This script will install gnuwin32 to the windows machines so it can be
removed from qt5
Task-number: QTBUG-73422
Change-Id: I40b7963efcf047525626fe6f1e3ba50b54d68199
Reviewed-by: Juha Karjalainen <juha.karjalainen@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Sometimes items are locked (access denied) so we need to have function
which waits and retry until removing is possible.
Task-number: QTQAINFRA-2806
Change-Id: I09055c45c0e439ed1a20eb575ee79b7ca22c5745
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Set column width to 100 as described in the official Qt coding style
(https://wiki.qt.io/Qt_Coding_Style).
Also, break constructor initializers before the colon and after the commas.
Change-Id: I6ac5a21ce831a35a0d74e699192ba981c8a8ba3c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Froglogic has not yet released Squish for Qt5.13 but we can use Squish
packages build with Qt5.12.
Remove msvc12 Squish, not needed.
Change-Id: I1de1bb67a5577fa7f7233c69c3a58bedd15fd16b
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Caused recursion in CI platform configuration parsing algorithm.
Add qt3d-runtime.txt back as regular file.
Task-number: QTQAINFRA-2804
Change-Id: I11c42a70dcd2157501d4b1f0f67fc7a77a575d31
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Env variable BREAKPAD_SOURCE_DIR had /src at end which was
not needed.
Change-Id: I4d126c3b7c3b2da03dc2a0ba075b0d4ddad92eeb
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@qt.io>
Due to typo in dxsdk.ps1 provisioning script, it did not download from
cached location. Also checksum Check was missing.
Task-number: QTQAINFRA-2614
Change-Id: I321549721b256b85513fa1e4ff57ab1302e28f43
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The content of qt3d-runtime.txt should always be the same as qt5.txt.
Change-Id: I6cdee575206332f6a719acfaacd7072a2178fd78
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Protobuf is needed for Automotive Suite
Task-number: QTQAINFRA-2314
Change-Id: I12b4248f1de5aea88f573297a47b791b5b6296fb
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
One of our configurations relied on ANGLE being the default OpenGL
configuration on Windows. This is the case at the moment, but might
change, so we should not rely on this behavior, but explicitly state the
configuration we are expecting.
Change-Id: Ie8cb215c2675faf8b514f4d9a43055638be1aaa8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The project-specific platform configuration file is renamed to follow the
convention as for other projects. This will allow Coin to recognize the
configuration that are specific for qtsaferenderer project where they
were previously (unintentionally) ignored.
Removed QNX 7 as it is in the Qt mainline configuration.
Removed Ubuntu 16.04 as Ubuntu 18.04 is now supported.
Task-number: QSR-209
Change-Id: I505edc3741dbc047b2fc23bc409016d712596872
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
A change in Android SDK prompts us now for
accepting license.
Task-number: QTQAINFRA-2591
Change-Id: I1ff05d84ccda743649c6d38784c6170e08f50eb1
Reviewed-by: Liang Qi <liang.qi@qt.io>
Installing Android toolchains and ssl headers to win10 template
and moving Android windows platform configs to win10 from win7.
Task-number: QTQAINFRA-1266
Change-Id: I9b3e3a378451e0bdfc7dc5c7b75ee035faf8994c
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
(cherry picked from commit 5a040ca46a)
Update notifier is showing when vm is running.
It can affect to test results and that's why it need to be removed
Task-number: QTQAINFRA-2453
Change-Id: Icb27ba998ef9a51aaf8f40274c182b0c3dcd496a
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Juha Karjalainen <juha.karjalainen@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
Adding in the x64 bit installers to deployment. Furthermore, we can use
the msvc2015 installer to create msvc2017 binaries with Qt.
After the licensing change, we will be able to generate packages for all
msvc based installers.
Change-Id: I96db345b535a2518c758175137c808b15130ff41
Reviewed-by: Rainer Keller <Rainer.Keller@qt.io>
QtDesignStudio requires signtools for Windows x86
Task-number: QTBUG-72907
Change-Id: I7fb15cb07511cb89d3be00e1fe65247ecc21bcfe
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
The cross-compile targets that qtsaferenderer needs do not exist in qt5
therefore we add those extra targets for CI.
Task-number: QSR-378
Change-Id: Ia07074392b09af8d111a957027407f85518e5d85
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
(cherry picked from commit f7b6a4c276)
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
CPLUS_INCLUDE_PATH and LIBRARY_PATH environmental variables had
--> : <-- at end of variable. As this adds current dir to search
path this is undesirable and causes bugs.
Change-Id: Ia36c3f3f791f5d506eea15aba6be6d665049a922
Reviewed-by: Juha Karjalainen <juha.karjalainen@qt.io>
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
- Unified Automation SDK needs to be updated to 1.6x to reflect latest
API changes
- Open62541 is now inside 3rdparty of the Qt OpcUA module. Hence, no
need to provision it.
Change-Id: I96a3764053ca684fa71f9d49e998ebe0ce45a6ae
Reviewed-by: Jannis Völker <jannis.voelker@basyskom.com>
Reviewed-by: Frank Meerkoetter <frank.meerkoetter@basyskom.com>
Reviewed-by: Rainer Keller <Rainer.Keller@qt.io>
Keys used to sign package repositories tend to have expiry dates and
therefore need to be changed from time to time. Therefore hardcoding
the key we expect here will break (as it does right now) and it's better
to retrieve the expected key via a secure transport.
The old key - per
http://keyserver.ubuntu.com/pks/lookup?search=0xC2E73424D59097AB&op=vindex
- will expire on the 12 of January. That's probably why they changed the
key used to sign the repo before the expiry.
Change-Id: I39d082a6e12731b7eb0a8214a500101ca24f8af4
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
DownloadURL returns 0 even when alt download fails.
Task-number: QTQAINFRA-2501
Change-Id: Id2fb1e0b4ff12a48b6adb27291f55fc129296233
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Adds odbc support for rhel7.
Task-number: QTBUG-72444
Change-Id: I49b1e91d9f87bdf98601627538aaa65b78440451
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Also changes the resolution of the desktop to 1280x800x32,
timezone to GMT and upgrades Xcode.
Task-number: QTBUG-70180
Change-Id: I4620cbfa3033a100b0e325951a5a9ebcbfa92751
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Liang Qi <liang.qi@qt.io>
MacOS(10.12 and 10.13) had two identical provisioning scripts for
openssl. Now unified under common.
Change-Id: If469a56d431e72b291a810fa9c1b701873fe382d
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
Automatic disk defragmentation is enabled by default on Windows
machines. It should be disabled to save some time.
Task-number: QTQAINFRA-2217
Change-Id: I3f024208bd35c9e305569e6b2b562f5a8b16f6f1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This script installs libiodbc from brew and adds it to
CPLUS_INCLUDE_PATH and LIBRARY_PATH thus enabling configure to
find it and thus enabling odbc support for qt build on macOS.
Task-number: QTBUG-58956
Change-Id: I7f865800b580a87afcc480534da57ee546c74406
Reviewed-by: Antti Kokko <antti.kokko@qt.io>
This patch only affects Windows.
Python3 provisioning took over 30-35 minutes. As both
32 and 64 bit versions are provisioned it took over 1h
this change lowers time taken to 5 minutes.
start-process with -wait flag waits for given process and its
sub-processes to exit. Wait-process insteads just waits for
process to exit.
Change-Id: Ib9a323dcf9e2d07318a0d259a72ca4c4d0a4ed80
Reviewed-by: Simo Fält <simo.falt@qt.io>
The subshell actually meant, that the http_proxy environment
variable was never seen outside that check. Thus proxy was never
used where this was checked.
Change-Id: I069f43f13dffca98d8b60a47c2e105209018c84d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We do install them on Ubuntu and openSUSE. Eventually we want to stop
using bundled xcb libraries. Currently all builds of Qt on Linux use
-qt-xcb switch (see coin/src/targetenvironments.py::LinuxTargetEnvironment),
which is the reason why things build fine, even when packages are not
present on the system.
Change-Id: I856ddb5a17768b347aec3e593d6b969109a5c3a3
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Ubuntu was the only distro that installed both of the required packages:
installPackages+=(libxkbcommon-dev)
installPackages+=(libxkbcommon-x11-dev)
RHEL 7.4 did not explicitly install any, but got libxkbcommon-dev
pulled in as gtk3 dependency. Extract from provisioning log:
--> Processing Dependency: pkgconfig(xkbcommon) >= 0.2.0 for package: gtk3-devel-3.22.30-3.el7.x86_64
---> Package libxkbcommon-devel.x86_64 0:0.7.1-1.el7 will be installed
openSUSE explicitly installed libxkbcommon-devel, but not libxkbcommon-x11-devel.
Qt official binaries are built on RHEL, where we do not have
libxkbcommon-x11-dev installed. This means that XCB plugin and
Compose input plugin would fallback to using bundled sources.
It was actually desired until now that XCB/Compose use the
bundled sources instead of linking with the library from the
system, but this was only a lucky side effect. If we had installed
libxkbcommon-x11-dev on RHEL, then Qt binaries would end up
linking with the libxkbcommon from the system, because of the
missing "-qt-xkbcommon" configre switch for release builds.
We won't bundle libxkbcommon anymore, hence we need to install
the missing dependencies, as done by this patch.
Change-Id: I5c7b8ac38c266ce81cb5a3189a9082bfd581ee31
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Free the dependencies of the specific Ubuntu packages. Ensure that test
server is using the latest version of the Ubuntu packages to test
network changes. Otherwise, all the docker files need to be manually
updated when upgrading to the next Ubuntu version (e.g. 18.04).
For debugging purpose, the installed packaged will be listed in the
provisioning logs.
Change-Id: I38d119d11f33cfd60dc34fcd57ec0fe1615e98f2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Currently Qt3d Studio build don't recognize fbx path because of space
in folder name. This change will fix it by taken use the packages which
don't have space in the folder name.
Task-number: QT3DS-2440
Change-Id: I502bb04489a03a5a81e164f8a86f3200f4ec3910
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@qt.io>
Currently Rhel 6.6 have too old Java version for Jenkins. This need to
be updated so that machine can connect with Jenkins.
Task-number: QTQAINFRA-2377
Change-Id: I653df6f1f060bdc12164cc407fcc4cd873d2b24f
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
These can cause flakiness during tests
Task-number: QTQAINFRA-2307
Change-Id: Ib8b850e3e1fabe3070bbd27785d043984e085cb7
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The currently used version of curl does not support TLS 1.2 or newer.
Since download.qt.io has minimum requirement of TLS 1.2 we need to
update the these packages.
Task-number: QTQAINFRA-2212
Change-Id: I4737443b5b2180a592a18d9095fe3f31063ba329
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Required for reading PDF doc files in RTA tests.
Task-number: QTQAINFRA-2103
Change-Id: I4da98460fb5d5ad26f9e1e16c503a0d94be047a6
Reviewed-by: Johanna Äijälä <johanna.aijala@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
(cherry picked from commit bb6a91d5d4)
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Add missing macOS and Windows Android arm64 targets.
Remove iOS target that is now included in default.txt.
Change-Id: Ifc20336b94477b2f8be456ef7f7f8bfaf8bf1190
Reviewed-by: Akseli Salovaara <akseli.salovaara@qt.io>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Swapping 32 bit windows packaging configs so that MSVC 2017 is
built as default config and MSVC 2015 only for qt5.
As the config is not part of the default.txt we have to add it as
module specific config.
Change-Id: I3c423c2c80d0093fdeca340d6faa8e162c03b5cd
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
libclang is required for qdoc.
Task-number: QTBUG-69793
Change-Id: I60b54b4338ed6fd3bae99813e268816e063c648a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Xcode and command line tools version 10 have been released, we
should start building our Qt releases with it, both for iOS and
macOS.
Installing Xcode 10.0.0 requires OS version update to 10.13.6. A new
tier 1 image has been created with the updated OS and this change
takes it into use.
Task-number: QTQAINFRA-2274
Change-Id: Ida7df234ecfd356b2cb2545ae10cd501dc47197b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
adding it to the super cache makes no sense, as that's read before
spec_pre.prf, which clears CONFIG. use the regular cache instead.
submodules do not inherit that setting, and they don't need to as per
comment.
also, don't keep adding it to the cache - the cache() function doesn't
check whether the added value is already present, so we need to do that
manually.
amends 31590c0b65.
Fixes: QTBUG-63452
Change-Id: I608559a80a7c772dbdaacfaaadb4fc268b442c39
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This will prevent passwords showing in provisioning logs.
Task-number: QTQAINFRA-2261
Change-Id: I501fd3be64514c59a604c1116113eaf975208024
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Powershell quickedit causes powershell window freeze until quickedit
mode is exited by pressing enter. For some reason quickedit mode get's
activated during build. This causes time out as agent does not get
any output from processes.
Task-number: QTQAINFRA-2263
Change-Id: I2878cc7a39bae504f826c5622cc5817fd227d7f0
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Currently the internal package mirroring is being enabled only after
the installation of the packages. It should be done before to
actually download them from the internal repo instead of the
official repos.
Change-Id: I4aeb2e463ae804bd2f8ce9536ab89fc26fedbdb5
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Using internal package mirror during provisioning reduces outgoing web
traffic by a huge amount.
Task-number: QTQAINFRA-2213
Change-Id: I6a63b51efbf411a712795a6347c2deeed6ac44d3
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Updated qtwebengine once againt to have a fix for getting beta1 out
Change-Id: I3de7ad0916e886722186f09da036ea7a398f363f
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
macOS doesn't support UTC, so we'll go with GMT.
Task-number: QTQAINFRA-1641
Change-Id: Ifae9547b010c293c4a2cb18252e8f18961a4456a
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Also as target_compiler is a column now, let's
add the missing information about android target
compiler in the rest of the configurations as well.
Task-number: QTQAINFRA-1682
Change-Id: I6de1ea40383512f5fb8b55242f1a1ac264f9d7d6
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This change will install specified packages of Emscripten and set up
the build environment for making binary artifacts of WebAssembly
Task-number: QTQAINFRA-1972
Change-Id: Ia5df6c208ea8f29ca8948f0273f321a59fc694a2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Do set correct --alternates argument for sub-submodules like
qtwebengine/src/3rdparty. So far these repositories were always
fully cloned from remote (or the mirror).
Fixes: QTBUG-61901
Change-Id: I19f5930a03ab9050b6e62ac5a5c78780d0544e03
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Some provisioning changes made to Ubuntu 16.04 didn't make it to 18.04
when the new platform was introduced. These changes need to be included.
Task-number: QTQAINFRA-2210
Change-Id: Ie8c3cfda95abadbd3a416545ebcfbbab8c0cb4ad
Reviewed-by: Dominik Holland <dominik.holland@pelagicore.com>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Update to latest Squish versions that Froglogic is providing. May need
to update to Squish 6.4 later, but now we use 6.3.2.
Change-Id: I89e1f20b58cdd2e948c8021a5fdc357bfc201db1
Reviewed-by: Liang Qi <liang.qi@qt.io>
This file needs execution rights before it can be run in provisioning.
Change-Id: Id49de89e0260b18a71cbcd4f4dc2b5a28e0a9890
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Johanna Äijälä <johanna.aijala@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The provisioning scripts supports prebuilt binaries. When available,
those are extracted taken into use. If they are not found,
sources are downloaded and built.
Task-number: QTQAINFRA-2066
Change-Id: Id1a59be2d1cbdb29d316ade572c3ce8f17ad3a6b
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Previously pip was used (instead of pip3) which caused that python2
packages were installed into the python3 wheel cache folder. Some of
the packages also worked for python3, but not all of them.
Task-number: AUTOSUITE-195
Change-Id: I393d036667b14e11dee65975ba6933e7174d0e9d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
By versioning the Xcode installation we open up for having multiple
Xcode versions installed on the same image in the future, which
allows for e.g. choosing the Xcode version in the build config.
By running xcode-select to choose the bundle, we ensure that
build steps that do not know that Xcode has been versioned
will still pick up the right compiler and SDK paths when
e.g. running xcrun -find clang.
Done-with: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Change-Id: I0bd877bd344cebdd1fbf3a3035b00069f75c4c96
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The broker is required to run tests of the mqtt module.
This is a followup of e89420945f which
was missing this part.
Task-number: QTQAINFRA-1983
Change-Id: Ibcc79aecbf1212ecc64150c911ecf296c7f58e19
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
RHEL 6 has been removed in 5.12+ verifications, so no need
to maintain those changes.
Change-Id: Ie65120bf8ec7a7d0aaa71b7c28e95283263e62eb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The path was incorrect for x86 Windows machines since they use "Program
Files" without the "(x86)" suffix.
Change-Id: Iecfee3b568a4d23b056fab230891f7eeb4d63cc8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Johanna Äijälä <johanna.aijala@qt.io>
No need to update the locate database
Task-number: QTQAINFRA-2099
Change-Id: Iae8bf26e4b04ff9c287e9e3f4cc6f492e74355e4
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Qt 5.12 will have both 16.04 and 18.04
LTS releases verified. Some configurations
are upgraded from 16.04 to 18.04.
Task-number: QTQAINFRA-1983
Change-Id: I1b5c2a1c23ce209040b3478cff21b7f6436a9b54
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
After moving the xmllistmodel into qtxmlpatterns we can reverse the
dependency. This will improve build times and cleaning up dependencies
makes sense in any case.
Change-Id: I560d51ee47167a0cb519b98a15e6eb9199b4cd79
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Task-number: QTBUG-70180
Change-Id: I6b4b90883cccfdaedbeb0440b62a1b8290655838
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This will reduce download time
Task-number: QTQAINFRA-2170
Change-Id: I8313764f7d440e2300a8efabfe4e4226a591d339
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This will reduce download time
Task-number: QTQAINFRA-2169
Change-Id: If36ac57daa7066cdd97d5d893a105b812e0eee18
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The correct vcvars resides in Visual Studio 14, not 12.
Change-Id: I89e75b4c5c7806ac451f645b3bf341f588818040
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
While the VM we launch is a clean image the spotlight starts indexing
right after the boot. That seems to require quite a lot of resources.
Build machine doesn't need the feature, so we are disabling it.
Change-Id: I2c5f0030d7a687cfbded4e9bd4da70302cb0a933
Reviewed-by: Liang Qi <liang.qi@qt.io>
Unfortunately the user-space emulation mode of qemu does not implement
MADV_DONTNEED, which is a feature that the garbage collector of QML
relies on. Patch is submitted to the qemu list and included here to fix
the imminent issue we're seeing.
Task-number: QTBUG-68349
Change-Id: I2bb15513a1e5a7ad03eeae98d77691336985a20f
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The 10.11 configurations were bumped to 10.12 configurations.
The 10.12 packaging configuration will be deleted once autotests
have been enabled for 10.13 and packaging moved to 10.13 cross
the board.
Task-number: QTQAINFRA-2055
Change-Id: I17c598a306487e9a2f72006c3fa02e4ee683ee12
Reviewed-by: Liang Qi <liang.qi@qt.io>
This modules contains qdoc as a host build tool, which needs to be built
with MinGW 7.3 as host compiler in order for the libclang linkage to
succeed. That linkage is forced via QDOC_USE_STATIC_LIBCLANG, which is
set on the Windows 10 machine.
Task-number: QTBUG-69793
Change-Id: I2f0ce81c58ae049d9d59559dfe4f457d082cc98d
Reviewed-by: Simo Fält <simo.falt@qt.io>
RTA relies on the availability of debug vclibs. The frameworks are usually
installed on first usage by Visual Studio, but as we use winrtrunner, we
have to install the packages manually.
Task-number: QTBUG-69809
Change-Id: I66cc4b04062afe634345cddc8ab4d001778274cc
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Provisioning sometimes fails if PackageKit is locked at the moment we
try to remove plasma5-pk-updates package.
Task-number: QTQAINFRA-2141
Change-Id: I5e6c2ecab87033ce01aae915813e1d5f70ea8186
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
this suppresses license checking in default_pre.prf in the super module.
submodules set it via their .qmake.conf's.
Change-Id: Ic3599613140169eeacb48385be8f324c4bef8f1a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Docker-based test server needs mdns to resolve .local while testing qt
network stack in CI. Otherwise the tests would not see announced
services.
Relates to yocto/meta-boot2qt 7608ebe44f65f4d525081cf9a5b12cfa05792a8f
Change-Id: If834b01668bcf844e475e863eb1337849c718270
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
Windows 10 has these Zune Audio and Zune Video packages installed that
often open up automatically when accessing the VMs through VNC for
example. Removing the packages gets rid of this annoyance.
Task-number: QTQAINFRA-2121
Change-Id: I09aa276fcb06ad84321709e64bcfd71fbd33c657
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Setting the grub timeout to 0 will save us some time during the bootup
phases.
Task-number: QTQAINFRA-1703
Change-Id: I6dc6fbac0cfe54608068531eba4808cf87cf435c
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The photoviewer demo imports QtQuick Controls 1 and the coffee demo
imports Qt Quick Controls 2. This is a run-time dependency for dynamic
builds, but for static builds it becomes a build time dependency.
Change-Id: Ie8d7dcf85c2dfe93033fa9254ee350fb654475c3
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
at least the maroon demo will use the multimedia module if available.
Task-number: QTBUG-69823
Change-Id: I7e0f7103aaf1a33a755b9a362274273a9b997f37
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Alexander Shevchenko <sav_ix@ukr.net>
Docker-based test server needs mdns to resolve .local while testing qt
network stack in CI. Otherwise the tests would not see announced
services.
Relates to yocto/meta-boot2qt 2f17ab34687ef100c4390057dd220ab431ec8ff8
Change-Id: I5313fc34634211ae6950769518c68c2b11d77eb3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
BlackBerry has released security updates for QNX 7.0.0 and 6.6.0 that
we want to include in CI since out customers will most likely have them
installed.
Task-number: QTQAINFRA-1535
Change-Id: I6f38ca8831bb91609f79385a2dcbc51302f68eb8
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
There are no distinct commercial and opensource source archives anymore.
Some people do also build from git, so adding the archive name
here is just misleading. Given that users read the README, they arguably
should know already where the sources are ...
Change-Id: I42aac84cd0c904b7b6f2dbb19cacf8b3021f6b21
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Updates required for latest MQTT5 features and fixes.
Change-Id: I63e967efafbe1b22800e338b6c431febe3389a45
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We need to upgrade the Android NDK version
when we switch to building with clang.
Task-number: QTQAINFRA-1681
Change-Id: Ic43b28ead393ec5828b099727182df5f4424f419
Reviewed-by: Liang Qi <liang.qi@qt.io>
This submodule have not been maintained in several years. Building currently
fails due to qtquick1 not being in sync with interface changes in qtbase. I
think it's therefore better to just remove the submodule altogether. That way
we stop causing problems for external developers wanting to build Qt from
source.
Task-number: QTBUG-69725
Change-Id: I905888d99f510be12c484f7da52986c9b1e9478f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Using cached local repositories saves us outgoing
bandwidth. This way we also get version pinned packages.
Change-Id: I475c62c3e408d71e85f24d74dd384c62de583403
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
PackageKit and gnome-software run in the background and at some point
will show popups to ask the user to update.
Change-Id: I99a3314c8788c7cc06e479718306a822bf255fbd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
After commit 01d2f35b6988edacc741b358703d16d4cd8c199a in qtbase, the
existing CONFIG+=lrelease in examples/demos/photoviewer/photoviewer.pro
now calls lrelease and thus requires qttools.
Change-Id: I7cabc70fc6316a49793d7e91a493d8a5e5028295
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Instead of downloading the packages during the compile/configure
step setup a wheel cache folder during the provisioning phase
Task-number: AUTOSUITE-195
Change-Id: I465f1be7cdd351e7680dcd8ae22d5e97ddf8cb2d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It seems that cmake 3.6 had issues with more recent XCode. Since XCode 8
the sysroot folder might have been unversioned (MacOSX10.12.sdk ->
MacOSX.sdk). In that case older cmake can't detect correct SDK
version. This is causing issues when building Pyside2.
Change-Id: I09f0ed4fe6d15ba3d60aa3a6e9a9b3b9091996c8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The autodetection of cmake used a different python for x86 builds of
msvc. Those did not have six installed. Instead, use one python for all
build variants to stay consistent.
Change-Id: Id1ad2bc320e47a68358364ff94d78993ba0b0848
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The challenge of connecting Docker containers from the host is to
resolve a predefined hostname to an IP address assigned at runtime. For
Unix-like platforms such as Ubuntu, it can be done by either hard-code
the IP addresses or creating a DNS server. Both of them are not
user-friendly which need root permission to modify system files.
Avahi is a free Zeroconf implementation and provides multicast DNS
(mDNS) service discovery. It enables Docker containers to publish their
services on a local network. For the host systems supporting mDNS
technology, they will automatically discover the services in a local
domain without extra user-efforts.
Task-number: QTQAINFRA-1686
Change-Id: I1ef464a455cef5d331a3e2eb0194e2741172ef95
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
winrtrunner is from dev. The only change to the previous version is a
longer timeout for deployment, as CI runs now and then failed, because
deployment did not finish in time.
Change-Id: I244e68af447db9298d64bb791048032edd3ec1fd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use the updated install path for OPEN62541_PREFIX argument in CI.
Change-Id: Ifa06d002516da20001a94ff6e7066504fa471a8f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Using CI_OPEN62541_<compiler>_<arch>_PREFIX is more verbose.
Change-Id: I58ed0f31935308389f274f93578361db3dc01daa
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
UA C++ SDK is one of the supported OPC UA backends in the Qt OpcUa
module. The aim is to have packages available with Qt 5.12.
Change-Id: I2d1b3c6c583f4563e7470317d4f73f853bd34c72
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Build and cache docker images based on the configurations in testserver.
1. Download and install the docker engine and docker-compose extension.
2. Append address and hostname of test servers to CI environment.
3. Build and tag the docker images by the SHA-1 of server context.
Task-number: QTQAINFRA-1686
Change-Id: Ib9b58d45856682ddec04af045e1eab18e14a85fb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
We don't need to install the MinGW builds of libclang 6.0 for
configurations where the Qt MinGW build can't use them.
Task-number: QTBUG-68064
Change-Id: Id9183ccfc15a7a81edb67df371075d584e5cbae8
Reviewed-by: Simo Fält <simo.falt@qt.io>
Sometimes unmount of squish fail because resource busy even if
the installation is already succeeded. To avoid this let's add force
option to make sure unmounting works every time.
Task-number: QTQAINFRA-1964
Change-Id: Icacd01341d09577d9880e3ed208cb6ea18a7ac4f
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Libclang must use cached url (ci-files01-hki) to reduce the download time
Libclang release_60 versions were rebuild which requires sha1 changes
Task-number: QTQAINFRA-1966
Task-number: QTQAINFRA-2100
Change-Id: Iddf47a2a3a5bc38dbed684320120164bb40c028c
Reviewed-by: Simo Fält <simo.falt@qt.io>
We are using a statically built Qt because it eases deployment of
the built tests. As static linking is broken on MSVC 2017, 2015 is
used.
Change-Id: Ie0cc0ee8229da8772ae548ca077e48086ab03adb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There are still auto test failures in qtbase for WinRT.
Revert this change to unblock CI and investigate.
This reverts commit 2fb043eace.
Change-Id: I13cc618828f773750c031daaaffce777163f8b8d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We are using a statically built Qt because it eases deployment of
the built tests. As static linking is broken on MSVC 2017, 2015 is
used.
Change-Id: Iaf665f68ab705f44e93129ff6e25384ae4b5a319
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Do allow people to build from git using the Qt License Agreement 4.0.
The license agreement text is the same as in the installers, except
that some Unicode characters got normalized to their ASCII variants,
and things have been properly wrapped.
This follows qtbase change 60e56f1679d6.
Task-number: QTBUG-52222
Change-Id: Id00d026e47be3bfc488419652d9f53d72d56f0d0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Invoke-WebRequest uses TLS1.0 by default, which is not accepted by
Github anymore, causing all downloads from that site to fail. Upgrade to
1.2 to get downloads working again.
Change-Id: Ie242432937c273db5c345b38482dd74c19c3b4ca
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
Change will provision DirectX SDK with enabler DotNetFramework also, so
that configure for MinGW will detect ANGLE correctly. The DirectX
headers and libs will be in two location, while those are installed
with MSVC also.
Task-number: QTBUG-35288
Change-Id: I04ca71a73b22cd4eb27987a368cd9ede03b0e437
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
In order to create 32 bit Pyside wheels we have to be able to link
Pyside against 32 bit python. While 32 Qt build is done in 64 bit
Windows Pyside must follow.
Task-number: PYSIDE-646
Change-Id: I30855d4cecd6bc6219021216e9c296d28c56b405
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Includes provisioning scripts and modifications
to default.txt enabling the build. Builds are
disabled while fixing or blacklisting autotests.
Task-number: QTQAINFRA-1299
Task-number: QTQAINFRA-1300
Change-Id: I0fde33c8028c7ded9d07e8d9cb0dcfb03d5db188
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
It became obsolete when we switched to LGPL3, as discussed on the developer
mailing list in April 2017.
Change-Id: I67913f46c81730ffdc0f56163e854fd7043b2514
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Currently the proxy disabling script on 32-bit Windows breaks the
internet settings, preventing browser usage for example.
Change-Id: I77282f0d929a6223ceafd3b648d2e2a7b16186c9
Reviewed-by: Johanna Äijälä <johanna.aijala@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
A newer build of winrtrunner is needed. It is built from dev and
contains fixes related to handling of test output (most
importantly 044e9ad878ed1cf0ace0a9260b55cc94c71a294d).
To make the script more stable, the newer version of winrtrunner
was also copied to ci-files01, so that an alternative download
location can be offered.
Change-Id: I6a429aa3292266067756ce7ba3553088dc168197
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Previously all files got downloaded to a hardcoded path, including the
username for the CI machines. Usually, it does not fit the username of a
local development machine, complicating to reproduce bugs.
Introduce Get-(Default)DownloadLocation functions in helpers to
specify the default download location. This helps to run the
provisioning scripts on a local machine.
Change-Id: I761a92bf5e3e774358756a95dddb9a5d6ee54db9
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Open62541 is one of the supported OPC UA backends in the Qt OpcUa
module.
Change-Id: I9baaffbae058d0590819e248694ee41887558708
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Libclang is required for Pyside to compile, so dropping it totally would
block Pyside development.
Change-Id: I9c0deb3f0457f97bc4c36179971d49d58ca244a6
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Akseli Salovaara <akseli.salovaara@qt.io>
RHEL7 was introduced to replace RHEL6, we do build packages on RHEL7
already. The only coverage that it adds is an old gcc, but in the same
time it is quite expensive to maintain because of generally old
software stack.
Change-Id: I9955747efecefc3354aa9e1f1c45f7d1bc48dfc6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This is the qt5 part of the fix for the task. For the special version of
libclang we hacked together that allows static linkage, set an
environment variable that the mighty qdoc build system can utilize to
activate the release packaging specific linkage.
Change-Id: Ie340955214585329fe8fd3bc790e3cd6c6be42f9
Task-number: QTBUG-68178
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This restores the MinGW installation of libclang on Windows 7 and
installs the MSVC and MinGW builds in parallel on Windows 10. For
compatibility reasons the MSVC installation is done last, to ensure that
the older LLVM_INSTALL_DIR variable points to the MSVC installation. In
addition though we now get LLVM_INSTALL_DIR_MINGW and
LLVM_INSTALL_DIR_MSVC, which qt_find_clang.prf in qttools can use in the
future.
Task-number: QTBUG-66015
Change-Id: I8b53b85d0cde597c88a089f2a05f03947828d9bd
Reviewed-by: Simo Fält <simo.falt@qt.io>
A clean ubuntu 16.04 provisioning is required by RTA.
Task-number: QTQAINFRA-1640
Change-Id: I83f53c7b677da6d1aa0e89cc6bde0b2363a7ae1e
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
The builtin way of Windows for handling zip files is much slower than
using 7zip. A small benchmark (not representative, just extracting the
android ndk) showed 11 minutes using Extract-Zip vs 2,5 minutes using
Extract-7Zip on my machine.
Change-Id: I5198aabb5b75860ead687581fc5e368eb75e48ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
RTA needs this package for QNX testing.
Task-number: QTQAINFRA-1930
Change-Id: I3587558bc1c8ece6dbb29b5f5184f4bfa744a790
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
qtdeclarative was switched back to 913dc3f4f2be7c2c23237bcb9bffb3192cb10d60
due to sick coin integration.
Change-Id: I3defce1fb1f2ca86c85ada2605b351bf48668082
Reviewed-by: Liang Qi <liang.qi@qt.io>
The version also contains statically compiled libraries so we can
ship qdoc without shipping libclang.
The change temporarly removes CI qdoc builds from RHEL6 and MinGW,
these two configurations are not used for packaging, just for CI
testing. We should restore MinGW later.
Task-number: QTBUG-66015
Task-number: QTBUG-67764
Change-Id: Ie37b4be6a639e81d9ef0815682c6d60981cbeaae
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Fredrik de Vibe <fredrik.devibe@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Unity does not respect setGeometry() call, which is
violation of WM spec. During the years we have tried
various workarounds, but it has proved to be counterproductive.
This patch adjusts Unity theme to not draw window decorations,
ensuring that Unity treats the setGeometry() call the same way
all the other WMs and platforms we are testing on.
For more detailed explanation see QTBUG-67757.
Task-number: QTBUG-67757
Change-Id: I8d2bb9f2af14d3c184fc218ed08a1febd70f4026
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
This reverts commit 794913dde7,
which seems to break pyside builds. Instead we install python-pip
package from the EPEL repository.
Change-Id: Ic84680b0b0d6950d389bb42a6add18c83256f00f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Squish is needed by RTA which is not run during normal qt5 build. Other
words squish installation is not tested during integration. That's why
we need separate test for it.
This change will fetch test and run test suite which is made to check
that squish installation works
Task-number: QTQAINFRA-1733
Change-Id: I9284fd52d87767ae04022c3a6996e0bb972315dd
Reviewed-by: Johanna Äijälä <johanna.aijala@qt.io>
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Matti Paaso <matti.paaso@qt.io>
QNX 6.6.0 is required by RTA.
Task-number: QTQAINFRA-1914
Change-Id: Id0578050d24fb13f3e10a10e972be790d39f9bc0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
RTA needs debugging tools for Windows 10 x86 testing.
Change-Id: I69cae92a2529a933a018f22c1b200bdc4d2c0aa0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This tool is needed to clone some repositories correctly
Task-number: QTQAINFRA-1921
Change-Id: If4744304490649aeecf9daa0c1f840ded9b7beed
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
Redhat repositories includes needed wayland
libraries. Let's use those instead providing
those through provisioning.
Task-number: QTQAINFRA-1925
Change-Id: I543a6b9fb8876f64d4b9c17ef909b9c61129e62e
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
Latest pip version is not installed during python
installation. Pip need to be reinstalled after python
installation because older version of pip seems to cause
installation problems randomly at least with python 2.7
Task-number: QTQAINFRA-1902
Change-Id: If3d74130ecee6e410c64cad309feff9edc0e5db0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
The module has been dead for a while as well as the corresponding
service.
Change-Id: I40ce39f18d32be7ae22e944dcd181a7d7c0cfce5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Yum update doesn't only fetch the repository data. It also runs
a distro upgrade. So if something gets updated that isn't
compatible with us, it breaks. It also slows down the provisioning
a lot.
Change-Id: I27136bc572fbce5410b82ff9574cf85bf89e3100
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Qt Purchasing is supported on other platforms than Android, so
move qtandroidextras from depends to recommends instead.
Task-number: QTBUG-67318
Change-Id: I9c70574dd9b45579485b2640f7daeebdc6c2bc63
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Jom is required by RTA.
Task-number: QTQAINFRA-1895
Change-Id: Iec99a91d2a48c4c6ef49829e4f05baa90d1a96e0
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The goal is to run tests on the AVD eventually.
Change-Id: I7ac887661497b5169c154ef8b0264ef07749a36a
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The default style gives 1 KiB dots, 50 KiB per line, and the file is
567 MiB (~11600 lines). Reduce it to 1 MiB per dot and 32 MiB per line
(~18 lines).
Change-Id: Id181eee63313a4ad486af6c4752de0ed9ed5f7b6
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
System's default Python is 2.7.5 and doesn't come
with pip at all. To install its pip, it would require us to
enable the EPEL repository and install it from there.
The repos we use already include Python 2.7.13. If we install that
we get pip as well.
Change-Id: I083a970697a962ddb301616695c2cf419f1229f8
Reviewed-by: Simo Fält <simo.falt@qt.io>
This package is required by RTA.
Task-number: QTQAINFRA-1878
Change-Id: I0496445880f838de34ffd53f72fa05e0f0b0be58
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Also install Python 3 through system packages instead
of some weird scripts.
Change-Id: Ie22e126a422bd6efe9b3030d5044f4c196894ca8
Reviewed-by: Simo Fält <simo.falt@qt.io>
Python is required by RTA.
Task-number: QTQAINFRA-1870
Change-Id: If63218da138995580a3bed5ede8996d722fff48d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Windows machines currently reboot automatically in case of a blue
screen crash. This must be disabled to prevent problems with Coin.
Task-number: QTQAINFRA-1748
Change-Id: I64ac1cfa124694fab356b8443298c1b37bed9a92
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This reverts commit 2e329bc68e.
grub-update command isn't found, and after enforcing script
results, we have a P0 blocker here.
Change-Id: Iaf4b17a91cdc865974a5f4f196bbb80b085a39c2
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
(cherry picked from commit 677524620d)
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
We should first download from our local cache,
and if that doesn't work, fetch it online.
This commit doesn't fix it per se, but as we download
it from our local cache, the version is the one
our shasum checksum matches against.
Task-number: QTQAINFRA-1876
Change-Id: Ia7de54cf090af47ba33111911582f9d48c0ab2a2
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
This will remove the majority of our network traffic from the outbound
connection while provisioning. Also proxy was removed for
yum, as there is no point in proxying local data.
As a side effect, this makes provisioning currently faster by
reducing the time it takes by 35%.
Task-number: QTQAINFRA-1849
Change-Id: Ida4fb86d4bef166fc72e521e395d9753ec47a687
Reviewed-by: Timo Aarnipuro <timo.aarnipuro@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
There's no process called "adb.exe" - It's called "adb"
Change-Id: I3c23ede12a6d7fc7f3f33bbb806a84e8d9a2aaf4
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The script was over-engineered. The new version provides the same
functionality while removing uninteresting postmortem messages.
In addition try_catch.sh has a bug that injects set +e to a sourcing
script which was propagating through DownloadURL.sh to almost all
provisioning scripts. So it is good to avoid using it.
Change-Id: If191a0dcf52a29c4bec580a254e8e58a00130f6d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
On macOS the sha1 tool is named 'shasum' while on all other unix systems
it is called 'sha1sum'. In order to make all unix provisioning scripts
run on macOS without special case handling a symbolic link is created.
Change-Id: Ib1365cbb0dcb31e68a22959ce939fb450ec7e3f7
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
Use the same approach as in the other scripts.
Change-Id: Ie48103e2c4a528a9d29318c4cabd6ead71dc5c2c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Installing twice will fail when preventing the +e injection bug
when fixing the try-catch issue.
Change-Id: I26a1b9fa235c44fe933f2f29016a80f57d47ed49
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Currently Windows 8.1 platforms have been removed from CI. RTA
however still uses them for testing so we need to add the programs
that RTA uses.
Task-number: QTQAINFRA-1524
Change-Id: Ide9fa076dc965b16b96f610541ace6088543f795
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
mscorsvw.exe background processing is draining a lot of
CPU processing on Windows platforms. Executing the list
of to be processed items with full CPU capacity should
clear out the list and stop the background processing.
Task-number: QTQAINFRA-1775
Change-Id: Ib12bc10f4572390f20bfea915ca48ec398de46ee
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
RHEL does not use pkgconfig, nor does it use /usr/local/lib as default
library path. As a consequence, the config tests for qtopcua were not
able to find the open62541 build.
c3591fe77debc0eab79851bd8f0c050cd4f3f608 in qtopcua.git allows to
specify an environment variable to point to the correct location. Move
to /usr/local/lib/open62541/ on all platforms consistently.
Change-Id: I73c8076b70767553edfd793889150c584d5c33b5
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Akseli Salovaara <akseli.salovaara@qt.io>
The script was over-engineered. The new version provides the same
functionality while removing uninteresting postmortem messages.
In addition try_catch.sh has a bug that injects set +e So it is good
to avoid using it.
Change-Id: I9e26e8fedad71d40270fe94695d5e1c09c3d9023
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
We need to set LLVM_INSTALL_DIR to be able to build qdoc. That was
missing from windows7.
Task-number: QTBUG-65950
Change-Id: I7f75eb0181056a2117080ead6dc5862324906689
Reviewed-by: Simo Fält <simo.falt@qt.io>
On previous RHEL version the package was libusb1-devel. That package doesn't
seem to be there anymore, which presumably means why the package to install was
changed to libusb-devel. Unfortunately libusb-devel provides a compatibility
package for the old 0.1 API version and doesn't work with QDB. libusbx-devel
seems to be the new name for the 1.0 API version of libusb on RHEL.
Change-Id: I50a10bed0b73b536e5d591363f01d7cf6a3a69d7
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
While Coin should also see exit codes != 0 as error, we should
stick to one way of handling script errors. As Power Shell cmdlets
signal an error by throwing an exception we should do the same
(and that approach also works in Coin).
Additionally extracting 7zip files was unified across scripts by
using the existing helper function instead of reinventing the wheel
again and again.
A similar helper function was introduced for starting an external
application (and handling its errors).
Also echo and other "cmd" commands were replaced by their PowerShell
equivalents to have a unified approach across our Windows provisioning
scripts.
Change-Id: I70129ce38692f1396c33c13b33a2918485fa5271
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
So QtWayland will be built and included in the installer.
wayland-egl, however, will not be built, as that depends on support in mesa.
Task-number: QTBUG-66341
Change-Id: Id3f1825e00be9d278fce8ac2710a2640baafd332
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The standard mesa.spec file had sections for wayland-egl, which were ifdef'ed
out. The RPMs downloaded by this script have been built with these ifdef's
removed.
Task-number: QTBUG-66341
Change-Id: I43bcc67f5fd112e0837d45da7df20bcb63bfd989
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This removes various kinds of update notifiers that depend on aptd.
Also gets rid of the problem that aptd may hold apt lock files.
Task-number: QTQAINFRA-1755
Change-Id: I27dd6fef4720ef25a504d76a3da16d9bf45fb2f7
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Squish is required by RTA testing.
Task-number: QTQAINFRA-1732
Change-Id: I8ab0b11ccc299cc0b10e59f99d1cf27c0cdd48b9
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Update notifications need to be disabled to prevent popup messages
from stealing focus during testing.
Task-number: QTQAINFRA-1755
Change-Id: I202ffbee6420d2c9c167a97f02d5245145b618d0
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
RTA requires Squish for mingw53 on Windows 10 machines for testing.
Task-number: QTQAINFRA-1729
Change-Id: I42f2c6c62dd004ebc072835340ce24105cfac5e8
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Some Windows provisioning scripts use the Invoke-WebRequest without
setting the ProgressPreference = 'SilentlyContinue' variable for
disabling the download progress bar. Disabling the progress bar
greatly increases the download speed during provisioning.
Change-Id: I649c1bcc970577776d720a4ebf5a7af96c1603f8
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
otherwise abuse may go unnoticed (at this stage ...).
Change-Id: Ic8c2a843a941cdeb2d69542830eccf7fadcf252d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Release Test Automation tests are ran also in additional targets
compared to qt5 targets.
Change-Id: I72ca86f875920ec266e0e6b7ea3fee026eaa1cfe
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
Make sure we use some specific Python2 version on macOS instead of the
one pre-installed along with system.
Change-Id: Ifee07a8cf003e282ec3cb67535818f9fe39c8679
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
As agreed, this version will not be supported any longer.
Change-Id: I37d9d9d9e32b5d17dbf0f80a6c42a8e233bcc446
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The basic example will start using qtquickcontrols2, so recommend that.
Remove qtquickcontrols, as it wasn't used.
Change-Id: Ieaab1480e6a85ecaa24888fa58024d728d863a16
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Display sleep and system sleep need to be disabled to prevent the
machine from going to sleep during RTA testing.
Task-number: QTQAINFRA-1588
Change-Id: Idc91d77388ed9bc6df5f3c1aceca515f6308c618
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Display sleep and system sleep need to be disabled to prevent the
machine from going to sleep during RTA testing.
Task-number: QTQAINFRA-1588
Change-Id: I3dc1642d3714762bfb56963392d2bb5137c13256
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Grub timeout should be set to 0 so we save some time whenever the VMs
are booted.
Task-number: QTQAINFRA-1703
Change-Id: Ia866000703fdc083407d5d8588ba6680ffd80038
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Baloo file indexing sometimes takes up a great amount of CPU capacity
and should therefore be disabled.
Task-number: QTQAINFRA-1702
Change-Id: I549aef39c1dd2d2fa97196910f577153a42c4f54
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Decorations were previously disabled within the Wayland tests to work around
another issue. That issue has now been fixed, and decorations have been enabled
again, but these tests now became flaky when run within QEMU.
Task-number: QTBUG-66173
Change-Id: I23b722ebc0719a2fd359ba5c3c57c66a887c06de
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Grub timeout should be set to 0 so we save some time whenever the VMs
are booted.
Task-number: QTQAINFRA-1703
Change-Id: I67db00d200dc3e5f94ed205b53bb0ca6e70bdd8d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
NTP need to be disabled from all tier2 templates
Task-number: QTQAINFRA-1608
Change-Id: I89e019c23b7a194efffa011200a8c870e3a65d66
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Windows 7 x64 (Windows 7 msvc2013-x86_64) template
is needed since RTA is starting to deploy machines
from coin.
Task-number: QTQAINFRA-1521
Task-number: QTQAINFRA-1615
Change-Id: I7e9665bd37ee010a59ff3792f435d65eb9ad8c17
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Johanna Äijälä <johanna.aijala@qt.io>
Internal resources are preferred and should be used first.
Change-Id: Ifd2a54858c9fb6b82c3dc268566c67238aad262e
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Setting an environment variable has been centralized to a separate
script.
Change-Id: I027f9a71d32ee7f7d68575c9433f56a40a369deb
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
With the lsof we should see which process was holding the lock.
After that we can disable this source of problems.
Change-Id: Ie6a014bdb101e6230139569c0e4ea51a57089c30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The Qt Quick Controls (1) module, which was still listed as an essential
module, has not been actively developed for almost three years. Promote
Qt Quick Controls 2 as an essential module instead, and demote Qt Quick
Controls (1) as an addon.
Change-Id: If51c6c17d199ca10a574053d7dba67539a764aba
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This got merged accidentally.
This reverts commit 282899453d.
Change-Id: I1457513217e636aa54b43a1dc21b01443c798119
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This was pushed directly, bypassing codereview.qt-project.org to get
provisioning back into a working state.
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: I4eadb7ffafdf5cbc821d1f0a96734b0f83243464
This was pushed directly, bypassing codereview.qt-project.org to get
provisioning back into a working state.
Change-Id: Ia5d2e6f7079162f571cd7c7994c0f2b3133b1163
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Subscriptions need to be reattached when subscriptions have been
renewed by Red Hat.
Directly pushed to get provisioning into working shape.
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Change-Id: I6e469d7fac3b848193f280702e1e807ce4ea096b
Is needed for qtwebkit and qtwebengine testing and added in dev, where
MSVC2013 was removed to not add additional pressure on the CI.
Task-number: QTBUG-65830
Change-Id: I48d3a36a9f69f7345d3cf4dc5a652adb62bb461f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Squish is required by RTA for testing.
Task-number: QTQAINFRA-1523
Change-Id: I0c3653565f19cc9b798a0b63325c47b017cf5537
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Matti Paaso <matti.paaso@qt.io>
Common shared folder includes scripts of files which are common for all
operating system families. Changes under shared folder will trigger
provisioning for all platforms
Change-Id: I0789f87b76876d5f92673fe2f0e72d770e5f5ea4
Task-number: QTQAINFRA-1451
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Currently when adding an environment variable in provisioning we have
to check if the system is Ubuntu and use .profile instead of .bashrc.
This check should be done in a function so we don't have to duplicate
it for every provisioning script separately.
Change-Id: I2fa128032123e17d20dfb39cd3668e22e4bb0d55
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
This throw was placed on the echo line instead of the actual command.
Change-Id: I907c2ce17afa64c9c4ef628d766d7dfe270ade59
Reviewed-by: Konstantin Tokarev <annulen@yandex.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
On some machines the updates were already disabled, which lead
to the call to disable the service failing. Now we just move on without
error.
Change-Id: Ia48f7164c23dfe24e24548558d582cdc0190b7e3
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
We install the 64 bit version of np++ which is installed in the regular
program files folder.
Change-Id: I702210eaf7dfae75bbfcfd9cc98d8ed96d775f61
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Installing Update 5 for Visual Studio 2013 Update 5 (KB2829760)...
Removing C:\Windows\Temp\vs12-kb2829760.exe ...
Caught System.UnauthorizedAccessException
Access to the path 'C:\Windows\Temp\vs12-kb2829760.exe' is denied.
Change-Id: I9fe136f0361ee21e38563dd17bf76bf4fd53747f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Now debug symbols are added in qtlibs as well and library size
is huge. We need additional 'separate_debug_info' flag in
addition to this but currently there isn't support for it in
coin. That's why we need to revert this change until coin has
full support for this.
This reverts commit b0b6b05b34.
Change-Id: I7d36d2778433d2034420c209b73d21b5af32249f
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
As coin is running a 32 bit application the registry key ended
up in the Wow6432Node compatibility area of the registry when run
on a 64 bit Windows. Windows does not use this place to check
for the developer mode setting, so we use the "proper" registry
instead.
If adding the registry key fails the script now reflects that
and exits with a proper exit code.
Change-Id: Ifd6bc7e7b0ed6595a2a967597ab45053cb51e7aa
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
QNX 6.6 builds were removed. We need to check QNX in submodules
build.
This change amends 357de3ea13.
Change-Id: Ia04256bf35e45f111f73661c6f3ca445253900ec
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This change will split common folder to four different folders:
Linux, Unix, Windows and MacOS. Each of these folders includes scripts
which are common for their operating system familes
Task-number: QTQAINFRA-1451
Change-Id: Ic93b2183052335dee875d1452b21e38d268b6474
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This line is a leftover from RHEL script and needs to be removed on
Ubuntu.
Change-Id: I8fc8ab7cff808da997cb88a3cec4c65eaa1528a4
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Ubuntu uses .profile file instead of .bashrc. We need to use
the correct file accordingly.
Task-number: QTBUG-65594
(cherry picked from commit 22e4664eb0)
Change-Id: Iceeec53882f1a5c97cd8f7ea5b013d543c156acb
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
- Add missing 'Packaging' flag for linux and windows QNX builds
- Remove unnecessary 'Packaging' flag from mac QNX build
Change-Id: Ie4c49b9bd93f67f6a2dbbdece99da8c8f5fb3bef
Reviewed-by: Akseli Salovaara <akseli.salovaara@qt.io>
QNX 7.0 is required by RTA on Ubuntu.
Task-number: QTQAINFRA-1671
Change-Id: I82821e096cfa2d35a2176eba6e753a0d71049b72
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
QtWayland adapted to new api in qtbase.
This reverts commit eba433c126.
Task-number: QTBUG-65600
Change-Id: If46f054adfb8a2db0d82acbd07cb39b2f512530e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When CMake is installed it exports its install
path into .profile. However, freeopcua doesn't source
it as builds do, so it couldn't find the cmake.
Also, as Ubuntu is using .profile in our builds,
this commit fixes so that the PATH is actually written
into the right file.
Task-number: QTBUG-65594
Change-Id: I561a88a07872436bb4a3bd62a2d55fd56a130121
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
qtbase changed API, qssize_t was changed to qsizetype. In order for
qtwayland to update, qt5 needs to update first; but in order for
qt5 to update, qtwayland needs to compile.
Ignoring breaks cycle.
Task-number: QTBUG-65600
Change-Id: I978b0ed8dc86898ab1feb8b9cc47960e42095dfa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Liang Qi <liang.qi@qt.io>
CMake is missing from the clean installed Ubuntu 16.04.
Change-Id: I965bc3e55eb9b0765f483a84e5584e61054bdd80
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
In order to be able to run auto tests for UWP, developer mode has to be
enabled.
Change-Id: I4f20fb8d694d5148b7f976c1ef4bb23ff2fb57ba
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
...not just qt5. This will eliminate the semi-frequent integration
failures in qt5 submodules updates.
Change-Id: I99a4eb1cf41005adcfd12e385b663a5d8adbc628
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
SetEnvironment only applies changes to PATH for new processes. Currently
the provisioning runs the scripts in one process, hence changes are not
applied when they are already needed.
Change-Id: I82a360686651a57e5c94330a9b56671fca1493e5
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
pip is an unknown command in the sudo environment.
Change-Id: Ia59c0b98eac6c3d22b8a452988abe17df6a83909
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Commit fcc0feaacb forgot to
update the Tier1 image in qtbase.txt. It only updated
default.txt and qtdeclarative.txt. Most likely because
qtbase.txt was added after initial changes were made
and not caught in rebase.
Task-number: QTQAINFRA-1574
Change-Id: If5da006172037c27dec5b3ae0b14330bc6f0149f
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
This re-enables all platforms we should be testing on, after
having resolved the deadlock between qtbase and declarative.
This reverts commit 62efcd0c0a.
Change-Id: I2bcc34ad2d00036cc8ed37badbca67d4e68f5eac
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Currently we are using different styles and amount of digits for the
provisioning script prefixes. This change will unify them across the
platforms. Also removes a couple of duplicate files.
Task-number: QTQAINFRA-1668
Change-Id: I039777e7616bccc29c6a4ac55db13326ae8dc87c
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
Currently Ubuntu 16.04 template has stuff installed on its tier 1. We
want to have a clean installed tier 1 and install everything on it
during provisioning. This will save some disk space on our hosts.
Task-number: QTQAINFRA-1574
Change-Id: Ia7e6df62835a8e31943c00996f12ac70c6c71aed
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This is required to get a qt5.git update through, where we're having
a catch22 problem. Current qtbase in qt5.git gives compile errors on
some of the tested platforms, while qtdeclarative has test failures
due to (correct) changes in qtbase. So we can't merge the fix for
declarative without updating qt5.git, and we can't update qt5.git
without having that fix merged.
Change-Id: I87f79f6312a6ee2226aeb7b6868fd280ab087bcc
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
mqtt scripts need to be moved to Windows 8.1 directory from Windows 8.
Change-Id: Idc1b116f608e8cc8ae0a37713661d35b55b26a3a
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
5.10 -> dev merge switched from RHEL 7.2 to 7.4 and the open62541
provisioning script was left behind to the RHEL 7.2 provisioning
directory.
Task-number: QTQAINFRA-1666
Change-Id: I5c325dae63cb14a9935ddce5f3f751bd62df0ba2
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
We have to accept extra license to enable installing all required
packages.
Task-number: QTQAINFRA-1660
Change-Id: I9d014991be96ff0723688b317a645e281b3e92d0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
(cherry picked from commit 5df4ec2ec9)
We don't offer binaries for INTEGRITY, MSVC2013 32 bit or MSVC2017 32bit
so we don't need 'packaging' flag there either
Task-number: QTBUG-65324
Change-Id: If9e8fdebab44fcafde9b4da893be6f79f6287aac
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
We have to accept extra license to enable installing all required
packages.
Task-number: QTQAINFRA-1660
Change-Id: Ifae45ce36b5739cea5124eae04e08472ebe9414a
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
QtCanvas3D adapted to new internal api in qtdeclarative.
This reverts commit 146bda6468.
Task-number: QTBUG-64766
Change-Id: I709cb8856b674edc1a7d3217fdf68cbe8aca1608
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Need to be re-enabled when correct fix landed.
Task-number: QTQAINFRA-1660
Change-Id: Ifefb019016322ebf2e7c4ec9320e58555c6918e0
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Instead of using aptdcon, we can continue to use apt-get to install the
software. We just need to make sure that the automatic update and
package upgrade services are disabled. This is generally desirable as we
do not want these kind of activities to occur in the background while
building or running tests.
This also fixes the broken package installation via regex, which apt-get
supports but aptdcon does not.
Revert "Fix Ubuntu 16.04 random provisioning fail"
This reverts commit 537ea17d14.
Conflicts:
coin/provisioning/qtci-linux-Ubuntu-16.04-x86_64/002-apt.sh
Change-Id: I920e5132bb0a248d3794e1efcf01ce78d28e6ee3
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This way we have one build that compiles the "with cups" branch and others (the ubuntu ones) that compile the "without cups" code branch
Change-Id: I45ab3d72c34367789e0f344c917a88269883cffe
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add 'ForceDebugInfo' for RHEL 7.4 as well
Task-number: QTBUG-3934
Change-Id: I121c109f755c1b65bc0a59fc4edcb0a03f870d54
Reviewed-by: Akseli Salovaara <akseli.salovaara@qt.io>
Ruby is being installed twice on certain Windows platforms and the 32
bit versions of these don't have a working PATH addition.
Task-number: QTQAINFRA-1632
Change-Id: Id7fd269854d17c32df7d0b82ac9e750e645af564
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Gcc need to be downgraded from 6 to 5, because Gcc 6 is too new for
the latest Ubuntu LTS (16.04). This means Devtoolset-4 need to be used
instead of Devtoolset-6.
Task-number: QTBUG-64820
Change-Id: I2601aaaff5f3bbbadd867105fd4155239ab89825
Reviewed-by: Konstantin Tokarev <annulen@yandex.ru>
(cherry picked from commit adcdf7b49f)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Command line tools is needed by homebrew when installing p7zip
Task-number: QTBUG-64729
Change-Id: I2f9ce5a094ffe4d07e8bd138c0dcc150d0d916e0
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
(cherry picked from commit beb73056c3)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Needed by QtWebEngine
Change-Id: I66a737457cb9dd5f2cc53d64f639037926a560ca
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
(cherry-picked from 9a9d798ce4)
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The prefix numbers were missing for Ruby and QNX patch scripts.
Change-Id: I687b244c4657e17c32f0cc8221d3fb0ad3c5578d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Currently we are opening and closing a yum instance for every package
we install during provisioning. This is a bit inefficient so it's
better to install them in one go.
Task-number: QTQAINFRA-1586
Change-Id: Idbf814f9023da0fe8213b2ed84cd1a27a149fc27
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This script doesn't extract the dll to System32 on a x64 system.
Calling "sysnative" doesn't seem to work with the custom function being
used.
Change-Id: Iea734a400d8c095ea2e3fe54f38e4756fba406f9
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Signing tools are needed when signing offline installers
Change-Id: I98f12e3fdf01d273dff5fda0c2e34707174c6eae
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Many failures in qtbase on INTEGRITY happened recently.
Change-Id: Ic55259e694961a53199d30f095159728207f8824
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Because we had enabled this for qtdeclarative before.
Change-Id: I1efd438ebf51b2e632d3f8f39bd707e7eb5a282e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Command line tools is needed by homebrew when installing p7zip
Task-number: QTBUG-64729
Change-Id: Ia13838e3f5845351cb682c7d25127c8f36172d3b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
(cherry picked from commit beb73056c3)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Gcc need to be downgraded from 6 to 5, because Gcc 6 is too new for
the latest Ubuntu LTS (16.04). This means Devtoolset-4 need to be used
instead of Devtoolset-6.
Task-number: QTBUG-64820
Change-Id: I2601aaaff5f3bbbadd867105fd4155239ab89825
Reviewed-by: Konstantin Tokarev <annulen@yandex.ru>
bluez-libs-devel is needed to enable Qt Bluetooth
Task-number: QTBUG-64782
Change-Id: Ie668a44463307c7089bb96a087acab04c27dd3a0
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
bluez-libs-devel is needed to enable Qt Bluetooth
Task-number: QTBUG-64782
Change-Id: Ie668a44463307c7089bb96a087acab04c27dd3a0
(cherry picked from commit 9b722f9df91c4f7a6ca24d3ad18e68e3a76b137b)
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
It was given execute permissions when renamed recently; but the
bash-isms in it will only work with that if it uses bash.
Change-Id: I61468257210ba586fdaf1e79531bae0492f9e8ae
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Command line tools is needed by homebrew when installing p7zip
Task-number: QTBUG-64729
Change-Id: Ia13838e3f5845351cb682c7d25127c8f36172d3b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Python3 is currently not installed in RHEL7.4 provisioning.
Change-Id: I788b7f40ab7731f50f98f15defaac13f0296b54e
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Open62541 is a new backend added to the Qt OpcUA module. Furthermore,
this is going to be used as new test server to verify changes against.
Change-Id: Id08c91644f33734318925d84fb22b0d011604dd9
Reviewed-by: Frank Meerkoetter <frank.meerkoetter@basyskom.com>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
QtWebKit build targets are currently using the old non-vanilla template
for Windows 10 x64.
Change-Id: I67c536bc86939508cb8056ac3b7372096274fa69
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Expect is needed by Release Test Automation (RTA) to automate
configure testing.
Change-Id: I66889c70667a12f962cbea39906bd8b7a1d63517
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
We need to provision the FBX SDK for Qt3DStudio.
Task-number: QTQAINFRA-1449
Change-Id: I52587cd653b7954340d5f58978ffbd008330337c
Reviewed-by: Marianne Yrjänä <marianne.yrjana@qt.io>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Windows 10 x86 isn't yet vanilla so provisioning needs to remove old
cmake before installation
Change-Id: I2712aaa652492520d68a597d99a3c2d6bdbe2433
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
During CI, it has been observed that some processes didn't leave their
wait state. (So they were "hanging")
During analysis of the event log on that CI node, we found out that at the
same time those processes entered this state, the NTP client set a new time
and indeed the local time of the CI node changed (it was
changed 2 hours forward in our case).
For the record, the processes we observed this with was jom.exe and
cc1plus.exe (the latter is the g++ compiler in the mingw toolchain)).
We therefore have a strong suspicion that the NTP time change was causing
the CI hang, so we simply disable it.
The virtual machine should anyway get the correct time from its VM host
when its started.
Change-Id: I1204063399e2a4741b7b26b79858759c1bc5eab2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Install needed certificates and signing tools which are
needed when signing release packages
Change-Id: I21b9c3d1a6b4c83dec6b8ae1674def4ecc02f444
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Current version of Java isn't installing correctly during provisioning.
Silent installation needs parameters which are added to script. Without
those the installation process tries to open Java3BillDevices.jpg
unsuccessfully and the installation fails
Task-number: QTQAINFRA-1498
Task-number: QTQAINFRA-1394
Change-Id: I5672d230eb348186345887da81cdd97a4f59bce8
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Ubuntu 16.04 provisioning sometimes fails in the apt-get commands for
package installations. This is caused by a lock that is still in use
when the system is calling the apt-get commands.
This change will use the apt daemon to queue the install commands
and wait for the lock to release instead of checking once and then
failing if the lock is not open.
Task-number: QTQAINFRA-1502
Change-Id: Idd4aff42f99cf4d14c08aef8fcc3cb7dbc58b2dd
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
set -e won't work if logical OR is used after commands. These error
echo's need to be removed so that error catch will works. Also set -ex
added to print executed command when error caught.
Task-number: QTQAINFRA-1533
Change-Id: Ib4ea832a0ee813f99f59ebacad51ec57c3eff57d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
It was incorrectly created at ANDROID_SDK_ROOT,
but Coin doesn't use that env variable. It uses _HOME.
Change-Id: I64b8befd4341e917c7aa28586ac8bf1dbf4e23a4
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Provisioning scripts need to install Yocto toolchains (32 and 64 bit)
so that the artifacts aren't needed to be unzipped during Qt builds.
Task-number: QTQAINFRA-1454
Change-Id: Idceeabb7aa9ffe2555fb98c94916f8429c32af75
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
QtWebView is not used in QtNetworkAuth. There is no need to recommend
the QtWebView module.
Change-Id: I2dbb9d4024ada9436725f4dac643574b558fb9ae
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Currently for some reason there exist both "windows-8" and
"windows-8.1" folders in coin/provisioning/. "windows-8" folders
contain only the libclang provisioning scripts. These should be under
"windows-8.1" since "windows-8" shouldn't exist anymore.
Change-Id: I19ca70079c19cebd0482cf2d7502894648f19267
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
Subscription manager needs to be refreshed so that RedHat repositories
will stay available for provisioning scripts
Change-Id: Idebc994fbefde951000570f6690c6849abfd3666
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Subscription manager need's to be refreshed so that redhat repositories
will stay available for provisioning scripts
Change-Id: Ie93aef60cbd2bb851673b4e1cd8afb5f23b1395c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
We are switching to 64-bit MinGW targets in 5.11 branch.
Task-number: QTQAINFRA-1432
Change-Id: Ic806e0e6400ae98351a922ed7f5a545046273ada
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This one isn't needed as the vanilla OS already contains
the original file.
Change-Id: I210b62d4483ea78af7b5922c46f73e3ec6d44aeb
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
With Qt 5.9 series we still deliver binaries for QNX 6.6 only ->
- Add QNX 6.6 platform configurations for windows
- Remove 'packaging' flag from QNX 7.0 builds
- Add provisioning script to patch QNX in windows 10 as well
This change fixes the previous 5.6 merge, where this should've happened.
Change-Id: Icf080fa5614371627f8f5245675cb190ebaaf893
Reviewed-by: Simo Fält <simo.falt@qt.io>
Current tier 1 template #9 has python and anaconda installed that came
with MSVC2017. This messes with the provisioning scripts and ultimately
builds such as pyside, even though qt5 builds go through.
Task-number: QTQAINFRA-1503
Change-Id: Id4e1303ba2524373170f1aca7b0c7e66f9f235dc
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
QtWebEngine now depends hard on NSS as the OpenSSL backend never worked
well on Linux.
Change-Id: I4ea516bcb6fafdf6efd10493750da93b1961d965
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Added all the provisioning scripts that install required
programs and make changes to certain settings. These are needed to
build qt5.
This commit replaces RHEL 7.2 in desktop builds, android builds
and INTEGRITY builds.
Task-number: QTQAINFRA-1251
Task-number: QTQAINFRA-1252
Task-number: QTQAINFRA-1253
Task-number: QTQAINFRA-1267
Task-number: QTQAINFRA-1269
Change-Id: Icef19df7fb799a4008ccdc0584821c982055e339
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
7zip is nice to have in path for future purposes such as when
cherry-picking to other branches where we use different
extracts scripts.
Change-Id: I40b0f8568e285d85927ad30365c0ab9224e21332
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Changed the helper function for extracting 7z files so that it also
supports the new C:\Utils\sevenzip location.
Change-Id: I4f2dafc4ccac71e2cd8a3c8148df4888f800484f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
We should use this helper function now that we have it.
Change-Id: I9a522533795d4d4e63f608a0624378f066055b10
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Added all the provisioning scripts that install required
programs and make changes to certain settings. These are needed to
build qt5. This replaces the old Windows 10 template.
Task-number: QTQAINFRA-1263
Change-Id: I0f3d1072d53eb75f7405cf79139f2919eeb1f716
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Up to now we were always matching host architecture for
clang version to install. It is not good enough as in
some cases (all?) we build qdoc, which depends on clang,
as 32 bit app, that can not link to 64 bit clang.
Change-Id: I7b635f38821533da32d721e5e55f0067d4d0f62e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
In case DownloadURL failed it's shasum check, it printed an error
and threw an exit 1. This exit 1 was never handled in the calling
scripts and went ignored. It was also not passed forward as
it was inside a try-catch statement.
Change-Id: Iae4fd6aefb75c07623ec86dc570f0a46fec659b4
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
MinGW currently uses only internal URL without backup. Added the
official URL to these scripts with SHA1 checksum verification.
Change-Id: Id9b8a1bf1110201414e9d79c9e713475118ff661
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Those are required to build Pyside#5.9 branch.
Change-Id: I315c72155815d8b6b0b2c5eee4d3922374262c7a
Reviewed-by: Dominik Holland <dominik.holland@pelagicore.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This changes swap packaging and iOS builds
from 10.10 to 10.12
Task-number: QTQAINFRA-1095
Change-Id: I681c0abc29bfeb240dd61f8a95c811d353979013
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
MQTT_TEST_BROKER_LOCATION needs to be prepended to .bashrc to avoid not
being evaluated. Furthermore, a previous installation might need to be
removed.
Change-Id: I9edaeb13378aa262b453f816260ade01ba414961
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
42b502f is not needed for branches >= 5.8, configure.exe does not
exist anymore.
30660bf was not applied to 5.9 branch, the scripts were not
adapted to new template.
Conflicts:
coin/platform_configs/default.txt
coin/platform_configs/qt5.txt
Change-Id: Ie3681d5f641e99a074368f21b7f85fe31beacc17
Get rid of COIN_WEBSERVER_ADDRESS and download the QNX C++11 patches
from ci-files01 instead.
Change-Id: I7c32bfc1e1abef59b1e419e7dcdb73a5b16a895f
Reviewed-by: Simo Fält <simo.falt@qt.io>
The move was forgotten in commit
dd3d32d13c that merged the 42.1 to 42.3
switch from the 5.9 branch.
Change-Id: If76ac7b54187cfb29dafeaccbd3cd56e3e01deab
Reviewed-by: Dominik Holland <dominik.holland@pelagicore.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Remove old android installation and make sure new 'clean' android
folder is created.
Change-Id: I4c561797791e08976b07a194c2c9ed2f5aa302bb
Reviewed-by: Simo Fält <simo.falt@qt.io>
MQTT provisioning happened concurrently with an OpenSUSE update.
Change-Id: I23a8b632ff82e3900931b58d3d06b9f37bda5998
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Changes the mingw from 4.9 to 5.3.
Task-number: QTQAINFRA-1208
Change-Id: I360b9806c35e597a4b9fd0d57c10eebfb8643905
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
MinGW is an alternative option for Visual Studio. It's
used to create desktop builds and for cross compiling
Android and QNX. At this point it is still unclear which
version is going to be used for what, but as both are
supported, let's think ahead and provide them both.
This also allows us to debug with the other, if the
other is causing problems.
Task-number: QTQAINFRA-1289
Change-Id: I2a922669c07d49370e608c093be80481c8613dc7
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
By launching an installer with Start-Process and -Wait,
we make sure no handles are left holding on to the
installer when we try to delete it at cleanup.
Change-Id: Ic9b700ea1ce9e70089ba4cb7e91d9765ca976333
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
With this change we get coverage for namespace related build breakages
in examples of Linux-only modules, such as wayland.
Change-Id: Id9464140059c459a19ce702d6b21a552f8137a2c
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This forward-ports commit a99d3432f7
to 5.9, which should have been done in
6bf5691ca8 but accidentally left out.
It reuses parts of commit a5f3f8ed48
that was initially cherry-picked to 5.6.
Task-number: QTAUTO-345
Task-number: QTBUG-63133
Change-Id: Ib401dd06bfc4d4aaf8b8ce1a8509697993d4397e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The paho broker is used for testing the Qt Mqtt module, specifically the
client classes.
Change-Id: I252a337eb0454e871669a467dba2d9a379fb33d5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Commit c48355ebb5 changed
the path of shasum, which was not intended. While the
DownloadURL.sh utility is used by rhel in addition to
macOS we can't rely on /usr/bin/shasum but we have to
use the one found from PATH.
Change-Id: I67bb37dcb72ba3d8d1f279646e44228b27137ec9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
MacOS 10.10 has older shasum tool, which does not support oneliner
verification.
Change-Id: If00b846d5772aa1991960675d022249d63e7bd77
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It seems that macOS 10.10 has a non standard mktemp command. It doesn't
work as expected but prints usage and exit instead.
Change-Id: I37be6eb01474466c2b6bbae4f38876673bd9c295
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This function was broken and only added the latest addition to the
actual PATH.
Change-Id: Ida352c7b605c1b9748bb98e4f51ce68a765c3ce3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
From Qt 5.6.3 onwards building QtWebEngine Windows 32bit binaries
requires Windows 64bit machine. Linking requires more RAM than
Windows 32bit can address. Change MSVC2013 & MSVC2015
integration host machines accordingly.
Change-Id: I5b88536507dcf59efd124d4e8c3ead79772021fb
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
We used to solve the requirement for uploading configure.exe from
product version, but we can add this as a feature and remove the
dependency to product version.
Change-Id: If671e7193771453cd5cd41e881875c44ff0992fb
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
apt explicitly warns that it doesn't have a stable UI, so it shouldn't
be used in scripts. This should have no implications in practice.
Change-Id: Id0bb0d44e73b80a19f6ba4ca1aa4d92c09d10a92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
If we, in a provisioning script, add $PATH to another
file, that $PATH gets expanded there and now. We need it
written as $PATH to the target file, so that it gets expanded
when the other file is run. Not at the moment of running this
provisioning script.
Change-Id: Ie2c64764f9e0a676307cb3a144162cbc35eb33fb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Replaces existing Windows 8 x86 builds with
a vanilla tier 1 image that gets all needed
software provisioned except for VS2013 that is
pre-installed.
Also modifies existing provisioning scripts
under common to support this 32bit OS.
Task-number: QTQAINFRA-1383
Change-Id: I495cb2d78b4d2d8b2abb9af1254fff0a78a570d9
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Fixed ICU script to actually install ICU instead of just setting the
environment variables. It is required to build qtwebkit.
Change-Id: I8881f9c11599d99b4d400595c9b929cf6f37088a
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Added all the provisioning scripts that install required
programs and make changes to certain settings. These are needed to
build qt5. This replaces the old Windows 10 template.
Task-number: QTQAINFRA-1263
Change-Id: Ieeb2ae3c53841644996d99ca86228df6f825a63a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Python3 is required in 5.6 by pyside-setup.
Task-number: QTAUTO-345
Change-Id: If11ca425fa08cce8a518710ded0a6ec58159343d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
(cherry picked from commit a5f3f8ed48)
(cherry picked from commit a765838889)
(cherry picked from commit 1859f9b26c)
Currently the path addition command will forget the previous addition
when adding a new string. This hasn't been found out because python
was the only script using this command. Now we also need to set the
path for ruby, so the python string is left out.
Change-Id: I39721d78111550189e52a9f095030033f9660c0a
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Add version printing and move version strings to variables for
easier reuse.
Change-Id: I5372872bf455609dfb7cc7bbcf7a110cd71933fb
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
If we, in a provisioning script, add $PATH to another
file, that $PATH gets expanded there and now. We need it
written as $PATH to the target file, so that it gets expanded
when the other file is run. Not at the moment of running this
provisioning script.
Change-Id: Id963f0f8b1cc74b02d35c1a91eb974ed816839ab
Reviewed-by: Simo Fält <simo.falt@qt.io>
The merge commit 74eb853384 accidentally
brought forward the removal of files from commit
49ccf716dc that were not supposed to
propagate.
Change-Id: Ia5d6b2205c75f0856c3fed104149980c75a55840
Reviewed-by: Dominik Holland <dominik.holland@pelagicore.com>
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
It is needed for QDoc.
Task-number: QTBUG-62532
Change-Id: Icfc7d0af8a90cf827f4d6468e95f5aa002872102
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Amends 7456e028a7 and therefore allows
the re-use of the boot2qt build artifacts.
Change-Id: I4b01bf13e0004c4c3c3a2be00b02760e0ad3ffdd
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Previously when a VM user tried to attach lldb to a process via ssh,
lldb would fail with the following error message:
"error: process exited with status -1 (unable to attach)". If this
were done over VNC rather than ssh, the user would instead get a UI
popup to enter a password to allow debugging the process.
When trying to debug an application using Xcode for the first time,
Xcode will offer to enable the so called "Developer Mode" which allows
attaching a debugger without specifying a password every time.
This change enables "Developer Mode", so that every VM user doesn't
have to.
Change-Id: Ie4e473a982c908afd456ac1773bbdaf4ce778094
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Libs and llvm-config is required by pyside. In order to extract
libclang package, we need to install 7zip. 7zip is installed
with homebrew.
Change-Id: I35367dca1f79dbc9e2f1513480f6fc9bb69730d3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Move the Documentation feature to the corresponding Ubuntu 16.04, where
the CI would have used it by magic.
Conflicts:
coin/platform_configs/default.txt
coin/platform_configs/qt5.txt
Done-with: Frederik Gladhorn<frederik.gladhorn@qt.io>
Change-Id: I885ce572710480cd15ecdc8cfac7edb52957f92a
QDB has to change to using Windows 10 for releases, because Windows 8.1
is no longer available for non-qt5 builds as a packaging platform in 5.9
branch.
Don't provision libusb on earlier Windows versions, since they don't
have a compatible compiler.
Change-Id: I771a24fcf208c4961483a39e51cb7d95f004ed55
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Previously font configuration files were used from the host system.
Updating the toolchain to Morty introduces Cantarell font which
causes toolchain fonts to be used by Qemu. This change forces
also the actual font files to be used from the host system
regardless of what is in the toolchain.
Task-number: QTBUG-62528
Change-Id: I00de0baa952c9b898edc6b9da8d1d8814f6c722b
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Ubuntu 14.04 and OS X 10.8 are no longer relevant
Change-Id: Ib18dda605501fbbf2a6cac578a1b34d82102fae4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The script will install custom package, which is known
to match with pyside requirements.
Change-Id: I28ff7877ef1bba50f8d32007af87e70c0ddc398a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Installing the NDK and SDK takes a lot of time and finding potential
other problems require us to first download the entire Android SDK.
By moving it back in line, we first make sure the other stuff work
before taking care of this.
Change-Id: Ibae82dca247c8ae063548dbafa5a348102bf8ddb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Python virtualenv command is used when building pyside modules,
which installs additional Python modules during build time
and requires access to installation directories.
Change-Id: Id34ac8b36710ba04d8db263acdaf2bd31e314de8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use an unreleased version that does not have a crash on Windows 7, since
there is not yet an official release that would include the fix.
Task-number: QTBUG-62430
Change-Id: I14d83d01fe3d4b0bfebe7514fbec7d25e99af731
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This change will disable system updates from App Store to prevent
unnecessary network load
Change-Id: I7915ec6ffce681a850abef59d58f953effd6deb0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Added all the provisioning scripts that install required
programs and make changes to certain settings. These are needed to
build qt5. This replaces the old Windows 8 template.
Made all the Windows platforms use the scripts under
provisioning/common/ instead of duplicate files.
Task-number: QTQAINFRA-1357
Change-Id: Ic3f0b50079b212437fff711379f243753ab84872
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
RHEL 7.2, Ubuntu 15.04, 16.04 and OpenSuSE 42.1 are not used in the Qt
5.6 branch. Let's remove the scripts to avoid confusion.
Change-Id: I3829ea320ad77ebd25c9cf5bebfeed89f37f44dc
Reviewed-by: Simo Fält <simo.falt@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When creating packages, we build the docs on one configuration.
Previously that was done by magic inside the continuous integration
system. Make it a bit less magic by having a flag for it.
Change-Id: Iee5be7037023929b319beffaacb1592dc87d6078
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This change will make the pure C++ libs of Qt3D be built even if
qtdeclarative is skipped.
Task-number: QTBUG-62256
Change-Id: I0cdf19a57d1d8eca065e19a21e88193c5dcb5eb6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reason being that it's much easier to trigger compile errors with the
QNX6.6 toolchain than with the newer QNX7, so these show up at once
and not only at qt5.git integration.
Task-number: QTBUG-62047
Change-Id: Ib45728c92488206dbede019e4583bc9a5386b90f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
And also moved to Ubuntu 16.04 as we're not testing 14 anymore.
Change-Id: I3fd12a1ff290e564f15a557da33ce3c0008b4f81
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When committing a change, the automatically generated git commit message
consists of
1) The content of .commit-template
2) Informative text for the current commit, generated by git.
While 2) always has LF line endings, even on Windows, 1) might have CRLF
line endings if core.autocrlf=true. The result is a text with mixed line
endings. With the default editor vim, every line of the commit template
part ends with ^M.
Fix this by forcing the line endings of .commit-template to be LF
regardless of core.autocrlf.
Change-Id: I6db825695466d7f48f1fa4f771d83fb872fdb576
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Conflicts:
coin/platform_configs/default.txt
This also reverts c9d5341307 as on macOS
10.11 in 5.9 we're using a fresh virtual machine template that doesn't
have stale virtualenv/python installations.
Change-Id: Iab50fde0388c97967ada7c40374345ce4327613a
There are multiple Python installations in our macOS 10.11 Tier1
template. Most of them are pretty old and not even working properly.
One of the affected Python tool is virtualenv, which atm is creating
Python 2.6 env by default even if Python 2.7 is the default Python.
Change-Id: I8bc0900976a9dc79637539802345175c85b7b433
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The system packages in the base template were
updated via apt-get on 12.07.2017.
We hoped that it will solve mysterious problem of
a network interface being randomly disabled. Sadly
we had no luck, but getting all security updates
also make sense.
Change-Id: I34d7a56a2c5530376f74bb35faf461e2e18da14a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The system packages in the base template were
updated via apt-get on 12.07.2017.
We hoped that it will solve mysterious problem of
a network interface being randomly disabled. Sadly
we had no luck, but getting all security updates
also make sense.
Change-Id: Id11eead39cf1c8a04c054c19b323f752e797fd12
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It appears tests compiled with MSVC2013/64bit are prone to
crashes. Keep only a developer build/compile test in default.txt
and move the packacking builds to qt5.txt with tests disabled.
Enable testing with MSVC2017 builds in qt5.txt.
Task-number: QTBUG-58654
Task-number: QTBUG-50835
Change-Id: I6061fe3a585c4bb94100d73d04434aca42c82608
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
MinGW packages will be upgraded in another patch.
Task-number: QTBUG-61728
Change-Id: Ie6a1996b7850282a7cdcbe5ceba61f1ce473cf69
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Also upgrade to Conan 0.24.0.
Task-number: QTBUG-61829
Change-Id: Ia01609e5f2d8121eb216b03bc8e95bca7225042e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We need to use x86 packages from qtci-windows-10-x86_64 configuration,
so splitting Conan manifests by configuration is not a good idea anymore.
Task-number: QTBUG-61829
Change-Id: I8b2fc00865cce372ca6b5ec75b4775d345d0d18f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some of the macOS templates are cleaner than others and are mising some
basic tools like 7z. Homebrew provides easy way to install wide range of
tools via command line.
Change-Id: I5a8528bb4a13ef9a72e2467c51a8b5d45f9a3d84
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
PySide versions following 5.6 use a C++ parser based on Clang.
The Clang library (C-bindings), version 3.9 or higher is
required for building.
Change-Id: Ia7bcad46e3214d6d8b688354c9abdc83a513573c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Makefile-based generators of CMake are much less efficient than Ninja. They
generate bloated Makefiles that call back to cmake often. Main offender on
Windows is cmake_depends command which seems to do lots of disk reads.
QtWebKit can now switch to ninja automatically if it's present in PATH.
This should help to reduce build times.
Change-Id: I33d3f4d766a630f8ca4fb64b719fe2e8a5c2e00c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is a dependency of the python3 packages for windows
Change-Id: I6f45dcb1d64f43dedd883d33fdc85038c24fc501
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Manually bump declarative include a sha1 that'll unbreak the build.
Also bump qtbase to latest 5.9.1 to include the blacklisting of
tst_qudpsocket::linkLocalIPv6.
Change-Id: If5739bc170bc7f2e45d8c5e785bcad6eb15fddcd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Install the DLL for general availability on all Windows systems. Due to
its distinct name it will not be picked up by anyone unless Qt
explicitly selects it.
This gives us the ability to choose the GLES backend to use in Qt.
Change-Id: Ie36f202ead7080a8f7690734d305bd27f0c9f56b
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Qt WebEngine does not build with MSVC 2013 anymore, hence the examples
from this module weren't tested at all.
The 2015 configuration also places the Qt symbols in a namespace, so
this adds additional coverage.
Change-Id: I395866e8435fbcba33a1b3b4a4a5ccfe82ebad15
Task-number: QTQAINFRA-1271
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
MinGW is very sensitive to inlining / export errors, so having a
developer build check is valuable. Add a MinGW developer build
executing tests to increase coverage and turn off testing for the
packaging build in return.
Change-Id: Ia4bdacc9952c7a568ac9d4105818eb926c88e6ca
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
winrtrunner is needed for running auto tests on winrt. As the tool
resides in qttools and not qtbase and it not changed often, it was
decided to handle it similar to jom and see it as an external tool.
Change-Id: I9636962df51f98bef6aad3e340c565f50e393949
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The correct paths to the headers are
c:\utils\postgresql[x86]\pgsql\include
not
c:\utils\postgresql[x86]\pgsql\pgsql\include
Same for libs.
Regression introduced by commit ce47238ed9
but only noticed in the 5.9 branch.
Change-Id: Ib16072c0cc1c52f743f5500bc9732c8b04e962c7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
We can't get those to work with the faster KVM based VMs, so disable
these builds for the time being.
Task-number: QTQAINFRA-1208
Change-Id: I74c19374d57e3f84d8f982b95aade4a779623228
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
We cannot run graphical tests reliably on 10.10 anymore with the new
virtualization without vmware. As outlined in the referenced task, we
occasionally get the Window Server locking up. So for the time being,
this change disables testing on 10.10.
Task-number: QTQAINFRA-1198
Change-Id: I020d4a298562554838cd7e898df52438db536d7a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
* There's no need to have a numbered prefix in the common directory
* Instead of deleting directories trees worth several gigabytes of data,
just rename the directory. The underlying storage system is
copy-on-write and so deleting the files produces more data than just
moving the directory out of the way. Deleting the files does not
actually free up any physical disk space.
Change-Id: I6de02d56f3485651726ea11183ce7571d5b61520
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
We're better off copying off the internal server using CIFS than using
PowerShell's incredibly slow Invoke-WebRequest.
Change-Id: Ic39cf08be70335e9309575d543155bffaceb0db0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
We have a prepared package on the internal server that has everything
necessary included. This way we do not have to download the actual
update content from the internet.
Change-Id: Ie4cb3116a4f91a47df5be1c2b2e473d7ddec9a78
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
Similar to the mysql change (parent commit) it's faster to rename any
older artifacts and install only what we need. This also generalizes the
zip archive extraction code for "dev" packages.
Change-Id: I3ad1f23efaed80fab3e0778a3e8c46317138f1ad
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
* Instead of deleting the files from a previous installation, which will
not actually release any disk space but just make the qcow2 file
larger, let's just rename the directory the old files are in.
That is a significantly faster operation.
* When extracting the zip archive, only extract what we need for Qt:
Libraries, binaries and headers. We can skip the installation of
several thousand documentation files for example, which takes a long
time.
* Instead of downloading the zip archive via PowerShell's
Invoke-WebRequest we can get the data much faster using CopyItem off
the CIFS share. As a bonus this is also more robust against download
failures.
Change-Id: I9128bd70e5f4a4ebcdbf046765e76b63bad033a5
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Changing MSVC 2015 integration host from 32 bit to 64 bit machine
enables CI for QtWebEngine 32 bit Windows builds.
Change-Id: I3d30df90fa7d92c603a2e91dd528d817e682c214
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
the handling of -skip happens outside the usual argument handling, so we
need to handle -redo manually as well.
Change-Id: I7dcdf729bd9db2ff2ac8dc08bac71462bf30814b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
All 2017 configurations are added to qt5.txt for now.
Change-Id: I4745c61a99891e2fc6d8b381b4aa831150fb4596
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
This further helps with the shared library coverage on iOS-like
platforms as iOS and tvOS are nearly identical, until such time iOS can
be moved to shared libraries for official releases as well.
Change-Id: I7dbc448890759a4e49a242d4c5bcb00f6c673f4e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This was unintentionally added, and helps with the shared library
coverage on iOS-like platforms until such time iOS and tvOS can be moved
to shared libraries for official releases as well.
Change-Id: Iabae0503a0ce3fe538b97fc1941a1ccf19024429
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This commit removes OS X 10.10 as a developer build
target, and enables autotests on osx 10.11 developer build.
Task-number: QTQAINFRA-1090
Change-Id: I0ba0a60edd7010eedd3289c400266b4cced6c133
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Previously provisioning disabled screensaver on startup
but didn't affect current session. Thus the screensaver
hits the VMs while provisioning and without this commit
the screen gets locked. This prevents the lock and
we get to the desktop on the VMs.
Change-Id: Icd783127e898ece6bebb5598ab86f12d5062eeb5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
only examples use webp from qtimageformats.
Change-Id: I6fb0f21800761b9ddaaf55e250cdd8926800aac7
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
qttools manually updated to include compile fix.
Change-Id: I4cee5023ab7c33f96ff509500b1b9db53daeaee6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
MSVC 2017 and Build Tools updated to version 15.1. Also missing
component 'Visual C++ compilers and libraries for ARM' installed
for winrt arm
Also script added to storage msvc version numbers to versions.txt
Change-Id: I015e15d5d613b178c1266a2aecee5c3270780486
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use the latest windows 10 template, not something outdated.
Amends e3e30b4a2b with the tier1 update
from commit 070d9333a6.
Change-Id: I92bae3d971e8ad7190d883a057968a6583d34ff7
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
MSVC 2017 is pre-provisioned to tier 1 template with MSVC 2017 build
tools. When winrt arm is available for msvc 2017 in qtbase it will
be added to platform configurations also
Change-Id: Ib33cd63a974683de080bf5734081a73ecb1dabeb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
After enabling QNX 7, we are moving some QNX 6.6 config
to be ran with qt5 integration only.
Task-number: QTQAINFRA-1111
Change-Id: I230b5f8b8631558ccfa156ae4f949ed045c40972
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
If normal fontconfig paths are used, qemu parses what ever files it finds from
the toolchain sysroot and the rest from the system fonts. Fix by copying the
system font configurations to a location which prefix that can't be found from
the toolchain sysroot. Links must also be dereferenced or their targets remain
pointing to the toolchain sysroot.
Task-number: QTBUG-59966
Change-Id: I9710c9fdebe81114080f47f1f59b2a049f87c070
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Default shell for 'qt' user is Dash. It doesn't read .bashrc
at all. Coin uses bash, but uses it non-interactively which
in .bashrc means that it bails out immediately. So same result,
.bashrc isn't read in Ubuntus.
Change-Id: Id466c86f8cc813aacd5f41c4b267b44e93759377
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Assuming that the JDK dmg will always be mounted via /dev/disk1s1 breaks
when another disk is present in the system and the DMG ends up at disk2
for example.
Change-Id: Ia196a6ae18f455144802167c0887bf18dafbc101
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
* Remove unused installation on macOS 10.10 as we only build packages
on 10.11.
* Replace the use of the ~1GB downloads of the zip files with a direct
extraction via NFS. This is more resilient to flakyness in the network
connection.
Change-Id: I1bfe5bbf00a6614233b517801daf130069094ec9
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
MSVC 2017 build tools are pre-provisioned to windows 10 templates
Change-Id: I98d857101ad209acd6eea9f821e367e514359d8c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
changed submodule sha1s should not prevent updating.
Change-Id: Ibd4480bed91de2a04719c32c95a4c603eda4c44b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of downloading a 4+GB archive and uncompressing it in /tmp,
let's uncompress the archive via NFS and feed the data straight into
cpio. This should be faster and avoids curl's error handling that's
happy to abort instead of re-trying.
Change-Id: Ifa5d842c50111ccdbd56e795b270ee6433a63adf
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Provision the INTEGRITY SDK and enable the builds
for Qt5 builds.
Task-number: QTBUG-59076
Task-number: QTBUG-59077
Change-Id: I448a16e45312b88eb5f710a600956c076480e253
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
These tier 1 templates includes changes needed by 5.9, but we can use
these same tier 1 templates for 5.6 also
Change-Id: I3ad0d75ab89f7b6502b758fb94f984cc6e0b7f16
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The script neglected the result of the sha1 after download.
Even with a failure it exited nicely.
Change-Id: I6c0e25c2b764a0ad54acbe317eddf395a56d7f1c
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
As autotests pass, we can also move all existing
Ubuntu 14.04 configurations to run on a more recent
Ubuntu 16.04.
Task-number: QTQAINFRA-1101
Change-Id: I99c4f674dc48521c66ac579c6bb1b5396c282131
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simo Fält <simo.falt@qt.io>
Conflicts:
.gitmodules
qt.pro
Commit ed8f84f149 (webengine needs tools)
together with commit 5656b4848e (webkit
needs webengine) creates a circular dependency with qttools also
depending on webkit. So this commit breaks it by swapping the
serialization order between webkit and webengine.
Change-Id: I36309908adb754072495e02785ad158f8b389548
linking both at the same time requires more than my 16GB of RAM, so
introduce a .gitmodules field which serializes the two.
in practice, it is just interpreted as an optional dependency. the CI
system won't be taught about it, so this will not cause an unnecessary
serialization there.
Change-Id: I938537ebd3767a1184a5a31c4c026c70a05d499a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Commit 8b13ccf0238aecfe2a01e3a2e6d90620a8b9e516 in coin attempted to
incrementally add OpenSuSE 42.1 support module by module, and various
transitions have lead to this file. Meanwhile commit
aa7531ca7d0e8f92c49a54f11460ece647ef73f1 in coin replaced OpenSuSE 13.01
globally with 42.1 for all modules, so this separate treatment is not
needed anymore.
Change-Id: I0e162a64816f7925a5afd5a79614a1e8843d9b7e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
after 8c0390143, we cannot rely on the denormalized segment starting
with a slash any more.
Task-number: QTBUG-59753
Change-Id: Ia3a3c005d1f41320747a60efc48a180caa88206b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Valentin Fokin <fokinv@inf.u-szeged.hu>
The module has been changed to run a sub-set of tests. With that in
place we can enable test execution, providing us with some CI test
coverage for the ARM JIT, for example.
Change-Id: I5b0ad68fcd4fa8fb73f59432b42ccdd9a5b6fd59
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
First test using QFont fails if fonts-noto-cjk is installed. This
happens because running fontcache for that font takes > 5 mins when
run on QEMU. Running fc-cache doesn't help since host version creates
cache for a wrong architecture and running armv7 fc-cache segfaults
on QEMU.
Change-Id: I6667b29ad4c4cae8d242e3af63defb603a6e6ec7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
coin/platform_configs/default.txt
coin/platform_configs/qt5.txt
This also fixes the 7Z extraction code to work on the windows 7 x86
installation where 7z is not in the PATH anymore with revision 2. The
fallback code was 64-bit only and needs the null check for ProgramFiles(x86)
along with the fall back to ProgramFiles to locate the 7z executable.
Change-Id: Ifcf014c3a99685c427a62898e1fa83910a4a7247
When provisioning windows machine, it seems that detecting architecture
by checking [System.Environment]::Is64BitProcess doesn't work properly.
Instead pass 32 or 64 as an argument when calling powershell script.
Change-Id: I890ad141b8ef194275848d0e656431753463cd2b
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Visual Studios will be pre-provisioned to tier1/vanilla os when visual
studio update is needed. Even if using pre-configured offline
installer with specific workload and components the installation is
still taking too long. This way we'll reduce provisioning time
significantly
Change-Id: I1f831aef648716dc640ce9cbfb4e63aa54e7afd0
Reviewed-by: Akseli Salovaara <akseli.salovaara@qt.io>
This is needed to cross-build to 32bit x86 which WebEngine needs for
Boot2Qt ARM builds.
Task-number: QTBUG-59504
Change-Id: I9851d97949dc67c6f564cf09443b0a04998b2590
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Qt should not require command line tools to be installed.
When they are installed, we can accidentally rely on
on the tools instead of sysroot.
Task-number: QTBUG-58325
Change-Id: I9ad942c6f67e4c1b7348258a9178ab497ee58800
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The MapViewer example now uses qtquickcontrols2 sliders.
This patch adds the related dependency
Change-Id: I50db8e6355ee02b61dcd7a4230fafc1fd060fe3d
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Use the correct IP address for the network test server that all the
other machines are using as well.
Change-Id: I1ffe4b6f5851bcb06dc2d39265979b799715ec3f
Task-number: QTBUG-59241
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Create release debug information for MSVC configurations for which we
build packages.
Also, for hard-to-reproduce autotest crashes in the CI enabling
ForceDebugInfo is crucial to get a meaningful backtrace.
Task-number: QTBUG-3934
Change-Id: Ie4ea7b9c6aa251a12796621817d8e3411bbed81d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This change also integrated latest dev branch of qtremoteobjects
and qtwebengine.
Conflicts:
.gitmodules
qtremoteobjects
qtwebengine
Change-Id: Ic6f97f43c55bdca5d8ac0481f3bb8a73429657b9
qemu is used to run unit tests for arm binaries in coin.
Change-Id: I8610b5d7603fa3bcd5cf0f9e83ee38e219b60a85
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conan provisioning fails on private Coin instance due to error message
Could not find a version that satisfies the requirement conan==0.16.0
(from versions: 0.15.0, 0.16.1, 0.17.2, 0.18.1, 0.19.3, 0.20.0, 0.20.1,
0.20.2)
No matching distribution found for conan==0.16.0
Upgrading to 0.16.1 resulted warning
"Your conan's client version is deprecated
for the current remote (v0.20.2). Upgrade conan client."
and provisioning failed with "ERROR: All remotes failed"
After upgrade to 0.20.2 conan provisioning script is working again.
Change-Id: I2fe9d65460954c929abb4822d206dde42909d5b3
Reviewed-by: Konstantin Tokarev <annulen@yandex.ru>
Changed Boot2Qt CI host from Ubuntu 14.04 to 16.04.
There is also changed the target architecture to x86_64.
Even though the meta-boot2qt builds binaries to the armv7 tests
are run in host machine using Qemu thus we spoof Coin to believe
we are running native binaries.
Change-Id: I633d01b80ec8ae753badf495ec8faa90b4659c11
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
~/versions.txt will be used to storage sw version information
Change-Id: Ia84e0fc55f5bbcf4afd902ce601556defcc565a0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Remove hard-coded path to pwd; there is no need to have it, and for example
NixOS doesn't actually have it at this location, leading to such an error:
./configure: line 36: /bin/pwd: No such file or directory
/qtbase/configure not found. Did you forget to run "init-repository"?
Change-Id: If3372db3390ba5f39c5003d12ff2a466f39ff353
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
starting with 5.7, it optionally comes with a qt designer plugin.
Change-Id: Idcc81b2688a1c09d3273b07a1ec991b54903e94c
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
There seems to be some issue with updating all submodules so update
qtbase and qtdeclarative only to get INTEGRITY compile
Change-Id: I079837a75f20e649f26b4b55d66e65edf0ba33a5
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The method (vmware tools) of launching a process inside a virtual
machine results in the launch of a process that does not originate
from a login shell. Therefore the CI system explicitly starts the
agent with "bash -l -c" to enforce the invocation as login shell
and thus execute settings from /etc/profile, ~/.bash_profile, etc.
This brings the behavior of the system closer to what we see as
developers.
However the shell is a non-interactive shell, therefore ~/.bashrc
is not read by default.
On Linux systems such as RHEL, ~/.bash_profile is configured to still
read ~/.bashrc.
For consistency we apply the same logic to the macOS configurations.
Task-number: QTQAINFRA-1091
Change-Id: I72206dbd8f7289de86830db23fa1ae2c548181eb
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
These exclusions belong in the individual modules.
Change-Id: Iaa868bf953f7bc3d72b6508272a18798a8569f4d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
As autotests pass, a subsequent commit will make
Ubuntu 16.04 replace Ubuntu 14.04 build targets.
Task-number: QTQAINFRA-1100
Change-Id: Ief659eec39f40873681ba617c37acf3662551fc1
Reviewed-by: Simo Fält <simo.falt@qt.io>
On this particular platform we get hard-to-reproduce autotest crashes in
the CI. Enable ForceDebugInfo to get a meaningful backtrace.
Change-Id: Ic9ca50394ad5708c3de4d26eb87d4c2a9d580b18
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
OpenGL32 update is needed for autotests to pass.
At least tst_qglbuffer vertexBuffer will fail without an update.
This update is already in place on Windows x86 and x64 CI hosts but
applied only to System32 -folders.
Change-Id: I223ffc53ecba77030385f29463c419acdc12e1a3
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Install both x86 and x64 libraries in order to enable Windows x86
builds on Windows x64 hosts. Environment variables are used by Coin.
Change-Id: Ied654efb2f33ab1c643f38a1ea50a127aeb7af7e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Install both x86 and x64 libraries in order to enable Windows x86
builds on Windows x64 hosts. Environment variables are used by Coin.
Change-Id: Idada7fc41202298c6f1b2919f0f4343b717e890a
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Install both x86 and x64 libraries in order to enable Windows x86
builds on Windows x64 hosts. Environment variables are used by Coin.
Change-Id: I8eea51a0bfd05bc72d1d004649211c7bc5901d97
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
qtgamepad will be officially supported with Qt 5.9
Change-Id: I3f941189881f2ab32ef10d4fff242e0d075798f3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The "-3" suffix for the configuration name is
due to it being a clean TIER1 image and has
not everything preinstalled manually.
Tests are disabled at first. They will be enabled
once we sort out all failing autotests.
Task-number: QTQAINFRA-1088
Change-Id: I7adc05869524acdff9ba295d604c3fc28a7aab99
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We have a duplicate of the same file, but different name.
Change-Id: Iedd70498a91bde0dddb05c33972fd21274399ae8
Reviewed-by: Akseli Salovaara <akseli.salovaara@qt.io>
Android tools and NDK is not needed in 10.11.
Task-number: QTQAINFRA-1087
Change-Id: I8f3f4e71492ea09828823f6ef70ab29faa08934c
Reviewed-by: Simo Fält <simo.falt@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Akseli Salovaara <akseli.salovaara@qt.io>
This script downloads a file from a given URL,
uncompresses it and installs it to a desired location.
Task-number: QTQAINFRA-1087
Change-Id: I466cb81ec6c96bb0d46329ec98dcc4f31be173ec
Reviewed-by: Akseli Salovaara <akseli.salovaara@qt.io>
Common install script for Visual Studio installation and
updates. Latest Visual Studio 2015 update is required
for releases
Change-Id: I5b41625ca7f161b4ba2d417797f8839ef175cdbc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QtWebKit requires CMake >= 2.8.12, while only 2.8.11 is available on
Windows 10 machines.
Task-number: QTQAINFRA-996
Change-Id: I734be4cc36f64dd5aeb243b0fbe4395c75c523b3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
(cherry picked from commit 77eeee64a4)
In 5.9 android builds will be using
RHEL 7.2 instead of 6.6
Task-number: QTQAINFRA-1096
Change-Id: Ia802aa31fe347616c829e2142991686fe8e95ed9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Without this Qt Speech is useless in our packages.
Task-number: QTBUG-58461
Change-Id: I5c93fae1b3a2987353c75865f1b0831114afedbf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Sdk and ndk version information will be storaged to versions.txt.
Versions.txt will be used for all provision scripts and later on it's
data will be printed to provision log.
Also script name changed to match both android sdk and ndk.
Change-Id: I3366e596f539099c3b587466d90905d0889398fe
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This script is the last script that is run by provisioning. It will
print all storaged sw information to provision log
Change-Id: I2c76d5f7cccf9c116cb660ffcb67d3bece473da8
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The most important changes that affect the CI are:
- Fixed bogus path in error message for failed targets.
- Fixed error "JobClient destroyed while still acquiring."
that could be yielded for failed builds.
- Fixed /k option (QTCREATORBUG-17131).
- Added the special .NOTPARALLEL target that disables parallel
build for the containing makefile. (This one is needed to
build QtWebEngine in debug-and-release properly.)
- Introduced the JOMFLAGS environment variable.
This is a MAKEFLAGS pendant. JOMFLAGS is useful to set up
separate flags for nmake and jom.
Change-Id: Icb2462d06b000a3fe29e1e9290b294cb1e900409
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
qtdeclarative has a runtime dependency, some tests rely on the svg
module being available, so in order to not reduce the test coverage,
revert this change.
I'd like to see a better/cleaner separation, but for the time being,
better coverage wins.
This reverts commit fbd782636b.
Change-Id: I60d6b585e25e2e7c4f6ad705b754279968827842
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Script to remove tier1's preinstalled software. Script itself includes
all information about the software that needs to be removed from tier2
before provision starts to run installations. When this script is run
for certain platform that platform needs to provision all removed
software back to tier2 template. So user needs to make sure that all
needed provision script are available when calling this removal-script.
Goal is to have vanilla os when provision don't need to remove any
software before installations. When this goal is reached this script
and script calls can be removed from provision.
Change-Id: I048909800807fabb1dc599e768a90e7457fbc2cf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This extends commit f3b0b9e292 to the
macOS and Windows platforms.
Change-Id: I180d81266897582cee1bec5938fbd3bb9c5c2ee3
Task-number: QTBUG-58367
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Installs latest Android sdk and ndk.
It also runs update for SDK API level 18, latest SDK- and platform-
tools and build-tools version 23.0.3.
Task-number: QTBUG-58369
Change-Id: Ib42f5149243fc5d262f6542e26726d1c8cbb2e8c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
RHEL7.2 was disabled due to blocking configure change.
Task-number: QTBUG-58073
Change-Id: Ic517d53bddecbcf035410d4f22a678ab72e0d44d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The method (vmware tools) of launching a process inside a virtual
machine results in the launch of a process that does not originate
from a login shell. Therefore the CI system explicitly starts the
agent with "bash -l -c" to enforce the invocation as login shell
and thus execute settings from /etc/profile, ~/.bash_profile, etc.
This brings the behavior of the system closer to what we see as
developers.
However the shell is a non-interactive shell, therefore ~/.bashrc
is not read by default.
On Linux systems such as RHEL, ~/.bash_profile is configured to still
read ~/.bashrc.
For consistency we apply the same logic to the macOS configurations.
Change-Id: I417ecd7866bc4ae1b50beb14c19b456588b4050a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Install latest Android sdk and ndk.
It also runs update for SDK API level 18
Task-number: QTBUG-58370
Change-Id: I1bf8cb42dd3e753be27fa9fcd2c1ac8ccbdb87c3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is required for new Bluetooth features in Qt 5.9+.
Change-Id: I2aa41117dfd93fc94d72012ca229bd2bc61f2bbd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This pulls in the CI build configurations.
These files were previously stored in the CI source tree, but they do belong
here. They describe the different configurations under which we want to build
Qt and its submodules, in terms of underlying virtual machine template, host
OS, target OS and CI related features that may also map to Qt configuration
features.
Task-number: QTQAINFRA-1074
Started-by: Simon Hausmann <simon.hausmann@qt.io>
Change-Id: I8ab9b987a28566ad036dcaf8f0663bd633fea439
This change also includes an update of the CI platform configurations to
the values that were previously in the CI source tree for builds of the
dev branch.
This is done within the same change as the merge to preserve atomicity.
Task-number: QTQAINFRA-1074
Change-Id: Ic47f7db3506ace4faca028b902d48cdb009c8495
This change also includes an update of the CI platform configurations to
the values that were previously in the CI source tree for builds of the
5.8 branch.
This is done within the same change as the merge to preserve atomicity.
Task-number: QTQAINFRA-1074
Change-Id: Iac469c44048721530380ab577c6dbf1a6fa28211
This change also includes an update of the CI platform configurations to
the values that were previously in the CI source tree for builds of the
5.7 branch.
This is done within the same change as the merge to preserve atomicity.
Task-number: QTQAINFRA-1074
Change-Id: Ie7bde30bd64d439cd17ea789102550ab9fb44194
These files were previously stored in the CI source tree, but they do
belong here. They describe the different configurations under which we
want to build Qt and its submodules, in terms of underlying virtual
machine template, host OS, target OS and CI related features that may
also map to Qt configuration features.
Task-number: QTQAINFRA-1074
Change-Id: I7ce48e3b15da757166eeac7531478d3746c8aa7f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Red Hat 6.6 needs cmake for GammaRay
OpenSUSE 42.1 and Ubuntu 14.04 needs cmake for pyside
Change-Id: I64b25be70057b86be7bfc96fb07446f7727bbefe
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Disable the windows search indexing service, which has a tendency to start
indexing source code archives that we've just extracted. We are not interested
in this service.
Change-Id: I1d3f5178a035bc951499d993641a9315db9712ca
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This will reduct the timeouts coin has had recently with win machines.
Change-Id: I32118f226194a3ea5e3c85d24103ec8341925d3c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This brings in the Android OpenSSL fixes to allow the use of newer TLS
versions with Qt, the conan manifest updates to allow for provisioning
to work as well as a few other fixes from the stable branches.
Change-Id: If2e4a1b8a4c8e44cd8d9b8918a3083cbaf1b385c
It turns out that they don't quite work the way we expected them to, and
instead we Coin is going to shut down the VMs directly at the right
time.
Change-Id: I9f7a6f2f898002a25544fc513a0c2414fcd5c263
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
To test successfully pyside dependencies with Coin, we need
python virtual env.
Change-Id: I59c620b7da9c78d2b5c55e233d75597b747a8e84
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
To test successfully pyside dependencies with Coin, we need
python-dev packages and virtual env.
Change-Id: I29a5eed769798da4e4799eb5ccdff1cd032070d5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We are currently using too old openssl for Android builds in Windows 7.
Openssl version need to be at least 1.0.1.
This script will configure openssl 1.0.2j for Android using tools
from msys.
Change-Id: I9ab9a3b4f9f3953cf99bf15fee631f5a7961b42d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Setting the idleTime on currentHost works well, until the hardware UUID changes
and thus the host ID for the setting. With kvm that happens quite frequently,
with vmware less but also occasionally (deep clone for example). By disabling
the screensaver on start-up we can cover all cases quite easily.
Change-Id: Ibdcf404430656f9caa47386ca3c732366ddfc8c7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
We want to quit machines without being asked, if we are
really sure.
Change-Id: Ic7156f5b0fe236c0270d8c2e4fcc322a82776caf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The directory names were missing the architecture, otherwise the content was
unused.
Change-Id: I0316da5c4b1352012f27ce330c3319a8aedf01ea
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
After provisioning we want the machine to be sensibly shut down since we
will use the disk image later. VSphere doesn't manage to shut down 10.8
VMs. Help out by calling shutdown.
For the other OS X/macOS versions, this is also desirable since
controlling the power state of these machines is hard with different
virtualization solutions (we're looking at OpenNebula/KVM).
Change-Id: Ieabc14f9c8c1af9421a0ef91dd670f4790a84461
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Conanfile is required for running "conan imports" as a part of "make install"
procedure, however its original location is unknown to build system of
module.
Conanfile is copied with its conventional name "conanfile.txt" to avoid
tying module build system to more qt5.git layout peculiarities. In
future we may want to have several conanfiles in one provisioning dir,
like qtwebkit-mingw.txt and qtwebkit-msvc.txt.
Also simplified syntax of PowerShell variables interpolation, $() is needed
only for interpolating expressions.
Task-number: QTQAINFRA-998
Change-Id: I6904e80f4f85bb5269b0830272c6eaa2c8100789
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* Use --no-imports when installing packages, imports will be performed
on "make install" step with new "conan imports" command.
* Add txt generator to all conanfiles because it will be needed for
"conan imports".
Change-Id: Ie5e7ac6bfbf14dfa32ce82136b6be5e39476e393
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
when used without the --branch option, we clone with --no-checkout, to
avoid unnecessarily checking out files twice when the recorded sha1
doesn't happen to be the tip of the default branch. however, that would
leave the index in a dirty state which would make the subsequent
submodule update abort at some point, silently.
to deal with the problem, we ignore this type of index dirtyness and use
submodule update with --force.
Task-number: QTBUG-57289
Change-Id: I6fc9693b0eaadfb04d2d80f9c8f1f2e11be47ae9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
the operation would later error out anyway, after spending a lot of time
fetching the remotes, and leaving a partially updated state behind.
Change-Id: Ib2a688e446a9bd4ba3b15fc73082224433c18388
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QtWebKit requires newer Ruby than version installed on Windows 7 builders.
Install the same version as is installed on Windows 10 builders.
Task-number: QTQAINFRA-997
Change-Id: Id8e5d47028ef8403bb28daf1446d95dc8f2ab564
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fix building on OpenSuse after openssl update.
Every linux distro seems to patch openssl in a different way to deal with
broken/outdated SSL issues. We seem unable to detect what suse did when
running configure, so this is a stop-gap measure.
Change-Id: I5e375e9c5c1615358dbce0b8dd91476cb4f4e45b
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If Python is not deinstalled cleanly (01-windows_removethemall.ps1
just erases installation directory) pip is not bootstrapped by new
installation. Fix it by running ensurepip module.
Change-Id: I3a7ed87eed30118876d7022eed94b8a571677529
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Order of files really matters in configuration directories, but I
renamed only main implementations in previous commit. Fixed that.
Change-Id: Ia541fa8fd36b3d52580ba9814e9f4c38aadce460
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This allows us to get it working on 32-bit Windows.
Also renamed conan.ps1 and python.ps1 to get proper provisioning order.
Change-Id: I2f21db7dd0edbacb4e44024d1c70b315fba55801
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This check allows us to ensure authenticity of installed files.
Manifests are sorted to minimize diffs in future updates.
Manifests lack trailing newline, because adding it would break manifest
parser of conan 0.15.0.
Task-number: QTQAINFRA-998
Change-Id: I6db75a78ce552da29d63cc4ac03726df326b7be2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
there is no point in re-fetching all repositories just because an update
failed due to local modifications.
Change-Id: Ie9883586d77f3310058353844f0bbcfb0b775ebb
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the .gitmodules of tagged commits typically refers to a release branch
which was deleted shortly after the release. consequently, git clone
--branch is bound to fail.
of course, cloning a fixed sha1/tag requires no branch in the first
place, so revert back to using git clone --no-checkout in that case.
amends ac6168c0c.
Task-number: QTBUG-49133
Change-Id: Ica032f1d07a70ad89f16b23bdf5cdab785612fdc
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no build dependency on QtSvg in qtdeclarative or qtquick1, so
don't recommend it for builds. QtSensors on the other hand has an
example that does need svg.
This does not change anything in the big picture, the svg module will be
built as always and svg files will be displayed. The change is the
ordering of builds (leave more room for parallelization).
Change-Id: I50e527e03a75742036d5f914611d0b34437a8e3a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Fixes broken build caused by qtquick1 not being in sync with interface
changes in qtbase.
Task-number: QTBUG-56642
Change-Id: I972bcef2564c4f9bd7abe1a3e38c77339aaf30e9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Since qtdeclarative seems to trigger a crash in qtquickcontrols' tests,
leave it out for now, just to see some progress.
Change-Id: I8799f0ae70ad9b78f5be4cb7a53cbeac7df3295b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
When MSVC is not autodected, necessary setting compiler.runtime has
undefined value, breaking installation of packages. This setting is not
supported by MinGW, so it should be optional.
Task-number: QTQAINFRA-998
Change-Id: Ia1a09eee14275314c160c7c45cd6ab276367dcdb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
PowerShell runs .exe's asynchronously by default, unlike all other commands.
This behavior creates race condition when conanfile processing starts before
conan installation is completed. Addition of "| Out-Null" to installer
invocation makes it synchronous.
Task-number: QTQAINFRA-998
Change-Id: Ic423514f15886e6ad9eb5c9422dd5382a3362380
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This actually breaks conan integration in Coin instead of fixing it.
This reverts commit b0b0c9c471.
Change-Id: Ifbdc9dbfd89d5b670221463e6d303691ad45936d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Installs Python version 2.7.10.
Python is required for building Qt 5 from source. More
specifically qtdeclarative and qtwebkit require it.
Change-Id: I63c8f3294a8a4799df5e52fbd41a36db8686950e
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
QtWebKit requires CMake >= 2.8.12, while only 2.8.11 is available on
Windows 10 machines.
Task-number: QTQAINFRA-996
Change-Id: I734be4cc36f64dd5aeb243b0fbe4395c75c523b3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It is a dependency of tqtc-boot2qt/qdb, which will join CI soon.
Change-Id: I3b205877e705f554202ab7171f9d828491b95ac6
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Keep conanfiles self-contained. "txt" generator is not going to be used
by coin internally, drop it.
Task-number: QTQAINFRA-998
Change-Id: I80ffb7342e07d8ef883bed6de77ac9646479f145
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
this includes moving the -skip option here, where it belongs.
the implementation is a bit hacky, but the proper one would be vastly
more complex: we'd have to load all modules, then parse the command
line properly (the -skip parsing would be a custom callback, to avoid
needing to process features), then discard all now excluded modules
again, then re-process the command line (so we can complain about
options which are now invalid), and only now proceed with the actual
feature processing.
that seems a bit over the top, so we accept that -skip cannot be the
argument of another option, which seems quite reasonable.
Change-Id: I0053658e6d7e11b82cdfe55893cb553b664a9298
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
QtWebKit will use Conan to install 3rd party dependencies like ICU.
Task-number: QTQAINFRA-997
Change-Id: I4b9bfeb86b28abfdef52afcf249428c3ec41f32a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QtWebKit requires newer Ruby than version installed on Windows 10 builders.
Task-number: QTQAINFRA-997
Change-Id: Id4f917a824daaab4aeb1445a3a16906663208b6d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Install latest Android sdk and ndk.
It also runs update for SDK API level 18, latest SDK- and platform-
tools and build-tools version 23.0.3.
Build-tools version 23.0.3 is the latest usable version
for Red Hat 6. Newer version of build-tools, version 24.x.x,
requires GLIBC_2.14, which is not available in Red Hat 6.
Change-Id: Iddc353674a65e0af7a9036d9296b9c2933fa114f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QtSystems is not a supported module at the moment, and the code in
QtLocation to utilize QtSystems is behind an #ifdef and destined for
removal.
Change-Id: Ide44f138638ccd751044c13c289f1e116641a23e
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Note that this also contains the adjustment of the branch for the
latecomers qtspeech and qtnetworkauth.
Change-Id: Ia77eb4d47a6ad66cb35e50ae03af751f46a805a8
There was a bug in RHELs subscription manager that caused yum
not to work by fetching incorrect data into the sslclientkey repository
parameter value.
This provisioning script fetches new data for the repository and thus
fixes yum. Naturally by not having a template where a bad repository
exists, this script would be obsolete. Also, as this needs to be run
before any other scripts using yum, prefixes were added to the scripts.
Change-Id: I5c6ed1d43451d2918f9b6dad22b0106339f36aea
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The execution policy is set by the CI. The command usually fails as it
is in the scritps right now since it must be run as admin.
Change-Id: Ie31cb7fc15720cc6d76646bf475b3d60a02014d8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The list is not up to date (e.g. ICU is not required on Windows anymore),
and woefully incomplete. Better just link to the wiki/documentation.
Task-number: QTBUG-54084
Change-Id: I6b22fc1c84d40b892503085cb023a7db25fd19c8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Meaning: to unattended use, so no crash dialogs will pop up. In a later
change we can suppress QTest from generating stack traces when this
setting is *not* in server mode (meaning: the OS will take care of the
stack traces).
Change-Id: Idee9311f866228cd35ecb07889f1c19424981221
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
That is needed to change provisioning way in Coin, as currently it
depends on variables hard-coded in Coin agent.
Change-Id: I0bc5c76717e994824b85a4353a7218db4b648344
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
That is needed to change provisioning way in Coin, as currently it
depends on variables hard-coded in Coin agent.
Change-Id: I15068bec57dd9d67be05ef753d566b456fb8a2fc
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The right term is "ignore" in order to ignore the module, not "ignored".
Change-Id: Idd4a887834fc98fffb2b9e8385308aa676ba3adf
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It was agreed at the Qt Contributor Summit 2015 that QtQuick1 will be
removed completely from the packages and not even compiled during
qt5.git integration.
Enginio is also removed from 5.7.0 so ignoring it as well
Change-Id: I80ac88d28f811fbf731e33d4d4353a249ad6d29a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Previously we expected gitdir to be always absolute. This patch fixes
git_install_hooks in case of relative gitdir.
Change-Id: Ia0883af18229703aaa22c62fd2181ed56d9f2fce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
another thing the doc claims to be possible - also quite reasonably.
Change-Id: I2220245b10f02a778345b6549e345b2486630ffd
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
the doc - quite reasonably - claims that it is possible.
Change-Id: I4668b3feafe721f1db4deb65848206d8197962c8
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
That is translation from coin-setup golang code to sh script
Change-Id: Ic26d3877e56feb8b7f8e3ccd3405a044fb6afd8e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Introduce new "deprecated" value for status attribute.
We have two flavors of big source packages we need to produce:
qt-everywhere-* which needs to include:
- essential
- addon
- preview
- deprecated (e.g. qtscript and qtenginio for Qt5.6 release)
Installer only specific source package:
- essential
- addon
The rest (deprecated, preview, ...) need to be shown as split src
packages in the installer.
The above leads to the following changes:
qtscript: addon -> deprecated
Needs to be part of big src packages but excluded from installer
specific big source package.
qtenginio: obsolete -> deprecated
We can't exclude this module from qt-everywhere src packages.
qtwayland: preview -> addon
Needs to be part of installer specific big src package and the
module status is not preview anymore.
Change-Id: I52e10629bf81860f56ebc4ce9d395e0ca54c4264
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
If Qt3D finds QtGamepad, it will use it to build gamepad support.
Change-Id: Ifbc40e5e04a6030d25c2d429878d4fb3a3dd11a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the primary purpose of this change is making it work with new-style
submodules (1.7+) and git-worktree (2.5+). this means resolving '.git'
and 'commondir' files.
we avoid calling git commands, because a) it's slow on windows, b) some
of them are unavailable in older git versions and it's tedious to deal
with that and c) their output is not necessarily optimal (not always
absolute paths).
we also don't use relative paths for the hook locations any more, as
that's too tedious to deal with.
Change-Id: Ie341e748e56d6bef40856e4a49ac368850028d83
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
all repos which are released (whichever way) need release branches.
and vice versa.
also, it needs to be the *right* release branch.
Task-number: QTBUG-50695
Change-Id: Id7b5d106d2d9bdf70e9d5276e205a3c7ea827144
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Robert Loehning <robert.loehning@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
instead of a simple bool, we now have five states: preview, active,
addon, obsolete, and ignore (the default). the default includes the
first three.
the CI system is expected to use --module-subset=all,-ignore to include
everything that is expected to build (in some configurations).
Change-Id: Ifb43412054a8e42db0425f24f8e53acfce363caa
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
this removes the last redundant module list.
the module build order which is not determined by dependencies is pretty
random now. this is avoided for a few heavy and "less relevant" modules
by setting a priority to built them as late as possible.
Change-Id: Ie8ef9777d050a4915cd2282dc9ccb48fcdbc02d2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
we want to move to a purely declarative way to declare submodules, so
the conditional has to go.
instead, use an optional dependency to ensure build order, while the
module excludes itself via requires() if its dependency is missing.
Change-Id: I615382700ff601c9ab003d131b2cc600441c514c
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
In order to bring in the missing libs for QTBUG-48914
Change-Id: I678dcd1ca5bdae66efdd09b809ff63c7da37d58a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Fixes some nasty threading problems related to pick event race
conditions and QThreadPool thread recycling.
Change-Id: I977ad310d1a767abc0fbcca49f9088ff5fdda708
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This brings in MSVC 2015 fixes and RHEL/OpenSuSE build fixes
Change-Id: I796c153a005e964c4a32203cfe08cbf3ece5f39e
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Add build instructions for commercial licensees as well so that the
same README covers both opensource and enterprise users.
This removes the need having separate README file for commercial users.
Change-Id: Ibd3012b428c6fa85f47c1c459d8029ebfce92046
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This caught me out the first time I tried to use init-repository.
Documentation should work for noobs.
Change-Id: Ia6c9ce395ace034128bfe80f2c31be7f9cd4cf35
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The current way requires passing -skip to configure, which is a list
of what not to build. To set a list of what to build (e.g., for
testing, in a specialized build, etc.), there was no way. Now you can
just do:
qmake "QT_BUILD_MODULES=qtbase qtdeclarative qtsvg qtxmlpatterns"
(the order doesn't matter)
Change-Id: Ifcaefa35b16b137866ca839a483ce366e35de7ab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
For 5.6 this is a tech preview, it will be added properly in 5.7.
Change-Id: I709830fbcfc439d5446718093f0c16ad2dcb1e57
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
QtWebkit (and QtWebkit-Examples) were deprecated in Qt 5.5 and will now
be removed from qt5.git in Qt5.6 release
Change-Id: I86e1072141956136fa5e4220cdcdf812492453b3
Reviewed-by: Tuukka Turunen <tuukka.turunen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QtQuick1 was deprecated in Qt 5.5 and will now be removed from
default modules in qt5.git
Change-Id: I88aa9d75ace8d91b4cd469d7511662425e67d95f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
LGPLv3 refers to it but does not include it in its body.
Change-Id: Ib056b47dde3341ef9a52ffff13eed18cf3504738
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This is a prerequisite to making qtgraphicaleffects a dependency in
qtquickcontrols' sync.profile.
Task-number: QTBUG-46393
Change-Id: I3679392a7feb48ecefa4a01a7ecb42b2e6287ecb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The win_flex/win_bison tools are already in the repository and working
with all projects, so the GnuWin32 versions can be removed and the
winflexbison versions can take their place.
Task-number: QTBUG-46852
Change-Id: I41bc541adab834ff83912d7a4f076a87fc174601
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
With the correct modules checked out 'make module-qtlocation' will build
everything necessary to run the examples.
Change-Id: I0c63221b5704c2b13495f3dc3221e888d8e9547c
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
This way qtwebkit can be built when qtdeclarative is disabled. This is
especially useful for targets without OpenGL.
Also add qtxmlpatterns to the optional dependencies. It was an indirect
dependency before via qtdeclarative.
Change-Id: Ib4c29b958bd63d528fba8ec326e2dbc1ea8bce08
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
This fixes failed execution when the Qt sources are exported to
Windows over a network share or attempted to be executed on a Linux
system using binfmt.
Change-Id: I00b1073e516d2441498a39cc13e4295484e1ef9d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This version is required by upstream ANGLE. win_bison conveniently uses a
different executable name as the existing bison copy, avoiding conflicts.
Change-Id: I2897ce97aef6795933d3ab8b5570a8494a55523e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When cloning qtdeclarative, we end up also cloning qtdeclarative-testsuites,
which is not intentional for users of Qt (and init-repository). The init-repository
script checks for the submodule "repo".update key and skips the sub module if the value
is "ignore". However according to the documentation no checkout is to be done if the value
is "none", which is also what qtdeclarative's .gitmodules specifies for the ecmascript
test suite.
Change-Id: Ieb37607ae4ea7c32d6af886d3e2533fb9dea1f13
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
git submodule update does not cause an actual checkout if HEAD matches
the recorded submodule sha1 even if it was not actually checked out.
it would be possible to work around this by calling git checkout HEAD in
each submodule if no files are checked out, but that seems hacky.
instead, just make the module cloning already check out the desired
branch. this produces checkouts that are within a few commits of the
final sha1, so isn't too bad.
Change-Id: I435c1a2e24f39fd8c0d65f0d90df0216715668b7
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Change-Id: Ieb3be34b0d4061fb8dc886991528951f59dbd67e
Reviewed-by: Tuukka Turunen <tuukka.turunen@digia.com>
Reviewed-by: Iikka Eklund <iikka.eklund@theqtcompany.com>
[ChangeLog][General] Added QtCanvas3D module, a JavaScript 3D rendering API for QtQuick.
Change-Id: I9448f87ba8c8ccfb2dd6cf790d29bb561b9e9740
Reviewed-by: Pasi Keränen <pasi.keranen@digia.com>
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
To allow using the integration that makes use of a custom transport over
Chromium IPC.
Also add QtLocation as an optional dependency for correctness, and
update the pinned sha1
Change-Id: I71d88be0859a74ad82f539d00f02b51d1c3e5218
Reviewed-by: Andras Becsi <andras.becsi@theqtcompany.com>
we already did it a moment ago.
this should affect only the --remote case, but there is no harm in
always specifying it.
Change-Id: I3ef0854c790726772fb63ab7829b59ef85ac4f18
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
we will subsequently do a submodule update with a possibly different
sha1 anyway.
Change-Id: I4950f3727e4263a73c32eff8460962d5796bc5f3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
it is in no way said that the remote's HEAD will contain the commit to
be checked out - in fact, it's pretty much guaranteed that it won't for
anything but the default branch. fetching the whole remote avoids
additional roundtrips and makes the --branch feature actually work
reasonably.
Change-Id: I20de2da848b12aea8c5b2784307fe9860252009b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
a submodule update with --remote will use the tip of the remote's
branch, but it won't actually switch to the branch if HEAD doesn't point
to it yet.
Change-Id: If13e31da2646683dfb9e832eaab929190acb0167
Reviewed-by: Sergio Ahumada <sahumada@texla.cl>
clearly, i botched the syntax, but i can't even tell how. that's perl.
the new version is more readable anyway.
Change-Id: Ic3e93c2cf30ee92f368808070899af4b9f7809a3
Reviewed-by: Sergio Ahumada <sahumada@texla.cl>
Qt3D makes use of the webp image format in its examples to minimize
the size of assets. Support for webp is provided by qtimageformats.
Change-Id: Id70b584123dc6174848947029ee034593ccc42e0
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
The decision to exclude wince builds from Qt is one the modules
have to do and not the "build system". While there might be
justification to do this for some modules the decision is a module
decision and as such the individual modules should make it.
This reverts commit d870bd65b0.
Change-Id: I60fd9944a71968c819a27da91fdc58923bbbb776
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 486f5f37761 broke the cloning with one of the mirror options:
git ls-remote git://mirror/qt/qtactiveqt.git.git test/if/mirror/exists
fatal: The remote end hung up unexpectedly
Change-Id: Ia154ee34dd10e35b24676777d8dde98ef0790ee1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
specifically, add the --branch option and the necessary keys to
.gitmodules.
Change-Id: I09e2df6bd012629f76a35238d66697637bdffe44
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Don't just check if the submodule folder exist, since that doesn't
qualify it for being a valid git repo.
Change-Id: Ia3902714a0554908c0b8fd3228ed6fc2cfddd344
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This patch forces the C locale before calling 'git submodule'
in order to get the non localized string 'Entering' that we filter out.
Change-Id: I46d3770956a6b07e574ad15549bbb8942285b800
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
git-submodule init will simply not touch the already initialized
submodules. this is just fine, as we'll overwrite the config entries
with our own urls (and remove the obsolete ones) afterwards anyway.
Change-Id: I6372bd48be9792e456899dc829226921990140c4
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
it's backwards to keep this in the script itself.
Change-Id: I4248ba3fef984bdff5d034cb2e6db6cae3209d68
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
we now have everything we need to construct it on the fly.
Change-Id: I129e49bbcf46428d0fcef31ab8188df9d6a4026c
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
keeping a redundant copy in the script is plain backwards.
Change-Id: Ibdd1bab9d2cb5af7d7747d5caa2afc7d6e7571ad
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
instead of doing multiple passes over the submodules, do everything in
one go.
as a bonus, as the internal structure uses exclusion entries in the
module list, we can make that feature user-accessible just as well.
Change-Id: I8bfb30c8051a9150f92e2e124ff52f64e3efe03c
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
it was a vestige from the times when the submodules had absolute urls
pointing at git://gitorious.org. as we now use relative urls, things
work just fine without that option.
Change-Id: I5e93ff8cd2497a27cfbdd53dbcf9db3cd0c4cd1d
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Since git 1.7.8 the $GIT_DIR of the submodule can be a reference to the
super-module's $GIT_DIR/modules/<name>/
Test for existence instead of testing for a directory before attempting
a git clone there.
Change-Id: Ic539e770067da1417a2ad374c21253212473abe6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qtwebkit is listed as an optional dependency for
qtwebengine to ensure that qtwebkit and qtwebengine
are not linked in parallel on the CI system.
Otherwise we could run out of memory.
Change-Id: Ib80d72407df03037c928d99f55c8e04e98e506d9
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
QtWayland is going to be released with Qt 5.4.
Change-Id: I9a9bead92c6c34324510007ad844c9fdf633690d
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
This is required to prepare the merge of the integration patch.
The QtWebChannel and QtWebSockets lines in qt.pro are moved such
that they occur before their first use in QtWebKit.
Change-Id: Ie8137da57827776fe7b1434538df6b08108b0349
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Unless we do so, doing git submodule init in a submodule would use the
currently checked out version of its .gitmodule instead of the one of
its pinned SHA1.
Change-Id: I88de421c8d24748dcaa5334c82da2aac4b12b2ad
Reviewed-by: Andras Becsi <andras.becsi@digia.com>
This allows repositories that have a different submodule name than their
URL file part to be using the mirror.
i.e. qtwebengine's src/3rdparty mapped to .../qt/qtwebengine-chromium.git
Change-Id: Ibea9cb9db701c95fc6f8b0e2457de74823aeeba5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This also updates the qtwebsockets revision since
that's needed to compile.
Change-Id: I9f3564c78d08abdca73ce395f31b3031a829e502
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
it's a soft dependency and it appears to be properly checked in the
subprojects.
Task-number: QTBUG-38616
Change-Id: I5ada1f91247ba3668015e95d6da9c5996f1a138c
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
QtLocation no longer depends on Qt3D.
Change-Id: I0418dcc93a97722948bddcdd4f754914d7eaa019
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Also update qtenginio to the latest stable sha1.
Change-Id: Ia60a65c1a66a1b157240cc7ef519dc0c20d36567
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
unlike previously thought, gerrit does not remove recognized reviewers
who did not actually make a review. so better not suggest adding
potentially misleading footers.
Change-Id: I92d2833ca8888a2c2c09dfacb0cff122cad1eb15
our CONFIG+=build_pass hack has the side effect that qmake does not emit
the calling command line to the makefile, which makes creator unable to
detect the build. so revert the hack as soon as it did its deed.
Task-number: QTBUG-34788
Change-Id: I4c0fd28d661ca5049f31d5405e84525efb12fd4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
move it even futher up and encourage integrating it into the rest of the
commit message.
Change-Id: I5aaa417a58d420c3d3a8d5ca80dcd9f265c64829
Reviewed-by: Sergio Ahumada <sahumada@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
# Install Visual Studio $version with $update_version
# Original download page: https://www.visualstudio.com/en-us/news/releasenotes/vs2015-update3-vs
$version="2015"
$update_version="3"
# Only way to install specific Visual studio release is to use feed.xml.
# Visual Studio $version setup will use the feed.xml that was available when $update_version released -> 'https://msdn.microsoft.com/en-us/library/mt653628.aspx'
# These parameters will install Visual Studio Enterprise Update $update_version (the original Update $update_version without any further Update $update_version-era updates)
# Install Visual Studio $version with $update_version
# Original download page: https://www.visualstudio.com/en-us/news/releasenotes/vs2015-update3-vs
$version="2015"
$update_version="3"
# Only way to install specific Visual studio release is to use feed.xml.
# Visual Studio $version setup will use the feed.xml that was available when $update_version released -> 'https://msdn.microsoft.com/en-us/library/mt653628.aspx'
# These parameters will install Visual Studio Enterprise Update $update_version (the original Update $update_version without any further Update $update_version-era updates)
security find-certificate -a -p /Library/Keychains/System.keychain | sudo tee -a $opensslTargetLocation/ssl/cert.pem > /dev/null
security find-certificate -a -p /System/Library/Keychains/SystemRootCertificates.keychain | sudo tee -a $opensslTargetLocation/ssl/cert.pem > /dev/null
{ wget -q -e "http_proxy=$proxy" --spider proxy.intra.qt.io &&echo"Setting http_proxy to $proxy"&&exporthttp_proxy=$proxy;}||echo"Proxy not detected at $proxy"
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
