23H2 is replaced by 24H2. [CI Platforms]
Task-number: QTQAINFRA-6734
Change-Id: Ib136f46a6725aeb929d7bd406fbb31a290f71e58
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
(cherry picked from commit 38fe4599c7)
Reviewed-by: Simo Fält <simo.falt@qt.io>
Native WoA builds are done with -no-opengl switch,
therefore native test coin nodes do not need to have
openglsw installed.
(ms-windows-store://pdp/?productid=9NQPSL29BFFF)
However, when trying to run cross compiled WoA on native
test nodes this ends up with:
tst_QOpenGLWindow::create() Failed to load opengl32sw (%1 is not a valid
tst_QOpenGLWindow::create() Failed to load and resolve WGL/OpenGL
function
However, adding no-opengl flag would affect our release binaries
and would remove qt3d and qtdatavisualisation from packaging.
Use run-opengl-test feature instead.
Task-number: COIN-1211
Change-Id: Id21051bc69e431a9d3773c4b4e0c8c2e63315b42
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
(cherry picked from commit c73dbf6dfe)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
This change removes 'InsignificantTests' from all 24H2 targets and also
adds 'Packaging' to 24H2 targets that have 'Packaging' in equivalent
23H2 targets. [CI Platforms]
Task-number: QTQAINFRA-6734
Change-Id: I6056ddafcb351875d297ab52565e6b20ba75bb2b
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
(cherry picked from commit 15872ba2cc)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Set the latest NDK envvars for android-quick-minimal and Android 16.
Task-number: QTQAINFRA-7069
Change-Id: Ib533eeb08a31437967485cc35f40e434c2880108
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
(cherry picked from commit 6e478e595c)
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
Multiple Android NDKs are installed in provisoning. FFmpeg build uses
NDK in its build process for Android, so this change makes provisioning
build multiple Android FFmpeg builds, so each Android nightly can use a
FFmpeg build where its corresponding NDK version was used.
Task-number: QTQAINFRA-7069
Change-Id: Ie4457c87b7b75e0c711a76bd8170e718cbda445d
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
(cherry picked from commit 75fea893b1)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
This change makes macOS provisioning also install older NDKs for
Android (if set), which will be used in nightly targets.
Task-number: QTQAINFRA-7069
Change-Id: Ie176c5ea69a1398afa69691ad6f37b7af2f66dfc
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
(cherry picked from commit bf04a7a94d)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
This change makes provisioning also install older NDKs for Android,
which will be used in nightly targets.
Task-number: QTQAINFRA-7069
Change-Id: Ia8695383e94df282822da9019c33f1004a879bf6
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
(cherry picked from commit 687b73cde0)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Adding no-opengl flag affects our release binaries
and removes qt3d and qtdatavisualisation from packaging.
Use run-opengl-tests feature instead.
This reverts commit 9b7d6aedbc.
Task-number: COIN-1211
Fixes: QTBUG-136360
Pick-to: dev
Change-Id: Iaeb1dfa93e33a1f2d94357c6b4c9116e7633fd3f
Reviewed-by: Michael Brüning <michael.bruning@qt.io>
We already have same config in u2404.
Replace the usage of ubuntu-22.04-developer-build with u2404 one.
Pick-to: 6.9 6.8
Task-number: QTQAINFRA-7146
Change-Id: Ie304b3abbe6da9b203c1ce7eec45d7f9254a7392
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 6db000ab67)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
We already have two tests on u2404.
Replace the usage of ubuntu-22.04-developer-build-x11-tests with u2404
one.
Pick-to: 6.9 6.8
Task-number: QTQAINFRA-7146
Change-Id: Ib3b1888e1bbb70637432ac70f6116b723e71320d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit e2e25e8a66)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Qt Wayland client was moved into qtbase. We will try to enable
them from qtbase to all modules in the future in dev. For 6.9
and 6.8, they are InsignificantTests, waste some CI resources.
Perhaps we can fix them later, but I don't think it's worthy.
Pick-to: 6.9 6.8
Change-Id: I0f26312284bec4f02da915e829d3a68aac820ceb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 57340da291)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
We used to build the documentation with these configurations but they
changed to developer-builds and the documentation was moved to a
separate configurations (documentation-warnings, offline-documentation).
We added those configurations but ignored the developer-builds, and at
the moment they are not doing anything expect wasting resources when
acquiring VMs, so let's get rid of them.
Pick-to: 6.9
Fixes: QAA-2976
Change-Id: Ia9509e43aec2974bae098de8a2d13ac9d29e2fad
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
(cherry picked from commit aae8dc578b)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Change is done in Tier 1 image:
qtci-linux-SLES-15_SP6-x86_64-52
Task-number: QTBUG-136467
Change-Id: I2924f3250dbe914b0c6bc687241725175d5f7aa5
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
(cherry picked from commit 45ffa61110)
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Enables WOA test running in webengine. Which is unable to
build the native WOA target.
Add 'fake' configure argument -corss-compiled to
so test instruction on native windows arm have
a chance to bailout (qquickeffect maker is never
cross-compiled)
Task-number: COIN-1211
Change-Id: Ie920f65f9ec260c0c1a7111e495fd9a86adee5f6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add a new nightly platform configuration to run qt5.git RunCMake
tests.
Currently this will test the init-repository script, and will also
attempt to build and install Qt in various configurations that
developers use locally.
Change-Id: I74e0befc76ef0702c9036d30c85b8cf16b0b98a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Virtio drivers were updated 0.1.204 -> 0.1.271 which seems to fix
network issues in CI. System OS name is also changed to 'WIN-23H2-X64-55' (15 character limit).
At the same time, 23h2 -54 began to receive a popup about incoming
Windows license expiration which was fixed by changing its ipk key in
-55.
Pick-to: 6.9 6.8
Task-number: QTQAINFRA-6761
Change-Id: Iace589156f878ec63e277ab5e30db3264fb29ebc
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
These modules build, but their tests do not. Remove tests from the
config to allow it to be blocking.
Change-Id: I5913835b7621494aa59671bb34b1faeaeaf3442c
Reviewed-by: Simo Fält <simo.falt@qt.io>
Which gets us Xcode 16, with the macOS 15 SDK.
Pick-to: 6.9
Change-Id: I3c7936885e97e479873c4d012adca0d67765c907
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Native WoA builds are done with -no-opengl switch,
therefore native test coin nodes do not need to have
openglsw installed.
(ms-windows-store://pdp/?productid=9NQPSL29BFFF)
However, when trying to run cross compiled WoA on native
test nodes this ends up with:
tst_QOpenGLWindow::create() Failed to load opengl32sw (%1 is not a valid
tst_QOpenGLWindow::create() Failed to load and resolve WGL/OpenGL
function
Use the same switch on cross compile WoA configuration.
Note this can have the impact on installer binaries.
Task-number: COIN-1211
Change-Id: I508587f25701990c438f315bd9163fdd691ddeb3
Reviewed-by: Simo Fält <simo.falt@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Which gets us Xcode 16, with the macOS 15 SDK.
Pick-to: 6.9
Change-Id: I755c27f64f903b281f5d1c7947fbf370ddc3ee17
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
There are two image templates right away: -70 is Windows 11 with no
Visual Studio or Windows SDK ever installed. -71 includes VS2022 17.9.1
(MSVC 14.39.33519) and Windows SDK 10.0.26100.1742
Image changes compared to 23h2:
- VS2019 is left out as it's no longer used in provisioning scripts.
- Old DirectX installation (10-dxsdk.ps1) is left out. It's legacy,
originally used for Windows 7, and newer libraries should be found
from Windows SDK.
- 08-libclang-v100-dyn.ps1 is removed as it's no longer used. It had
dependency to VS2019.
- These images use UEFI instead of BIOS.
[CI Platforms]
Task-number: QTQAINFRA-6734
Task-number: QTQAINFRA-6823
Change-Id: I53a62c74b07d7fbfc9b1afbe44444272ae7c51e7
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
Reduce ci integration time for qtqwebengine winarm64, where doing
qthost msvc22 target takes ~5h compared to mingw ~15 min.
Add mingw runtime to path for WoA cross compile node.
Task-number: COIN-1211
Change-Id: Iecd6f924544d2a17a595ac85473f51b599f24202
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We will use RHEL9 to build prebuild binaries from Qt 6.10 ->
Change-Id: Ib49908c2997f5faccc9aa5e32b60088658d405d8
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
Starting from 6.9 the "ubuntu-22.04-documentation-x11-tests" config
was replaced by "ubuntu-22.04-developer-build-x11-tests". The new
configuration doesn't test the documentation for warnings which is
why we had failures in 6.8 where to docs were checked but not in 6.9
or dev.
This commit fixes the issue by adding the relatively new
"documentation-warnings" configuration, which will once again check
our documentation.
See also 434e4a224a .
Task-number: QAA-2878
Pick-to: 6.9 6.9.0
Change-Id: I479a9606ab16f8b87009d26ab03636c4c658fcb5
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
Bug reports from the nightly targets are updated to the ticket.
Task-number: QTQAINFRA-6540
Change-Id: Ie60275b20a30bac5517a1599050feba6286a624c
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
Previous dependency platform had been removed from CI, leading nightly
builds failing silently. Changed also from MSCV to mingw since it seems
to be more commonly used among customers.
Task-number: QTQAINFRA-7017
Task-number: QTQAINFRA-7000
Pick-to: 6.9 6.8
Change-Id: I009dd5e5c5ad28434816f831de37849a53f2c24f
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
Running tests in QEMU for imx8 currently is not reasonably possible,
mostly due to lack of support from QEMU to emulate imx8 board.
Set qtmultimedia and it's dependees qtcharts and VKB as insignificant.
Change-Id: Iffc9c2e7df4bc06fd5b3c77124c650dda5696236
Reviewed-by: Simo Fält <simo.falt@qt.io>
Using original platform config to prevent unnecessary failures
in Axivion analysis.
Task-number: QTQAINFRA-7009
Change-Id: If4b35b1401226c515efd7a29ce73b2fbe408c762
Reviewed-by: Toni Saario <toni.saario@qt.io>
In practice it already is, because qtbase sets COIN_CTEST_IGNORE_EXIT_CODE
to 0 for macOS 15, and this change has propagated to qt5.git now, but this
makes it official.
macOS 15 is now a significant platform [CI Platforms]
Change-Id: I9dc8b0f56582e08560859a17304e886e7fc3020b
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
The Windows template was upgraded from -53 to -54 just after the
qtgradleplugin platform config was added, and I guess that's why this
one was missed.
Change-Id: Ibc2250a40d6e67e409cee323cb305a93e65ee7ff
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
To catch potential top-level build issues like non-unique example
names, missing AUTOGEN / moc does not exist workarounds and other
issues.
The nightly platform uses the newly introduced
'NoSubmoduleDependencies' Coin feature, which will ensure that we
only configure the qt5.git top-level build, not any of the submodules.
Change-Id: Idb79d768749311b4184e211cd54d38219bcba7c6
Reviewed-by: Toni Saario <toni.saario@qt.io>
Debian is no longer supported for Qt 6.8.1 and later
Pick-to: 6.9 6.8
Change-Id: Ic9ddac3d95451b900f60be6a90efd5fb32985601
Reviewed-by: Patrik Teivonen <patrik.teivonen@qt.io>
Reviewed-by: David Schulz <david.schulz@qt.io>
That is what we are using for packages too.
Pick-to: 6.8 6.9
Change-Id: I88ab02f577933292c882ec4633d9087b1bf957ea
Reviewed-by: Tero Heikkinen <tero.heikkinen@qt.io>
Effect of this experiment was inconclusive. In some isolated cases
limited benefit was seen, but in overall metrics no change was
observed.
Remove the feature to gain the lost computing capacity back. If the
removal causes noticeably higher flakiness etc, it can be reevaluated.
Pick-to: 6.9
Task-number: QTQAINFRA-6702
Change-Id: I001fc2d3740a287d4546d0f597e81ded9f5449cb
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
QNX qemu configs separated. QNX710 and QNX800 require different set of
dependency libraries and there's an extra image creation bug on QNX800
that needs workaround too.
QNX800 toolchain updated.
Task-number: QTBUG-131708
Pick-to: 6.9 6.8
Change-Id: I3bc5c8bb63abbb729d03fcf3afb2f7881bcdd270
Reviewed-by: Simo Fält <simo.falt@qt.io>
