Change-Id: I58dbf4f801aeacf73a0f38a5cbdb856418bddae4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If a list is provided to `OUTPUT_EXCLUDED_OPTIONAL_DEPS` for
`qt_internal_*_module_dependencies`, all optional dependencies that were
not marked as required when resolving the requested modules are saved to
the list.
Change-Id: I2c239a79f483c78af0d649c5b437db03d09eea57
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When using local sources, the sync step is replaced with setting up
symlinks to the current source folders.
Change-Id: I16500c130b35b962e9d0398498e0c83d71bdc149
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also `configure_qt` did not have `CMAKE_GENERATOR` defined in the args.
Change-Id: I84a2aed1b992d8169d92fe727094708d8bd447b0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Allow to define variables used in `ConfigureBuildQt` at configure time.
The preference is local var -> environment var -> cache var -> default.
Change-Id: Ib4bc4f31b3764a6c734e24562d18418560c3a8a8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This script requires that we have setup specific environment variables
ahead of time. If they are missing, we are prone to receiving
non-descriptive error messages.
This patch adds checks for the required environment variables, and
gives useful error messages if they are not set correctly.
Pick-to: 6.10 6.9 6.8
Change-Id: I0cfb99187f303b22dbdd46a7a848b85dbf571aad
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This patch adds an optional parameter to the provisioning script
'install-ffmpeg-ios.sh', allowing us to override the output directory
for which the finalized library is installed.
This is particularly useful for local builds, where we often need
multiple different versions of FFmpeg installed, for different Qt
versions.
This patch has no impact for existing coin workflows.
Pick-to: 6.10 6.9 6.8
Change-Id: Ib0764eb29b84ae8badcfb48424f86316f3b2b650
Reviewed-by: Simo Fält <simo.falt@qt.io>
In the provisioning script 'install-ffmpeg-ios.sh', we have a variable
'prefix' controlling where to install the finalized library. The value
of this prefix is sometimes hardcoded into some of the temporary build
directories, making the script break if we actually modify the 'prefix'
variable. This means we currently cannot easily change the output
directory.
This patch modifies 'install-ffmpeg-ios.sh' so that the 'prefix' is
applied consistently throughout the script, allowing us to change
the output directory in the future.
Pick-to: 6.10 6.9 6.8
Change-Id: I3458984aa22f8c82ed4d0bfac8ac8e71356e8789
Reviewed-by: Simo Fält <simo.falt@qt.io>
This patch adds an optional parameter to the provisioning script
'install-ffmpeg-macos.sh', allowing us to override the output directory
for which the finalized library is installed.
This is particularly useful for local builds, where we often need
multiple different versions of FFmpeg installed, for different Qt
versions.
This patch has no impact for existing coin workflows.
Pick-to: 6.10 6.9 6.8
Change-Id: If31922e931db19ab189850b975ce0131a64321b4
Reviewed-by: Simo Fält <simo.falt@qt.io>
